Bosch Appliances NBN-921 manual

DinionHD 720p IP Camera NBN-921 en Installation and Operation Manual[...]

[...]

DinionHD 720p IP Camera Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 T able of Contents 1S a f e t y 8 1.1 Safety precautions 8 1.2 Important safety instructions 9 1.3 Connection in applications 10 1.4 FCC & ICES compliance 11 1.5 MicroSD cards 12 1.6 UL certification 12 1.7 [...]

4 en | Table of Contents DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 22 4.1 Unpacking 22 4.2 System requirements 23 5 Installation 24 5.1 Lens mounting 24 5.2 Mounting the camera 25 5.3 Network (and power) connector 26 5.4 Power connector 27 5.5 Alarm and relay connecto[...]

DinionHD 720p IP Camera Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.3 Date/Time 42 8.4 Network 43 8.5 Encoder 44 8.6 Audio 44 8.7 Recording 44 8.7.1 Storage medium 44 8.8 System Overview 44 9 Advanced Mode 45 9.1 Advanced Mode menu tree 45 9.2 General 46 9.2.1 Identification 4[...]

6 en | Table of Contents DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.5.5 Recording Status 78 9.6 Alarm 79 9.6.1 Alarm Connections 79 9.6.2 Video Content Analyses (VCA) 82 9.6.3 VCA configuration- Profiles 83 9.6.4 VCA configuration - Scheduled 89 9.6.5 VCA configuration - Event [...]

DinionHD 720p IP Camera Table of Cont ents | en 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.2 Recordings page 115 10.2.1 Controlling playback 115 11 Troubleshooting 117 11.1 Function test 117 11.2 Resolving problems 118 11.3 Customer service 120 12 Maintenance 121 12.1 Testing the network connection[...]

8 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product. If not avoided, this will result in an electrical sho[...]

DinionHD 720p IP Camera Safety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Follow all warnings on the unit and in the operating instructions be fore operating the unit. 1. Clea[...]

10 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.3 Connection in applications Power lines: An outdoor system should not be located in the vicinity of overhead power lin es, electrical lights, or power circuits, or where it may contac t such power lines or circuits. Whe[...]

DinionHD 720p IP Camera Safety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.4 FCC & ICES compliance FCC & ICES Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . Thes e limits are designed to[...]

12 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.5 MicroSD c ards Some microSD cards have been foun d to generate high levels of electromagnetic interference that can disturb the normal behavior of some telecom or me dical equipment. We advise you to choose and test yo[...]

DinionHD 720p IP Camera Safety | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 1.7 Bosch notices Video / Recording loss Bosch Security systems reco mmends that local storage on microSD card should only be used for alarm recordin g and Automatic Network Replenis hment (ANR) applications. To minimize t[...]

14 en | Safety DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 1.8 Copyrights The firmware uses the fonts "Adobe-Helvetica-Bold-R-Normal-- 24-240-75-75-P-138-ISO10646-1" and "A dobe-Helvetica-Bold-R- Normal--12-120-75-75-P-70-ISO10646-1" under the following copyrig[...]

DinionHD 720p IP Camera Introduction | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 2 Introduction 2.1 F eature s The DinionHD 720p IP Day/Night camera is a high-performance, surveillance color camera. It incorporates 15-bit digital signal processing for outstanding picture performance. The camera u[...]

16 en | Introduction DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems – Password protection to prev ent unauthorized connection or configuration changes – Event-driven, automatic co nnection (for example, at switch-on and for alarms) – Fast, convenient configurati on using the in[...]

DinionHD 720p IP Camera Syst em Information | en 17 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3 Syst em Information 3.1 Over view of functions The camera incorporates a network video server. Its primary function is to encode video and control data for transmission over an IP network. With its H.264 enc[...]

18 en | Syst em Information DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.1.4 ONVIF (Ope n Network Video Interface Forum) The camera complies to the ONVIF standard which means that it is easier to install and inte grate into larger systems. The ONVIF standard is a global standa rd[...]

DinionHD 720p IP Camera Syst em Information | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 3.1.11 Encryption The unit offers a variety of options fo r protection against unauthorized reading. Web browser connections can be protected using HTTPS. Protect the control channels via the SSL encryption pr[...]

20 en | Syst em Information DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3.2 Operation with external sy stems The camera can be used with a variety of Bosch software and hardware systems: – Bosch Video Management System – Bosch Video Client – Bosch Recording Station – Note:[...]

DinionHD 720p IP Camera Syst em Information | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 camera, such as controlling relays , remote control of peripheral devices, and remote configuration. It can use alarm inputs to trigger actions and, when motion detection Motion+ is active, can record the rele[...]

22 en | Planning DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4 Planning 4.1 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: – DinionHD 720p IP camera – CCD protection cap (m ounted on camera) – Power connector – Alarm I/O connector ?[...]

DinionHD 720p IP Camera Planning | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 4.2 System r equirements – Computer with Windows XP/Vista operating system, network access, and Microsof t Internet Explorer web browser version 7.0 or later or – Computer with Windows XP/Vista operating system, netw[...]

24 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5 Installation 5.1 Lens mounting Note If a short circuit is detected on the lens connector, the message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the len[...]

DinionHD 720p IP Camera Installation | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.2 Mounting the camera The camera can be mounted eith er from the top or from the bottom (1/4" 20 UNC thread). Figu re 5.3 Mounting a camera CAUTION! Do not expose the image sensors to direct sunlight. Do not o[...]

26 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.3 Ne twork (and po wer) connect or Figure 5.4 Ne twork connection – Connect the camera to a 10/100 Base-T network. – Use STP (Shielded Twisted Pair) Category 5e cable with RJ45 connectors. The camera network so[...]

DinionHD 720p IP Camera Installation | en 27 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.4 Po wer connect or Figu re 5.5 Powe r c on n ec ti on Connect power from a 24 VAC or 12 VDC class 2 power supply as follows: – Use AWG16 to 22 stranded wi re or AWG16 to 26 solid wire; cut back 5 mm (0.2 in) of [...]

28 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.5 Alarm and re lay connector Figure 5.6 Alarm and relay connect or pins Alarm Input – AWG 26-16 max.(0. 13-1.5 mm 2 ); cut back 5 mm (0.2 in ) of insulation. – Impedence: Internal pull-up 10 kOhm to +5 VDC. –[...]

DinionHD 720p IP Camera Installation | en 29 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.6 Audio connectors Figu re 5.7 Audio connectors Connect audio devices to the Audio In and Audio Out connectors. The unit has full-duplex mono audio. The two-way communication can be used to connect a speaker or doo[...]

30 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 5.7 MicroSD c ard Figure 5.8 Insert ing an microSD card 1. Unscrew the microSD card slot cover. 2. With the connection pads to the left, slide the microSD card into the slot until it locks in place. 3. Screw the cove[...]

DinionHD 720p IP Camera Installation | en 31 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.8 Data connector Figu re 5.9 Data connector pins The data connector is used to connect the control data coming out of the camera to external devices. RS485, RS422, an d RS232 is supported by this data connection. N[...]

32 en | Installation DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 2. Unlock the back focus locking button. 3. In a web browser, open the Len Wizard in the Camera/ Installer menu and select the wizard mode. (Default path: http//192.168.0.1/lenswizard.htm) 4. Adjust the focal length [...]

DinionHD 720p IP Camera Installation | en 33 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5.10 Reset but ton Figu re 5.10 Reset but ton With the power on, use a small po inted object to press and hold the reset button for more than 10 seconds to restore the factory defaults. This is useful to restore the [...]

34 en | Camera se t-up DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 6 Camera set-up The camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out via the network using a web browser. The camera has a set-up men[...]

DinionHD 720p IP Camer a Camera se t-up | en 35 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 6.2 Day/Night switching The camera is equipped with a motorized I R filter. The mechanical IR filter can be removed in low-light or IR illuminated applications by so ftware configuration settings. If Auto switchin[...]

36 en | Brow ser connection DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7 Bro wser connection A computer with Microsoft Intern et Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The camera is configured over the network us[...]

DinionHD 720p IP Camera Brow ser connection | en 37 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.2 Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default addr ess pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP a[...]

38 en | Brow ser connection DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 7.4 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application titl e bar displays three items: LIVEPAGE , RECORDINGS , SETTINGS . Note: The RECORDINGS link i[...]

DinionHD 720p IP Camera Brow ser connection | en 39 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 7.4.3 SETTINGS Click SETTINGS in the application title bar to configure the camera and the application interface. A new page containing the configuration menu is opened . All settings are stored in the camera [...]

40 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8B a s i c M o d e 8.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. To view the current settings: 1. If necessary, click the Basic Mode menu to expan[...]

DinionHD 720p IP Camer a Basic Mode | en 41 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.2 Device Access 8.2.1 Camera name Assign a name to assist in identification. This name simplifies the management of multiple devices in more extensive systems. The name is used for remote iden tification, for exampl[...]

42 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password is only saved after clicking Set . Therefore, click Set immediately after entering and confirming the password, [...]

DinionHD 720p IP Camer a Basic Mode | en 43 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 8.4 Net wo rk Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot. In this case, the Set button changes to Set and Reboot . 1. Make the desired changes. 2[...]

44 en | Basic Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 8.5 Encoder Select a profile for encoding the vide o signal. Pre-programmed profiles are available that give pr iority to different parameters. When a profile is selected, its details are displayed. 8.6 Audio Switch t[...]

DinionHD 720p IP Camer a Advanced Mode | en 45 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9 Advanced Mode 9.1 Advan ced Mode menu tre e The advanced mode configuration menu contains all camera parameters that can be configured. To view the current settings: 1. Click the Advanced Mode menu to expand it. [...]

46 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2 G eneral 9.2.1 Identification Camera ID Each device should be assigned a unique identifier that can be entered here as an addition al means of identification. Camera name Assign a name to assist in iden tif ic[...]

DinionHD 720p IP Camer a Advanced Mode | en 47 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays. Use the various authorization le vels to limit access. Proper pass[...]

48 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their intern al clocks. Fo[...]

DinionHD 720p IP Camer a Advanced Mode | en 49 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table. 7. Choose other values from the list boxes under the table, to change the sel[...]

50 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay. It can be displayed at the Top , at the Bottom , or a t a po[...]

DinionHD 720p IP Camer a Advanced Mode | en 51 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.3 W eb Interface 9.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements. If necess ary, replace the company's logo (top right) and the device nam[...]

52 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls. 1. Mark the check boxes for th[...]

DinionHD 720p IP Camer a Advanced Mode | en 53 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Show event log The event messages are displayed with the date and time in a field next to the video image. Uncheck the box to hide the event log on the Livepage . Show system log The system messages are displayed w[...]

54 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems File for system log Enter the path for saving the syst em log here. If necessary, click Browse to find a suitable folder.[...]

DinionHD 720p IP Camer a Advanced Mode | en 55 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4 Camera If the camera is in monochrome mode, all color-related menu items are disabled and cannot be accessed. 9.4.1 Mode Pre-defined modes The camera has six pre-programmed operating modes that can be selected [...]

56 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 4. Smart BLC Settings optimized to capture details in high contrast and extremely bright-dark conditions. 5. Low noise Enhancements are set to redu ce picture noise. Useful when conditionally refreshing IP storage[...]

DinionHD 720p IP Camer a Advanced Mode | en 57 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.2 ALC ALC level Adjust the video output level (-15 to 0 to +15). Select the range within which the ALC will operate. A positive value is more useful for low-ligh t conditions; a negative value is more useful fo[...]

58 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Actual shutter Displays the actual shutter va lue from the camera to help compare lighting levels and op timum shutter speed during set- up. Sensitivity up In AES mode, selects the factor by which the se nsitivity[...]

DinionHD 720p IP Camer a Advanced Mode | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.4 Day/night The Day/Night camera is equi pped with a motorized IR (infrared) filter. The IR filter can be removed in low-light or IR- illuminated applications. There are four differ ent methods of switching: ?[...]

60 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems IR contrast There are two modes for IR contrast: – Enhanced : the camera optimizes co ntrast in applications with high IR illumination leve ls. Select this mode for IR (730 to 940 nm) light sources and for scene[...]

DinionHD 720p IP Camer a Advanced Mode | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.5 Enhance Dynamic engine – Off: turns off a ll automatic scene detail and enhancements (only recommended for testing). – XF Dynamic : extra internal processing is enabled for low- light applications (traffi[...]

62 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.4.6 Color White balance – ATW : Auto tracking white balance allows the camera to continually adjust for optimal color reproduction. – AWB hold : Puts ATW on hold and saves th e color settings. –I n Manual [...]

DinionHD 720p IP Camer a Advanced Mode | en 63 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.7 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures). The camera simultaneously generates two H.264 video streams, an I-frame only str[...]

64 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab. Change the name of a prof ile and individual parameter values [...]

DinionHD 720p IP Camer a Advanced Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 advantageous with low bandwidths. The image rate in ips (images per second) is displayed n ext to the slider. Video resolution Select the desired resolution fo r the video image. The following resolutions are avail[...]

66 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image definition (focus). The value 9 represents maximum image [...]

DinionHD 720p IP Camer a Advanced Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.8 Encoder Streams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2. Select the codec algorithm for stream 2. The following are available: – Copy Stream 1 –[...]

68 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Note: The JPEG resolution follows the highest resolution setting of either stream 1 or stre am 2. The M-JPEG frame rate can vary depending on system loading. 9.4.9 Privacy Masks Four privacy mask areas can be defi[...]

DinionHD 720p IP Camer a Advanced Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.4.11 Installer Menu Synchronization Select the Synchronization method for the camera: – Line lock to lock to the power supply frequency; – Internal for free running camera operation. Ticker bar Switches a tic[...]

70 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Restore all defaults Click Restore all defaults to restore the fact ory defaults for the camera. A confirmation screen ap pears. Allow 5 seconds for the camera to optimize the pi cture after a mode reset.[...]

DinionHD 720p IP Camer a Advanced Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5 Recording Record the images from the camera to local storage media or to an appropriately configured iSCSI system. For long-term authoritative images use an ap propriately si zed iSCSI system. MicroSDHC cards a[...]

72 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems iSCSI Med ia If an iSCSI system is selected as the storage medium, a connection to the desi red iSCSI system is ne eded to set the configuration parameters. The storage system selected must be available on th e ne[...]

DinionHD 720p IP Camer a Advanced Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 available drives. The medi um is then added to the Managed storage media list. Newly added media is indicated in the Status column by the status Not active . 3. Click Set to activate all media in the Managed storag[...]

74 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Deactivating Storage Media Deactivate any storage medium from the Managed storage media list. It is then no lo nger used for recordings. 1. Click a stora ge medium in the Managed s torage media list to select it. [...]

DinionHD 720p IP Camer a Advanced Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.2 Recording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page. Modify the names of the recordin g profiles on the[...]

76 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording. Check the with encoding interval from profile: box an[...]

DinionHD 720p IP Camer a Advanced Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be record ed in the event of an alarm. Schedules ca[...]

78 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Profile name s To change the names of the recording profiles listed in the Time periods bo x: 1. Click a pro file. 2. Click Rename . 3. Enter the new name and click Rename again. Activate recording After completin[...]

DinionHD 720p IP Camer a Advanced Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6 Alarm 9.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address. The device can contact up to ten[...]

80 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems system such as the Bosch Video Client or the Bosch Video Management System. The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Numb[...]

DinionHD 720p IP Camer a Advanced Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 split image is set for this output on the receiver, select the decoder from Decoder in the receiver that is to be used to display the alarm image. Refe r to the destination device documentation concerning image dis[...]

82 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorith ms. Such changes can be due to movements in the camera's fie[...]

DinionHD 720p IP Camer a Advanced Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.3 VCA configuration- Profiles Configure two profiles with diff erent VCA configuration s. Save profiles on your computer's hard drive and load saved profiles from there. This can be useful if testing a num[...]

84 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering. Metadata is always created for a video content [...]

DinionHD 720p IP Camer a Advanced Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 environmental conditions to which the camera is subject. The sensor reacts to variations in th e brightness of the video image. The darker the observation area, th e higher the value that must be selected. Minimum [...]

86 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Tamper detection Detect tampering of cameras and video cables by means of various options. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended. Se[...]

DinionHD 720p IP Camer a Advanced Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Scene too bright Activate this function if tamperi ng associated with exposure to extreme light (for instance, s hining a flashlight directly on the objective) should trigger an al arm. The average brightness of th[...]

88 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems would not trigger an alarm, then an alarm is triggered immediately to indicate the inadequate reference image. Appearing edges Select this option if the select ed area of the reference image includes a largely hom[...]

DinionHD 720p IP Camer a Advanced Mode | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the video content analysis is to be active. Schedules can be defined for weekdays and [...]

90 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.[...]

DinionHD 720p IP Camer a Advanced Mode | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.5 VCA configuratio n - Event triggered This configuration allows you to stipulate that the video content analysis is only to be activated when triggered by an event. As long as no trigger is activated, the Sile[...]

92 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.6.6 Audio A larm Create alarms based on audio signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine nois e or ba ckground noise, are avoided. Set up normal audio tra[...]

DinionHD 720p IP Camer a Advanced Mode | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a video receiver. In this cas e, the camer[...]

94 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sen der, for example, the location of the device. Th[...]

DinionHD 720p IP Camer a Advanced Mode | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.6.8 Alarm Task Editor Editing scripts on this page ov erwrites all settings and entries on the other alarm pages. This procedure cannot be reversed. To edit this page, you should have programming knowledge and be[...]

96 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.7 Interfaces 9.7.1 Alarm input Configure the alarm triggers for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by closing the contact. Select N.O. (Normally Open) if the alar m is to [...]

DinionHD 720p IP Camer a Advanced Mode | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Select Select External device or Motion+/IVA to trigger the relay. Relay name The relay can be assigned a name he re. The name is shown on the button next to Trigger relay . The LIVEPAGE can also be configured to d[...]

98 en | Advance d Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8 Ne tw ork 9.8.1 Network Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the [...]

DinionHD 720p IP Camer a Advanced Mode | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Subnet mask Enter the appropriate subnet mask for the set IP address. Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway here.[...]

100 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems deactivates all unencrypted conne ctions allowing connections on the HTTPS port only. Configure and activate encryption for media data (video, audio, metadata) on the Encryption page. RCP+ port 1756 Activating RCP[...]

DinionHD 720p IP Camer a Advanced Mode | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 host name for the device on that site. Note: Information about the service , registration process and available host names can be found at DynDNS.org. Host name Enter the host name registered on DynDNS.org for the[...]

102 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot. In this case Set changes to Set and Reboot . 1. Make the desired changes. 2. C[...]

DinionHD 720p IP Camer a Advanced Mode | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 RTSP port If necessary, select a different port from the list for the exchange of the RTSP data. The standard RTSP port is 554. Select Off to deactivate the RTSP function. UPnP Select On to activate UPnP communica[...]

104 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems A special IP address (class D addr ess) must be configured f or multicast operation in a mult icast-enabled network. The network must support group IP addres ses and the Internet Group Management Protocol (IGMP V2[...]

DinionHD 720p IP Camer a Advanced Mode | en 105 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events. JPEG resolution corr esponds to the highest set[...]

106 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 9.8.5 Encryp tion If an encryption license is installed, this submenu gives access to the encryption parameters.[...]

DinionHD 720p IP Camer a Advanced Mode | en 107 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 9.9 Ser vice 9.9.1 Maintenance Firmware The camera functions and para meters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network. The firm[...]

108 en | Advanced Mode DinionHD 720p IP Camer a AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems The new firmware is unpacked and the Flash memory is reprogrammed. The time remain ing is shown by the message going to reset Reconnecting in ... seconds . When the upload is completed successfully, the de vice re[...]

DinionHD 720p IP Camer a Advanced Mode | en 109 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Once all files have been successf ully uploaded, the device must be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: 192.168.0.10/reset The new SSL certi[...]

110 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10 Operation via the brow ser 10.1 Liv epage After the connection is established, the Livepage is initially displayed. It shows the live video image on the right of the browser window. Depending on th [...]

DinionHD 720p IP Camera Operation via the bro wser | en 111 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.1.2 Image selection View the image on a full screen. – Click a tab below the video image to swi tch between the different display streams of the camera image. Display Stamping Various overlays in [...]

112 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.1.3 View Control If the data port is set-up to cont rol a PTZ device, a View Control tab is shown and activated. Use the controls to position the camera and to adjust zoom, focu s and iris. Six pre-[...]

DinionHD 720p IP Camera Operation via the bro wser | en 113 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 end of alarms are shown in the Ev ent Log field. These messages can be saved automatically in a file.To delete the entries, click the icon in the top right-hand corner of the relevant field. 10.1.6 Sav[...]

114 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 10.1.9 Audio communication Audio can be sent and received via the Livep age if the active monitor and the remote station of the camera support audio. 1. Press and hold the F12 key to send an audio sign[...]

DinionHD 720p IP Camera Operation via the bro wser | en 115 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 10.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page. The Recordings link is only visi ble if a direct iSCSI or microSD ca rd has been configured for r[...]

116 en | Operation via the brow ser DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems – If required, drag the green ar row to the point in time at which the playback should begin. – Red bars indicate the points in time where alarms were triggered. Drag the green arrow to navigate to[...]

DinionHD 720p IP Camera T roubleshooting | en 117 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 11 T roubleshooting 11.1 F unction te st The camera offers a variety of co n figuration options. Therefore, check that it works properly afte r installation and configuration. This is the o nly way to ensure t h[...]

118 en | T roubleshooting DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 11.2 Resolving problems The following table is intended to help identify the causes of malfunctions and correc t them where possible . Malfunction Possible causes Solution No image transmission to remote locatio[...]

DinionHD 720p IP Camera T roubleshooting | en 119 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 No audio transmission to remote station. Hardware fault. Check that all connected audio units are operating correctly. Faulty cable connections. Check all cables, plugs, contacts and connections. Incorrect confi[...]

120 en | T roubleshooting DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 11.3 Customer ser vice If a fault cannot be resolved, pl ease contact your supplier or system integrator, or go directly to Bosch Security Systems Customer Service. The version numbers of the internal processors[...]

DinionHD 720p IP Camera Maintenance | en 121 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 12 Maintenance 12.1 T esting the ne twork connection The ping command can be used to check the connection between two IP addresses. This allows testing whether a device is active in the network. 1. Open the DOS comma[...]

122 en | T echnical Data DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 13 T echnical Data 13.1 Specifications Type number NBN-921 Imager 1/3-inch CCD sensor Rated supply voltage 12 VDC, 550 mA (IVA: 6 50 mA) 24 VAC, 550 mA (IVA: 650 mA) PoE 48 VDC, 200 mA (IVA: 250 mA) Minimum illum[...]

DinionHD 720p IP Camer a T echnical Data | en 123 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Controls Via web browser or Configuration Manager Control feedback Actual shutter, Actual gain LAN interface STP, Ethernet 10/100 Base-T, auto-sensing, half/full duplex, RJ-45 Video encoding protocols H.264 (ISO[...]

124 en | T echnical Data DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems 13.1.1 Accessories Contact your Bosch representati ve for the latest available accessories. Dimensions (H x W L) without lens 58 x 66 x 122 mm (2.28 x 2.60 x 4.80 in) Weight without lens 542 g (1.195 lb) Operatin[...]

DinionHD 720p IP Camera Glossar y | en 125 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 Glossar y 0…9 10/100Base-TIEEE-802.3 specificati on for 10 or 100 Mbps Ethernet. 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks. Authentication is [...]

126 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems F FTP File Transfer Protocol: Used to transfe r files between computers on a network, such as the Internet. Full duplex Simultaneous data transmission in both directions (sending and receiving). G GBIC GigaBit Interfac[...]

DinionHD 720p IP Camera Glossar y | en 127 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 IEEE Institute of Electrical and Electronics Engineers: T he world's leading professional associati on for the advancement of technology. IGMP Internet Group Management Protocol: A communications protocol used to [...]

128 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems M MAC Media Access Control: A quas i-unique identifier attached to most network adapters (NICs). It is a number that acts like a name for a particular network adapter. MIB Management Information Base: a collection of i[...]

DinionHD 720p IP Camera Glossar y | en 12 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B013 | v1.52 | 2011.06 R RADIUS serverRemote Authentication Di al-In User Service: a client/server protocol for the authentication, authorization and accounting of users with dial-up connections on a computer network. RADIUS is the de-facto[...]

130 en | Glossar y DinionHD 720p IP Camera AR18-10-B013 | v1.52 | 2011.06 In stallation and Operation Manual Bosch Security Systems TLS Transport Layer Security: TLS 1.0 and 1.1 and the standard advanced developments of SSL 3.0 ( see SSL ). TTL Time-To-Live: life cycle of a data packet in station transfers. U UDP User Datagram Protocol: One of the [...]

[...]

Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2011[...]