Axis Communications M1034-W manual

AXIS M1 034-W Network Camera User Manual[...]

About this document This manual is intended for administrators and users of AXIS M1 034-W Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems[...]

Radio Transmission This equipment may generate or use radio frequency energy . The user could lose the authority to operate this equipment if an unauthorized change or modication is made. USA This device complies with P art 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interferen[...]

your local authority responsible for waste disposal. Businesses should contact the product supplier for information about how to dispose of this product correctly . This product complies with the requirements of Directive 20 1 1/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). China [...]

AXIS M1034-W Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury . CAUTION Indicates a hazardous situation which, if not avoide[...]

AXIS M1034-W Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Other Message Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS M1034-W Network Camera T able of Contents Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . . . . . . .[...]

AXIS M1034-W Network Camera Hardware Overview Hardware Overview 1 2 8 9 1 2 1 1 1 0 1 3 1 4 1 5 1 6 1 7 4 5 6 7 2 1 3 1 Status LED indicator 2 Focus ring 3 Lens 4 Microphone 5 Speaker 6 PIR sensor 7 Light (white illumination LED) 8 Network connector (RJ-45) 9 P ower connector 1 0 Lock ring 1 1 I/O terminal connector 12 Control button 13 WLAN pairin[...]

AXIS M1034-W Network Camera Hardware Overview Network Connector RJ45 Ethernet connector . NO NO NO TICE TICE TICE The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specic use. Make sure that the network devices are installed in accordance with the man[...]

AXIS M1034-W Network Camera Hardware Overview Network LED Indication Green Steady for connection to a 1 00 Mbit/s network. Flashes for network activity . Amber Steady for connection to a 1 0 Mbit/s network. Flashes for network activity . Unlit No network connection. P ower LED Indication Green Normal operation. Amber Flashes green/amber during r[...]

AXIS M1034-W Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® and • Chrome TM or Firefox ® with o[...]

AXIS M1034-W Network Camera Access the Product For more information, see NAT traversal (port mapping) for IPv4 on page 49 . See also AXIS Internet Dynamic DNS Service at www .axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set t[...]

AXIS M1034-W Network Camera Access the Product Controls on the Live View P age Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure stream proles, see page 2 1 . Click P[...]

AXIS M1034-W Network Camera Access the Product For more information about action rules, see Events on page 35 . To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Cong . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is ava[...]

AXIS M1034-W Network Camera Access the Product Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer . Click the Center mode button and click in the image to center the camera view on that position. The center mode button could also be used to zoom in on a specic area. Click i[...]

AXIS M1034-W Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream p[...]

AXIS M1034-W Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control[...]

AXIS M1034-W Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Live View pa[...]

AXIS M1034-W Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all sett[...]

AXIS M1034-W Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 20 . • Stream proles. See page 2 1 . • Camera settings. See page 22 . • View area. See page 22 . • Overlay image. See page 23 . ?[...]

AXIS M1034-W Network Camera Video and Audio • Maximum frame rate . T o avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions. • Overlay se[...]

AXIS M1034-W Network Camera Video and Audio For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created. To create a new prole or modify an existing prole[...]

AXIS M1034-W Network Camera Video and Audio 2. Select an Aspect ratio and a Video stream resolution . 3. Use the mouse to move and resize the view area. 4. Select Enable PTZ to enable digital PTZ for the view area. 5. Click Save to save the settings. Note The PTZ functionality is useful during installation of the Axis product. Use a view area to cr[...]

AXIS M1034-W Network Camera Video and Audio 1. Go to Video & Audio > Overlay Image . 2. Click Browse and browse to the le. 3. Click Upload . 4. The T ransparency Settings page is now displayed: - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Example: To make w[...]

AXIS M1034-W Network Camera Video and Audio Example To display the text “Motion detected” when motion is detected, enter #D in the Include text eld and enter “Motion detected” in the Text eld when setting up the action rule. Privacy Mask A privacy mask is a user-dened area that prevent users from viewing parts of the monitored area[...]

AXIS M1034-W Network Camera Video and Audio Use the Encoding option to select digital audio encoding format. • AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality is a priority , AAC is the recommended codec to use. An AAC license is included [...]

AXIS M1034-W Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 2 1 . • Default Viewer for Browser . See page 27 . • Viewer Settings. See page[...]

AXIS M1034-W Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved t[...]

AXIS M1034-W Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 22 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic positio[...]

AXIS M1034-W Network Camera PTZ (Pan Tilt Zoom) 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify or remove guard tours, go to PTZ > Guard T our , select the guard tour in the Guard T our List and cli[...]

AXIS M1034-W Network Camera PTZ (Pan Tilt Zoom) 5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue. 3 1[...]

AXIS M1034-W Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera T ampering . 2. Set [...]

AXIS M1034-W Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detectio[...]

AXIS M1034-W Network Camera Detectors Note • T o trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • T o avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high histor[...]

AXIS M1034-W Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. [...]

AXIS M1034-W Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Detectors - Audio Detection – Trigger the rule when audio is detected. See Audio Detection on page 34 . - Live Stream Accessed – Trigger the rule when any stream is accessed and during edge storage p[...]

AXIS M1034-W Network Camera Events - System Ready – T rigger the rule when the product has been started and all services are running. This can for example be used to send a notication when the product restarts. • Time - Recurrence – Trigger the rule periodically . See Set Up Recurrences on page 39 . This can for example be used to upload a[...]

AXIS M1034-W Network Camera Events Recipient Use with action Notes Email Send Images Send Notication Send Video Clip An email recipient can contain multiple email addresses. FTP Send Images Send Video Clip HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using Hyper[...]

AXIS M1034-W Network Camera Events Create Schedules Schedules can be used as action rule triggers or as additional conditions, for example to record video if motion is detected outside ofce hours. Use one of the predened schedules or create a new schedule as described below . To create a new schedule: 1. Go to Events > Schedules and click [...]

AXIS M1034-W Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 35 . • To access recordings, see Recording List on page 40 . • To congure camera controlled storage, see Sto[...]

AXIS M1034-W Network Camera Recordings 5. Click Save to save and start the recording. 4 1[...]

AXIS M1034-W Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Sele[...]

AXIS M1034-W Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may a[...]

AXIS M1034-W Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired pr[...]

AXIS M1034-W Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > Ce[...]

AXIS M1034-W Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. Network Interface Mode The network interface to the AXIS product can be wired or wireless. Different settings can be used fo[...]

AXIS M1034-W Network Camera System Options arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP address> <serial number> ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as [...]

AXIS M1034-W Network Camera System Options Advanced T CP/IP Settings DNS Conguration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain DNS server address via DHCP to use the DNS settings provided by the DH[...]

AXIS M1034-W Network Camera System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network trafc from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased[...]

AXIS M1034-W Network Camera System Options • Mode shows the type of network, which can be Master (an access point) or Ad-Hoc . • Security shows the type of security the network uses. • Channel shows the wireless channel currently in use. • Signal strength shows the quality , the strength, of the signal. • Bit rate shows the current bit ra[...]

AXIS M1034-W Network Camera System Options If applicable, select the Network type . Select Master to access the network via an access point or Ad-hoc to access any other wireless device and create a local network. Ad-hoc mode allows users to form a wireless LAN without connection through an access point. The Axis product can, for example, connect p[...]

AXIS M1034-W Network Camera System Options Important To ensure successful certicate validation, time synchronization should be performed on all clients and servers prior to conguration. To congure the wireless settings using the WP A TM -/WPA-Enterprise security method and EAP-PEAP/MSCHAPv2: 1. Enter the user Identity associated with your [...]

AXIS M1034-W Network Camera System Options gain access to the protected wireless network, the Axis product presents its certicate to the network switch. If the certicate is approved, the switch allows access. Y ou may need to contact your network administrator for information on certicates, user IDs and passwords CA certicate - Created [...]

AXIS M1034-W Network Camera System Options Note If HTTPS is enabled, SNMP v1 and SNMP v2c should be disabled. Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T rap community that[...]

AXIS M1034-W Network Camera System Options Note Do not insert or eject the SD card while the product is running. The product will lose its connection to the wireless network. Reboot the product to reestablish the wireless connection after the card has been inserted or ejected. The following SD card le systems are supported: • ext4 — recommen[...]

AXIS M1034-W Network Camera System Options Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www .axis.com/products/cam_companion_software/suppor[...]

AXIS M1034-W Network Camera System Options • the default router • the subnet mask • the system time • the IEEE 802.1X settings • the wireless settings Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The Axis product can also be reset to factory default [...]

AXIS M1034-W Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences. Axis[...]

AXIS M1034-W Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The cur[...]

AXIS M1034-W Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Note The emergency recovery procedure only works on the wired interface. Symptoms, P ossible Causes and Remedial [...]

AXIS M1034-W Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Check [...]

AXIS M1034-W Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check that the correct Audio Input source is selected un[...]

AXIS M1034-W Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS M1 034-W Image sensor 1/4" Progressive scan RGB CMOS Lens 2.8 mm, F2.0 xed iris Horizontal angle of view: 80° V ertical angle of view: 5 1° Minimum illumination 1.2 - 100000 lux, F2.0 0 lux with illumination LED[...]

AXIS M1034-W Network Camera T echnical Specifications Function/group Item Specications Wireless interface IEEE 802.1 1g/b/n (80 2.1 1n single stream, 20 MHz channel width) Internal antenna Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 80 2.1X network access control*, digest authentication, user access log WEP 64/[...]

AXIS M1034-W Network Camera T echnical Specifications Function/group Item Specications Casing Color: White NCS S 1 002-B P olycarbonate Memory 256 MB RAM, 128 MB Flash P ower 4.9–5.1 V DC, max. 6.5 W Connectors DC jack RJ45 1 0BASE-T/1 00BASE-TX Terminal blocks with power output, 1 alarm input and 1 output Edge storage Support for recording t[...]

AXIS M1034-W Network Camera T echnical Specifications Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment. Note: This pin can only be used as power out. 3.3 V DC Max load = 50 mA Digital input 3 Connect to pin 1 to activate, or leave oating (unconnected) to deactivate 0 to max 40 V DC Digi[...]

AXIS M1034-W Network Camera T echnical Specifications • Accessing Motion JPEG and H.264 video streams simultaneously . Frame rate and bandwidth affected. • Heavy usage of event settings affect the product’s CPU load. Frame rate affected. • Using HTTPS may reduce frame rate, in particular if streaming Motion JPEG. • Heavy network utilizat[...]

User Manual V er . M4.2 AXIS M1 034-W Network Camera Date: May 20 15 © Axis Communications AB, 2012 - 20 15 P art No. 1476365[...]