-
Página 1
B B R R - - 6 6 6 6 4 4 1 1 4 4 W W A A N N + + 1 1 L L A A N N L L o o a a d d B B a a l l a a n n c c e e r r R R o o u u t t e e r r User Manual[...]
-
Página 2
BR-6641 Us er Manual 1 T able of Content s Chapter1 Qu ick St art .................................................................................................... 4 1.1 Prep aration ............................................................................................................... 4 1.2 Access to t he Web-base d UI .................[...]
-
Página 3
BR-6641 Us er Manual 2 4.4 QoS ....................................................................................................................... .. 62 4.5 Per IP Ma x Connection ........................................................................................... 66 4.6 Per IP Max Rate Cont rol ..........................................[...]
-
Página 4
BR-6641 Us er Manual 3 Copyright © by Edimax T echnology Co, L TD. all right s reserved. No part of this publication may be reproduced, transm itted, transcribed, stored i n a retrieval system, or translated into any langua ge or computer language, in any form or by any means, electronic, mechanical, magnetic,optical, chemi cal, manual or otherwis[...]
-
Página 5
BR-6641 Us er Manual 4 Chapter1 Quick Start At the first time using the product of BR-6641, you may confronted with complicated settings whi ch prevent s you from start ing well. This chapter wil l explain the basic functiona lities of BR-6 641 and h ow to operate and configure th e system.It will also cover related subject s in network struct ures[...]
-
Página 6
BR-6641 Us er Manual 5 help you complete the setup of BR-6641 p arameters. BR-6641 uses a web-based man agement user interface (W eb-base d UI). Due to internal design co nstraints, you have to u se MS Internet Explorer 6.0 (IE 6.0), or higher to access the W eb-based UI. A screen resolution of 800x600 or higher is recom mended. Use a cross[...]
-
Página 7
BR-6641 Us er Manual 6 1.2 Access to the W eb-based UI The Web-based UI enable s you to easily per form every configuration task. Follow the steps below to acce ss the Web-ba sed UI. 1. Connect your PC Ethernet LAN interface to LAN port of BR-6641 with a cross-over cable. The default management LAN port of BR-6641 i s LAN port. 2. After powering on[...]
-
Página 8
BR-6641 Us er Manual 7 Cancel the Proxy Setting[...]
-
Página 9
BR-6641 Us er Manual 8 1.3 BR-6641 Web-based UI Overview After logging in, you will be able to st art configuring or monitoring BR-6641 through the Web -based UI. In order to help you to familiar with the basic operations, the expla nations are as follows: The Web -based UI ta sks are grouped into four categories. The categori es are located at the[...]
-
Página 10
BR-6641 Us er Manual 9 second: 9600, Dat a bits: 8, Parity: None, S top bits: 8, Flow control: None. The serial console and Web-b ased UI use the sa me username and passwo rd pai rs. By default, the password of “Administrato r” is 12 34, and the password of “Monitor” is 5678. If the password is changed via t he Web-based U I, it will also b[...]
-
Página 11
BR-6641 Us er Manual 10 1.4 How to use BR-6641 Web-based UI This section describes the operatio ns a nd arrangement of W eb Based UI, figure 1-2 displays the operating menu of BR-6641 Web -based UI system. BR-6641 Web Based UI Operating Menu Items 1.4.1 BR-6641 Operating Menu The task bar of operating menu cont ains five categories, whi ch are Syst[...]
-
Página 12
BR-6641 Us er Manual 11 Click this button to recover the old settings which apply has saved. Click the Help button to display the on-line help of the current page, the on-line hel p information will automatically swap when you change the function page or language. Click Hide Help to hide the on-line help information. Table 5.0 Buttons Note: Th e Ap[...]
-
Página 13
BR-6641 Us er Manual 12 Write a note for the current rule . Table 5.1 Operating Rules When you add a new rule, the newly added rule will be placed right below the current rule. Moving the rule up or down will swap positions betwee n the upper and lower rules. Checkbox It is quite common that you see the following checkboxes in some tables. The se c[...]
-
Página 14
BR-6641 Us er Manual 13 Chapter 2 System In this chapter , you will learn how to c onfigure system settings. System settings are the fundament al configurations of the BR- 6641 system. They have to be spe cific in order for the system to work properly . Ex amples are provided here to help you to fulfill the configuration. Figure 3.1 The Location of[...]
-
Página 15
BR-6641 Us er Manual 14 2.1 Summary [Summary] is in the submenu of [System], which helps the Administrato r to know the system information. While logging in the Web UI, System/Summary is the first page you see when you log into BR-6641’ s web-based UI. [Summary] provide the following information: System Information Category Field Description V er[...]
-
Página 16
BR-6641 Us er Manual 15 W AN Link St ate The section on W A N Link S tate shows the current st atus of each and every W AN link. Each W AN link is represented as a color-coded block with the following color coding scheme to indicate its status. The allowed numbe r of W AN Link i s also show n here . y Green: Active W AN link. y Red: Brok en W AN li[...]
-
Página 17
BR-6641 Us er Manual 16 2.2 T raffic S t atistics Figure 3.2 The Location of “System/ Traffic S tatistics” on the Menu Bar In the traffic st atistics pa ge, you can insp ect real-time traf fic information sorted by traffic class o ver each W AN link. The statistics of traffic classes in the t able is adjusted accordingly by your selection of tr[...]
-
Página 18
BR-6641 Us er Manual 17 2.3 Diagnostic T ools System Traffic Statistics Summary Diagnostic Tools Administration Date & Time Network Service Log Figure 3.3 The Location of “System/Diagnostic T ools” on the Menu Bar ARP Enforcement: ARP Enforce ment updates ARP tables of servers and network devices around BR-6641. When the Enforce button is p[...]
-
Página 19
BR-6641 Us er Manual 18 Push T est button to begin the test. The result of the test is one of the following: Everything is ok. BR-6641 discovers that a machine in DMZ conflict s with Network Setting on BR-6641. For example, a public IP address sho uld be in W AN but is use d by a machine in DMZ. An error message with the conflicting IP addr[...]
-
Página 20
BR-6641 Us er Manual 19 refer other materials. Y ou may specify a target device in the T ar get IP field. It accepts either an IP address or a host name. Y ou may specify a target device in the T ar get IP field. It accepts either an IP address or FQDN. Select a network interfac e, W AN or LAN. If it is W AN, select W AN link number in Ind ex field[...]
-
Página 21
BR-6641 Us er Manual 20 2.4 Date&T ime System Traffic Statistics Summary Diagnostic Tools Administration Date & Time Network Service Log Figure 3.4 The Location of “System/Date/Time” on the Menu Bar 2.4.1 Date&T ime Setting In this page, you can set up time related configurations. For time zone information, Y ou should pi ck the reg[...]
-
Página 22
BR-6641 Us er Manual 21 2.4.2 Busyhour Setting Busyhour Setting is very important from a MIS manager’s point of view. It provide s a tool for you to define two time segm ents: busy-hour and idle-hou r. All other rule-based services such as bandwidth managemen t and auto-routing can take advantage of this function. For exampl e, you can define 9:0[...]
-
Página 23
BR-6641 Us er Manual 22 2.5 Administration Figure 3.5 The Location of “System/Administration” on the Me nu Bar In this page, you ca n do a few administrative t asks. First, you can ch ange the password of Administrator and Monito r accounts. Every BR-6641 comes with the same passwords initially . T o avoid any securi ty risks, it is absolutely [...]
-
Página 24
BR-6641 Us er Manual 23 Y ou can reset BR-6641 to i ts factory default st ate. In doi ng this, you will lose your entire customized configuration. Finally , you can reboot BR-664 1. Due to web interface limitations. There will not be any messages after you h ave rebooted the sy stem. W ait two minutes or so and try to re-connect to BR-6641 using th[...]
-
Página 25
BR-6641 Us er Manual 24 Log on to Web UI as the Administrator and go to function [System] → [Administration]. Use [Browse...] to select the path to t he new firmware image, then select [Upload]. The firmware update will t ake a while so be patient. During the u pdate process B E SURE not to turn of f the system or pull the po wer plug. Y ou shoul[...]
-
Página 26
BR-6641 Us er Manual 25 Chapter3 Network Figure 3.1 The Location of “Network” on the Menu Bar[...]
-
Página 27
BR-6641 Us er Manual 26 3.1 W AN Setting Figure 3.2 System / Network Setting [W AN Setting] is quite important p art for BR-6641 . The relavent parameter is defined here. The configuration is done one W AN link at a time. However , you can apply all the changes at once at the end. Y ou can se lect a W AN link by selecting the link number in a W AN [...]
-
Página 28
BR-6641 Us er Manual 27 After connect ing the W AN Link to the machine, W AN No. need to be defined in [Basic Setting]. W AN is to be dif ferent for dif ferent type of W AN. BR-6641 p rovide the following choices: S tandard DHCP PPPoE PPTP Advanced Figure 3.3 WAN Setting / Basic Setting[...]
-
Página 29
BR-6641 Us er Manual 28 3.1.1 S t andard Mode Basic Setting: Figure 3.4 S tandard Mode / Basic Setting When you select S tandard Mode as the W A N T ype, you need to fill the paramete rs as in the Basic Setting tabl e.[...]
-
Página 30
BR-6641 Us er Manual 29 Basic Setting: Field V alue Description Down S tream The down stream (inbound) bandwidth of the W AN link, for example 25600 (Kbps). Up S tream The up stream (outbound) bandwidth of the W AN link, for example 25600 (Kbps). Port S peed Auto 10Mbps/Half duplex 10Mbps/Full duplex 100Mbps/Half duplex 100Mbps/Full duplex The spee[...]
-
Página 31
BR-6641 Us er Manual 30 Health Detection pa ge, the following parameters are available: Figure 3.5 WAN Link Health Detection Field Description Never BR-6641 assumes a healthy W AN and stop monitoring ICMP and TCP packet s. Always BR-6641 will always do the health detection according to the rules. Only when no packet is received If BR-6641 detects n[...]
-
Página 32
BR-6641 Us er Manual 31 3.1.2 DHCP Mode This model is enabled when BR-6641 is a client using DHCP to acquire a dynamic IP addre ss from an ISP's DHCP se rver . Figure 3.6 DHCP Mode / Basic Setting Field V alue Description Down S tream The down stream (inbound) bandwidth of the W AN link, for example 25600 (Kbps). Up S tream The up stream (outb[...]
-
Página 33
BR-6641 Us er Manual 32 100Mbps/Full duplex Health Detection Never Always Only wh en no packet is received This function is used to configure the W AN link health detection mechanism for the specific W AN link. Please refer to Chapter 3.2.1 W AN Link Health Detection. Clone MAC Normally DHCP will assign IP dynamically . S tatic IP , however , can b[...]
-
Página 34
BR-6641 Us er Manual 33 3.1.3 PPPoE Mode PPPoE is a very popular bridging mode protoc ol for ADSL. Y ou need to specify the ADSL account information to obtain IPs f rom the ISP PPPoE server . Figure 3.7 PPPoE Mode / Basic Setting Field V alue Description Down S tream The down stream (inbound) bandwidth of the W AN link, for example 25600 (Kbps). Up[...]
-
Página 35
BR-6641 Us er Manual 34 10Mbps/Half duplex 10Mbps/Full duplex 100Mbps/Half duplex 100Mbps/Full duplex set it manually or system can got it automatically . Health Detection Never Always Only wh en no packet is received This function is used to configure the W AN link health detection mechanism for the specific W AN link. Please refer to Chapter 3.2.[...]
-
Página 36
BR-6641 Us er Manual 35 3.1.4 PPTP Mode This model is enabled when BR-6641 i s access to PPTP server via Internet. Figure 3.8 PPTP Mode / Basic Setting Field V alue Description Down S tream The down stream (inbound) bandwidth of the W AN link, for example 25600 (Kbps). Up S tream The up stream (outbound) bandwidth of the W AN link, for example 2560[...]
-
Página 37
BR-6641 Us er Manual 36 Port S peed Auto 10Mbps/Half duplex 10Mbps/Full duplex 100Mbps/Half duplex 100Mbps/Full duplex The speed and duplex of WAN Port. Y ou can set it manually or system can got it automatically . Health Detection Never Always Only wh en no packet is received This function is used to configure the W AN link health detection mechan[...]
-
Página 38
BR-6641 Us er Manual 37 3.1.5 Advanced Mode Advanced mode is used where BR-6641 is c onnecte d with a router via its private IP and it s actual public IP deployed in DMZ. Figure 3.9 Advanced Model / Basic Setting[...]
-
Página 39
BR-6641 Us er Manual 38 Field V alue Description Down S tream The down stream (inbound) bandwidth of the W AN link, for example 25600 (Kbps). Up S tream The up stream (outbound) bandwidth of the W AN link, for example 25600 (Kbps). Port S peed Auto 10Mbps/Half duplex 10Mbps/Full duplex 100Mbps/Half duplex 100Mbps/Full duplex The speed and duplex of[...]
-
Página 40
BR-6641 Us er Manual 39 3.2 LAN Setting Figure 3.10 Network/LAN Setting Basic Subnet The table of Basic Subnet allows you to specify one or more priv ate subnet s that connect to BR-6641 dire ctly . Figure 3.11 LAN Setting / Basic Subnet[...]
-
Página 41
BR-6641 Us er Manual 40 Input the IP Address of LA N Port in [Basic Subnet] - [IP Address] and input the corresponding subnet mask in [Netmask]. Select the correspon ding Speed/Duple x in [Port-Speed]. RIP Configuration BR-6641 support RIP (Routing Information Protocol s) for both version 1 and 2. RIP v1 is the basic definition while v2 has some fu[...]
-
Página 42
BR-6641 Us er Manual 41 Note: DMZ is virtual area, which is in the port wi th LAN. DMZ support the public IP Address. T he public IP support only one IP range, which do not support multi-IP range Routing. Example: Figure 3.13 LAN Private Subnet / S tatic Routing Subnet Figure 3.14 LAN Private Subnet / S tatic Routing Subnet Setting[...]
-
Página 43
BR-6641 Us er Manual 42 3.3 DHCP Setting Figure 3.15 Network / DHCP Setting Click on “Enable DHCP” to enable this functi on. BR-6641 is a client using DHCP t o acquire a dynamic IP ad dress from an ISP’ s DHCP server . The following is an example of how you set it up.[...]
-
Página 44
BR-6641 Us er Manual 43 Figure 3.16 DHCP Setting[...]
-
Página 45
BR-6641 Us er Manual 44 Field Description Lease T ime Input the Lease T ime by hour . Default Gateway Input the Default Gateway . The Client will take this address as Gateway when DHCP is enabled. Note: This address should be in the subnet with LAN’s Subnet Netmask Input the IP Address of DNS. The Client will take this address as DNS Server when [...]
-
Página 46
BR-6641 Us er Manual 45 3.4 Host Names Figure 3.17 Network / DHCP Setting This function is to define th e the name for system, specific IP and IP group. These defined names will ap pear in sub-me nu of source and destination in Fire wall, Multihoming, etc. System Name: Field Description Name Input the host name of the BR-6641. Domain Input the doma[...]
-
Página 47
BR-6641 Us er Manual 46 Named IP Addresses: Field Description Name Input the name which is to be substitute for the IP address. Address S pecify the IP Ad dress. It can be: IP Address IP Range T able 3.9 System Name[...]
-
Página 48
BR-6641 Us er Manual 47 3.5 Service Names Figure 3.18 Network / Service Names This function is to configure the name, pr otocol and other p arameters of servi ce. (BR-6641 has a default list of comm only used services.) The se defined names will appear in sub-menu of service in Firewall , Multihoming, etc.. Service List: Field V alue Description Na[...]
-
Página 49
BR-6641 Us er Manual 48 ICMP: The service used ICMP , e.g. Ping. TCP: The service used TCP , e.g. FTP . UDP: The service used UDP . Parameter Number T ype From…T o S pecify the parameter for dif ferent Protocols. Number: Input Protocol Number . T ype: Input the service type of ICMP . From..T o: Input the Port Number of TCP/UDP . Single Port Numbe[...]
-
Página 50
BR-6641 Us er Manual 49 3.6 IP Grouping BR-6641 of fers a variety of services. Thes e services will be discussed in the next chapter . In order to help IT manager configure service s efficiently , BR-6641 provides a few management tools. IP Grouping is one of them. This function allows you to assign a name to a group of IP addresses. Late r on when[...]
-
Página 51
BR-6641 Us er Manual 50 IP Grouping: Feild Description Group Name Input the name of the group, then it will appear in the service menu and the relevant options. Note: Y ou can set at most 5 groups. T able 3.1 1 IP Grouping Rules Setting: Field V alue Description IP address <IP address> Input IP address - One single IP address, or an IP addres[...]
-
Página 52
BR-6641 Us er Manual 51 3.7 Service Grouping This function allows you to assign a name to a group o f TCP ports, UDP ports, and/or ICMP. Later on when you are asked to spec ify a port, you can use the name of the service group instead. The name of a service group wil l automatically show up in the port selection list if the service group is enable [...]
-
Página 53
BR-6641 Us er Manual 52 UDP@ service menu. The format is port (xxx) for single Port and port (xxx-yyy) for a range of port, e.g. 6891-6900. Group belong to not belong to Define if the the Port IP Address in former Field belongs to the group. T able 3.13 Service Grouping For example, you can set up a service group called “MSN File Tra nsfer”. It[...]
-
Página 54
BR-6641 Us er Manual 53 Chapter 4 Service After having set up your network environment in the previous chapter , we will now look into the services provided by BR-6641. These services can help y ou manage your n etwork more ef ficiently and effectively . In figure 4.1, you can see a list of functi ons BR-6641 is cap able of. These servi ces play an[...]
-
Página 55
BR-6641 Us er Manual 54 4.1 Firewall [Summary] is in the submenu of [System], which helps the Administrator to know the system information. While logging in the W eb UI, System/Summary is the first pag e you see when you log into BR-6641’ s web-based UI. [Summary] provide the following information: Figure 4.2 The Location of “Service/Firewall?[...]
-
Página 56
BR-6641 Us er Manual 55 Source Any address LAN WA N Localhost IP Address IP Range Subnet <Named IP addresses> < IP Grouping > Packets sent from the specified source will be matched: Any Address: Ma tch all packet s regardless of its source. LAN: Match all packet s that come from the LAN. W AN: Match all packet s that come from the W AN.[...]
-
Página 57
BR-6641 Us er Manual 56 < Service Grouping Name> Group: The packets from the group which are predefined in [Service Grouping]. Any: All packets are to be matched. Note: The default value by BR-6641 is to neglect all the packet s. Action Accept Deny Accept: The firewall will let the matched p ackets p ass through. Deny: The firewall will drop [...]
-
Página 58
BR-6641 Us er Manual 57 4.2 Auto Routing Auto Routing service allows administrators to speci fy how traf fic is routed to W AN links. If you have only one W AN link, default config uration is ok. If you have multiple W AN links, you may like to setup your routing rules in m any situations. For example, an administrator can rese rve a W AN link to a[...]
-
Página 59
BR-6641 Us er Manual 58 Source Any address LAN Local host IP Address IP Range Subnet <Named IP addresses> < IP Grouping > Packets sent from the specified source will be matched: Any Address: Ma tch all packet s regardless of its source. LAN: Match all packet s that come from the LAN. Localhost: Match all packet s that come from BR-6641 [...]
-
Página 60
BR-6641 Us er Manual 59 UDP@ < Service Grouping Name> Any service types (e.g. FTP), or you can choose the po rt number in TCP/UDP packet. T o specify a range of port numbers, type starting port number plus hyphen “-“and en ding port number . e.g. “TCP@123-234”. Group: The packets from the group which are predefined in [Service Groupin[...]
-
Página 61
BR-6641 Us er Manual 60 4.3 V irtual Server Virtual Serve r is a feature to make your intranet (LAN) servers available to the Internet (W AN). Be cause the private IP add resses assigned to th e intranet servers are invisible to the external environment. If you wish to m ake these services (provided on the servers) acce ssible to out si ders, you m[...]
-
Página 62
BR-6641 Us er Manual 61 Virtual Server : Field V alue Description When Busy Idle All-T ime There are three options available: Bus y hour , idle hour , and All-times. Please refer to Chapter 2 [System] → [ Date/Time] for setting up the definition of busy or idle hours. W AN IP <W AN IP> T o the users from the Internet, your virtual server is[...]
-
Página 63
BR-6641 Us er Manual 62 4.4 QoS BR-6641 provides QoS to wards both inbound and outbound traf fic. It can ensure certain services whi ch are allocated enough ban dwidth to provide satisfa ctory quality . Because of the burst nature of voice/video/data traf fic, sometimes the amount of traffic excee ds the speed of a link. This function is to manage [...]
-
Página 64
BR-6641 Us er Manual 63 Y ou can configure your own bandwid th limit for each W AN link in Inbound Band width Settings and Outbound Settings by collap se or exp and them.. Figure 4.6 The Screenshot of Classes Classes: Field Description Name <Input name> The name for this bandwidth class. We recommend you using a self-explanatory name so that [...]
-
Página 65
BR-6641 Us er Manual 64 connections on the W AN link. Normally , we will set up maximum bandwidth for servic es like WWW or SMT P that have a high volume of traffic and may af fect the quality of other services. Guarantee d Kbps The guaranteed bandwidth for this class: This makes sure the connections through the WAN link will be at least allocated [...]
-
Página 66
BR-6641 Us er Manual 65 IP Range Subnet <Named IP addresses> < IP Grouping > the list as well. Please See [System] → [IP Grouping] for setting up your own IP groups. Service FTP(21) SSH (22) TELNET(23) SMTP(25) POP3(1 10) H323 (1720) Protocol Number ICMP@ TCP@ UDP@ <Service Grouping Name> Any The services, which are predefined i[...]
-
Página 67
BR-6641 Us er Manual 66 4.5 Per IP Max Connection Figure 4.7 The Location of “Service / Per IP Max Connection” on the Menu Bar This function is used to protect network against malicious att acks caused by virus or hackers. When the number of conne ctions exceeds the pre set value, BR-6641 will block the rest of connections and write the event t[...]
-
Página 68
BR-6641 Us er Manual 67 Log Interval <in seconds> The time interval used for system to write the event to the log file. Source <IP Address> Connections estab lished from the specified source will be matched, including Any Address, LAN, WAN, IP Address, IP Range, Subnet, and IP Group. Limit <value> The maximum number of th e connec[...]
-
Página 69
BR-6641 Us er Manual 68 4.6 Per IP Max Rate Control Figure 4.9 The Location of “Service / Per IP Ma x Rate Control” on the Menu Bar This function is use d to set the maximum bandwi dth a ssigned to inbound and outbound traf fic per IP in order to prev ent network congestion from non-bu siness application bandwid th consumption. Figure 4.10 The [...]
-
Página 70
BR-6641 Us er Manual 69 Field V alue Description IP <IP Address> The IP where the packets come from will be matched, including LAN, IP Address, IP Range, IP Subnet, and specified IP Group. Inbound (Kbps) <value> Maximum bandwidth assigned to inbound traffic per IP . Outbound (Kbps) <value> Maximum bandwidth assigned to outbound tr[...]
-
Página 71
BR-6641 Us er Manual 70 4.7 Multihoming Figure 4.1 1 The Location of “Serv ice / Multihoming” on the Menu Bar BR-6641’ s auto-ro uting service is a trunking technol ogy that provides load balan cing and fault tolerance for all outbound request s. But it does not apply to inbound request s. Based on a unique technology called Swif tDNS TM , BR[...]
-
Página 72
BR-6641 Us er Manual 71 are still reachable via other live W AN links. In order to let your Multihoming function properly , you must make sure that the requirement s listed below are met. Prerequisites for Multihoming: Multiple W AN links (at least two). Registered domain names for your publicly acce ssible servers. Y our publicly accessible se rve[...]
-
Página 73
BR-6641 Us er Manual 72 Global Setting: Field V alue Description TTL <TTL> Set DNS query response time. IP Address <IP Address> Enter the reverse lookup IP address. Host Name <Link Number> Enter the corresponding F QDN to the reverse IP . T able 4.8 The Description of the Fiel ds in Multihoming Global Setting Domain Setting In[...]
-
Página 74
BR-6641 Us er Manual 73 Figure 4.12 Domain Setting Domain Setting: Field Description Domain Name Enter the domain names for Multihoming. T o ente r additional domain names, press +. TTL Assign DNS query response time. Responsible Mail Enter the domain administrator ’s email. Primary Name Server Enter the primary server name. Source IP The query I[...]
-
Página 75
BR-6641 Us er Manual 74 Policy T ype The algorithm for selecting WAN links, by Wight or by T raf fic. By Weight: Answer DNS queries by the weight given to each link. By T otal T raf fic: Answer DNS queries by selecting the WAN link with the lightest total traf fic. Parameter-IP Enter the IP address to answer DNS queries. Parameter-Weight Input the [...]
-
Página 76
BR-6641 Us er Manual 75 4.8 Internal DNS Figure 4.13 The Location of “Service / Internal DNS” on the Men u Bar BR-6641 has a built-in DNS server function which can be activate d by completing the fields in this page. Global Settings: Field V alue Enable InternalDNS Turn on/of f internal DNS server . PTR Record TTL Set DNS query response time. I[...]
-
Página 77
BR-6641 Us er Manual 76 Domain Settings: Field Description Domain Name Enter the domain names for internal DNS. T o enter additional domain names, press +. TTL Assign DNS query response time. Responsible Mail Enter the domain administrator ’s email. Primary Name Server Enter the primary server name. IP Address The query IP address can be an IP ad[...]
-
Página 78
BR-6641 Us er Manual 77 4.9 SNMP Figure 4.14 The Location of “Service /SNMP” on the Menu Bar SNMP (Simpl e Network Management Protoc ol ) can be used to manage net works by providing stat istical data regarding network perfo rmance and se curity . It is often used in the management of TCP/IP networks. SNMP Settings: Field Description Enable SNM[...]
-
Página 79
BR-6641 Us er Manual 78 4.10 UPnP Figure 4.15 The Location of “Service / UPnP” on the Menu Bar BR-6641 will detect the public UPnP (Universal Plug and Play) equipment in the network and automatically respon d to it s predefined IP Address. Field V alue Description Enable UPnP Enable Disable Enable or disable the function. W AN IP <IP Address[...]
-
Página 80
BR-6641 Us er Manual 79 Chapter 5 Log In this Chapter , you can control BR-6641’ s logging activities with repect to va rious functionalities such as the System, Firewa ll, Routing, etc. Administrator can also either set up the log transmission method s to another server for purpose of archiving and further analyses, or control the ev ent notific[...]
-
Página 81
BR-6641 Us er Manual 80 5.1 V iew In the ‘View’ Sub-menu, BR-6641 provides two types of comprehensive log re cords (see the tab le below). Administrator can pick the desired log type and the corresponding event s for that type will be shown in the windows below . Press the ‘refresh’ button to get a cop y of the latest log. For log data push[...]
-
Página 82
BR-6641 Us er Manual 81 5.2 Control With this sub-menu, you can set up how log data will b e transmitted to other servers (out of BR-6641) for archiving and further analy ses. T ransmi ssion methods includ e FTP , Email and Syslog. Each log type can hav e its own transmi ssion method sett ing. Figure 5.3 Location of Log/Control Page o n the Menu Ba[...]
-
Página 83
BR-6641 Us er Manual 82 Method BR-6641 of fers three types of log transm issions: FTP out to an external FTP server , Syslog out to a syslog server o r send emails via SMTP to the administrator ’ s mailbox. E-mail Field V alue Description SMTP Server <IP> or <Domain Name> SMTP server for the logs. Account <SMTP Account> Auth[...]
-
Página 84
BR-6641 Us er Manual 83 FTP Field V alue Description Server <IP> or <Domain Name> FTP Server ’s IP or domain name. Account <FTP Account> FTP user account. Password <Account’s Password> FTP user password. Path <Path> FTP server path. Auto Push Push this button to start log pushing automatically . Scheduled Push [...]
-
Página 85
BR-6641 Us er Manual 84 5.3 Notification In this sub-menu, you can set up ho w email notifications are sent out for import ant system event s. The setup is similar to pr evious section’ s email account settings. Figure 5.4 Location of Log/Notification Page on the Menu Ba r Notification Field V alue Description SNMP Email Select how Email noti[...]
-
Página 86
BR-6641 Us er Manual 85 Link Fail Enable this function, system will notify administrator when a Link Fail happened. Admin Password Change Enable this function, system will notify administrator when Administrator password is changed. Table 5.6 The Description of the Fields on Log/Notification[...]