TP-Link TL-SC3171G manual

TL-SC3171G Wireless Day/Night Surveillance Camera REV : 1.0.0 1910010292[...]

COPYRIGHT & TRADEMARKS S pecifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., L TD. Other brands and product names are trademarks or registered trademarks of t heir respective holders. No part of the specificatio ns ma y be reproduced in any form or by any means or used to make any derivativ[...]

FCC ST A TEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lim its are designed to pro-vide reasonabl e protection against harmful interference in a residential inst allation. This eq uipment generates, uses and can radiate radio frequency energy and, [...]

CONTENTS Package Co ntents............................................................................................................... .......... 1 Chapter 1 Mini mum System Requirement s ............................................................................. 2 Chapter 2 Physical Overvie w ..................................................[...]

6.3 Networ k ........................................................................................................................ 34 6.3.1 Informat ion ........................................................................................................... 35 6.3.2 PPPoE (Poin t-to-Point Prot ocol over Ethernet) .............................[...]

1 Package Content s The follow items should be found in your package: ¾ TL-SC3171G Wireless Day/Ni ght Surveillance Camera ¾ Power Adapter ¾ Mounting Bracket with three screws, a Lock Ring, a Brace and a Base Plate ¾ RJ45 Cable ¾ Quick Installation Guide ¾ Resource CD, including: z This User Guide z Other helpful information ) Note: Make sure[...]

2 Chapter 1 Minimum System Requirement s We strongly recommend your computers follow our minimum requirements in order to use this IP-Camera normally . If your computer doesn’t m eet these requirements below , it might cause some problems. Item Requirement s CPU Pentium 4 1600MHz (or equivalent AMD) Graphic Card 64 MB RAM graphic cards(or equival[...]

3 Chapter 2 Physical Overview 2.1 Front View Figure 2-1 Focus Adjustment Ring : Adjust the focus to get a clear image. Built-in Microphone : Built-in microphone for two-way audio. 2.2 Bottom view Figure 2-2 Wireless Antenna : For connection of IEEE 802.1 1b/g wireless network. Audio In : T o support audio in with Microphone for two way audi o. Audi[...]

4 then press and hold the Reset Button for at least 10 seconds. T he CPU of the camera starts to work completely 1 minute after you release the Reset button. I/O T erminal Connector : Input/Output to support External Alarm and Sensor used for motion detection, event triggering and alarm notification, etc. Network Connector : For connection to the E[...]

5 Chapter 3 Using IP Camera via Web Browser 3.1 Obtain the IP Address 1. Insert the provided CD into your CD-ROM driver . The Setup Wizard will automatically pop up on your computer ’s screen as shown in the figure below . Figure 3-1 2. Choose the Intelligent IP Inst aller , and then the next screen appears. Click on Intelligent IP Inst aller to [...]

6 Figure 3-2 3. After the inst allation is finished, click S tart > Program Files > T P-LINK >Intelligent IP Inst aller to start using the program. Figure 3-3 4. The following screen will then display . Click the Search button to search Net work Cameras in the network; it displays Network Came ras information including IP Address.[...]

7 Figure 3-4 3.2 Windows Web Browser 1. Click Link to IE button in Figure 3-4 or launch your web br owser , and enter the IP address (obtain from Figure 3-4 Figure 3-4) of the IP came ra in the Location / Address field of your browse r . ) Note: 1) For the first time login wi th IE, you will need to enable “ Download signed ActiveX contro ls ”.[...]

8 below . Figure 3-5 ) Note: The default User name “admin” and Password “a dmin” are set at the factory for the administrator . Y ou can change them in the A ccount Menu (Please check “ SETTING → BASIC → Security → Account ”). 3. The web-based managem ent page will display on y our screen. On the lef tmost column of the web-based [...]

9 3.3 Mac Web Browser 1. Click the Safari icon on the screen as the figure below s hown, and enter the IP address of the IP camera (which can be obt ained from Figure 3-4) in the Location / Address field of your browse r . ) Note: If you only want to view the video wit hout setting page, enter “http://<IP>/index2.htm ” as your web URL. Fo[...]

10 2. Enter the default User na me “admin” and passw ord “admin” in the dialog box as shown below . Figure 3-8 ) Note: The default Name “admin” and Password “admin” are set at the factory for the administrator . Y ou can change them in the Acc ount Menu (Pl ease check “ SETTING → BASIC → Security → Account ”).[...]

11 3. The web-based manage ment page will be display on your screen. In the leftmost column of the web-based manage ment page are Setting , Client Setting , and Image Setup . For more details, you can refer to Section 5.2 , Section 5.3 and Section 5.4 . Figure 3-9[...]

12 Chapter 4 Using IP Camera via Mobile Phone Y ou can use TP-LINK W eb User Interface via mobile phones. T o use IP cameras via mobile phones, please make sure your R TSP is set to “On” (Default is “On”). T o change the settings of IP cameras, Please check “ Settings → Basic → Camera → General ”. Up to the 15 th August, it has be[...]

13 ) Note: Y ou can also use R TSP clients (RealPlayer , VLC, Qu ickT ime Player etc) to view RTSP streaming, just type in “rtsp://<IP>:<PORT>/video.3gp ” as the Player URL. Below is an example of viewing the came ra in 3G streaming mode on NOKIA N76: 1. Click Function and select Gallery . 2. Click the Streaming links . 3. Click Opt[...]

14 5. Open with Real-Player and click Ye s to connect. 4.2 3G Web Brower Mobile V iew Mode For 3G Web Browser Mobile V iew Mode, please type “http://<IP> ” into your 3G Mobile’s Web Browser . <IP> is the Public IP address of your IP camera (which can be obtained from Figure 3-4 Figure 3-4); For Example: rt sp://19 2.168.1.100:554/[...]

15 3. Enter name and p assword. Default values are both admin. Then click Log in. 4. The TP-LINK User Interface and live image will show up in the middle of the screen. ) Note: It will show continuous snapshot s not a real time video streaming. T herefore, the recording feature is disabled.[...]

16 4.3 2.5G W AP Browser Snap shot Mode For 2.5G W A P Browser Snap shot Mode, please type “<IP>/mobile.wml ” into your 2.5G W AP Browser . <IP> is the IP address of your IP camera, which can be obt ained from Figure 3-4. 4.4 2.5G Web Browser Snap shot Mode For 2.5GWeb Browser Snapshot M ode, please type “<IP>/mobile.htm ”[...]

17 3. Click Setting I and select protocol with TCP . 4. Click Setting II and select System Settings . 5. Click OK and connect to IP Camera.[...]

18 T o use IP Camera via Opera Mobile with Window s Mobile Smart Phone, ple ase take the following steps: 1. Download the ” Opera Mobile 9.5.cab “ and copy to Windows Mobile 6 Smart Phone. 2. Click the “ Windows Explorer ” to find the download cab file. 3. Click the cab file to install the Opera Mobile 9.5. 4. Click Programs to find the Ope[...]

19 5. T ype IP or http url link. 6. T ype the username and password or setup authentic ation off in Setting > Basic > Security > Account .[...]

20 Chapter 5 Configuration of Main Menu You would find that the illustra tive web pages in this Manual ar e all orange. Please note that they're from our latest firmware, which can be downloaded from our website. Web pa ges in our previous firmware are blue. On the leftmost column of the web-based management page are Setting , Client Setting ,[...]

21 5.1.1 Zoom in/out the image vi a the monitor window z Click to display the digit al zoom in window . z Pull to adjust the digit al zoom range, and it will be showed on the above windo w . z Y ou can use the left click of your mouse to move the to any where on the window to view the desired detail more clearly . 5.1.2 V ideo play buttons Symbols [...]

22 Microphone turned on mean you can broadcast to the connected IP camera(s) via the Ethernet using your microphone Microphone turned off V olume control bar 5.2 Setting This function is only for the Ad ministrator . Click this button to get into the Basic and Advance settings menus. There are four sub-menus under the BASIC menu, which includes Sys[...]

23 5.3 Client Setting This function is only for the client. Click this button to configure the se ttings of IP Camera, which includes Mode , View siz e , Protocol , and Video buffe r . 5.3.1 Mode Click the drop-down list to choose MPEG4 , MJPEG and JPEG video compression mode. ) Note: MJPEG streaming is unavailable if RTSP mode is On (Please check [...]

24 5.3.3 Protocol Select the transferring protocol from TCP , UDP , HTTP and Multicast . ) Note: This item appears only when RSTP mode is enabled (selecting SETT ING → BASIC → Camera → General ). 5.3.4 V ideo Buffer T urn the Video Buf fer function ON / OFF . The Video Buffer function makes the streaming more smoothly in unsteady network envi[...]

25 5.4.2 Contrast The contrast is a measure of a display system, defined as the ratio of white to bla ck that the system is cap able of prod ucing. The higher value the contrast is, the more delicate color you can get. 5.4.3 Saturation The saturation of a color is determined by a comb ination of light intens ity and how much it is distributed acros[...]

26 Chapter 6 Setting-BASIC Click BASIC to display the submenus including System , Camera , Network , and Security . 6.1 System Click Sy stem to display the submenus including Information , Date/Time , and Initialize . 6.1.1 Information The Information p age provides the basic information of the product which includes Product name, Firmware version [...]

27 6.1.2 Date/T ime The Date/Time p age displays all options of time setting. ¾ Current date/time : Displays the current date and time of this IP Camera. ¾ PC clock : Displays the date and time of the monitoring PC clock. ¾ Date/time format : Y ou can click the drop-down list to sele ct dif ferent time display formats. ¾ Adjust : Y ou can selec[...]

28 synchronize the date and time of this IP Came ra with those of the time server , known as the NTP server . ) Note: The NTP server (Network T ime Protocol) is the time server which is an Internet standard protocol built on the top of TCP / IP . This a ssures accurate synchronization to the millisecond of computer clock time in a network of comput[...]

29 turn off the IP Camera power or disconnect the network until the upg rading is completed. ¾ Upload language p ack : Upgrade the device lang uage pack. Click Browse… and select the file for upgrading. A confir mation dialogue will appear . Click OK to start upgrading. The upgrade is applied immediately . T he default language is “English”.[...]

30 ¾ RTSP : Switch On or Of f. z RTSP Port : S pecify the transmission port number of RTSP streaming. The default value is 554. z Port Range : S pecify the transmission port range of RTP streaming video. RTP will select a port randomly from this range. ) Note: RTSP (Real T i me S treaming Protocol) is a protocol used in streaming media system whic[...]

31 ¾ Vie w er Authentication: If the viewer authentication is On , the users will be requested to type in username and password when viewing through RTSP . ¾ Multicast Streaming (If it is ON) z Multicast address : S pecify the multicast server address. z Video/Audio port : S pecify the transmission port number of the video data, which is an even [...]

32 B. Mobile Vie w If RTSP is On (see Setting → Basic → Camera → General), the screen will display as shown below . ¾ Vie w er Authentication: If the viewer authentication is On , the users will be requested to type in username and password when viewing through RTSP . ¾ Multicast Streaming (If it is On) z Multicast Address : S pecify the mu[...]

33 even number from 1024 to 65534. It is set to 10000 and 1 1000 b y default. z Time-T o-Live : Set the maximum TTL(T ransistor-T ransis tor Logic) that mu lticast can pass through. ¾ Image Size : The image size of Mobile View is fixed at 160 x 120. ¾ Frame Rate : Set the frame rate of the MPEG4 image. Y ou can choose values from 5, 10f ps. The u[...]

34 If RTSP is Off (see Setting → Basic → Camera → General), the screen will display as shown below . ¾ Image Size : S pecify the image size when the netwo rk camera transmits. Y ou can choose among 640 x 480, 320 x 240, and 160 x 120. ¾ Frame Rate : Set the frame rate of the MJPEG image. Y ou can choose values from 1, 2, 3, 4, 5, 7, 10, 15f[...]

35 6.3.1 Information The p age of Information displays the MAC address of the device. ¾ Obt ain an IP address automatically (DHCP) : (If a DHCP server is installed on the network) Select this, the IP will be assigned by the DHCP server . ¾ Obt ain DNS server address au tomatically : Select this to obt ain the address of DNS server automatically .[...]

36 ¾ Use the following IP address : Select this when the fixed IP address is set. z IP address : Enter the IP address of the device. z Subnet mask : Enter the subnet mask. z Default gatew ay : Enter the default gateway . ¾ Use the following DNS server address : Select this when you set the fixed IP address as the IP address o f DNS server . z Pri[...]

37 6.3.2 PPPoE (Point-to-Point Protocol over Ethernet) If your ISP provides Dynamic IP with authentic ation by username and password, enter all PPPoE information in this part. When you use the PPPo E function, you need to tu rn on the DDNS or IP Notification function at the same time. ¾ IP address : The IP address obtained when the IP camera conne[...]

38 ¾ Use the following DNS server address : Select this when you set the fixed IP address as the IP address o f DNS server . z Primary DNS server : Enter the IP address of the primary DNS server . z Secondary DNS serve r: Enter the IP address of the secondary DNS server . ) Note: 1. PPPoE (Po int-to-Point Protocol over Ethernet): PPPoE is a networ[...]

39 6.3.3 DDNS (Dynamic DNS) Choose menu “ Dynamic DNS ”, you can configure the Dynamic DNS function. The IP Camera offers the DDNS (Dynamic Domain Name System ) feature, which allows the hosting of a website, FTP server , or e-mail serv er with a fixed domain name (named by yourself) and a dynamic IP address, and then your friends c an connect [...]

40 2. Input all information and fo llow step by step with DynDNS. . 3. Log in with new account and click Account → My Hos ts → Add Host Services .[...]

41 4. Type domain in the Hostname field and select sub-domain. 5. After typing in information, check your DDNS service.[...]

42 6. Type your DDNS User ID , Password and Host name in Setting → Basic → Netw ork → DDNS . After completing setting, reboot IP Camera. 6.3.4 UPnP (Universal Plug and Play) Choose menu “ Network → UPnP ”, and you can view the information about UPnP (Universal Plug and Play) in the screen as shown in the following figure. The UPnP featu[...]

43 ¾ HTTP port : Enter the HTTP port number and the default HTTP port is 80. ¾ SSL port : Enter the SSL port number and the default SSL port is 443. ¾ MPEG4 RTSP port : Enter the MPEG4 RTSP port, default value is 554. ) Note: UPnP (Universal Plug a nd Play) : UPnP is a set of computer netwo rk protocol. It allows devices to connect seamlessly an[...]

44 ¾ Device Name : Enter Device Name to your needs. ) Note: How to use Bonjour in your Windows Browser UI? Please check the link below: http://www .apple.com/support/downloads/bonjourforwindows.html 6.3.6 IP Notification When network notify type is set to “ON”, you can send an e-mail notification of the completion of the network setting.[...]

45 ¾ Notify T ype : Y ou can select the notify ty pe among DHCP , S tatic IP , and PPPoE. ¾ SMTP Server Name : T ype the SMTP server name up to 64 characters, or the IP address of the SMTP se rver . ¾ SMTP Server Port : Y ou can set port number from 1~65535 according to your mail server . The default value is 25. z SSL : It is Security setting. [...]

46 z User name, Password : T ype the user name and Password of the user who has the mail account. This setting is necessary when the SMTP server which sends e-mails performs authentication. ¾ Recipient e-mail address : T ype the recipient e-Mail address. Y ou can specify more than one recipient E-mail address using “;” to separate. ¾ Administ[...]

47 The wireless network has to be set up by using c able network connection. Af ter setting the camera correctly , the wireless function can work wit hout cable network connec tion. Please follow the setting process below step by step: 1. Connect IP Camera with Ethernet connection. 2. Go to SETTING → BASIC → Netw ork → Wireless , and choose o[...]

48 6. Choose the option of Obt ain an IP address automatically (DHCP) or Use the following IP address:[...]

49 ¾ Use the following IP address : Select this when the fixed IP address is set. z IP address: Enter the IP address of the device. z Subnet mask: Enter the subnet mask. z Default gateway: Enter the default gateway . ¾ Use the following DNS server address : Select this when you set the fixed address as the IP address of DNS server . z Primary DNS[...]

50 ¾ Messenger : Check the radio button before On , so you can use your IP Camera via this function. ¾ Protocol : Displays the protocol used. ¾ Login Account : Enter the MSN account registered for you IP Camera. ¾ Password : Enter the password of the MSN acco unt. ¾ Re-type pass w ord : T ype the password again. ¾ Alias : Give an alias for th[...]

51 A. Configuring your IP camera ) Note: If you use a Modem Router to access the Internet, you should set your IP Camera as the virtual server with port range 20000-210 00 on the M odem Router’s web-based management page. 1. Click “ BASIC->Network->Messenger ” to enter the “Messenge r” page. Enable Messenger and then set the Login A[...]

52 B. Add the camera’s msn account 1. Make sure the desired computer with MSN installed. Log into the MSN. 2. Make sure the MSN view plugin is installed. This plugin is embedded in IntelligentIPInst allerSetup(TPLink)-1.1 .16.09.exe and will be installed automatically when you inst all Inte lligentIPInstallerSetup(TP Link)-1.1.16.09.exe. ▲ Y ou[...]

53 5. Check its st atus. Normally it should be online. 6. Click the camera icon and select Vie w a cont act’ s webcam to view the vi deo.[...]

54 7. W ait for a moment, and you will see the video capt ured by your IP Camera. 6.4 Security Click Security to display the submenus including Account and HTTPS .[...]

55 6.4.1 Account The device default account and password setting is “admin / admin”. That means everyone who knows IP address can access the device including all configuration. Therefore, it is nece ssary to assign a password if the device is intended to be accessed by others. ¾ User name : Set a user name between 4-16 characters. ¾ Password [...]

56 z The Operator mode can not only view the Live View but also control the PTZ (apply in speed dome). z The Viewer mode only can view the Live View . ¾ Vie w er Authentication : Allows all viewers direct ly access to Live V iew . 6.4.2 HTTPS HTTPS is a URL scheme used to indicate a secure HTTP connection. It is synt actically identical to the htt[...]

57 ) Note: 1) When enable HTTPS with RTSP on mode, the IP Camera o nly protect the setting such as username and password and do not protect video and audio. 2) When enable HTTPS with RTSP off mode, the IP Camera will protect all setting including video and audio.[...]

58 Chapter 7 Setting-Advance Click Advance to display the submenus including FTP client , SMTP , HTTP event , Alar m output , Schedule , Alarm input , Motion detection and System Log . 7.1 FTP client Use this menu to set up for capturing and sending images to an FTP server . By using FTP client function, you can send the image and video file which [...]

59 7.1.1 General Select On when you use FTP function. The FTP client setting page will appear . Select Off when you do not wish to use the FTP client function. ) Note: The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function. ¾ FTP server name : T ype the FTP server name to upload [...]

60 ¾ Remote Path : T ype the path to the destination in FTP server up to 64 characters. ¾ Image File Name : T ype the file name you want to a ssign to the images when sending to the FTP server . Y ou can use up to 10 alphanumeric characters, - (hyphen) and _ (underscore) for naming. ¾ Suffix : Select a suf fix to add to the file name z Date &[...]

61 ) Note: 1) Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2) Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm Input: Select the connected alarm. Sensor input1: The ex[...]

62 ) Note: Y ou can set the alarm input function at Alarm Input p age. (Please go “ Setting → Advance → Alarm Input → Setting ”). For more details, you can check Section 7.6 . ¾ Effective period : Set the period when the periodical sending is effective. z Always : The periodical sending is always effective. z Schedule : Y ou can spec ify[...]

63 ¾ Image file name : T ype the file name of the image s ent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix : Select a suf fix to be added to the file name sent by SMTP . z None : The name of the sent file will b e the Image file name. z Date Time : The date time suf fix is added to the Image file name. The da[...]

64 ) Note: Y ou can set schedule function on Schedule p age . (Please go to “ Setting → Advance → Schedule → Setting ”) For more details, you can check Section 7.5 . 7.2 SM TP Set the SMTP menu when you want to send an image via e-mail. By using Mail (SMTP) function, you can send a mail with attached image and vid eo which has been shot l[...]

65 The Setting of General will be the same as the se tting of IP Notification (Ple ase check “ SETTING → BASIC → Network → IP Notification ”). ¾ SMTP server name : T ype the SMTP server name up to 64 characters, or the IP address of the SMTP se rver . ¾ SMTP Server Port : Y ou can set port number from 1~65535 according to your mail serv[...]

66 ¾ SMTP : Select it if SMTP authentication is necessary when an e-mail is sent. ¾ POP before SMTP : Sele ct if POP before SMTP authentic ation is necessary when an e-mail is sent. ) Note: When you set to On, be sure to select either or both SMTP or / and POP before SMTP . z POP server name : When the POP before SMTP is selected in Aut henticati[...]

67 7.2.2 Alarm sending Set to send the mail with connection to the alarm det ection by the external s ensor input or by the built-in motion detection function. Select On to send the image and file to SMTP server linked with the alarm detection. ¾ Alarm sending : Select On to set to send mail with c onnection to the alarm detection. ¾ File att ach[...]

68 ¾ Alarm z Motion Detection : Click it for using Motion Detection function as a sensor . Y ou can set motion detection function on the motion detection page.[...]

69 ) Note: 1) Y ou can set motion detection on motion detection page (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2) Motion Detection works only when the MPEG4 functi on is On and the Cropping is set to Off. z Alarm input : Select the connected alarm. Sensor input1 : The [...]

70 ) Note: Y ou can set the alarm input functi on at alarm input page (Please go “ Setting → Advance → Alarm input → Setting ”). For more details, you can check Section 7.6 . ¾ Effective period : Set the period when the periodical sending is effective. z Always : The periodical sending is always effective. z Schedule : Y ou can spec ify [...]

71 ¾ Image file name : T ype the file name of the image s ent by SMTP up to 10 alphanumeric characters, - (hyphen) and _ (under score). ¾ Suffix : Select a suf fix to be added to the file name sent by SMTP . z None : The name of the sent file will b e the Image file name. z Date Time : The date & time suffix is added to the Image file name. T[...]

72 ) Note: Y ou can set schedule function on Schedule p age (Please go to “ Setting → Advance → Schedule → Setting ”). For more details, you can check Section 7.5 . 7.3 HTTP event Use this menu to set up for capturing and sendi ng images to an HTTP server . By using HTTP client function, you can send the image file and audio file whic h h[...]

73 7.3.1 General ¾ HTTP even t: Set up the HTTP server URL, por t, User ID, Password, and Proxy Server settings. For example: URL: 192.168.1.7/cgi-bin/operator/ptzset ) Note: The setting of URL should be the same as CGI. 7.3.2 Alarm sending Set to send the mail with connection to the alarm detection by the built-in motion detection function. Selec[...]

74 Alarm sending : Select On to set to send command with c onnection to the alarm detection. ¾ Alarm z Motion detection : Click it for using Motion Detection function as a s ensor . Y ou can set motion detection function on the motion detection function page. 9 Parameter : the parameter of CGI (defined in Setting → Advance → HTTP event → Gen[...]

75 ) Note: 1. Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2. Motion Detection works only when the MPEG4 function is On and the Cropping is set to Off. z Alarm input : Select the connected alarm. Sensor input1 : The [...]

76 ) Note: Y ou can set the alarm input functi on at alarm input page (Please go “ Setting → Advance → Alarm input → Setting ”). For more details, you can check Section 8.6 . ¾ Effective period : Set the period when the periodical sending is effective. z Always : The periodical sending is always effective. z Schedule : Y ou can spec ify [...]

77 7.4.1 Setting Alarm output : To activate the Alarm output function, select On . When you do not use the Alarm output function, select Off . ¾ Digital output : Select High signal output and Low signal output as your alarm. ¾ Trigger condition : Select the mode of the Alarm ou tput function . You can choose “ Alarm” or “Timer” . ¾ Alarm[...]

78 ) Note: 1. Y ou can set motion detection on motion detection p age (Please go to “ Setting → Advance → Motion detection → Setting ”). For more details, you can check Section 7.7 . 2. Motion Detection works only when the MPEG4 functi on is On and the Cropping is set to Off. z Alarm Input: Select the connected alarm. Sensor input1 : The [...]

79 ) Note: Y ou can set the alarm input function at alarm input p age (Please go “ Setting → Advance → Alarm input → Setting ”). For more details, you can check Section 7.6 . ¾ Alarm duration : There are up to 60 second options to choose for alarm duration interval. ¾ Effective period : Set the period when the periodical sending is effe[...]

80 This is the same menu as the setting menu which is displayed when yo u click Schedule to set Effective period and Schedule in FTP client setting menu, e- Mail (SMTP) setting menu, HTTP Event setting menu and so on. Example: When setting e-Mail (SMT P) (the alarm sending) in the Schedule setting menu. 7.5.1 Setting ¾ Schedule Selection : Select [...]

81 set to Mon (Monday) are applied to all days. In this case, the S tart time and End time of the other days than Mon (M onday) cannot be input. 7.6 Alarm input When you click Alarm Input on the Advance mode menu, the Alarm input setting menu appears. You can set in this menu to control the external alarm input of I / O port on the rear of the devi[...]

82 7.7 Motion detection There are three Motion Detection functions as s ensors to set for different detecting zones. Each one has Threshold and Sensitivit y inputs which you can adjust to specific zone sequentially . Motion Detection function can support to FTP , SMTP and Alarm output for capturing and sending images or starting alarm output.[...]

83 7.7.1 Setting ¾ Threshold : It means the extent whic h the alarm will be triggered. ¾ Sensitivity : It means that how of ten the sensor will sc an the image. The higher sensitivity it is and the more frequently it scans. z Motion Detection 1 : Click it for using Motion Detection 1 function as a sensor . Y ou can adjust and move the detecti ng [...]

84 7.8.1 Setting ¾ Enable remote log : Enables user to send the log data to a specified log server . ) Note: There is a function called W atc hdog which can automatic ally detect error s and restart the IP camera while mpeg, mjepg, 3gpp, or web cannot work. It will take about 5 minutes from detection to reboot, and it will show up with “connecti[...]

85 Appendix APPENDIX a – FRAME RA TE & BIT RA TE T ABLE This chapter provides tables that help you to optimize your IP camera with your network environment. Base on your network upload environ ment to choose the best Image-Quality setting. For example, if the network environment is ADSL 256Kb(upload) / 2Mb(download), the most fluent Image-Qua[...]

86 320*240 512 30 550 30 320*240 512 15 600 16 160*120 1024 30 950 30 160*120 1024 15 750 16 160*120 512 30 500 30 160*120 512 15 50 16 160*120 128 30 130 30 160*120 128 15 140 16 A.3 MJPEG @ 15f ps / kbp s Quality 640*480 320*240 160*120 Excellent 4000 1500 600 Detailed 2400 900 400 Good 1600 650 300 S tandard 1300 500 240 Medium 900 350 170 A.4 M[...]

87 320*240 Good 5 260 5 320*240 Medium 15 350 13 160*120 Medium 5 130 5 160*120 Excellent 15 600 13 160*120 Excellent 5 230 5 160*120 Good 15 300 13 160*120 Good 5 1 15 5 160*120 Medium 15 170 13 160*120 Medium 5 65 5 APPENDIX b – STORAGE REQUIREMENT T ABLE This chapter provides tables that help you set your recording storage system. Please refer[...]

88 B.3 MPEG4 St orage Requirement GB / channel / day Image-Size Bitrate Setting Frame-Rate Setting Current Bitrate 640*480 2048 30 23.0 640*480 2048 15 22.2 640*480 1536 30 18.5 640*480 1536 15 17.9 640*480 1024 30 10.5 640*480 1024 15 10.5 640*480 512 30 5.3 640*480 512 15 6.3 320*240 1536 30 15.8 320*240 1536 15 16.9 320*240 1024 30 10.5 320*240 [...]

89 FA Q Q1. What can I do if I forgot the login name and p assword? Press and hold the Reset button on the bottom panel with a p in or paperclip. Please continue holding down the Reset button for approximately 15 seconds. And t hen IP Camera will reboot. It will require 45 seconds. Both the default username and password are admin . Q2. Why can’t [...]