JVC TD-UXG6 manual

COMP ACT DISC/TUNER CASSETTE DECK For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LV T 0376-001B [B] UX-G6R Consists of AX-UXG6, XT -UXG6R, TD-UXG6, and SP-UXG6. MICRO COMPONENT SYSTEM INSTRUCTIONS MICR[...]

W arnings, Cautions and Others Caution –– switch! Disconnect the mains plug to shut the power off completely (the STANDBY/ON lamp goes off). The switch in any position does not disconnect the mains line. • When the unit is on standby, the STANDBY/ON lamp lights red. • When the unit is turned on, the STANDBY/ON lamp lights green. The power c[...]

IMPORT ANT FOR LASER PRODUCTS 2 W ARNING LABEL, PLACED INSIDE THE UNIT REPRODUCTION OF LABELS 1 CLASSIFICA TION LABEL, PLACED ON EXTERIOR SURF ACE CLASS 1 LASER PRODUCT 1. CLASS 1 LASER PRODUCT 2. DANGER : Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION : Do not open the top cover . Th[...]

1 Power sources • When unplugging from the wall outlet, always pull the plug, not the AC power cord. DO NOT handle the AC power cord with wet hands. Moisture condensation Moisture may condense on the lens inside the units in the following cases: • After starting heating in the room • In a damp room • If the units are brought directly from a[...]

2 Contents Introduction .......................................................... 1 About This Manual ............................................................... 1 Precautions ........................................................................... 1 Contents ................................................................. 2 Location of th[...]

3 Location of the Buttons and Controls XT -UXG6R Compact Disc /T uner AX-UXG6 Stereo Amplifier TD-UXG6 Cassette Deck Display window Front Panels REC BASS 1 2 34 5 Become familiar with the buttons and controls on the units. q w e MICRO COMPONENT SYSTEM UX-G6R MOS - FET OPEN/CLOSE AUX VOLUME MULTI FM/AM STANDBY/ON JOG 1 4 5 6 7 2 3 8 9 p r t y u PHON[...]

4 Front Panels AX-UXG6 Stereo Amplifier 1 button and ST ANDBY/ON lamp (11)* 2 MUL TI JOG dial 3 FM/AM button (14)* 4 OPEN/CLOSE button (13)* 5 Display window 6 VOLUME dial (1 1) 7 AUX button (13, 28)* XT -UXG6R Compact Disc / T uner 8 CD tray 9 Remote sensor (5) p PHONES jack (12) q 0 (open/close) button for CD tray (20)* w 6 (play/pause) button (2[...]

5 VOLUME MD ENTER PTY/EON AUTO PRESET PLAY MODE FM MODE CANCEL DISPLAY /CHARA. BASS SLEEP PANEL OPEN/CLOSE REMOTE CONTROL RM-SUXG6R > < TAPE FM/AM DOWN SET UP AUX 2 4 6 ; 1 a s d f g h j k l / z  3  5  8 p 7  9  w q  r e  t  y i u  o  TITTLE/EDIT REPEAT TREBLE DIMMER CLOCK/TIMER CD  ACTIVE BASS EX.  Remote [...]

6 Unpacking After unpacking, check to be sure that you have all the following items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) • Speaker cords (2) • External wire (1) If any is missing, consult your dealer immediately . Putting[...]

7 Connecting Antennas Supplied FM antenna 1 Attach the FM antenna to the FM 75 Ω CO AXIAL terminal on the rear panel of XT -UXG6R. 2 Extend the FM antenna. 3 Fasten it up in the position which gi ves you the best reception. About the supplied FM antenna The FM antenna supplied with this unit can only be used as temporary measure. If reception is [...]

8 Connecting Speakers Y ou can connect the speakers using the speaker cords. 1 Open the speaker terminal. 2 Insert the end of the speaker cord to the terminal. Match the polarity of the speaker terminals: Red (+) to red (+) and black (–) to black (–). 3 Close the speaker terminal on the r ear of the unit. When connecting speaker cords • Make [...]

9 Connecting Other Equipments Y ou can connect the following equipments to the system: • Audio equipment — used only as an analog playback device. • Audio equipment with an optical digital input terminal — used as a digital recording device. When you connect and use these equipments, refer also to the manuals supplied with them. T o connect[...]

10 Basic Settings Before operating the system any further , set the clock built in this system first, then some other basic settings. Setting the Clock Y ou can set the clock using the remote control whether the system is turned on or turned off (i.e. standby mode). 1 Press CLOCK/TIMER b utton on the remote control. The hour digit in the display wi[...]

11 Common Operations Here are basic and common things that apply to all the operations of UX-G6R system. T urning On the Power and Selecting the Sources When you press a play button for example, like FM/AM, CD 6 (play/pause), or T APE 23 (playback), the system automatically turns on and ST ANDBY/ON lamp lights green. One T ouch Play If any CD or a [...]

12 • When using the remote control, press VOLUME + button to increase the volume level or press VOLUME – button to decrease it. The volume level (from 0 to 50) appears in the display window as follows: For pri vate listening Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume leve[...]

13 Operating the Sliding Panel Y ou can use the sliding panel to enable advanced operations features provided for UX-G6R micro component system. • Press OPEN/CLOSE button on the front panel (or P ANEL OPEN/CLOSE button on the remote control). The sliding panel opens to uncover the inner buttons behind the panel for further operations. • Press O[...]

14 Y ou can tune in FM and AM (MW/L W) stations manually , automatically , and use the preset station feature. T uning in a Station 1 Press FM/AM b utton. The system automatically turns on and tunes in the last tuned station (either FM or AM—MW/L W). The following information appears in the display window . • Each time you press the button, the[...]

15 Presetting Stations Y ou can preset up to 30 FM and 15 AM (MW/L W) stations into memory by following two methods: manual/automatic presettings. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again. T o preset stations manually — Manual Preset 1 Pr ess 4 / ¢ (lower/higher[...]

16 RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast such as sports and music. When tuned in an FM station which provides the RDS service, RDS indicator lights in the display window . Y ou [...]

17 Switching to a Program T ype T emporarily The EON function allows the system to switch temporarily to a broadcast program of your choice (News, T A, and/or Info) from a different station except when you are listening to a non-RDS stations — some FM stations and AM (MW/ L W) stations. • EON indicator lights while receiving a station with the [...]

18 How the EON function actually works: CASE 1 If ther e is no sta tion br oadcasting the program you ha ve selected The unit continues tuning in the current station. « When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing. « When the pr[...]

19 Finance : Stock market reports, commerce, trading etc. Children : Programs targeted at a young audience. Social : Programs about sociology , history , geography , psychology and society . Religion : Religious programs. Phone In : Involving members of the public expressing their views either by phone or at a public forum. T rave l : T ravel infor[...]

20 Y ou can use Normal, Program, Random, or Repeat Play . • When using the buttons behind the sliding panel, press OPEN/CLOSE button on the AX-UXG6 to open the sliding panel first. • When using the remote control, press CD 6 (play/ pause) button first and 7 (stop) button successively . Playing Back the Entire Disc — Normal Play 1 Pr ess 0 (op[...]

21 T o go to another track Before or during playback, press 4 / ¢ button repeatedly: Press ¢ button: Skips to the beginning of the next and succeeding tracks. Press 4 button: Goes back to the beginning of the current and previous tracks. Rotating MUL TI JOG dial clockwise also changes the tracks forwards quickly , while rotating it counterclockwi[...]

22 4 Pr ess SET button to program the track number . T rack number Program number Here the track number 2 on the CD is stored into a program number 1, and shortly after that the total playback time of programed tracks appears in the display window as follows: T otal playback time 5 Repeat steps 3 to 4 to pro g ram other tr acks you want up to 32 tr[...]

23 Repeating T racks — Repeat Play Y ou can have the entire disc, the programed tracks, or the individual track repeat as many times as you like. 1 Place a CD. If the current playing source is not the CD, press 6 (play/pause) button on the CD unit, then 7 (stop) button before going to the next step. 2 Press REPEA T button on the remote contr ol r[...]

24 • DO NOT try to open or close the tape tray by hands as it will be damaged. • DO NOT place any foreign matters. • DO NOT prevent the tray from opening and closing, because it may results damages on the unit. 3 Press 0 (open/close) button ag ain to close the tray . 4 Press ` (playback) b utton on the unit or T APE ` (playback) b utton on th[...]

25 T o skip for ward to the next music Press the button same as the tape direction indicator as follows: 3 ] Press ¢ button. 2 ] Press 4 button. During Music Scan progressed, the tape direction indicator starts blinking rhythmically . Repeating Music Scan feature made easy searching a desired program on a tape one after another . The beginning of [...]

26 T wo types of cassette tapes can be recorded onto, including normal (T ype I), and High position (T ype II) tapes. These types are identified automatically by the cassette deck unit and the recording level is also corrected automatically . Neither volume level nor sound effects during playback does affect to the recording. IMPOR T ANT : • It s[...]

27 • Dolby B NR Press DOLBY B NR button before recording to reduce frequency response noise. When the tape is played back later , also press the button with its lamp lit. • BEA T CUT on AM (MW/L W) When recording AM broadcast, beats noise may be heard. Set the BEA T CUT selector to either position 1 or 2 on the rear panel of the cassette deck u[...]

28 Synchronized Recording from a CD CD application on UX-G6R system can be recorded with a simple, one-touch operation. 1 Place a recordable tape and a sour ce CD into each tray . • T o record using Dolby B NR, press the DOLBY B NR button before recording so that its lamp near the button lights orange. 2 Press 6 (play/pause) b utton on the CD uni[...]

29 • Each time you press the button, the timer mode changes as follows: 2 Rotate MUL TI JOG dial ( < / > button on the r emote control also a vailable) to select the hour of the timer - on time, then press SET b utton. 3 Rotate MUL TI JOG dial ( < / > button on the r emote control also a vailable) to select the minute of the timer -on[...]

30 2 Press SET b utton to call the previous settings f or next timer recording . The REC timer indicator lights, and the setting items appear one after another in the display window . • T o erase the recording timer , press CANCEL button in this step. Using Daily Timer W ith Daily Timer , you can wake up on your favorite music or radio program. ?[...]

31 5 Rotate MUL TI JOG dial ( < / > b utton on the remote control also a vailable) to select the minute of the timer -off time, then press SET b utton. 6 Rotate MUL TI JOG dial ( < / > b utton on the remote contr ol also available) to select the source, then pr ess SET b utton. TUNER FM: T unes into a preset FM station. Go to step 7. TU[...]

32 Timer Priority Since each timer can be set separately , you may wonder what happens if the setting for these timers overlaps. Here are the priorities for each timer . • Recording T imer has priority over Daily Timer and Sleep Timer . If Daily T imer is set to come on while Recording T imer is operating, Daily T imer will not come on at all. If[...]

33 General Notes In general, you will have the best performance by keeping your CDs, cassette tapes and the mechanism clean. • Store CDs and cassette tapes in their cases, and keep them in cabinets or on shelves. • Keep the CD disc tray , and the cassette tapes tray closed when not in use. Handling CDs • Only CDs bearing this mark can be used[...]

34 T ypes of Cassette T apes This cassette deck unit incorporates an Automatic T ape Detection function. This mechanism uses the tape-type detection holes to distinguishes which type of tape was inserted, and sets the bias and equalizer to the optimum settings for that tape automatically . The following types of tapes may be used with this cassette[...]

35 T roubleshooting If you are having a problem with your system, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified person, such as your dealer , for service. Symptom No sound is heard. Poor radio reception. Unable[...]

36 Specifications Stereo Amplifier AX-UXG6 Output power: 48 W (24 W + 24 W) at 6 Ω (Max.) 42 W (21 W + 21 W) at 6 Ω (10% THD) Load impedance: 6 Ω (6 Ω to 16 Ω allo wance) Audio output lev el/Impedance (at 1 kHz): Sub W oofer 800 mV/440 Ω Power requirement: AC 230 V , 50 Hz Power consumption: 63 W (at operation) 2.0 W (on standby: with D[...]

1299JTMMDWJSC EN VICTOR COMP ANY OF JAP AN , LIMITED UX-cover[B] 99.12.21, 13:12 2[...]