Axis Communications P5534E manual

AXIS P5534–E PTZ Dome Network Camera User Manual[...]

About this document This manual is intended for administrators and users of the AXIS P5534-E Network Camera, and is applicable to rmware 5.40 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based syst[...]

Safety This product complies with IEC/EN 60950-1 and IEC/EN 60950-22, Safety of Information Technology Equipment. The product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low V oltage (SELV) and Limited P ower Sou[...]

AXIS P5534–E PTZ Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS P5534–E PTZ Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 6 5 1. Network connector 2. P art number (P/N) & Serial number (S/N). Serial number may be required during installation. 3. Control button 4. SDHC card slot 5. Status indicator LED 6. Restart button Connectors and Buttons For technical specications, see page 5[...]

AXIS P5534–E PTZ Dome Network Camera Hardware Overview SD Card Slot NO NO NO TICE TICE TICE • Risk of damage to SD card. Do not use sharp tools or excessive force when inserting or removing the SD card. • Risk of data loss. T o prevent data corruption, the SD card should be unmounted before removal. To unmount, go to Setup > System Options[...]

AXIS P5534–E PTZ Dome Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are • Internet Explorer ® with Windows ® • Safari ® with OS X ® and • Chrome TM or Firefo[...]

AXIS P5534–E PTZ Dome Network Camera Access the Product Set the Root P assword To access the Axis product, you must set the password for the default administrator user root . This is done in the Congure Root P assword dialog, which appears when the product is accessed for the rst time. To prevent network eavesdropping, the root password can[...]

AXIS P5534–E PTZ Dome Network Camera Access the Product Controls on the Live View P age Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure stream proles, see page 17[...]

AXIS P5534–E PTZ Dome Network Camera Access the Product The Play button connects to the Axis product and starts playing a media stream. The Stop button stops the media stream. The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specied in the AMC Control P anel. Click the View Full Screen butto[...]

AXIS P5534–E PTZ Dome Network Camera Access the Product The PTZ controls can be disabled under PTZ > Advanced > Controls , see Controls on page 25 . 1 1[...]

AXIS P5534–E PTZ Dome Network Camera Media Streams Media Streams The Axis product provides several video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, and to the list of available stream proles. Oth[...]

AXIS P5534–E PTZ Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Contro[...]

AXIS P5534–E PTZ Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 14[...]

AXIS P5534–E PTZ Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. T o open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access [...]

AXIS P5534–E PTZ Dome Network Camera Video Video It is possible to congure the following video features in your Axis product: • Video stream. See page 16 . • Stream proles. See page 17 . • Camera settings. See page 18 . • Overlay image. See page 19 . • Privacy mask. See page 20 . Set Up Video Streams To set up the product’s vide[...]

AXIS P5534–E PTZ Dome Network Camera Video H.264 H.264, also known as MPEG-4 P art 1 0/AVC, is a video compression standard that provides high quality video streams at low bit rates. An H.264 video stream consists of different types of frames such as I-frames and P-frames. An I-frame is a complete image whereas P-frames only contain the differenc[...]

AXIS P5534–E PTZ Dome Network Camera Video Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the color saturation. The value 1 00 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness c[...]

AXIS P5534–E PTZ Dome Network Camera Video Image Settings Important The autofocus behavior is affected by factors such as light conditions, contrasts in the scene, and objects moving in and out. In these conditions or scenes, a manual focus could be preferable to enhance performance and allow the camera to focus faster . Autofocus enabled - Autof[...]

AXIS P5534–E PTZ Dome Network Camera Video To upload an overlay image: 1. Go to Video > Overlay Image . 2. Click Browse and browse to the le. 3. Click Upload . 4. The Transparency Settings page is now displayed: - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Ex[...]

AXIS P5534–E PTZ Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 17 . • Default Viewer for Browser . See page 2 1 . • Viewer Setting[...]

AXIS P5534–E PTZ Dome Network Camera Configure the Live View Page • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to the location specied in the AMC Control P anel. See AXIS Media Control (AMC) on page 12 . User Dened Links To disp[...]

AXIS P5534–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position. A preset position consists of the following values: • P an and tilt positions • Zoom position • Focus position (manual or automatic) • Iris p[...]

AXIS P5534–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) It is also possible to, for example, record video or save images (take a snapshot) while the Gatekeeper is active. Go to Events and set up an action rule with PTZ Preset Reached as trigger . Guard Tour A guard tour displays the video stream from different preset positions, one-by-one, in a [...]

AXIS P5534–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) x Move speed sets the speed of the camera’s pan and tilt movements. The default setting is maximum speed. When using a joystick (or emulating one with the mouse) the Enable proportional speed setting can be used to reduce the maximum pan/tilt movement speed, i.e. the speed the camera view[...]

AXIS P5534–E PTZ Dome Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. Control Queue Note • The administrator can enable and disable PTZ controls for selected users. • To id[...]

AXIS P5534–E PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is used to generate an alarm whenever movement starts or stops in the camera view . Motion detection is congured by dening up to 1 0 Include and Exclude windows: • Include windows — dene areas where motion should be detected • Exclude windows[...]

AXIS P5534–E PTZ Dome Network Camera Detectors High level (1 00%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for a long time before it is considered as non-moving. Ordinary colored objects on ordinary backgrounds trigger motion detection. Medium level (50%) A large difference i[...]

AXIS P5534–E PTZ Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applicati[...]

AXIS P5534–E PTZ Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 30[...]

AXIS P5534–E PTZ Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an ac[...]

AXIS P5534–E PTZ Dome Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 29 . • Detectors - Motion Detection – T rigger the rule when motion is detected. See Motion Detect[...]

AXIS P5534–E PTZ Dome Network Camera Events • Record Video – Record video to a selected storage. • Send Images – Send images to a recipient. • Send Notications – Send a notication message to a recipient. Add Recipients The product can send media les and messages to notify users about events. Before the product can send media [...]

AXIS P5534–E PTZ Dome Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern. 3. Click OK . To use the recurrence in an action rule, [...]

AXIS P5534–E PTZ Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 35 . • To set up action rules, see page 3 1 . • To access recordings, see Recording List on page 35 . • To congure camera controlled stor[...]

AXIS P5534–E PTZ Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that an[...]

AXIS P5534–E PTZ Dome Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 80 2.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 80 2.1X, devices must authenticate themse[...]

AXIS P5534–E PTZ Dome Network Camera System Options If using a host name for the NTP server , a DNS server must be congured. See DNS Conguration on page 40 . • Set manually – Allows you to manually set date and time. If using an NTP server , select your Time zone from the drop-down list. If required, check Automatically adjust for dayli[...]

AXIS P5534–E PTZ Dome Network Camera System Options Linux/Unix syntax arp -s <IP address> <serial number> temp ping -s 408 <IP address> Linux/Unix example arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125 Windows syntax (this may require that you run the command prompt as an administrator) arp -s <IP addre[...]

AXIS P5534–E PTZ Dome Network Camera System Options Advanced T CP/IP Settings DNS Conguration DNS (Domain Name Service) provides the translation of host names to IP addresses. The DNS settings are congured under System Options > Network > T CP/IP > Advanced . Select Obtain DNS server address via DHCP to use the DNS settings provide[...]

AXIS P5534–E PTZ Dome Network Camera System Options NAT traversal (port mapping) for IPv4 A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network trafc from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) i[...]

AXIS P5534–E PTZ Dome Network Camera System Options QoS (Quality of Service) QoS (Quality of Service) guarantees a certain level of a specied resource to selected trafc on a network. A QoS-aware network prioritizes network trafc and provides a greater network reliability by controlling the amount of bandwidth an application may use. The [...]

AXIS P5534–E PTZ Dome Network Camera System Options RTP/H.264 The RTP port range and multicast settings are congured under System Options > Network > RTP . The RTP port range denes the range of ports from which the video ports are automatically selected. For multicast streams, only certain IP addresses and port numbers should be used.[...]

AXIS P5534–E PTZ Dome Network Camera System Options 3. Click Unmount . 4. The card can now be removed. Format SD Card NO NO NO TICE TICE TICE Formatting the SD card will remove all data and recordings stored on the card. Important If autoformat is enabled, only use new or empty SD cards. Any data stored on the card will be lost when the card is i[...]

AXIS P5534–E PTZ Dome Network Camera System Options Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. Note A restart clears all entries in the Server Report. Click Restore to reset most settings to the factory default values. The following settings are not[...]

AXIS P5534–E PTZ Dome Network Camera System Options P arameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams. Crash Report - Generates an archive with debugging informa[...]

AXIS P5534–E PTZ Dome Network Camera System Options 2. Release the restart button but continue to hold down the control button for about 15–30 seconds until the status LED indicator ashes amber . 3. Release the control button. The process is complete when the status LED indicator turns green. The product has been reset to the factory default[...]

AXIS P5534–E PTZ Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular probl[...]

AXIS P5534–E PTZ Dome Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, P ossible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Tr[...]

AXIS P5534–E PTZ Dome Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the cl[...]

AXIS P5534–E PTZ Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur . T o identify the source of the problem, check the System Log under System Options > Support > Log[...]

AXIS P5534–E PTZ Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS P5534-E 50 Hz, AXIS P5534-E 60 Hz Image sensor Progressive scan CCD 1/3” Lens f=4.7 – 84.6 mm, F1.6 – 2.8, autofocus, automatic day/night Horizontal angle of view: 55.2° - 3.2° Minimum illumination Colo[...]

AXIS P5534–E PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specications available at www .axis.com Includes the ONVIF specication available at www .onv[...]

AXIS P5534–E PTZ Dome Network Camera T echnical Specifications Function/group Item Specications Video management software (not included) AXIS Camera Station — Video management software for viewing and recording up to 50 cameras See www .axis.com/products/video/software/ for more software applications via partners Optional accessories AXIS T[...]

User Manual V er . M2.4 AXIS P5534–E PTZ Dome Network Camera Date: January 2015 © Axis Communications AB, 20 15 P art No. 62038[...]