Davolink DVP-200 manual

DVP-100/200 IP P ho ne USER GUIDE[...]

DAVOLINK DVP-1 00/200 Conventi ons For product safety and correct operation, the following informa tion must be g i v e n t o t h e o p e r a t o r / u s e r a n d s h a l l b e r e a d b e f o r e t h e i n s t a l l ation and operation. This information may be set-off from the surrounding t e x t , b u t is always preceded by a bold title in capi[...]

Installation guide This p age intentionally lef t 4 / 54[...]

DAVOLINK DVP-1 00/200 Table of Contents 1 DVP-100/200 OVER VIEW ................................................................................ 7 1.1.CONT AIN ........................................................................................................ 7 1.2.INTRODUCTION ..................................................................[...]

Installation guide This p age intentionally lef t 6 / 54[...]

DAVOLINK DVP-1 00/200 1 DVP-100/200 Overview 1.1. Contai n z D V P V o I P P h o n e 1 e a z External power adapter 1ea z LAN Cable (RJ-45) 1ea z H a n d s e t 1 e a z H a n d s e t c o d e 1 e a z H e a d s e t ( o p t i o n a l ) 1 e a z U s e r g u i d e 1 e a You should check all belonging in the box. But Headset is optio nal element. 1.2. Intr[...]

Installation guide < Figu re 1 : DV P-100 > Button and Feature name of DVP-100/200. No Button and Feature Name Description 1 LCD screen z The to p l i n e d i s p la y s an y of the icons shown below, depending on the current state of the phone. z I t s h o w s t h e c u r r e n t c a l l s t a t u s , t h e c a l l e d n u m b e r a n d t h [...]

DAVOLINK DVP-1 00/200 4 ENTER z It applies the changed configuration after set up some function. 5 Left Index (  ) z It moves to the upper directory. 6 Up Index (  ) z It moves to the other directory. z It scrolls upward on the screen. 7 D o w n I n d e x (  ) z It moves to the other directory. z It scrolls downward on the screen. 8 Right [...]

Installation guide 1.4. Description ICON on LCD Screen DVP-100/200 Screen has 3 lines. The below described Icons are a ppeared at the first line. No ICON Description 1 z Show the Internet connectivity (Network) z It will be blinking if the connection is lost. 2 z Show the PC connectivity (Local) z It will be disappeared if there is no connection. 3[...]

DAVOLINK DVP-1 00/200 2 Connecting and Installation 2.1. Cabl ing Refer to the locate ports on the rear of the DVP-100/200. It sh ould be connected to the correspondi ng Network or Interface. ① LAN port : PC connection or Hub for Local Network. ② WAN port : Connect to the c ooperate IP Telephony network ③ Headset port : Connect Headset (optio[...]

Installation guide To access configuration mode, push the “PROG” button at the fir st time. 2.2.2 WAN IP Add ress Allo cation 1) DHCP Setting Choose DHCP mode for WAN IP configuration, when DVP-100/200 is connected t o the enabled Auto-Co nnection ADSL modem or Cable mo dem. ① To access to the configuration mode, push the “PROG” button. ?[...]

DAVOLINK DVP-1 00/200 “2*Manual”, then select “1*IPAddress”. ④ put the IP address. Instruction “ * ” button rep resented “ . ” (dot). If the IP address is not correct, delete using the “ MUTE ” button. ⑤ Netmask and Gateway setting are the same like IP address sett ing. ⑦ After completing the IP con figuration, push the ?[...]

Installation guide 3) PPPoE Setting If your ADSL modem needs to set PPPoE account on DVP-100/200, choose PPPoE for WAN IP configuration. Instruction Y ou need correct user name and password gets from your ISP . ① Select “3*PPPoE”. ② Select “1*PPPoE User” for PPPoE account. Instruction Y ou can change the input mode using “  ” or [...]

DAVOLINK DVP-1 00/200 NOTE At the normal case, you don’t ne ed the PPPoE ser vice name. ⑤ Push the “  ” button to save the changed setting. 2.2.3 NAT fun ction and L AN IP conf iguration DVP-100/200 support NAT function for L ocal PC. For NAT function , you need to set up LAN IP address and DHCP function like below. ① Follow the same s[...]

Installation guide ② Select “1*LANIPAddress” by pushing the “ENTER” or “  ” button to configure LAN IP address. NOTE T he default LAN IP address is 192 .168.1.254 ③ T o e n a b l e D H C P S e r v e r f u n c t i o n , s e l e c t “ 1 * Y e s ” a f t e r s e l e c t i n g “2*DHCP Server”. NOTE The defa ult DHCP mode is en[...]

DAVOLINK DVP-1 00/200 2.3. VoIP Configuration 2.3.1 H.323 Setup (1) RAS setting DVP-100/200 has to be registered to ITSP (Internet Telephony Se rvice Provider) to use VOIP service. CAUTION DVP-100/200 c an not allow du al image simultaneously . Before applying soft ware im age, please check out what VOIP protocol is used at your ITSP NOTE It shows [...]

Installation guide ③ S e l e c t G K I n t e r f a c e m o d e a m o n g “ 1 * G K I n f . M o d e ” , “ 2 * M a n u a l G K Used” and “3*Auto GK Used” after moving to “1*GK Inf. Mode” ④ Select one of GK interface mode and configure its collaborating setup. Instruction Manual method – Use UDP port 1718. Endpoint attempts to re[...]

DAVOLINK DVP-1 00/200 ⑥ DVP-100/200 sends a registration request message to Gatekeepe r with H.323 ID. Select the “3*H.323-ID” and put correct H.323ID. Instruction You can change the inpu t mode using “  ” or “  ” button. ⑦ DVP-100/200 sends RRQ message periodically t o Gatekeeper base d on below RRQ Timer setting. There are t[...]

Installation guide ⑩ It is the timeout va lue of Q.931 message. NOTE The default Q.931 respo nse ti meout value is 20 secon ds ⑪ DVP-100/200 pays attention to the TTL value supplied by Gatek eeper in t h e R C F m e s s a g e . I f t h e R C F m e s s a g e d o e s n o t i n c l u d e T T L v a l u e , i t follows RAS TTL value. (2) Protocol Se[...]

DAVOLINK DVP-1 00/200 NOTE The default Q.931 call co ntrol port is TCP 1720. This port initiates the Q.931 call c ontrol messages for the pur pose of connecting, maintaining, and di sconnecting calls. ③ Choose “2*Fast Connect” mode whether “1*Yes” or “2*No”. T h e f a c t o r y d e f a u l t v a l u e i s “ Y E S ” . NOTE Th e Fa [...]

Installation guide ⑧ DVP-100/200 can handle the received Alert message using ”7*No n- Fast Alert” menu. Discard Alert message if the message doesn’t include audio information. The basic value is “2*NO”. ⑨ Set CanMap Alias function on DVP-100/200 at the ”8*CanMapAlia s” menu. The default value is “2*NO”. ⑩ Select whether use [...]

DAVOLINK DVP-1 00/200 ① G o t o c o n f i g u r a t i o n m o d e u s i n g t h e “ P R O G ” b u t t o n . R e a c h t o t h e “ConfigVoIP” menu like above RAS setting. Enter at “2*ConfigVoI P” to access “3*RTP Config” menu. ② DVP-100/200 can set Frame numbe r at one packet per ordinary i nterval. CAUTION If the value is too bi[...]

Installation guide W e n e e d t h e D o o r b e l l s e r v e r a n d t h e P r o x y s e r v e r t o p r o v i d e t h e V o I P service on a private netwo rk, like the above figure ③ P u s h t h e “ E N T E R ” b u t t o n o r “  ” t o s e t t h e D o o r B e l l I P a d d r e s s . I t supports maximum 3 Door Bell IP addresses. ④[...]

DAVOLINK DVP-1 00/200 (5) Miscellaneous Setting This menu is optional part. So just leave away this part if you don’t have any more information. ① Go to “5*Miscellaneous” like above P-Server setting. ② Put the VOIP service provider name at the “1*VoIPSrvProvide” menu if it is needed for call. ③ “2*RouterLinkChk” menu is only for[...]

Installation guide 2.3.2 SIP Setup (1) SIP Proxy Server Setting ① T o s e t u p V o I P s e r v i c e w i t h S I P p r o t o c o l , a c c e s s “ 2 * S e t t i n g s ” followed b y p u s h i n g “ P R O G ” b u t t o n . G o t o “ 2 * C o n f i g V o I P ” t o a c c e s s S I P s e rver setting. ② Choose Server mode at “1*Server[...]

DAVOLINK DVP-1 00/200 ④ P o r t n u m b e r o f t h e S I P p r o x y s e r v e r . T h i s i s t h e p o r t o n w h i c h the S IP client will listen for me ssages. The default is 5060. ⑤ A registrar is a server that a ccepts REGISTER requests. A reg istrar is t y p i c a l l y c o - l o c a t e d w i t h a p r o x y o r r e d i r e c t s e r[...]

Installation guide ② Select “1*SIP” or “2*TEL” mode at “1*URLMode”. ③ Set the Caller ID number at “2*DisplayName”. ④ Put the telephone numb er at “3*PhoneNumber”. ⑤ The domain providing service to a SIP user. Set the domain na me at “4*ServiceDomain”. Push “ENTER” button to apply the domain name . Instruction You[...]

DAVOLINK DVP-1 00/200 (3) Authentication Setup ① Go to the “2*ConfigVoIP” menu like above URL setup. And selec t “3*Authentication” to put user i nformation for authentication. ② Put the user name for authentication at “1*AuthUserId”. ③ Put the correct user password fo r authentication at “2*AuthPa ssword”. ④ It is very impo[...]

Installation guide 2.4. Initialization 2.4.1 Restart This chapter explains how to re set the DVP-100/200 at LCD scree n menu. The Phone has to be reset to a pply changed configuration. ① Access to the “6*Reset” menu using “  ” followed by pushing “PROG” button. ② Choose “1*Yes” or “2*No” at “1*Phone” menu. 2.4.2 Resto[...]

DAVOLINK DVP-1 00/200 2.5. Call History This Phone saves called nu mber and caller number. ① Select “3*CallLogs” at the ma i n m e n u t o s e e c a l l h i s t o r y . T h e re are three call history directory; M issed call, Incoming call and Ou tgoing call. ② Choose “1*MissedCalls” menu by pushing the “ENTER” button to check the M[...]

Installation guide 2.6. Phone Book Phonebook saves telephone number with name by index number. DVP - 100/200 can save the list up to 200. ① Get to “4*Phone Book” at the main menu. ② Reach to submenu of Phone book using “  ” button. You can find out a l i s t b y S p e e d o r N a m e o r N u m b e r . W h e n y o u a d d l i s t , y [...]

DAVOLINK DVP-1 00/200 2.8. Bell type and Volume control You can select Bell type and volume at “6*Ring/Volume”. Increas e or decreases volume for the hands et, headset or speakerphone. ① Get to “6*Ring/Volume” menu to control Bell type and volume. ② Go to “1*RingType” to select B ell type. It supports 3 Bell ty pes. ③ Go to “2*R[...]

Installation guide ⑥ Go to “5*SpeakerVolume” to adjust the speaker volume. ⑦ Go to “6*MicVolume” to adjust the Mic volume. ⑧ Go to “7*HeadsetEarVo1” to a djust the headset ear volume. ⑨ Go to “8*HeadsetMic” to adju st the headset Mic volume. 34 / 54[...]

DAVOLINK DVP-1 00/200 3 WEB Management 3.1 PC Connect ion After installing system properly, you should have to assigne IP address on the connected PC between 192.168.1.1 and 192.168.1.253 to a c cess the DVP-100/200 using Web browser. In next paragragh, it descri bes h o w t o c o n f i g u r e d y n a m i c I P w h e n D H C P s e r v e r f u n c [...]

Installation guide 2. Click right button of mouse on “L ocal Area Connection”. And the n click on “Properties” button. 3. Select “Internet protocol (TCP/I P)” and click on “Properties” b utton. 36 / 54[...]

DAVOLINK DVP-1 00/200 4. Select “IP address automatically and “DNS address automatically ” in internet protocol attribute window. If you want to get a dynamic IP address from DVP-100/200, Click t h e “obtain an IP address automatically. Otherwise you should selec t the “ U s e t h e f o l l o w i n g I P a d d r e s s w h e n y o u w a n [...]

Installation guide NOTE Windows XP and 2000 do not need to restart PC for reloading the n e w I P a d d r e s s O t h e r W i n d o w s O S h a v e t o r e s t a r t f o r a c t i v a t i o n t h e changes. 6 . O p e n “ C O M M A N D P R O M P T ” w i n d o w a n d E x e c u t e “ i p c o n f i g ” command to make sure that your PC is assi[...]

DAVOLINK DVP-1 00/200 3.1.2 Access to Web Man agement server Before accessing Web Manager, verify the state of the DVP-100/2 00 LAN Icon on LCD is appeared properly. 1. Open a new Web browser window and enter the DV-100/200’s IP address of LAN interface (PC port). Enter “http://192.168.1.254 ” for the URL port number 8000. At this point, the [...]

Installation guide 3.1.3 Configuration on the WEB L i k e t h e f o l l o w i n g s c r e e n , h a r d w a r e v e r s i o n a n d s o f t w a r e v e r s i o n are displayed. NOTE Build date and time could be dif ferent from each other although the same software version. And the password of “root” account can be changed o n the below screen. [...]

DAVOLINK DVP-1 00/200 2. IP Setting Current IP address, IP mode and Hardware address will show up a t this menu like below picture. You can also change all configuration related IP address such as IP address, IP mode. Static IP : If a dedicated IP address is allocated for IP Phone, select the static IP mode for WAN IP. Then put IP address, subnet a[...]

Installation guide Dynamic IP ( DHCP) : I f t h e I P a l l o c a t i o n m o d e i s d y n a m i c f o r W A N , select DHCP. Then push WAN IP Se tting button to apply configura tion. Dynamic IP (PPPoE) : I f the DVP-100/200 is connected to DSL modem which is not terminate PPPoE co nnection, select ADSL (PPPoE) mo de for WAN IP allocation. Then pu[...]

DAVOLINK DVP-1 00/200 3. VOIP Setting To use VOIP Telephony service configures related information su ch as Ga tek eep er a ddr ess , H. 323 ID, Tel num ber and so o n. T he par ame t ers is the same as above LCD setting. But this WEB setting can set up all VOIP setting at one time. The below picture shows the H.323 r elated parameters for VOIP. &l[...]

Installation guide H.323 ID : It is a H.3 23 Identification for authen tication. Area code : Local Number. Phone number : E.164 number which is recognized at Gatek eeper. Virtual Calling Number : E . 16 4 i s a n al i as a d dr e s s w i th i n a H .3 2 3 Ne t wo r k to address the dest ination terminal. Virtual E.164 represents c aller ID when it [...]

DAVOLINK DVP-1 00/200 DoorBell address : I t i s t h e I P a d d r e s s o f D o o r B e l l t o i n f o r m t h e I P address of P-Server to P-Client (DVP-100/200) It supports 3 Dorebell address to give reliability. Voice Packet : Voice Packets can only choose one among three ways like Both Rx/Tx, only Rx or None . 5. Speed Dial Setting Put the te[...]

Installation guide 6. DHCP Server Setting DVP-100/200 has DHCP server function for local network. You can p u t the IP pool range using by setting start IP address and maximum C l i e n t number. W h e n D H C P s e r v e r i s e n a b l e d , t h e A l l o c a t e d I P a d d r e s s t a b l e s h o ws the current Client and its IP addr ess with M[...]

DAVOLINK DVP-1 00/200 7. Port Forwarding Port Forwarding allows you to dire ct incoming traffic from W AN side (identified by Protocol and External port) to the Internal server with private IP address on the LAN side. The Internal por t is required only if the external port needs to be converted to a differ ent port number used by the server on the[...]

Installation guide 8. System Status Below picture shows the current LAN and WAN I P address and registration status of VoIP. Network Port I P : I t s h o w s c u r r e n t W A N I P a d d r e s s . N e v e r m i n d e v e n though the net mask is 0.0.0.0 PC Port IP : I t s h o w s t h e c u r r e n t L A N P o r t I P a d d r e s s a n d s u b n e [...]

DAVOLINK DVP-1 00/200 check the Line status and I nternet connectivity. 9. Restart The DVP-100/200 will be restart as soon as push the Restart but ton. To apply new configuration or to restart IP Phone click the but ton. 49 /54[...]

Installation guide 10. Upgrade A t t h e b e l o w U p g r a d e m e n u , y o u c a n u p g r a d e s o f t w a r e a n d s e t u p the log server. DVP-100/200 can upgrade new s/w image auto matically and manuall y. Auto upgrade needs the S erver IP address. Below procedure explains the manual software upgrade. Before upgrade s/w image, DVP-100/20[...]

DAVOLINK DVP-1 00/200 1) Download the software from FTP server to PC. 2) Open the Dos command. 3) Change the prompt directory to the other directory which has t h e software image. 4) Execute the batch command on the Dos prompt. Example) C:₩ upgrade.bat 192.168. 1.254 5) The Dos window would show FTP process if the F TP session is opened successf[...]

Installation guide This p age intentionally lef t 52 / 54[...]

DAVOLINK DVP-1 00/200 53 /54[...]

Installation guide IP Phone D VP-100/200 User Manual © 2005 DAVOLINK Co., Inc. All rights reserved. Information in this document is proprietary to DA V OLINK Co., Inc No information contained here may be copied, translated, transcribed or duplicated by any form without the prior written consent of DA VOLINK. Information in this document is subject[...]