Go to page of
Similar user manuals
-
Server
HP (Hewlett-Packard) BL490C G6
100 pages 2.31 mb -
Server
HP (Hewlett-Packard) rx9610
49 pages 0.34 mb -
Server
HP (Hewlett-Packard) ML350 G5
30 pages 0.28 mb -
Server
HP (Hewlett-Packard) DL360
43 pages 0.95 mb -
Server
HP (Hewlett-Packard) BL460c
33 pages 0.7 mb -
Server
HP (Hewlett-Packard) BL460C G7
106 pages 2.18 mb -
Server
HP (Hewlett-Packard) BL890C I2
157 pages 3.39 mb -
Server
HP (Hewlett-Packard) 686714-S01
66 pages 1.74 mb
A good user manual
The rules should oblige the seller to give the purchaser an operating instrucion of HP (Hewlett-Packard) BL260c, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.
What is an instruction?
The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of HP (Hewlett-Packard) BL260c one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.
Unfortunately, only a few customers devote their time to read an instruction of HP (Hewlett-Packard) BL260c. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.
What should a perfect user manual contain?
First and foremost, an user manual of HP (Hewlett-Packard) BL260c should contain:
- informations concerning technical data of HP (Hewlett-Packard) BL260c
- name of the manufacturer and a year of construction of the HP (Hewlett-Packard) BL260c item
- rules of operation, control and maintenance of the HP (Hewlett-Packard) BL260c item
- safety signs and mark certificates which confirm compatibility with appropriate standards
Why don't we read the manuals?
Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of HP (Hewlett-Packard) BL260c alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of HP (Hewlett-Packard) BL260c, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the HP (Hewlett-Packard) service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of HP (Hewlett-Packard) BL260c.
Why one should read the manuals?
It is mostly in the manuals where we will find the details concerning construction and possibility of the HP (Hewlett-Packard) BL260c item, and its use of respective accessory, as well as information concerning all the functions and facilities.
After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.
Table of contents for the manual
-
Page 1
HP Pr oL iant BL2 6 0c Gener ati on 5 S er v er Blade User G uid e Part Number 459407- 001 March 2008 (First Edition)[...]
-
Page 2
© Copyright 2008 Hew lett-Packard Development Company, L.P. The in formati on con taine d herein is su bject to chan ge with out not ice. T he only w arrant ies for HP pr oducts and ser vices ar e set forth in the express warran ty stat ements a ccompan ying such pr oducts and s ervic es. Noth ing her ein shou ld be constru ed as constit uting an [...]
-
Page 3
Contents 3 Con t e n t s Componen t identification ....................................................................................................... ........ 6 Front pan el compon ents ................................................................................................................................ 6 Front pa nel LEDs and button[...]
-
Page 4
Contents 4 SmartStart s oftware ............................................................................................................ .............. 42 HP ROM -Based Setup Util ity ..................................................................................................... ......... 43 Embed ded SATA R AID...........................[...]
-
Page 5
Contents 5 Regulatory compliance no tices .................................................................................................. ... 7 4 Regulatory com pliance i d entific ation n umbers ................................................................................... ............ 74 Federa l Commun icati ons Com mission notice ......[...]
-
Page 6
Component identification 6 C omponent i dentif i cati on Front panel components Item Description 1 Serial label pull tab 2 HP c-Class Blade SUV Cable connector 3 Release button 4 Server blade handle[...]
-
Page 7
Component identification 7 Front panel LEDs and buttons Item Description Status 1 UID LED/button Blue = Identified Blue fla shing = A ctive remote manageme nt Off = No act ive remot e management 2 Health LED Green = Normal Green flashing = Booting Amber flashi ng = Degraded con dition Red flashin g = Critical co ndition 3 NIC 1 LED Green = Network [...]
-
Page 8
Component identification 8 System board components Item Description 1 System board thumbsc rew 2 Processor socket 2 (with blank) 3 DIMM slots (6) 4 Hard drive data con nector 1 5 Hard drive data con nector 2 6 Hard drive power con nector 7 USB co nnector 8 Embedded NICs (2) 9 Mezzanine connector (Typ e II mezzanine cards only) 10 Enclosur e connect[...]
-
Page 9
Component identification 9 Position Fu nction Default 5 Password disabled Off 6 Reset configura tion Off 7 Reserved Off 8 Reserved Off When the system maintenan ce switch position 6 is set to the On position, the system is prepared to erase all system configuration settings from both CMOS and NVRAM. CAUTION: Clearing CMOS and/or NVRAM del etes conf[...]
-
Page 10
Operatio ns 10 Oper atio ns Power up the serve r blade The enclosure initiates an automatic power-up sequence when the serv er blade is installed. If the default setting is changed, use one of the followi ng methods to power up the server blade: • Use a virtual power button selection through iLO 2. • Press and release the Po wer On/Standby butt[...]
-
Page 11
Operatio ns 11 Remove the server blade To remove the component: 1. Identify the proper server blade. 2. Power down the server blade (on page 10 ). 3. Remove the server blade. 4. Place the server blade on a flat, level work surface. Remove the access panel To remove the component: 1. Power down the server blade (on page 10 ). 2. Remove the server bl[...]
-
Page 12
Setup 12 Setup Overview To install a server blade, complete the following steps: 1. Install and configure an HP BladeSystem c-Class enclosure. 2. Install any server blade options. 3. Install interconnect modules in the enclosure. 4. Connect the interconnect modules to the network. 5. Install a server blade. 6. Complete the server blade configuratio[...]
-
Page 13
Setup 13 Interconnect bay numbering and dev ice mapping • HP BladeSystem c7000 Enclosure • HP BladeSystem c3000 Enclosure To support network connections for specific sign als, inst all an interconnect module in the bay corresponding to the embedded NIC o r mezzanine signals. Server blade signal c7000 interconnect bay c 3000 interconnect bay Int[...]
-
Page 14
Setup 14 For detailed port mapping information, see the HP BladeSystem enclosure installation poster or the HP BladeSystem enclosure setup and installation guide on the HP website ( http://www. hp.com/go/bl adesystem/doc umentation ). Connecting to the network To connect the HP BladeSystem to a network, ea ch enclosure must be conf igured with netw[...]
-
Page 15
Setup 15 2. Remove t he enclosure connector cov er. 3. Prepare the server blade for installation.[...]
-
Page 16
Setup 16 4. Install the server blade. Completing the configuration To complete the server blade and HP BladeSystem config uration, see the ov erview card that ships with the enclosure.[...]
-
Page 17
Hardware options in stallation 17 Har d w ar e opti ons ins tallati on Introduction If more than one option is be ing installed, read the installation instructions for all the hardware options and identify similar steps to stre amline the installation process. WARNING: To reduce the risk of personal injury from hot surfaces, allow the dr ives and t[...]
-
Page 18
Hardware options in stallation 18 5. Remove the hard drive cage/bezel as sembly. 6. Open the hard drive cage.[...]
-
Page 19
Hardware options in stallation 19 7. Install the hard drive. 8. Connect the cable to the hard drive and close the hard drive cage.[...]
-
Page 20
Hardware options in stallation 20 9. Locate the T-15 screws on the hard drive cage/bezel as sembly. 10. Install the four T-15 screws.[...]
-
Page 21
Hardware options in stallation 21 11. Install the hard drive cage/bezel assembly. 12. Route and connect the hard driv e data an d power cable to the system board. 13. Install the access panel (on page 11 ). 14. Install the server blade (" Installing a server blade " on page 14 ). 15. Determine the status of the hard driv e from the hard d[...]
-
Page 22
Hardware options in stallation 22 CAUTION: To avoid damage to the system board: • Do not touch the processor socket contacts. • Always install the processor socket cover afte r removing the processor from the sock et. • Do not tilt or slide the processor when lowering the processor into the so cket. CAUTION: To avoid damage to the processor: [...]
-
Page 23
Hardware options in stallation 23 5. Disconnect the hard drive cable power and data cable from the system board. 6. Remove the hard drive cage/bezel as sembly.[...]
-
Page 24
Hardware options in stallation 24 7. Remove the heatsink blank. Retain the heatsink blank for future use. 8. Open the processor retaining latch and th e processor socket retaining bracket.[...]
-
Page 25
Hardware options in stallation 25 9. Remove the processor socket protective cover. IMPORTA NT: Be sure the processor remains in side the processor installation tool. 10. If the processor has separated from the installation to ol, carefully re-insert the processor in the tool.[...]
-
Page 26
Hardware options in stallation 26 11. Align the processor installation tool with the socket and install the processor. 12. Press down firmly until the processor installation t ool clicks and separates from the processor, and then remove the processor installation tool.[...]
-
Page 27
Hardware options in stallation 27 13. Close the processor so cket retaining br acket and the processor retaining latch. 14. Remove the thermal interface protective cover from the heatsink. CAUTION: Heatsink retaining screws should be tigh tened in diagonally opposite pairs (in an "X" pattern).[...]
-
Page 28
Hardware options in stallation 28 15. Install the heatsink. 16. Install the hard drive cage/bezel assembly.[...]
-
Page 29
Hardware options in stallation 29 17. Route and connect the hard driv e data an d power cable to the system board. 18. Install the access panel (on page 11 ). 19. Install the server blade (" Installing a server blade " on page 14 ). Memory options You can expand server memory by installing PC2-5 30 0 Registered DDR2 SDRA M DIMMs. Each ser[...]
-
Page 30
Hardware options in stallation 30 • The following table lists all support ed combinations of single- rank, dual-rank, and quad-rank DIMM configurations. "Single" indicates a slot/bank with a single-rank DIMM. "Dual" indicates a slot/bank with a dual-rank DIMM. "Quad" indicate s a slot/bank with a quad-rank DIMM. Conf[...]
-
Page 31
Hardware options in stallation 31 6. Install the access panel (on page 11 ). 7. Install the server blade (" Installing a server blade " on page 14 ). Mezzanine card option Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards. The server blade supports only Type II mezzanine cards. Optional mezzanin[...]
-
Page 32
Hardware options in stallation 32 5. Install the mezzanine card. Press down on the connector to seat the board. 6. Install the access panel (on page 11 ). 7. Install the server blade (" Installing a server blade " on page 14 ).[...]
-
Page 33
Cabling 33 Cabl in g Hard drive cabling CAUTION: When routing cables, always be sure th at the cables are not in a position where they can be pinched or crim ped. Using the HP c-Class Blade SUV Cable The HP c-Class Blade SUV Cable enables the user to perform server blade administration, configuration, and diagnostic procedures by connecting v ideo [...]
-
Page 34
Cabling 34 Numerous configurations are possi ble. This section offers two po ssible configurations. For more information, see "USB support and fun ctionality (on page 52 )." Accessing a server blade wi th local KVM For this configuration, a US B hub is not necessa ry. To connect additional devices, use a USB hub. CAUTION: Before disconnec[...]
-
Page 35
Cabling 35 1. Connect the SUV cable to the server blade. 2. Connect the video connector to a monit or. 3. Connect a USB hub to one USB connector. 4. Connect the following to the USB hub: o USB CD/DVD-ROM drive o USB keyboard o USB mouse o USB diskette Item Description 1 Monitor 2 USB mouse 3 HP c-Class Blade SUV Cable 4 Server blade 5 USB hub 6 USB[...]
-
Page 36
Configura tion and utilities 36 C onf igur ati on and u tiliti es Server blade deployment tools Software drivers and addi tional components HP offers the following additional soft ware components for server blades: • Health and Wellness driver and IML viewer • iLO 2 Management interface driver • Rack infrastruc ture interface service For Micr[...]
-
Page 37
Configura tion and utilities 37 To connect to the server blade using iLO 2, install the server blade in an enclosure. enclosure assigns an IP address to enable iLO 2 connectivity to the server blade. The c-Class tab enables you to control specific setti ngs for the HP BladeSystem. iLO 2 also provides web- based status for the HP B ladeSystem config[...]
-
Page 38
Configura tion and utilities 38 o TCP/IP networking and an IP address compatible with one of the following : the iLO 2 Diagnostic Port IP address or an assigned DHCP or static IP address o CD-ROM drive, CD/ DVD-ROM dr ive, and/or diskette drive o Any of the following Java™ Runtime Environment v ersions: 1.3.1_02 1.3.1_07 1.3.1_08 1.4.1 for Windo [...]
-
Page 39
Configura tion and utilities 39 Deployment methods Four primary deployment methods are supported: IMPORTA NT: To deploy a server blade without the RD P, create a bootable diskette or image of a bootable diskette. • PXE deployment (on page 39 ) • CD-ROM deployment (on page 39 ) • Diskette image deployment (on page 40 ) • SAN configuration (o[...]
-
Page 40
Configura tion and utilities 40 Two methods are available for CD-ROM deployment: • iLO virtual CD -ROM • USB CD-ROM iLO virtual CD-ROM To deploy with a boot CD: 1. Do one of the foll owing: o Insert the boot CD into the client PC that is using the iLO 2 Remote Console. o Use iLO 2 to create an image file of the boot CD. o Copy the image of the [...]
-
Page 41
Configura tion and utilities 41 This method implies a deployment infrastructure th at may include an administrator workstation, PXE server, M icrosoft® Windows® file share, or a L inux fi le share. For more information , refer to "Deployment infrastructure (on page 37 )." Before beginning the deployment process, connect the server blade[...]
-
Page 42
Configura tion and utilities 42 • The FCA option is installed correctly in the server blade. Refer to the doc umentation that ships with the FCA option. • An FC-compatible interconnect is installed in the enclos ure. Refer to the documentation that ships with the interconnect option. • The server blade enclosure management module firm ware is[...]
-
Page 43
Configura tion and utilities 43 configuration process. This automate d serv er configuration process cuts time from ea ch server deployed, making it possible to scale server deploymen ts to high volumes in a rapid manner. For more information, and t o download the SmartSta rt Scripting Toolkit, refer to the HP website ( http://www.h p.com/servers/s[...]
-
Page 44
Configura tion and utilities 44 NOTE: If the boot drive is not empty or has been written to in the past, ORCA does not automatically configure the array. You must run ORCA t o configure the array settings. Drives installed Drives used RAID level 1 1 RAID 0 2 2 RAID 1 3, 4, 5, or 6 3, 4, 5, or 6 RAID 5 More than 6 0 None To change any ORCA default s[...]
-
Page 45
Configura tion and utilities 45 DIMM. DIMMs that are likely to receive a fat al/uncorrectable memory e rror are removed from operation automatically, result ing in less system downtime. See the server-speci fic user guide for DIMM population requirements. • Mirrored Memory Mode—Provides protection against uncorrectable memory errors that would [...]
-
Page 46
Configura tion and utilities 46 Installing the E mbedded SATA RAID driv er with a USB di skette drive 1. Boot the server blade, and then press F10 to enter the ROM-Ba sed Setup Utility (RBSU). 2. Enable the Embedded SATA RAID option under the Advanced Options section. 3. Exit RBSU. The server blade will reboot. 4. When prompted, press F8 to enter t[...]
-
Page 47
Configura tion and utilities 47 Instal ling an o perati ng system (Embe dded SATA R AID) Embedded SATA RAID is only suppo rted with certain operating systems. For more information about supported operating system s, see the HP website ( http://www.hp. com/go/supportos ). To install an OS, download the HP embedded SATA RAID Controller driver and cre[...]
-
Page 48
Configura tion and utilities 48 6. Select Product ID . 7. Enter the product ID and press the Enter ke y. 8. Press the Esc k ey to close the menu. 9. Press the Esc k ey to exit RBSU. 10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot. Management tools Automatic Server Recovery ASR is a feature that causes the system [...]
-
Page 49
Configura tion and utilities 49 Erase Utility CAUTION: Perform a backup before running the System Erase Utility. The utility sets the system to its original factory state, deletes the current hardware configuration information, including array setup and disk partitioning, and erases all connected hard driv es co mpletely. Refer to the instructions [...]
-
Page 50
Configura tion and utilities 50 The Virtual Machine Management Pack provides the following functionality: • Central management and control of VMware® and Micr osoft® virtual machines with phys ical host to virtual machine association • Easy identification of VMs or host servers reachi ng high CPU, memory, or disk utilization levels • Highly[...]
-
Page 51
Configura tion and utilities 51 HP ProLiant Ess entials Vulnerab ility and Patch Management Pack The HP ProLiant Essentials Vulnerability and Patch Ma nagement Pack software ex tends the functionality of HP Systems Insight Man ager (HP SIM) to provide vulnerability and patch management for target systems. The Vulnerability and Patch Management Pack[...]
-
Page 52
Configura tion and utilities 52 For more information about Insight Contro l Environment suites, see the HP website ( http://www. hp.com/go/i ce ). HP Insight Control Linux Editio n HP Insight Control Linux Edition is an all-in-one soft ware package that provides Linux-based management and deployment capabilities for the HP BladeSystem and its c-Cla[...]
-
Page 53
Configura tion and utilities 53 Diagnostic tools HP Insight Diagnostics HP Insight Diagnostics is a proactive server blade ma nagement tool, available in both offline and online versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who v erify server blade installations, troubleshoot pr oblems, and p erfor[...]
-
Page 54
Configura tion and utilities 54 • From within HP Insight Diagnostics (on page 53 ) For more information, refer t o th e Management CD in the HP ProL iant Essentials Foundation Pack. Remote support and analysis tools HP Instant Support Enterprise Edition ISEE is a proactive remote monitoring and diagnostic t ool to help ma nage your systems and de[...]
-
Page 55
Configura tion and utilities 55 NOTE: If you are installing drivers from the S martStart CD or the Software Maintenance C D, refer to the SmartStart website ( http://www.hp.c om/servers/smartstart ) to be sure that you are using the latest version of SmartStart. For mo re information, refer to the documentati on provided with the SmartStart CD. If [...]
-
Page 56
Configura tion and utilities 56 IMPORTA NT: This utility supports operating systems that may not be supported by the server. For operating systems supp orted by the server, see the HP website ( http://www.hp.com/support ). • Integrates with other software maintenanc e, deployment, and operating system tools • Automatically checks for hardware, [...]
-
Page 57
Troubleshooting 57 Tr o u b l e s h o o t i n g Troubleshooting resources The HP ProLiant Serve rs Troubleshooting Guide provides procedures for resolving c ommon problems and comprehensive courses of action for fault isolation and i dentification, error message interpretation, issue resolution, and software maintenance on ProLiant se rv ers and se[...]
-
Page 58
Troubleshooting 58 Important safety information Familiarize yourself with the safety information in th e fol lowing sections befo re troubleshooting the server. Important sa fety informatio n Before servicing this product, read the Important Safety Information document provided with the server. Symbol s on equi pment The following symbols may be pl[...]
-
Page 59
Troubleshooting 59 WARNING: Only authorized technicians traine d by HP should attempt to repair this equipment. All troubleshooting and repair procedures are detailed to allow only subassembly/module-level repair. Because of th e complexity of the individual boards and subassemblies, no one should attempt to make repairs at the component level or t[...]
-
Page 60
Troubleshooting 60 6. Collect all tools and utilities, such as a Torx sc rewdriver, loopback adapters, ESD wrist strap, and software utilities, necessary to tro ubleshoot the problem. o You must have the appropriate Health Drivers and Management Agents installed on the server. NOTE: To verify the server configuration, co nnect to the S ystem Manage[...]
-
Page 61
Troubleshooting 61 The available flowcharts include: • Start diagnosis flowchart (on page 61 ) • General diagnosis flowchart (on page 62 ) • Server blade power-on problems flowchart (on page 64 ) • POST problems flowchart (on page 66 ) • OS boot problems flowchart (on page 68 ) • Server fault indications flowchart (on page 70 ) Start di[...]
-
Page 62
Troubleshooting 62 General diagnosis flowchart The General diagnosis flowchart provides a generic appr oach to troubleshooting. If you are unsure o f the problem, or if the other flow charts do not fix the problem, use the following f lowchart. Item See 1 "Symptom in formation (on page 59 )" 2 "Loose connecti ons (on page 60 )" [...]
-
Page 63
Troubleshooting 63 Item See 4 The most recen t version of a particular server or option firmware is available on the f ollowing websites: • HP Support website ( http://www.hp.com /support ) • HP ROM-BIO S/Firmware Updates website ( http://h18023.www1.hp.com/ support/f iles/server/us/romflash.ht ml ) 5 "General memory problems are occurring[...]
-
Page 64
Troubleshooting 64 Server blade power-on problems flowchart Symptoms: • The server does not power o n. • The system power LED is off or amber.[...]
-
Page 65
Troubleshooting 65 • The health LED is red or amber. NOTE: For the location of s erver LEDs and inform ation on their statuses, refer to the server documentation. Possible causes: • Improperly seated or faulty power supply • Loose or faulty power cord • Power source problem • Power on circuit problem • Improperly seated component or int[...]
-
Page 66
Troubleshooting 66 POST problems flowchart Symptoms: • Server does not complete POST NOTE: The server has completed POST when the sy stem attempts to access the boot device. • Server completes POST with errors Possible problems: • Improperly seated or faulty internal component • Faulty KVM device • Faulty video device[...]
-
Page 67
Troubleshooting 67 Item Refe r to 1 Server blade power-on pro blems flowc hart (on page 64 ) 2 "POST error messag es and beep codes (on pag e 72 )" 3 "Video problems" in the HP ProLiant Serve rs Troubleshooting Guide located on the Documen tation CD or on the HP website ( http://www.hp.com/support ) 4 "Symptom in formation [...]
-
Page 68
Troubleshooting 68 OS boot problems flowchart There are two ways to use SmartStart when di agnosing OS boot pro blems on a server blade: • Use iLO to attach virtual devices remotely to mount the S martStart CD on the server blade. • Use an HP c-Class Blade SUV Cable and drive to connect to the serv er blade, and then restart the server blade. S[...]
-
Page 69
Troubleshooting 69 • Server does not boot SmartStart Possible causes: • Corrupted OS • Hard drive subsystem problem • Incorrect boot order s etting in RBSU Item See 1 HP ROM-Based Setu p Utility U ser Guide ( http://www.hp.com/servers/smartstart ) 2 "POST problems f lowchart (on page 66 )" 3 • "Hard drive problems " in[...]
-
Page 70
Troubleshooting 70 * See the server blade OS boot problems flowchart (on page 68 ) Server fault indications flowcha rt Symptoms: • Server boots, but a fault event is report ed by Insight Management Agents (on page 49 ) • Server boots, but the internal health LED, extern al health LED, or component health LE D is red or amber[...]
-
Page 71
Troubleshooting 71 NOTE: For the location of s erver LEDs and inform ation on their statuses, refer to the server documentation. Possible causes: • Improperly seated or faulty internal or external component • Unsupported component installed • Redundancy failure • System overtemperatu re condition Item See 1 "Managemen t agents (on page[...]
-
Page 72
Troubleshooting 72 POST error messages an d beep codes For a complete listing of error messages, refer to the "POST error message s" in the HP ProLi ant Servers Troubleshooting Guide locat ed on the Documentation CD or on the HP website ( http://www.hp.com/support ). WARNING: To avoid potential problems, ALWAYS read the warnings and cauti[...]
-
Page 73
Battery replacement 73 Bat ter y r e placement If the server blade no longer automatically display s the correct date and time, you may need to replace the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years. WARNING: The computer contains an internal lithium m anganese dioxide, a vanadium pentoxide, [...]
-
Page 74
Regulatory compliance notices 74 R e gulator y compliance noti ces Regulatory compliance identification numbers For the purpose of regulatory complian ce certifications and identification, this prod uct has been assigned a unique regulatory model number. The regulatory mo del number can be found on the product nameplate label, along with all requir[...]
-
Page 75
Regulatory compliance notices 75 energy and, if not installed and used in accordan ce with the instructions, may caus e harmful interference to radio communications . However, there is no guaran tee that interference will not occur in a particular installation. If this equipment does cause harmful interf erence to radio or televi sion reception, wh[...]
-
Page 76
Regulatory compliance notices 76 Canadian notice (Avis Canadien) Class A equipment This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Class B equipment This Class B [...]
-
Page 77
Regulatory compliance notices 77 This symbol on the product or on its packaging in dicates that this product m ust not be disposed of with your other hous ehold waste. Inste ad, it is your respons ibility to dispose of your was te equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equi[...]
-
Page 78
Regulatory compliance notices 78 Korean notice Class A equipment Class B equipment Laser compliance This product may be provided with an optical storage d evice (that is, CD or DVD drive) and/or fiber optic transceiver. Each of these devices contains a laser that is classified as a Class 1 Laser Product in accordance with US FDA regulatio ns and th[...]
-
Page 79
Regulatory compliance notices 79 WARNING: The computer contains an internal lithium m anganese dioxide, a vanadium pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not properly handled. To reduce the risk of personal inju ry: • Do not attempt to recharge the battery. • Do not expose the battery to t[...]
-
Page 80
Electrostatic discharge 80 Elec tr os tati c dis c har ge Preventing electrostatic discharge To prevent damaging the system, be aware of the pr ecautions you need to follow when setting up the system or handling parts. A discharge of static elec tricity from a finger or other cond uctor may damage system boards or other static-sensitive devices. Th[...]
-
Page 81
Specifications 81 Sp e c ific a t io n s Environmental specifications Specification Value Tempera ture range* Operat ing 10 ° C to 35 ° C (50 ° F to 95 ° F) Shipping -40 ° C to 60 ° C (-40 ° F to 140 ° F) Storage -20°C to 60°C (- 4°F to 140°F) Maximu m wet bulb temperature 30 ° C (86 ° F) Relative hu midity (noncond ensing )** Operati[...]
-
Page 82
Technica l suppor t 8 2 T ec hni cal su ppor t Before you contact HP Be sure to have the following info rmation available before y ou call HP: • Technical support registra tion number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error messages • Add-on boards or har[...]
-
Page 83
Technica l suppor t 8 3 • Mandatory —Parts for which customer self repair is ma ndatory. If you request HP to replace these parts, you will be charged for the travel and labor costs of this service. • Optional —Parts for which customer self repair is option al. These parts are also designed for customer self repair. If, how ever, you requir[...]
-
Page 84
Technica l suppor t 8 4 l'ensemble des frais d'expédition et de retour, et détermine la société de courses ou le transporteur à utiliser. Pour plus d'informations sur le prog ramme CSR de HP, contactez votre Ma inteneur Agrée local. Pour plus d'informations sur ce programme en Amériq ue du Nord, consultez le site Web HP ([...]
-
Page 85
Technica l suppor t 8 5 lassen möchten, können bei diesem Service je nach den für Ihr Produkt vorgesehenen Garantiebedingungen zusätzliche Kosten anfallen. HINWEIS : Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des Kunden zu erfüllen, muss das Teil von einem HP Servic epartner ersetzt werden. Im illustri[...]
-
Page 86
Technica l suppor t 8 6 de envío. Si no enviara el componente defectuoso requ erido, HP podrá cobrarle por el de sustituci ón. En el caso de todas sustituciones que lle v e a cabo el cliente, H P se hará cargo de todos los gastos de envío y devolución de componente s y escogerá la empresa de transporte que se utilice para dicho servicio. Par[...]
-
Page 87
Technica l suppor t 8 7 • Obrigatória – Peças cujo re paro feito pelo cliente é obri gatório. Se desejar que a HP substitua essas peças, serão cobradas as de spesas de transporte e mão-de-obra do serviço. • Opcional – Peças cujo reparo feito pe lo cliente é opcional. Essas peças também são projetadas para o reparo feito pelo cl[...]
-
Page 88
Technica l suppor t 8 8[...]
-
Page 89
Technica l suppor t 8 9[...]
-
Page 90
Acronyms an d abbreviations 90 A c r on y ms and abbr e v iati ons ABEND abnormal end AMP Advanced Memory Protectio n ASR Automatic Server Recovery CSR Customer Self Repair DHCP Dynamic Host Configuration Protocol DRAM dynamic random access memory HP SIM HP Systems Insight Man ager iLO 2 Integrated Lights-Out 2 IML Integrated Management Log ISEE In[...]
-
Page 91
Acronyms an d abbreviations 91 OSEM Open Services Event Manager P2V physical to virtual PMP Performance Management Pack POST Power-On Self Test PSP ProLiant Support Pack PXE Preboot Execution Enviro nment RBSU ROM-Based S etup Utility RDP Rapid Deployment Pack SMP - P2P Server Migration Pack - Phy sical to ProLiant SUV serial, USB, video TFTP Trivi[...]
-
Page 92
Acronyms an d abbreviations 92 V2V virtual to virtual VCA Version Control Agent VM Virtual Machine WEBES Web-Based Enterprise Service WfM Wired for Management[...]
-
Page 93
Index 93 A access panel 11 additional information 57 Advanced ECC m emory 29, 44 Advanced ECC su pport 29 ASR (Automatic Server Recovery) 48 authorized reseller 82 auto-configu ration process 43 Automatic Server Recovery (ASR) 48 Autorun menu 42 B Basic Input/Ou tput System (BIOS) 44, 48 batteries, replacing 73, 78 battery 8, 73, 78 battery replace[...]
-
Page 94
Index 94 European Union notice 76 external cables 33 F FCC (Federal Comm unications Commis sion) notice 74, 75 FCC rating label 74 features 6 Federal Communications C ommission (FCC) notice 74, 75 firmware upgrade utility, troubleshooting 57 flowcharts 60, 61, 62, 64, 66, 68, 70 front panel buttons 7 front panel components 6 front panel LEDs 7 fron[...]
-
Page 95
Index 95 laser devices 78 LED, health 7 LED, power button 7 LED, system power 7 LEDs, hard driv e 7 LEDs , NIC 7 LEDs, troublesho oting 57 LEDs, unit identificati on (UID) 7 Lights-Out network-ba sed deployment 36, 37, 39 local KVM, accessing a server blade with 34 local media devices, accessing 34 loose connections 60 M maintenance guidelines 54 M[...]
-
Page 96
Index 96 Server Migration Pack 49, 50 service notifications 60 setting up a network 37 Setup 12 Smart Update Manager 55 SmartStart autorun menu 42 SmartStart Scripting Toolkit 42 SmartStart, ove rview 42 software 36 specifications 81 specifications, environmental 81 specifications, server blade 81 start diagnosis flowchart 61 static electricity 80 [...]