Clifford 900-IQ manual

Owner' s Manua l World-Clas s Aut o Securit y T M intelliguar d 900-I Q[...]

Table of Contents Standard Features of the IntelliGuard 9OO- IQ . . . . . . . . . . . . . . . . 3 Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Built-in vehicle recovery/anti-carjacking circuitry . . . . . . . . . . . . . 9 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Your sec[...]

Table of Contents Remote controlled override of optional sensor #2 . . . . . . . . . . . . . . 17 Smart trunk release option . . . . . . . . . . . . . . . . . . . . . . . . . . 17 NightVision™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 How to interpret the LED status indicator . . . . . . . . . . . . . . . . . . . 18 A[...]

Standard Features of the IntelliGuard 9OO- IQ ✔ Lifetime Warranty —For as long as you own the vehicle, Clifford will repair or replace the control unit and remote controls free of charge. ✔ FA CT™—F alse A larm C ontrol and T est — One of many patented Clifford innovations, FA CT absolutely, positively puts an end to recurring false ala[...]

Standard Features of the IntelliGuard 9OO- IQ (cont.) ✔ NightVision™ Headlight Automation — You’ll never need to turn the headlights on or off ever again! IntelliGuard 900-IQ ’s built-in Night V ision circuitry takes care of illumination control in every lighting and weather condition, whether driving at dusk, dawn or in the rain. Safety [...]

Standard Features of the IntelliGuard 9OO- IQ (cont.) ✔ Dual-Mode “Chirp ” Silencing —Whenever you remotely arm or disarm, the siren “chirps” and the parking lights flash to confirm system status. Whenever you wish, you may silence the chirps with either of these two methods: Remote Controlled Chirp Muting — Just a press of remote con[...]

Standard Features of the IntelliGuard 9OO- IQ (cont.) ✔ Use r-Programmable MultiSound Medallion™ Siren — The IntelliGuard 900-IQ’s innovative MultiSound Medallion siren integrates creative form and engineering triumphs. Designed entirely by Clifford engineers, there ’s no other siren like it. The remarkable Clifford MultiSound Medallion S[...]

Standard Features of the IntelliGuard 9OO- IQ (cont.) ✔ Eight-Event TotalRecall™ —The IntelliGuard 900-IQ ’s memory stores the identity of the last eight triggers and/or sensors activated. This provides an invaluable diagnostic means, since, whenever you wish, the system will visually identify the activated triggers and sensors in reverse c[...]

Welcome to the world of high-technology vehicle security and convenience C ongratulations on the purchase of your IntelliGuard 900-IQ vehicle security/convenience system. Clifford Electronics has long been recognized as the world’s leading manufacturer of high-technology vehicle security systems and accessories. In fact, Clifford Electronics hold[...]

Built-in vehicle recovery/anti-carjacking circuitry IntelliGuard 900-IQ’s built-in BlackJax circuitry provides a safe and effective means of recovering your vehicle after a theft or carjacking. VERY IMPORTANT: The factory setting for the anti-carjacking feature is OF F . Once you are familiar with the following , we suggest you turn this feature [...]

IMPORTANT: What you MUST do to drive your car If you have the anti-carjacking feature turned on, until you set your own disarming code, you will use the factory-set code: the single digit “2.” To drive your car, do the following: 1. Start the engine, then press the brake pedal, then enter the factory-set code via the rocker switch mounted on th[...]

Enable/disable anti-carjacking You may enable or disable the anti-carjacking feature (see User-selectable features on pages 21-25) or temporarily override it via UltraSecure Coded Valet Mode (see page 15). What to do in a carjacking situation In a carjacking situation, the sooner you are out of the car the better. Don’t resist or take anything wi[...]

To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance, to transmit channel 3, press button 3. While you transmit, the LED indicator will blink once every second: this indicates level 1. To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts buttons 1-4 to level 2 (channels 5-8).[...]

TO ARM THE SYSTEM . . . . . . . Press button 1 (channel 1) once. You will hear two chirp s and the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM . . . . . . . Press button 1 (channel 1) again. One chirp and one parking light flash confirms disarming. In addit[...]

How to interpret the chirps and parking light flashes When you use the remote control, the system responds with chirps (unless the chirp muting feature is turned on) and parking light flashes. These chirp/flash acknowledgments mean: Chirps and flashes Meaning 1 Your system is disarmed or you have remotely exited valet mode (see page 16) 2 Your syst[...]

Optional starter interrupt With the addition of an optional relay, while the system is armed, the vehicle’s starter circuit is electronically disconnected. Our Fault-Proof design ensures that you’ll be able to start the engine even in the unlikely event of a system malfunction. Enhanced AutoArming™ If this feature is enabled and you forget to[...]

To enable valet mode 1. Turn the ignition switch to its “ON” position or start the engine. 2. Enter your secret disarming code (as noted on page 9) on the PlainView switch, then return the switch to its center position. 3. You now have 5 seconds to press latched position to enter valet mode. The system’s LED will glow continually for on-going[...]

Remote controlled sensor adjustments Due to ever-changing conditions, all alarms require periodic fine-tuning of their sensors. With other alarms, this requires repeated trips back to the dealer. Not so with IntelliGuard 900-IQ. You can adjust sensitivity electronically without tools and without even knowing where the sensor is mounted! If the sett[...]

NightVision™ All of the following NightVision Headlight Automation features are built into your IntelliGuard 900-IQ: User-selectable: You may turn the NightVision features on or off whenever you wish (see pages 21-25). When driving at dusk: The system automatically turns on the headlights. When driving at dawn: The system automatically turns off [...]

Smart AutoTesting™ Each time you remotely arm the system, it tests all triggers and sensors. If the hood or trunk is open when you remotely arm, the system will immediately alert you of the problem by sounding 4 chirps and 4 parking light flashes instead of the usual 2 and 2. If a door is ajar, you will receive the usual 2 chirps and flashes, the[...]

Smart prior intrusion attempt alert If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you enter the vehicle and turn on the ignition (or start the engine), the LED will blink 1-5 times, pause, then repeat the blink cycle 4 more times. Count the number of blinks in one cycle and [...]

User-selectable features Your IntelliGuard 900-IQ allows you to set many of its features to your own personal preferences. Although the system’s programming capabilities are very extensive, we have made the programming procedures very simple: to make a change, you just flick the PlainView switch a few times. Once you’ve changed a few settings, [...]

EXAMPLE 1: Turn off siren sound number 2: You can turn each of the siren’s six different sound patterns on and off as you wish to create you own custom sound (see the Personalized Siren Sounds section on page 20 for more information) To turn off “Sound 2” you’ll note that “Sound 2” is in column 1, row 2 of the Table (on pages 24-25). Th[...]

5. To exit the program mode, turn the ignition off . You’ll hear 3 chirps to confirm program mode exit. You just made three programming changes in only five steps. Easy, isn’t it? Notice again that in step 3 on the previous page you did not have to re-select column 1. If you don’t touch the switch, the system stays in the column for 10 second[...]

Table of user-selectable features: 1 chirp = OFF, two chirps = ON. Feature Select Column 1 1st latched Column 2 2nd latched Column 3 3rd latched Column 4 4th latched Column 5 5th latched Row 1 1st momentary Sound 1: on /off info on page 20 Add new remote to channel 1 info on page 12 NOTE 1 AutoLock on /off info on page 16 Enhanced AutoArming: on /o[...]