Fujitsu Siemens Computers 4312 FA manual

4312 FA 4312 FA 4312 FA 4312 FA LCD-Bildschirm / Moniteur / Monitor / Skärm / Beeldscherm / Billedskærm BETRIEBSANLEITUNG BETRIEBSANLEITUNG BETRIEBSANLEITUNG BETRIEBSANLEITUNG OPERATING MANUAL OPERATING MANUAL OPERATING MANUAL OPERATING MANUAL[...]

S26361-K841-V150-1-5E19 English Contents Introduction................................................................................................................... ..................... 1 Notational conventions .......................................................................................................... .... 2 Important notes ....[...]

[...]

S26361-K841-V150-1-5E19 English - 1 Introduction Your new LCD (Liquid Crystal Display) monitor 4312 FA offers numerous features and functions, for example: • TFT display (Thin Film Transistor; active matrix) • minimal space requirements thanks to slim housing • height adjustment and ability to turn (portrait mode) • optimum ergonomic charac[...]

Colour monitor 4312 FA 2 - English S26361-K841-V150-1-5E19 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with this symbol. Failure to observe this warning endangers your life, destroys the device, or may lead to loss of data. i Supplementary information, re[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 3 • Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in the chapter "Connecting the monitor". • No data transmission cable should be connected or disconnected during a thunderstorm. • Please ensure that no[...]

Colour monitor 4312 FA 4 - English S26361-K841-V150-1-5E19 Manufacturer’s notes Energy Star The Fujitsu Siemens LCD colour monitor 4312 FA is designed to conserve electricity by dropping to less than 5 W when it goes into standby, suspend and OFF mode. With this new power management the 4312 FA qualifies for the U.S. Environmental Protection Agen[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 5 Important note on power cable To guarantee safe operation, use the cable supplied. Use the following guidelines if it is necessary to replace the original cable set. • The female/male receptacles of the cord set must meet CEE-22 requirements. • The cable has to be HAR-certified or VDE-c[...]

Colour monitor 4312 FA 6 - English S26361-K841-V150-1-5E19 Disposal and recycling This device has been manufactured to the highest possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition th[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 7 Installing an ergonomic video workstation Before you set up your equipment, you should select a suitable position for working at the monitor. Please observe the following advises when installing a video workstation. Window edge of desk permissible reaching secto r 600 mm permissible reachin[...]

Colour monitor 4312 FA 8 - English S26361-K841-V150-1-5E19 Height adjustment and ability to turn 3 2 1 You can conveniently adjust the height of your monitor by first removing the transport lock (1) and then slightly lifting the display (2). In addition, you can also turn the display by 90 ° into the vertical position (portrait mode). To do this y[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 9 Connecting the monitor See your system unit's operating manual for details of the connectors and interfaces on the system unit. ! Please note the information provided in the "Safety" section in the chapter " Important notes" at the beginning of this manual. Do not c[...]

Colour monitor 4312 FA 10 - English S26361-K841-V150-1-5E19 i If your system unit has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is usually active. Ê Plug the power adapter cable into the power connector (3) of the monitor. Ensure that it snaps firmly in pla[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 11 Switching the monitor on/off The ON/OFF switch (2) is used for switching the monitor on and off. The power indicator (1) glows green when the monitor and system unit are switched on. The power indicator glows green and flashes when the monitor does not receive any video signal or is in the[...]

Colour monitor 4312 FA 12 - English S26361-K841-V150-1-5E19 Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings with the floppy disk supplied If one of the operating sy[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 13 Carry out auto-adjustment of the monitor for the current resolution With the AUTO button you can start the auto-adjustment for the current resolution. During the auto- adjustment the display Auto adjustment is shown. During auto-adjustment the functions Fine , Coarse and Position are carri[...]

Colour monitor 4312 FA 14 - English S26361-K841-V150-1-5E19 Depending on the function (in this case Contrast ), additional adjustment functions are offered. Bright C olors 0 Dark Colors 0 i K Ê Press the MENU button to select from the displayed adjustment possibilities (in this case Bright Colors and Dark Colors ). Ê Use the - or + button to make[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 15 Adjusting the vertical position Calling the Position setting window Shifting the picture down Shifting the picture up Activating the factory settings Factory settings are available for Image Lock, picture position and colours in the preset operating modes (see table in the chapter "Te[...]

Colour monitor 4312 FA 16 - English S26361-K841-V150-1-5E19 Switching full-screen mode on or off Calling the Image Size setting window (activate with MENU button). If your graphic card is only capable of displaying a resolution lower than 1280 x 1024, the scaling process of the monitor can extend the addressability to 1280 x 1024 pixels by determin[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 17 Locking menu items of OSD menu All menu items of the OSD menu except brightness and contrast can be locked to prevent accidental or unauthorised changes to the monitor settings. Ê Press the MENU button of the control panel for at least 5 seconds until the OSD menu disappears. Locked menu [...]

Colour monitor 4312 FA 18 - English S26361-K841-V150-1-5E19 Technical data Dimensions and weight (LCD monitor) Visible diagonals: 43 cm Dot pitch: 0,264 mm Screen size: 338 ñ 3 mm x 270 ñ 3m m Maximal resolution: 1280 x 1024 pixels Dimensions ( WxHxD ) : Monitor incl. Monitor base: Box: 414 mm x 457 mm x 206,9 mm 507 mm x 270 mm x 532 mm Weight: [...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 19 VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the PC. If your computer is equipped with a VESA-DDC-[...]

Colour monitor 4312 FA 20 - English S26361-K841-V150-1-5E19 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 no pin 2 Video input green 10 Sync. ground 3 Video input blue 11 Ground 4 Ground 12 DDC-Data 5 DDC ground 13 H. sync 6 Red video ground 14 V. sync 7 Green video ground 15 DDC Clock 8 Blue video ground Trouble s[...]

Colour monitor 4312 FA S26361-K841-V150-1-5E19 English - 21 No display (power indicator lights) Ê Check whether the system unit is switched on. Ê Check whether the data cable for the monitor is correctly attached to the monitor and the monitor port on the system unit. Ê Press any key on the PC keyboard - the PC may be in energy saving mode. Ê A[...]

TCO'99 - 1 TCO'99 Congratulations You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.[...]

TCO'99 2 - TCO'99 Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'9 9 approved and labelle[...]