Runco SP-60xa manual

O WNER ’ S O PERATING M ANUAL SP-42 / SP-42xa SP-50 / SP-50xa SP-60 / SP-60xa Flat Panel Plasma Display Monitor with[...]

[...]

Runco Cinema Wall SP Series Own er’s Operating Manual iii PRE L IMINAR Y THREE YEAR LIMITED WARRANTY For Plasma Displays Congratulation s on your pu rchase of a Ru nco video product and welcome to the Runco fam ily! We believe Ru nco produ ces “The World’s Fine st Home Thea ter Products.” With proper installa tion, setup and care, you s hou[...]

iv Runc o CinemaWall SP Seri es Owner’s Operating Manual PRE L IMINAR Y MOREOVER, DAMAGE RESULTING DIRECTLY OR INDIRECT LY FROM IMPROPER INSTALLATION OR SETUP IS SPECIFICALLY EXCLUDED FROM COVERAGE UNDER THIS LIMITE D WARRANTY. IT IS IMPERATIVE THAT INSTALLATION AND SETUP WORK BE PERFORMED ONLY BY AN AUTHOR IZED RUNCO DEALER TO PROTECT YOUR RIGHT[...]

Runco CinemaWall SP Series Owner’s Operati ng Manual v PRE L IMINAR Y To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC. Attn: Customer Service Dep artment 2900 Faber St reet Union City , CA 94587 Ph: (5[...]

vi Runc o CinemaWall SP Se ri es Owner’s Operating Manual PRE L IMINAR Y Thank you for your purchase of this quality Runco product! It has been desig ned to provide you with the quality of video that i s expected in a home the ater. This manu al is your guide through the m enus and ope ration. For the best perf ormance, ple ase read it caref ully[...]

Runco CinemaWall SP Series Owner’s Operating M anual vii 1 Table of Content s PRE L IMINAR Y THREE YEAR LIMITED WARRANTY ............... ................ ................ ................ .............. iii S afety Precauti on s .............. ................ ............. ................ ............. ................ ............. .... vi 1. [...]

Table of Contents viii Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 4. Operation .......... ................ ............. ................ ............. ................ ................ ............. 27 Turning on t he Power .......... ............. ................ ................ ............. ................ .........[...]

Runco CinemaWall SP Series Owner’s Operati ng Manual ix 1 Li s t of Figure s PRE L IMINAR Y 2-1. CinemaWall Co ntrols and Ind icators .............. ................ ............. ................ ................ .. 5 2-2. SP-42 Conne ctor Panel .... ................ ............. ................ ................ ............. ................ [...]

List of Figures x Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CinemaWall SP Series Owner’s Operati ng Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and op erate the Ru nco CinemaWall Flat-Panel Plasma Displa y Monitor (Mod el SP-42, SP-42xa, SP-50, SP-50xa, SP-60 o r SP-60xa). Throughout th is manual, all six m odels are referr ed to colle ctive[...]

Introduc tion 2 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y G raphic Convention s : These symbols appear in numerous p laces throug hout the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic inf[...]

Introd uction Runco CinemaWall SP Series Owner’s Operati ng Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The CinemaWall F lat-Panel Plasma Display Mo nitor combines hig h-resolution quality an d affordability into one pack age. It has all of the features th at one has come to expect from a Runco product , including high -quality[...]

Introduc tion 4 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Parts List Your CinemaWall is shipped with the following it ems. If any items are missing or damag ed, please contact y our Runco de aler or Runco C ustomer Service a t (800) 23-RUNCO . • CinemaWall F lat-Panel Plasma Display Mo nitor • AC Power Cord • Remote[...]

Runco CinemaWall SP Series Owner’s Operati ng Manual 5 PRE L IMINAR Y 2.1 CinemaWall at a Glance Controls and Indicators Figure 2-1 sho ws the location s of the Cinema Wall controls, indica tors and con nectors. Figure 2-1. CinemaWall Control s and In dicator s 2. Control s and Function s Main unit Operation panel on the under s ide of the main u[...]

Controls and Functions 6 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 1. DI S PLA Y S TA N D Optional accessory f or tabletop instal lations. 2. REMOTE CONTROL S EN S OR Receives the sign als from the r emote cont rol. 3. AMBIENT LI G HT S EN S OR ( S P-42 and S P-50 only) This sensor meas ures the light level in the viewing[...]

Controls and Functi ons Runco CinemaWall SP Series Owner’s Operati ng Manual 7 PRE L IMINAR Y Connectors Figure 2-2, Figure 2-3 an d Figure 2-4 show the rear-p anel connect or locations on the SP-42, SP-50 and SP-60 respectively. Figure 2-2. S P-42 Connector Panel COMBINATION IN OUT RS-232C AUDIO AUDIO INPUT1 AUDIO OUTPUT INPUT2 ANALOG RGB OUT (D[...]

Controls and Functions 8 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Figure 2-3. S P-50 Connec tor Panel Figure 2-4. S P-60 Connec tor Panel COMBINATION IN OUT R S -232C AUDIO AUDIO INPUT1 AUDIO OUTPUT INPUT2 ANALOG RGB OUT (D- S ub) ANALOG RGB IN (D- S ub) INPUT1 DIGITAL RGB (DVI-D) INPUT2 R S -232 DVI VIDEO COMPONENT 14 1[...]

Controls and Functi ons Runco CinemaWall SP Series Owner’s Operati ng Manual 9 PRE L IMINAR Y 1. COMBINA TION IN/OUT Used to control multiple Cinema Wall monitors collectively. Use a 6-pin, min i-DIN cable (all pins wired st raight-through ). 2. Not used . 3. AUDIO (OUTPUT) (3.5-mm s tereo mini jack) Used to outp ut the audio o f the selected sou[...]

Controls and Functions 10 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 16. AC POWER INPUT Connect the CinemaWall to power here, using th e included powe r cord. 17. MAIN POWER S WITCH Connects or disc onnects th e CinemaWall fr om the AC po wer source. 2.2 CinemaWall Remote Control Figure 2-5 shows the Cine maWall remote con[...]

Controls and Functi ons Runco CinemaWall SP Series Owner’s Operating M anual 11 PRE L IMINAR Y 3. MENU Press this button t o show or hide the OSD cont rols. 4. Directional Button s ( / / / ) Use these button s to navigate the OS D menus and adjust various settings. 5. S ET BUTTON Press this butto n to adjust or enter var ious settings on the unit[...]

Controls and Functions 12 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CinemaWall SP Series Owner’s Operating M anual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Remove the battery cover from the back of the remote co ntrol. 2. Insert the b atteries include d with the remote co ntrol. Ensu re that the polarities correc tly match the and markings inside the battery compa[...]

Installation 14 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote control or expose it to moisture or hig h temperatu re. • The remote contr ol may malfunctio n under a fluoresc ent lamp. If that occur s, move the plasma display away f rom the fluoresc ent lamp. • Make sure th at there is nothing ob[...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 15 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick over view of the Cine maWall in stalla tion pr ocess. The sections following this one pr ovid e detailed ins tructions. Installation shou ld be performed by a quali fied custom video installation specialist. Table 3-1. In s [...]

Installation 16 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper installation of your Cine maWall will ensure the highe st possible picture quality. Whether you are installing the CinemaWall temporarily or perm anently, you should take the following int o account to ensure that it performs [...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 17 PRE L IMINAR Y • As it lies flat with the scree n face down. Place the pr otective sheet, which was wr apped aro und the plasma monitor when it was packaged, b etween the screen and your work surface to avoid scratching or other wise damaging the screen su rface. Ambient Light[...]

Installation 18 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Other Considerations Other consid erations and ti ps that can help improve your installat ion, avoid damage and prolong opera ting life: • Keep the ambi ent temperature constant and be low 35°C (95°F). Keep the display away from heating a nd/or air conditioni n[...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 19 PRE L IMINAR Y 3.4 Connections to the CinemaWall Proceed as follows to connect the Cinem aWall to your video sou rces, external contr oller(s) – if present – and AC powe r. When connect ing your equipm ent: • Turn off all equipmen t before maki ng any connect ions. • Use[...]

Installation 20 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y ANALO G R G B OUT (INPUT 1) Connection: The CinemaWall has an RGB output for looping th e signal received at INPUT 1 out to a second RG B display device. C onnect the second display d evice to the ANALOG RGB OUT connec tor as shown in Figure 3-4 . Figure 3-4. ANALO[...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 21 PRE L IMINAR Y Compo s ite/ S -Video (INPUT 3) Connection s : The CinemaWall has S-Video and Composite video i nputs for connecting a VCR, camc order, lase r disc player, DVD player or other stand ard-definition (4 80i) source. C onnect such dev ices to INPUT 3 a s shown in Figu[...]

Installation 22 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Component Video (INPUT 4) Connection: If you have a DVD player or DT V decoder with a compon ent (YPbPr) outpu t, connect it to INPUT 4 as sh own in Figure 3-7 . Figure 3-7. Component Vi deo (INPUT 4) Connection DVI-D Video (INP UT 5) Connection : The CinemaWall ha[...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 23 PRE L IMINAR Y Audio Connections Attaching the Ferrite Core s to th e Audio Cable s : Three (3), small fe rrite cores are provided w ith the Cin emaWall. Before connecting yo ur audio eq uipment, atta ch a ferrite core to eac h audio cable as shown in Figure 3-9 . Doing so will [...]

Installation 24 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Audio Output: The CinemaWall has a stereo audio output for co nnection to a n external A/V receiver or po wered speak ers. The aud io signal c orresponding t o the select ed video input is output to both the sp eakers and t his audio ou tput. Use a stereo mi niplug[...]

Installation Runco CinemaWall SP Series Owner’s Operating M anual 25 PRE L IMINAR Y RS-232 Controller Connection Use a 9-pin, stra ight-through RS-232 cable to connect a PC or home t heater control/automation system (if prese nt) to the RS-232 port (locat ed next to INPUT 5) on the CinemaWall; see Figure 3-13 . For more in formation ab out using [...]

Installation 26 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CinemaWall SP Series Owner’s Operating M anual 27 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your source co mponents. 2. Attach th e two includ ed ferrite core s to each end of the AC po wer cable as shown in Figure 4-1 . Doi ng so will reduce radi o frequency interference (R FI) emissions to a level that conform s to FCC reg ulatio[...]

Operation 28 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 4.3 Selecting an Input Source To select an inpu t source, press a numbered butto n on the remo te control c orresponding to that inpu t. 4.4 Viewing Inpu t Signal Information Press INFO on the rem ote contro l to have the CinemaWall display t he currently-s elected in[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 29 PRE L IMINAR Y 5. Click the Advanced button and click the Monitor tab on the dialog box. Set the vertical frequenc y to 60Hz and click OK . R G B S etup (Input 1 only): After adjusting the c omputer’s dis play properties, p ress the R G B S ETUP button on t he remote c ontrol to [...]

Operation 30 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio De s cription 16:9 (Anamorphic) Select 16:9 (Anamorphic) to view 16:9 DVDs and HDTV programs in their na tive aspect ratio. 4:3 images are stretched horizontal ly to fit a 16:9 screen . 4:3 (Standard) Standard 4:3 sc[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 31 PRE L IMINAR Y Virtual Cinema A 2.35:1 image is stretc hed anamorphically in both directions to fill a 16:9 display area. The 2.35:1 image is cropped on all sides. 14:9 14:9 scales the input signa l to fit in the center of the 16:9 screen. PIX BY PIX Select PIX BY PIX to display a [...]

Operation 32 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 4.7 Using the On-Screen Menus To use the o n-screen menu s: 1. Press MENU on eit her the remote control or the CinemaWall cont rol panel (see Figure 2-1 ) to display th e Main Menu . Or, usin g a straigh tened pape r clip or similar object , press the Installer Adju s[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 33 PRE L IMINAR Y Figure 4-2. CinemaWall O S D Menu S tructure Option Language English, Français, Español, Deutsc h or Italiano Energy Mode Auto 1, Auto 2, Mute, Auto, Average, Le vel 1, Level 2 or Level 3 Time/Date Present Time DST: On / Of f Day, Hour, Minute Program Timer On / Of[...]

Operation 34 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Main Menu The Main Menu is the starting point for accessing all CinemaWall fun ctions. Some menu options are available only in “Installer Adjust” mode. Pic ture Use the controls in the Pic ture menu to calibrate yo ur CinemaWall f or optimum picture quality. The C[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 35 PRE L IMINAR Y PLUGE patterns va ry but ge nerally consist of some combin ation of black, white and gr ay areas against a blac k background . The example ab ove includes two ver tical bars and four shaded boxes. Select Brightness from the Picture m enu. Using the left- and ri ght-a[...]

Operation 36 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Color S aturation: On your exter nal test patt ern source, se lect a color bar pattern like the one shown in Figure 4-5 . Figure 4-5. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select Color from the Picture menu. While looking at the color ba[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 37 PRE L IMINAR Y S harpne ss : “Sharpness” is the a mount of hig h-frequency de tail in the ima ge. To adjust sharpness, select Sh arpness from the Picture me nu and press S ET . On your external test pattern sour ce, select a p attern like the one shown in Figure 4-6 . Adjust as[...]

Operation 38 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Color Chart (In s taller Adju s t mode): Select Color C hart from th e Picture m enu to adjust the color densit y for each of the six primary color s: red, yellow, green, cya n, blue and magent a. Changing these settings fo r a primary color alters the h ue of that co[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 39 PRE L IMINAR Y V S ize (In s taller Adju s t mode): Use the up- or down-arro w buttons ( , ) to highlight V Size. Then, press S ET and use th e right-arrow b utton ( ) to increase the height; use the left-arrow button ( ) to decrease it. H S ize (In s taller Adju s t mode): Use the[...]

Operation 40 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Use the left- or r ight-arrow bu ttons to sele ct the desir ed amount of noise redu ction, keeping in mind th at higher sett ings (which red uce high freq uencies) may also “so ften” the image. MPE G Filter: Use the MPEG Filter to reduce or e liminate so-called ?[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 41 PRE L IMINAR Y S ub Volume (In s taller Adju s t mode): Sel ect S ub V olume from the Set-Up menu to adjust the aud io input le vel for the current sour ce. Do this for all so urces, as needed to prevent sudd en, drastic ch anges in so und volume wh en switchin g inputs. For exampl[...]

Operation 42 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Time/Date: Select Time/Date from the Option menu t o set the Cinem aWall’s internal clock (time of day a nd day of the week ) and turn the scre en maintena nce feature on o r off. • Pre s ent Time: To set the internal c lock, highl ight Pr e s ent Time and press S[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 43 PRE L IMINAR Y Auto Function: The CinemaWall can automatically switch to Input 1 or Input 4 when an image signal is d etected at that input. To en able this feature, select Auto Function from the Option menu and set it to INPUT 1 or INPUT 4. After Auto Fun ction triggers an in put [...]

Operation 44 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 9. Repeat steps 1 throu gh 8 as desire d to create ad ditional scre en maintenan ce programs. To clear a sc reen maint enance prog ram, move the cursor to the DATE field and press CLEAR on the re mote contro l, using a straig htened pa per clip or sim ilar object. Sel[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 45 PRE L IMINAR Y front-pa nel STANDBY/ ON indicator LED ( Figure 2-1 ). When set to ON, the LED indicates operating sta tus as follows: • Lights green to indicate no rmal operation; • Flashes green (o nce per second ) when the AUT O OFF feature is a ctive; • Lights red to indic[...]

Operation 46 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y CinemaW all inputs using the S WA P button on the remo te control. To enable it, se lect S eamle ss S witch from the Optio n menu and set it to ON. T hen, specify the two inputs you want to asso ciate with this fe at ure in the SELECT 1 and SELECT2 fields. By default,[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 47 PRE L IMINAR Y 4.8 Using Picture-In-Picture (PIP) To use PIP, press t he S PLIT butt on. The PIP sub- window appea rs beside the main image windo w. Press S PLIT again to display the sub-window superimposed on the ma in window. Press S PLIT again to turn PIP off. PIP is curren tly [...]

Operation 48 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Selecting a PIP Source Press the S UB INPUT button to select a PIP si gnal source. Swappi ng the Main and PIP Windows Press the S WAP button to replace the ma in screen with the sub-scr een or vice versa . (This switches th e audio input as well.) Changing the PIP Pos[...]

Operation Runco CinemaWall SP Series Owner’s Operating M anual 49 PRE L IMINAR Y 4.9 Enlarging One Part of the Screen The CinemaWall a llows you t o zoom in on a portion of th e displayed image. To use this feature, pr ess the MA G NIFY button repeatedly to selec t one of fou r zoom levels (Normal Size, 1.5x , 2x or 3x); see Figur e 4-9 . When us[...]

Operation 50 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco CinemaWall SP Series Owner’s Operating M anual 51 PRE L IMINAR Y 5.1 Cleaning Regular cleaning w ill extend the life and pe rformance of t he CinemaWall. Be fore cleaning, be sure to u nplug the p ower cord from the po wer outlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumsta nces use solven ts such as b enz[...]

Maintenance and Troublesh ooting 52 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Picture is oka y, but there i s no sound. • Audio output is muted. • Volume setting is too low. • Source component is connected incorrectly or not at all. • Press the MUTE bu tton on the remote control. • Turn up th e volume. • Che c[...]

Runco CinemaWall SP Series Owner’s Operating M anual 53 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the CinemaWall with a home th eater automation/control system or a PC running terminal emulation soft ware, connect it to your control system or PC as shown in Figure 3-13 . Configure the RS-23 2 controlle r or PC seria[...]

Serial Communications 54 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY Table 6-1 lists the Cine maWall serial comm and set. Except wher e indicated, adjustm ents made using seria l commands a re stored in the same memory as those m ade in Installer Adjust mode. Table 6-1. S erial Command s Command Value Range De s cription A [...]

Serial Communications Runco CinemaWall SP Series Owner’s Operating M anual 55 PRE L IMINAR Y SZMS06 53 5A 4D 53 30 36 – – Sets the aspect ratio to 14:9. SZMS09 53 5A 4D 53 30 39 – – Sets the aspect ratio to UNDERSCAN. SZMS10 53 5A 4D 53 31 30 – – Sets the aspect ratio to VIRTUAL CINEMA. Video PMTS00 50 4D 54 53 30 30 – – Turns vid[...]

Serial Communications 56 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY MSTS02 4D 53 54 53 30 32 – – Sets 2-screen operat ion to Pi nP (lower right) . MSTS03 4D 53 54 53 30 33 – – Sets 2-screen operation t o PinP (upper right) . MSTS04 4D 53 54 53 30 34 – – Sets 2-screen operation t o PinP (upper left). MSTS05 4D 5[...]

Serial Communications Runco CinemaWall SP Series Owner’s Operating M anual 57 PRE L IMINAR Y MSTS11 4D 53 54 53 31 31 – – Sets 2-screen operation to 2 SCREEN (side-by-side, full he ight; main screen on left). MSTS12 4D 53 54 53 31 32 – – Sets 2-screen operation to 2 SCREEN (side-by-side, full he ight; main screen on left). Functional Lock[...]

Serial Communications 58 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY CTPS05 43 54 50 53 30 35 – – Sets COLOR TEMP . to HIGH. CTRS00 43 54 52 53 30 30 – – Sets CHROMA EE to OFF. CTRS01 43 54 52 53 30 31 – – Sets CHROMA EE to ON. DBLS01 44 42 4 C 53 30 31 – – S ets BLACK LEVEL for INPUT 2 to LOW. DBLS02 44 42 [...]

Serial Communications Runco CinemaWall SP Series Owner’s Operating M anual 59 PRE L IMINAR Y SFTS06 53 46 54 53 30 36 – – Sets the SIGN AL FORMAT to Type6. SFTS07 53 46 54 53 30 37 – – Sets the SIGN AL FORMAT to Type7. SFTS08 53 46 54 53 30 38 – – Sets the SIGN AL FORMAT to Type8. SFTS10 53 46 54 53 31 30 – – Sets the SIGN AL FORM[...]

Serial Communications 60 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY TPM 54 50 4D 000 059 Sets the minute of the present time. TPTS00 54 50 54 53 30 30 – – Deactivates progr am timer. TPTS01 54 50 54 53 30 31 – – Acti vates program timer. TPW 54 50 57 001 007 Sets th e day of the week of the present time (001 = Sund[...]

Serial Communications Runco CinemaWall SP Series Owner’s Operating M anual 61 PRE L IMINAR Y GRAS24 47 52 41 53 32 34 – – Sets the GAMMA to 2.4. RHI 52 48 49 000 255 Adjusts red gain (highlight). RLW 52 4C 57 000 255 Adjusts red offset (lowlight). SHP 53 48 50 000 015 Adjusts the SHARPNESS. STD 53 54 44 – – Executes FACTORY and WHITE BAL.[...]

Serial Communications 62 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY CLMS01 43 4C 4D 53 30 31 – – Sets the ISF SETTING to ISF CCC. FCA 46 43 41 – – Sets FAN SPEED to AU TO. FDT 46 44 54 – – Executes FUNCTION RESET. FCM 46 43 4D – – Sets FAN SPEED to MAX. FMKS00 46 4D 4B 53 30 30 – – Sets the TEST PATTERN[...]

Serial Communications Runco CinemaWall SP Series Owner’s Operating M anual 63 PRE L IMINAR Y OSDS00 4F 53 44 53 30 30 – – Sets OSD DISPLAY to OFF. OSDS01 4F 53 44 53 30 31 – – Sets OSD DISPLAY to ON. OSSS01 4F 53 53 53 30 31 – – Sets OSD SIZE to LARGE. OSSS02 4F 53 53 53 30 32 – – Sets OSD SIZE to SMALL. PTRS00 50 54 52 53 30 30 ?[...]

Serial Communications 64 Runco CinemaWall SP Series Owner’s Operating Manual P RELI M INARY Adju s tment Command s Use these commands in place of a numeric value aft er a command that requires one, such as the brightness ( BRT ) command. For example, if the current Brightness setting is 128, you can use either BRTDW0 or BRT118 to reduce the setti[...]

Runco CinemaWall SP Series Owner’s Operating M anual 65 PRE L IMINAR Y 7.1 CinemaWall Specifications Table 7-1 lists the CinemaW all specific ations. 7. S pecification s Table 7-1. CinemaWall S pecification s Native Re s olution: Model S P-42: 1024 x 768 Model S P-50: 1365 x 768 Model S P-60: 1365 x 768 S creen S ize (diagonal): Model S P-42: 42 [...]

Specifications 66 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Dimen s ion s : Model S P-42: See Figure 7-1 Model S P-50: See Figure 7-2 Model S P-60: See Figure 7-3 Weight (with S tand): Model S P-42: 83.0 lbs. (37.65 kg) Model S P-50: 94.2 lbs. (42.73 kg) Model S P-60: 150.5 lbs. (68.27 kg) Limited Warranty: Three (3) year[...]

Specifications Runco CinemaWall SP Series Owner’s Operating M anual 67 PRE L IMINAR Y 7.2 CinemaWall Dimensions Figure 7-1, Fig ure 7-2 an d Figure 7 -3 show the CinemaWall dimen sions (all dimensions are in inches). Figure 7-1. CinemaWall Model S P-42 Dimen s ion s (with Optional Table S tand) 25.365 41.478 1.709 6.901 4.556 0 6.771 12.677 18.58[...]

Specifications 68 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Figure 7-2. CinemaWall Model S P-50 Dimen s ion s (with Optional Table S tand) 29.9 1.2 49.1 4.0 47.9 44.0 6.9 4.6 0 9.0 14.9 20.8 29.9 0 14.8 34.3 49.1[...]

Specifications Runco CinemaWall SP Series Owner’s Operating M anual 69 PRE L IMINAR Y Figure 7-3. CinemaWall Model S P-60 Dimen s ion s (with Optional Table S tand) 1.787 35.596 58.653 17.000 34.440 33.835 0 5.950 11.000 12.530 57.593 0 8.429 28.114 0 12.411 46.246 M8 S CREW[...]

Specifications 70 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y 7.3 Computer/Video Signal Compatibility The CinemaW all can display video signals from a variety of computer sources via INPUT 1 and INPUT 2. Table 7-2 lists the signal typ es that ar e compatible with the Cine maWall. Table 7-2. Computer/Video S ignal Compatibil[...]

Specifications Runco CinemaWall SP Series Owner’s Operating M anual 71 PRE L IMINAR Y 1280x768 56.0 45.1 √ √ 60.0 47.8 √ √ 70.0 56.1 √ √ 1280x800 60.0 49.7 √ √ CVT 1280x854 60.0 53.1 √ √ PC 1280x960 60.0 60.0 √ √ 85.0 85.9 √ √ 1280x1024 60.0 64.0 √ √ Wor kstation (SGI) 60.0 64.6 √ √ Workstation (EWS4800) 71.2 7[...]

Specifications 72 Runco CinemaWall SP Series Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

[...]

Runco CL-810 Owner’ s Operating Manual Runco International • 2900 Faber S treet • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com SERIAL NUMBER RUMA-011 205 rev 02-28-07 v3.1 xa[...]