Siemens RS232 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37

Go to page of

A good user manual

The rules should oblige the seller to give the purchaser an operating instrucion of Siemens RS232, along with an item. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction.

What is an instruction?

The term originates from the Latin word „instructio”, which means organizing. Therefore, in an instruction of Siemens RS232 one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities. An instruction is a compilation of information about an item/a service, it is a clue.

Unfortunately, only a few customers devote their time to read an instruction of Siemens RS232. A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects.

What should a perfect user manual contain?

First and foremost, an user manual of Siemens RS232 should contain:
- informations concerning technical data of Siemens RS232
- name of the manufacturer and a year of construction of the Siemens RS232 item
- rules of operation, control and maintenance of the Siemens RS232 item
- safety signs and mark certificates which confirm compatibility with appropriate standards

Why don't we read the manuals?

Usually it results from the lack of time and certainty about functionalities of purchased items. Unfortunately, networking and start-up of Siemens RS232 alone are not enough. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Siemens RS232, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Siemens service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Siemens RS232.

Why one should read the manuals?

It is mostly in the manuals where we will find the details concerning construction and possibility of the Siemens RS232 item, and its use of respective accessory, as well as information concerning all the functions and facilities.

After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid.

Table of contents for the manual

  • Page 1

    G i g a s e t M 1 0 1 D a t a coverm1.fm5 14.4.99 ACHTUNG! Schnittkante ggf. auf Titelseite U1 nach außen versetzen wg. Falz-Ausklappseite s The cordles s V .24/RS232 interface for PCs, modems and other equipment Operating instruction Please read the safety precautions outlined in these operating instructions before putting the unit into service. [...]

  • Page 2

    2 klapps1.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 The most important menus Setting the operating mode Registering a Gigaset M 10 1 Data Starting the program[...]

  • Page 3

    3 klapps1.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Overview 1 2 3 4 5 Back 4. Port for the V .24/RS232 cable 1 = male 2 = female 5. Mains power supply socket for plug-type AC adapter Legend Front 1 . Operating LED, illuminated when power supply is active, see " LEDs and buttons " on page 19 2. Data LED, illuminated [...]

  • Page 4

    Contents 4 giga_m101.IVZ 14.4.99 Gigaset M101 Data , eng/deut : A30853-X400-B104-3- Updates and news on the Internet ................................................................................................ 5 Approval and conformity ..............................................................................................................[...]

  • Page 5

    Contents 5 giga_m101.IVZ 14.4.99 Gigaset M101 Data , eng/deut : A30853-X400-B104-3-74D1 Tips & tricks, settings ................................................................................................................ 24 Operating from a local station with two remote stations: ............................................................ [...]

  • Page 6

    6 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Approval and conformity Y our Siemens Gigaset M 10 1 Data has been certified by the Ger- man Federal Office of Telecommunication Approval (BZT). This equipment has been approved in accordance with the EU direc- tive 91/263/EC Telecommunication T erminals. This data terminal [...]

  • Page 7

    Introduction 7 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Introduction What is a Gigaset M 10 1 Data ? Y our Gigaset M 10 1 Data is a cordless V .24/RS232 serial inter- face consisting of two stations: the lokalen Station and the Part- nerstation . The station connected to the PC is known as the "lokale Station&qu[...]

  • Page 8

    Putting into service 8 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Putting into service Follow the step-by-step instructions described below for putting the equipment into service: 1 . Check the contents of the package 2. Install the configuration program 3. Connect the station 4. Conclude commissioning by performing an[...]

  • Page 9

    Putting into service 9 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Installing the program package Prerequisites for installation For installation, you need: ● an IBM-compatible PC with the following configuration: – Win 95, Win 98 or Win NT operating system – 2 MB free hard disk memory – 1 free V .24/RS232 seria[...]

  • Page 10

    Putting into service 10 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Connecting stations ● To avoid damaging your Gigaset M 10 1 Data and the PC, the V .24/RS232 cable should only be connected when the pow- er supply is switched off. ● Connect a Gigaset M 10 1 Data to the V .24/RS232 interface of the PC (COM port). S[...]

  • Page 11

    Initial configuration 11 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Initial configuration The purpose of initial configuration is to register the Teilnehmer station at the Basis station. Y ou can only perform initial configu- ration with the configuration program. The Gigaset M 10 1 Data can be operated at other PCs/op[...]

  • Page 12

    Configuration program options 12 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Configuration program options General Y ou will rarely need the majority of configuration options for the simple implementation of two Gigaset M 10 1 Data units for cord- less modem operation. A range of settings is available for future develop[...]

  • Page 13

    Configuration program options 13 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 "Connection" tab Upper section: connecting to the PC Y ou can set the COM port of the PC at which the lokale Station is connected in the upper section of the tab. It is easiest to leave the option No automatic detection deacti- vated [...]

  • Page 14

    Configuration program options 14 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 "Operating mode" tab Important: If one station is set to " AT commands, local" or "AVM/Eumex commands, local", the other station must switch to the corre- sponding " AT commands, remote" or "AVM/Eume[...]

  • Page 15

    Configuration program options 15 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Special settings for "Direct connection" mode In the Direct connection setting, the fields are activated in the lower section of the dialog box: you can set the transmission pa- rameters for the COM port at the PC: Select the masked-i[...]

  • Page 16

    Configuration program options 16 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Changing a station type Normall y , a Teilnehmer station is operated at the PC and the Ba- sis station is operated at a peripheral device. Other constella- tions, however, are possible in which both stations are connect- ed to another PC, in or[...]

  • Page 17

    Configuration program options 17 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Registering an T eilnehmer station Both stations are powered. A Gigaset M 10 1 Data is connected to the PC. Select the Local station tab. The following dialog box appears: An existing registered device in the "Registered stations" win[...]

  • Page 18

    Configuration program options 18 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 The Teilnehmer station now searches for the Basis station and automatically registers at it. If registration is not possible (Basis station not in "logon mode" or not powered, incorrect PIN), the system will indicate the nec- essary s[...]

  • Page 19

    LEDs and buttons 19 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 LEDs and buttons There are two LEDs and a black button on the front of the Gigas- et M 10 1 Data unit. Both button functions Setting a Basis to logon mode Press the button on a powered base-type device for 10 seconds. The two LEDs blink in sequence, thus in[...]

  • Page 20

    What happens if... 20 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 What happens i f... If a malfunction occurs, check the following points: ● Both stations are powered. ● The cable connections to the connected devices are fully in- serted and screwed in. ● The stations are not too far apart and are there are no lar[...]

  • Page 21

    What happens if... 21 gigam101.fm5 21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 T emperature and ambient conditions The Gigaset M 10 1 Data is designed for operation in protected rooms with a temperature range from +5°C to +45°C. Do not set up the Gigaset M 10 1 Data in damp environments, such as a bathroom or laundry room. Do not [...]

  • Page 22

    22 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 The V .24 interface Name Based on CCITT Meaning Std. Pin Assign. 25-pin 9-pin DCD 109 = Data Carrier Detect Data carrier signal 8 1 CTS 106 = Clear T o Send Clear to send signal 5 8 DSR 107 = Data Send Ready Data send ready 6 6 DTR 108 = Data T erminal Ready Data terminal r[...]

  • Page 23

    23 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Why set a mode? T echnical background Serial interfaces are more than plug-in connections. They have an integrated data flow control, control lines, data lines and an adjustable speed function. Serial interfaces are used for trans- porting data in various formats. Modems ar[...]

  • Page 24

    Tips & tricks, settings 24 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Tips & tricks, settings This section describes settings, implementation options and programming methods. Operating from a local station with two remote stations: Please note that ● Only one connection can be active. ● Only one " Teil[...]

  • Page 25

    Tips & tricks, settings 25 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 To switch from Gigase t 2 to 3, simply click Change station type on the Local Station tab. P C- P C direct cable connection: via RS232/ V .24 interface The problem that often occurs withP C- PC direct cable connec- tions is incorrect baud rate se[...]

  • Page 26

    Tips & tricks, settings 26 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Setting the direct connection to the correct baud rate 1 . Open the terminal program The first step is to open a terminal program on both PCs (e.g. Win95 Hyper Terminal via Hypertrm.exe) and to ensure that the correct COM port is being accessed, [...]

  • Page 27

    Tips & tricks, settings 27 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 The baud rate (max. 11 5,200) and HW handshake (default setting) are set in this mask. If you are able to transmit data from one PC to the othe r , proceed now to the second step. 2. Set direct cable connection parameters Exit the terminal progra[...]

  • Page 28

    Tips & tricks, settings 28 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Y ou will find maximum speed setting in the Modem tab; this should be set to 11 5,200 bps. Activate Hardware under Use flow control in the Settings - Advanced tab. Click OK to exit each window. 3. Test the baud rate setting Open the direct cable [...]

  • Page 29

    Tips & tricks, settings 29 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Select Modify under Settings and activate Guest . Enter the port, e.g. “ Null-Modem Cable at CO M 1 ” . To enable access by the other PC, the host (controlling) and guest (accessing), as well as the file and print sharing option must be activ[...]

  • Page 30

    Tips & tricks, settings 30 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Click File and Print Sharing in the sub-windo w . Set the parameters here. If a modification was made, new drivers are loaded and Windows must be restarted. If file and print sharing was already activated, the computer does not need to be restart[...]

  • Page 31

    Tips & tricks, settings 31 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 If the computer was not restarted, the following window ap- pears: If file/printer sharing has not yet been activated, you can activate this feature, see " Sharing files " on page 32. In the final windo w, select Finish and click OK to [...]

  • Page 32

    Tips & tricks, settings 32 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Sharing files Since the Windows information given in the previous mask is somewhat confusing, and since no references are made to the File Manager/Explore r , here is the correct procedure. Once file sharing has been activated and the PC restarte[...]

  • Page 33

    Tips & tricks, settings 33 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 P C- PC direct cable connection problems: examples Other modem drivers installed continue to operate at the same COM port (special ISDN TA drivers, CAPI modem drivers or sim- ilar so f tware are often the cause of the problem). Once successfully [...]

  • Page 34

    Tips & tricks, settings 34 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 When "AVM/Eumex" is set, the special features of the AVM proprietary (company-specific) protocol are taken into consider- ation. In this case the speed settings are not compliant with AT Hayes commands. Support Updates and news on the I[...]

  • Page 35

    Tips & tricks, settings 35 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Configuration management Problems with application programs: Fault Cause Solution Configuration program displays the message "A Gigaset M 10 1 Data could not be found". The COM port used is being used by another program. Close the appli[...]

  • Page 36

    Tips & tricks, settings 36 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Hardware problems (PC, modem, ISDN TA.): The modem parameter request function is not working or is not correct. For example, under Win 95 with <Start><Settings><Control Panel><Modem Proper- ties><Diagnostics><Deta[...]

  • Page 37

    Tips & tricks, settings 37 appendix.fm5 16.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1 Miscellaneous Faxes are distorted when sent with ELSA Microlink 56k and Win Fax 8.0 software. Incorrect driver for voice func- tions set under WinFax 8.0. During installation, Win Fax 8.0 requires a modem driver to be selected for voice functions[...]