Godex GS220 manual

Configuration Guide GS220[...]

i T able of Contents Introduction Bar Code Configur ation Me thods .............................................................. 1–1 Single-Code Method .............................................................................. 1–1 Multi-Code Method ................................................................................ 1–1 Need [...]

ii Scanner Op eration Configuration Mode Options ..................................................................... . 6– 1 Scan Buffers ............................................................................................. . 6– 1 Redundant Scans ..................................................................................... . 6?[...]

iii RS232 Parity Feat ure s ........................................................................................ . 9–1 Baud Rate ................................................................................................ . 9– 1 Da ta/St op Bits .......................................................................................... .[...]

vi[...]

1– 1 Introduction Y our new scan ner has been f ac tory c on figur ed with a se t of de f aul t parameters. Since many host syst ems ha ve un i que for m ats and proto c ol r eq uirements, GoDEX prov ide s a wi de ra nge of co nfigu r ab l e features that may be selected using this bar c ode bas ed conf i gu r ati on tool. Once the confi g urati [...]

1–2 Need To Start O ve r? Scan the Recall Defaults bar code to era se all prev i ous sett i ngs and return the scanner to its factory default co mmu ni ca ti on pr otocol. Ke yb oa rd W e dg e interface sc ann ers wi ll load keyb oa rd wed ge defa u lts. All other sca n ners l oad RS2 32 def ault s. Recall Defaults ³ 9 999 9 8[...]

2–1 Code T ypes and Decode Rules Bar code descriptions marked with an aster i sk ( * ) define a feature that is a factory default. Bar codes marked with a tilde ( ~ ) require the Multi-Code configuration method. UPC/EAN ³ 10 0116 * Enable UPC/EAN ³ 10 0106 Disable UPC/EAN ³ 10 0216 * Enable UPC-A ³ 10 0206 Disable UPC-A ³ 10 0210 * Enable UP[...]

2–2 Code 128 ³ 10 0113 * Enable Code 128 ³ 10 0103 Disable Code 128 ³ 10 0314 Enable UCC/EAN-128 ‘]C1’ Code Formatting – For Coupon Code 128, see page 3 –3. ³ 10 0304 * Disable UCC/ EAN-128 ‘]C1’ Code Formatting ³ 10 0711 Ignore <FNC4> Code 128 Characters ³ 10 0701 * Use <FNC4> to Determine Extended ASCII Characters [...]

2–3 ³ 10 0215 Enable PARAF (Italian Pharmaceutical Codes) Support – Code 39 bar codes are converted to PARAF format. ³ 10 0205 * Disable PARAF Support ³ 10 0307 * Allow PARAF Codes Only ³ 10 0317 Allow Non-PARAF Codes ³ 10 0312 Enable TRI-OPTIC Code ³ 10 0302 * Disable TRI-OPTIC Code ³ 10 0702 * Use Standard Code 39 Framing ³ 10 0712 Tr[...]

2–4 ³ 11 5413 Enable Alternate Code 39 R eference Comparison Check – assists with element s that are below the 2 to 1 (wide to narrow) elem ent width requirement. ³ 11 5403 * Normal Code 39 Ref erence Comparison Check 2 OF 5 C ODES ³ 10 0115 * Enable Interleaved 2 of 5 (ITF) ³ 10 0105 Disable Interleaved 2 of 5 (ITF) ³ 10 0310 Enable MOD 1[...]

2–5 ³ 10 0913 Alternative ITF first Bar Reference ³ 10 0903 * Normal ITF first Bar Reference ³ 10 0110 Enable Standard 2 of 5 ³ 10 0100 * Disable Standard 2 of 5 ³ 90 1500 ~ Standard 2 of 5 Sy mbol Length – To specify the number of characters to be decoded, scan this bar code and the appropriate code byte sequence located on p age 1 2 –1[...]

2–6 ³ 10 0316 Enable Hong Kong 2 of 5 ³ 10 0306 * Disable Hong Kong 2 of 5 ³ 11 5411 Enable Follett ITF ³ 11 5401 * Disable Follett ITF Codabar ³ 10 0114 * Enable Codabar ³ 10 0104 Disable Codabar ³ 10 0012 Enable Dual Field Codabar ³ 10 0002 * Disable Dual Field Coda bar Code 93 ³ 10 0112 * Enable Code 93 ³ 10 0102 Disable Code 93 Code[...]

2–7 ³ 10 0003 * Disable Co de 11 ³ 10 8005 * Check fo r 1 Code 11 Check Digit ³ 10 8015 Check for 2 Code 11 Check Digits ³ 10 8004 * Do No t Check for 2 Code 11 Check Digits ³ 10 8014 Check for 2 Code 11 Check Digits if Code Length is Great er Than 10 Char acters Telepen ³ 10 0017 Enable Telepen ³ 10 0007 * Disable Telepen ³ 10 0016 Enabl[...]

2–8 ³ 20 0734 Enable MSI Plessey MOD 10/10 Check Dig it – Test MSI Plessey bar codes for a 2 digit Modulo 10 check digit. ³ 20 0724 * Enable MSI Plessey MOD 10 Check Digit – Test MSI Plessey bar codes for a 1 digit Modulo 10 check digit. ³ 10 0117 Enable UK Plessey ³ 10 0107 * Disable UK Plessey ³ 10 0716 Enabled UK Plessey A to X Conver[...]

2–9 ³ 90 1800 ~ Minimum Symbol Length – Single-line default is 3. Combine this code with the proper code bytes (on page 1 2 –1), to specify the minimum num ber of characters in all non-UPC/EAN bar codes. ³ 90 1900 ~ Symbol Length Lock – Combine this code with the proper code bytes, to lock the bar code’s length into place. ³ 11 9417 En[...]

2–10 ³ 90 2200 ~ Code Length Lock #2 ³ 90 2300 ~ Code Type Lock #2 ³ 90 2400 ~ Code Length Lock #3 ³ 90 2500 ~ Code Type Lock #3 ³ 90 2600 ~ Code Length Lock #4 ³ 90 2700 ~ Code Type Lock #4 ³ 90 2800 ~ Code Length Lock #5 ³ 90 2900 ~ Code Type Lock #5 ³ 90 3000 ~ Code Length Lock #6 ³ 90 3100 ~ Code Type Lock #6 ³ 90 3200 ~ Code Lengt[...]

3–1 Supplements ³ 10 1217 Enable Two Digit S upplements ³ 10 1207 * Disable Two Digit Suppleme nts ³ 10 1212 * Enable Two Digit Re dundancies – The scanner will scan the bar code plus the 2 digit add on twice before acceptin g data. ³ 10 1202 Disable Two Digit Redunda ncies ³ 10 1216 Enable Five Digit S upplements ³ 10 1206 * Disable Five[...]

3–2 ³ 10 1417 Enable Bookland (978) Supp lement Required ³ 10 1407 * Disable Bookland (978) Supplement Required ³ 10 1314 Enable 977 (2 Digit) Supplement Requ ired – The scanner will require a 2 di git supplement to be scanned when an EAN-13 code beg ins with 977. ³ 10 1304 * Disable 977 (2 Digit) Supp lement Required ³ 10 1313 Enable 378/[...]

3–3 ³ 10 1000 * Enab le 2 Digit Supplements with 37x, 43x, or UPC # System 5 ³ 10 1010 Disable 2 Digit Supplements with 37x, 43x, o r UPC # System 5 ³ 10 1001 * Enab le 5 Digit Supplements with 37x, 43x, or UPC # System 5 ³ 10 1011 Disable 5 Digit Supplements with 37x, 43x, o r UPC # System 5 ³ 10 0315 Enable Coupon Cod e 128 ³ 10 0305 * Di[...]

3–4 ³ 10 1214 Enable Code ID’s with Supplements ³ 10 1204 * Disable Code ID’s with Supplements ³ 11 8406 * Beep Once on Supple ments ³ 11 8416 Beep Twice on Supp lements ³ 10 1315 Enable ISBN Check Digit Transmissio n – Not available with all models. ³ 10 1305 Disable ISBN Check Digit Transmission ³ 10 1317 Enable Bookland to ISBN Co[...]

3–5 ³ 12 50 1 7 N o S up p leme nt Ch ecki ng if EAN- 13 C od e is just sca nn ed ³ 12 50 0 7 * Normal Suppl eme nt Checking[...]

3–6[...]

4–1 GS1 Databar GoDEX ’s GS220 scanners with software #14810 and higher can be configured to scan GS1 Databar t ype bar codes. ³ 100011 Double Border Required – Due to the large spaces commonly found in G S1 Databar symbologies, GoDEX recommends dou ble border requirements be enab led when scanning GS1 Databar code type symbologies. ³ 10 04[...]

4–2 GS1 Databar Limited ³ 10 0414 Enable GS1 Databar Limited ³ 10 0404 * Disable GS1 Databar Limited ³ 11 4903 * Transmit GS1 Databar Limited CD ³ 11 4913 Do Not Transmit GS1 Databar Limited C D ³ 11 4904 * Transmit GS1 Data bar Limited Application ID – Application identifier “01” is transmitted by default. ³ 11 4914 Do Not Transmit G[...]

5–1 ISBT Code 128 Implementation Configuration Mode ³ 13 8417 Enable ISBT Code 128 ³ 13 8407 Disable ISBT Code 128 The bar codes belo w enable or disable a special transmit m ode as outlined in section 3.5.2 of the ISBT-128 Specific ation. This output method al lows the user to confirm independently the accuracy of the Code- 128 check digit. ³[...]

5–2 Concatenation Configuration Mode The following bar codes are used to confi gure variable time requireme nts used to find the second bar code of the ISBT concatenation se quence. ³ 30 1310 100 msec to Find Concaten ation Sequence ³ 30 1320 200 msec to Find Concaten ation Sequence ³ 30 1330 300 msec to Find Concaten ation Sequence ³ 30 1340[...]

5–3 ³ 43 8490 Donation Identifica tion Number + Donor Identification Number =á + &; Concatenation ³ 4384100 Donation Identifica tion Number + Confidential Unit Exclusion Status =á + &! Concatenation ³ 4384110 Product Code + Expiration Date (Form 1) =< + =>Co ncatenation ³ 4384120 Product Code + Expiration Date (Form 2) =< +[...]

5–4 The following example demo nstrates how to configure the User-Defined IS BT identifiers: Assume the left-hand identifiers are the ISBT defined donation identification number: “=G”; and the right hand identifiers are country specific identifiers “&a”. 1. Scan the ENTER/EXIT c onfiguration mode bar code. 2. Scan the 1 st Left Identi[...]

6 6 –1 Scanner Operation Configuration Mode Options ³ 11 8117 Allow Configuration Mode o n Power Up – the scanner can only enter Configuration mode before any bar codes are scanned. ³ 11 8107 * Allow Configuration Mode Anytime – Allow the configuration at any time. ³ 11 8116 Allow configuration Code s on Power Up – Once a product bar cod[...]

6 –2 Redundant Scans ³ 30 1100 * 0 Redundant Scans – Requires 1 good decode for a good scan . ³ 30 1110 1 Redundant Scan – Requires 2 consecutive decodes of the same bar code data for a good scan . ³ 30 1120 2 Redundant Scans – Requires 3 consec utive decodes of the same bar code data for a good scan . ³ 30 1130 3 Redundant Scans – Re[...]

6 –3 LED Options ³ 11 83 1 3 Fl as h G ree n L ED if Resca n Allowed – This indi cat es sam e sy mb ol t ime ou t has elap s ed . ³ 11 83 0 3 Do Not Flash Green LED if Rescan Allowed ³ 11 83 1 2 Reverse LED Functions – Red = Laser On Green = Good Re ad ³ 11 83 0 2 * Normal LED Functions – Green = Laser On Red = Good R ea d[...]

6 –4 Beeper Options ³ 31 8575 * Normal Tone ³ 31 8565 Optional Tone 1 ³ 31 8555 Optional Tone 2 ³ 31 8545 Optional Tone 3 ³ 31 8535 Optional Tone 4 ³ 31 8525 Optional Tone 5 ³ 31 8515 Optional Tone 6 ³ 31 8505 No Beep ³ 11 8406 * Beep Once on Supple ments ³ 11 8416 Beep Twice on Supp lements ³ 11 8414 Enable Fast Beep ³ 11 8404 * Disa[...]

6 –5 ³ 11 8417 Beep on BEL Command – The scanner beeps when it receives a BEL character from the host. If a number is sent within 200 msecs before the BEL character, the scanner will beep that number of times. ³ 11 8407 * Ignore BEL Command ³ 11 6913 Enable Light Pen Tog gle During Beep – The scanner beeps and toggl es the light pen data l[...]

6 –6 Data Transmission Delays Use these codes to select the amount of dela y between sending data characters from the scanner to the host. This helps prevent the scanner from overflowing host-input buffers. ³ 81 8810 * 1 msec Intercharacter Delay ³ 8188100 10 msec Intercharacter Dela y ³ 8188250 25 msec Intercharacter Dela y ³ 91 8800 ~ V ari[...]

6 –7 Communication Time O ut Options ³ 11 8412 Enable Communications Ti me Out ³ 11 8402 * Disable Communications Time Out ³ 11 8413 * Beep Before Transmit ³ 11 8403 Beep After Transmit ³ 91 9100 ~ Variable Communications Time Out ³ 8191400 * Default Communications Time Out (2 secs) ³ 8191200 Short Communications Time Out (1 secs) ³ 81918[...]

6 –8 Host Scanner Commands ³ 11 8015 Enable D/E Disable Command – The scanner will disable scanning after it receives an ASCII “D” from the host device. It will enable scanning when it receives an ASCII “E”. ³ 11 8005 * Disable D/E Disable. ³ 11 8211 Enable Z/R Type D/E Simula tion – The scanner will disable scanning after it recei[...]

6 –9 ³ 11 5916 Transmit Scanner ID byte w ith receipt of an “i” (69H) via RS232 – The ID byte is transmitt ed as 3 bytes (i.e. 0, 0, 1). ³ 11 5906 * Don’t Transmit Scanner ID byte w ith receipt of an “i” (69H) via RS232 ³ 11 8111 Transmit NO READ if DC2 Activated ³ 11 8101 * Do Not Transmit NO READ if DC2 Activated ³ 11 8311 No G[...]

6 –10 ³ 14 1715 Use Protocol Prefix and Suffix for Bar Code Transmission ³ 14 1705 * No Protocol Prefix a nd Suffix for Bar Code Transmission ³ 11 9917 Enable RTS on No Read – After a NOREAD occurs, the scanner will activate the RT S line for 20 milliseconds. The duration of the RTS activation can be loaded in address 1 99 bits 6–0 in 10 m[...]

77 7 –1 Prefixes/Suf fixes Scan the Enter Configuration Mode b ar co de before trying to set these fea tures (see the Multi-Code Method on page 1–1). User Configurable Prefixes, All Data ³ 90 3500 ~ Configurable Prefix Char acter #1 – A prefix ID can be added and assig ned for data transmission. Use this code with a code byte sequence, on pa[...]

7 –2 User Configurable ID Characters, Code Specific ³ 10 5507 * Use Configurable Code ID Bytes as Prefixes – User configured, code specific ID bytes are transmitted before the data. If using prefixes, user configured suffixes can not be used. ³ 10 5517 Use Configurable Cod e ID Bytes as Suffixes – User configured, code specific ID bytes are[...]

7 –3 ‡ Enter configuration mode then scan this bar c ode followed by the three code byte bar codes (on pag e 1 2 –1) that represent a unique ID character to be associated with this bar code type. ³ 90 7200 ~ Configurable TRI-OPTIC ID ‡ ³ 90 7100 ~ Configurable Standard 2 of 5 ID ‡ ³ 90 6700 ~ Configurable Interlea ved 2 of 5 ID ‡ ³ [...]

7 –4 Standard Prefix Characters ³ 11 6615 Enable STX Prefix – The scanner will transmit a Start of TeXt (ASCII 02H) before each bar code. ³ 11 6605 * Disable STX Prefix ³ 10 5513 Enable Rochford-Thomson Mode ³ 10 5503 * Disable Rochford-Thomson Mode ³ 10 7915 Enable AIM ID Characters ³ 10 7905 * Disable AIM ID Characters ³ 11 6617 Enable[...]

7 –5 ³ 10 7916 Enable SANYO ID Characters ³ 10 7906 * Disable SANYO ID Characters ³ 10 5512 Enable Manufacturer ID Prefix ³ 10 5502 * Disable Manufacturer ID Prefix ³ 10 5511 Enable “C” Prefix ³ 10 5501 * Disable “C” Prefix ³ 10 5510 Enable “$” Prefix ID for UPC/EAN ³ 10 5500 * Disable “$” Prefix ID for UPC/EAN ³ 11 6611 [...]

7 –6 Standard Suffix Characters ³ 11 6613 * Enable CR Suffix – The scanner transmits a carriage return after each bar code. ³ 11 6603 Disable CR Suffix. ³ 11 6612 * Enable LF Suffix – The scanner transmits a line feed after each bar code. Disable d when keyboard wedge defaults are load ed . ³ 11 6602 Disable LF Suffix. ³ 11 6610 Enable T[...]

7 –7 Longitudinal Re dundancy Check A Longitudinal Redundanc y Check (LRC) is an error checking char acter that is calculated across a sequence of data char acters. It is determined by eXclusive ORing (XOR) the characters to be check ed, starting with an initial value of 00H. The result, an “LRC byte” is then transmitted follo wing the data s[...]

7 –8 Character Replacements To replace a character: 1. Scan the enter/exit configuration mode bar c ode (on page 1–1). 2. Scan the character to replace code (shown below). 3. Scan the ASCII code byte value of the chara cter you wish to replace. Refer to the ASCII Reference Table in the Cod e Byte Usage section of this manual. 4. Scan the replac[...]

7 –9 User Configurable Su ffixes, All Data Note: Scan the Enter /Exit Configuration mode code before trying to set this feature. Refer to Multi-Code Method on page 1–1. ³ 90 4500 ~ Configurable Suffix Character #1 – A suffix ID can be added and assig ned for data transmission. Use this code with a 3 code byte sequence, on page 1 2 –1, whic[...]

7 –10 Special Formats ³ 10 7914 Enable SINEKO Mode ³ 10 7904 * Disable SINEKO Mode ³ 11 6711 Enable Newcode Formatting Mode A ³ 11 6701 * Disable Newcode Formatting Mode A ³ 11 6710 Enable Newcode Formatting Mode B ³ 11 6700 * Disable Newcode Formatting Mode B ³ 10 8017 Remove All Leading Zero’s ³ 10 8007 * Do Not Remove Leading Zero’[...]

88 8 –1 Code Formatting UPC/EAN Formatting ³ 10 7517 * Transmit UPC-A Check Digit ³ 10 7507 Do Not Transmit UPC- A Check Digit ³ 10 7516 Transmit UPC-E Check Digit ³ 10 7506 * Do Not Transmit UPC-E Check Digit ³ 10 7515 Expand UPC-E to 12 Digits – Expand UPC-E bar codes to the 12 digit equivalent, UPC-A bar codes. ³ 10 7505 * Do Not Expan[...]

8 –2 ³ 10 7513 Transmit Lead Zero on UP C-E – This option will transmit a zero before each UPC-E bar code . ³ 10 7503 Do Not Transmit Lead Zero on UPC-E ³ 10 7512 Convert EAN-8 to EAN-13 – The scanner will transmit five zeros before the bar code to convert EAN-8 to EAN-13. ³ 10 7502 * Do Not Convert EAN-8 to EAN-13 ³ 10 7511 * Transmit U[...]

8 –3 Codabar Formatting ³ 10 7717 Transmit Codabar Start/Stop Characters – Transmits Codabar’s Start/stop characters before and after each bar code. ³ 10 7707 * Do Not Transmit Codabar Start/Stop ³ 11 5100 * Normal Codabar Start/Stop Charact ers ³ 11 5110 Enable Transmit Codabar Sta rt/Stop Characters as Low er Case Characters ³ 10 7716 [...]

8 –4 Code 39 Formatting ³ 10 7715 Transmit Mod 43 Check Digi t on Code 39 – This feature works in conjunction with Mod 43 Check Digit on Code 39 option, on page 2–2. Both must be enabled for this feature to work. ³ 10 7705 * Do Not Transmit Mod 43 Check Digit on Code 39 ³ 10 7710 Transmit Code 39 Stop/Start Ch aracters – The scanner tran[...]

8 –5 Plessey ³ 10 7816 Transmit UK Plessey Check Digi t – The scanner will transmit UK Plessey Check Digit char acters and must be used with the UK Plessey opti on. ³ 10 7806 * Do Not Transmit UK Plessey Check Digit ³ 10 7815 Enable UK Plessey Special Format ³ 10 7805 Disable UK Plessey Special Format ³ 10 7711 Transmit MSI Plessey Check D[...]

8 –6[...]

99 9 –1 RS232 ³ 41 5554 * Enable RS232 Mode – the scanner will work with RS232 +/-12V serial output. Parity Features A parity bit is an extra data bit used to help catch data trans mission errors. The scanner’s parity must match the host’s p arity. ³ 31 6045 No Parity ³ 31 6005 Odd Parity – Select to set the parity bit to either a 1 or[...]

9 –2 ³ 41 5850 * 9600 BAUD Rate ³ 41 5840 4800 BAUD Rate ³ 41 5830 2400 BAUD Rate ³ 41 5820 1200 BAUD Rate ³ 41 5810 600 BAUD Rate ³ 41 5800 300 BAUD Rate Data/Stop Bits ³ 11 6013 8 Data Bits – The number of data bits transmitted for each character . ³ 11 6003 * 7 Data Bits ³ 11 6014 1 Stop Bit ³ 11 6004 * 2 Stop Bits Hardware Handsha[...]

9 –3 ³ 11 5815 * Character RTS/CTS – Activates/Deactivates RTS signal for each character . ³ 11 5805 Message RTS/CTS – Activates RT S before sending the first character and leaves it active until after the last character has been transmitted. ³ 12 4510 Invert RTS Polarity (RSV1) -12V = Active +12V = Inactive ³ 12 4500 * Standard RTS Polar[...]

9 –4 ³ 11 5915 Enable RTS Counter To ggle – The scanner will toggle the RTS line on a go od decode. ³ 11 5905 * Disable RTS Counter To ggle ³ 11 5914 Enable XON/XOFF Handsha king – The scanner will stop transmission whenever on XOFF (ASCII 13H) is received. Transmission will resume after an XON (ASCII 11H) is received . ³ 11 5904 * Disabl[...]

9 –5 ³ 11 5814 Enable 5 NAK Retries Allow up to 5 retransmissions of the data if a NAK is received. ³ 11 5804 * Disable 5 NAK Retries ³ 12 5210 Enable GLS Handsha king – Accept ]V for the ACK acknowledgement. ACK will no longer be accepted but NAK and any additional ACK/N AK protocol characters enab led are still accept ed. ³ 12 5200 * Disa[...]

9 –6[...]

1 0 –1 Keyboard Enable Keyboard Emulation ³ 99 9994 Load Keyboard Wedge Defaults – Loads the default settings for keyboard wedge mode. ³ 5155153 Enable Stand-A lone Keyboard Emulation – Use this with special stand-alone models th at are not cabled for an external keyboar d. Scan this bar code to enable the Stand-Alon e Mode. The scanner wil[...]

1 0 –2 ³ 41 6200 Belgium Keyboard ³ 4162100 Japan Keyboard ³ 41 6270 IBM 4700 Financial Keyboard ³ 41 6290 Sweden/Finland Key board ³ 4162110 Slovenian Keyboa rd Keyboard/System Type ³ 21 6215 * AT Keyboard – Includes IBM PS/2 and compatible models 50, 55, 60, 80. ³ 21 6205 XT Keyboard – Special firmware in Voyager. ³ 21 6225 PS/2 Key[...]

1 0 –3 ‘Dumb’ Terminal Selections Note: T he following terminals may require custom cabl es. ³ 31 6400 IBM Terminal Keyboa rds ³ 31 6410 Reserved Terminal Keyboard #2 ³ 31 6420 Reserved Terminal Keyboard #3 ³ 31 6430 Reserved Terminal Keyboard #4 ³ 31 6440 Reserved Terminal Keyboard #5 ³ 31 6450 Reserved Terminal Keyboard #6 ³ 31 6460 [...]

1 0 –4 Special Keyboard Features ³ 11 6311 Transmit Make Code Only – Not available on all models. ³ 11 6301 * Transmit Make/Break Code – Not availa ble on all models. ³ 11 6310 * Transmit FOH Break Code – T he scanner will transmit the FOH in the break-code sequence. ³ 11 6300 Do Not Transmit FOH Break Cod e ³ 11 6315 Transmit Cleanup [...]

1 0 –5 ³ 11 6214 Enable Auto Detect Mode (A T/PS2) – Automatically detects caps lock status. ³ 11 6204 * Disable Auto Detect Mode (A T/PS2) ³ 11 6214 Enable Caps Lock (XT) ³ 11 6204 * Disable Caps Lock (XT) ³ 11 6316 Send Numbers as Keypad Data – All data is sent as if it has been entered on a keypad. ³ 11 6306 * Send Numbers as Normal [...]

1 0 –6 ³ 11 6302 Enable Right A lt Key Sequencing ³ 11 6312 Disable Right A lt Key Sequencing ³ 11 6413 Enable LaCaixa Special Keyboard Prefix & Suffix Scan Codes ³ 11 6403 * Disable LaCaixa Special Keyboard Prefix & Suffix Scan Codes InterScan Code Delays ³ 81 6580 * InterScan Code Delay 800 msec – The time specified represents th[...]

1 0 –7 Control Sets In general, standard bar code symbologies will only encode the ASCII character set. Function keys, arrow keys and man y other extended keys on an IBM compatible keyboard do not transla te to ASCII characters. One method of ‘bar coding’ the extended ke ys is to substitute the extended key codes when a specific ASCII control[...]

1 0 –8 ASCII (HEX) ASCII Control Extended Key 00H Null Numeric Keypad + (Plus) 01H SOH Num Lock 02H STX Down Arrow 03H ETX Numeric Keypad - (Minus) 04H EOT Insert 05h ENQ Delete 06H ACK System Request 07H BEL  (Right Arro w) 08H BS  (Left Arrow) 09H TAB Tab 0AH LF Caps Lock 0BH VT Shift Tab 0CH FF Left Alt 0DH CR Enter 0EH SO Left Con[...]

1 1 –1 USB ³ 4155114 Enable USB Interface ♦ ³ 99 9978 Enable Low Speed USB Defaults ♦ ♦ This feature is limited to GoDEX scanners without integrated Low Speed USB electronics. ³ 99 9940 Load Integrated Full Spe ed USB Keyboard Emulation Defaults ³ 99 9970 Load Integrated Full Spee d USB IBM/OEM Defaults ³ 99 9931 Load Integrate d Low S[...]

1 1 –2 ³ 11 78 1 7 Enable Bar Code ID ³ 11 78 0 7 Disable Bar Code ID ³ 11 98 1 7 Enab le USB Res erve C od e #1 ³ 11 98 0 7 Di sa ble USB Re serve Code #1 ³ 99 99 7 3 Enab le USB Res erve C od e #2 ³ 99 99 7 2 Di sa ble USB Re serve Code #2 ³ 99 99 6 7 Sea rs USB De faults ³ 99 99 6 6 Sea rs Aux De faul ts ³ 11 78 1 3 Enable I BM 1520 C[...]

1 2 –1 Code Bytes Usage The scanner must be in Configuration Mode for the features requiring code bytes for configuration. The Enter/Exit Confi guration Mode bar code must be scanned before starting the config uration c ycle. User configurable pr efix/suffix characters can then be saved by scanning th e 3 dig it decimal equivalent of the ASCII ch[...]

1 2 –2 ³8 Code Byte 8 ³9 Code Byte 9 Reserved Codes ³ 99 9988 ~ Enable Reserved Code – Contact GoDEX for information about this feature. ³ 99 9987 ~ Disable Reserved Code Code Type Table Code Byte Code Types 004 UPC-A 002 UPC-E 003 EAN-8 005 EAN-13 080 Code 39 081 Codabar 082 Interleaved 2 of 5 083 Code 128 084 Code 93 091 MSI Plessey 092 C[...]

1 2 –3 ASCII Reference Table HEX Value Decimal Value/ Code Byte Value Character Control Keyboard Eqv 00 000 NUL @ 01 001 SOH A 02 002 ST X B 03 003 ETX C 04 004 EOT D 05 005 ENQ E 06 006 ACK F 07 007 BEL G 08 008 BS H 09 009 HT I 0A 010 LF J 0B 011 VT K 0C 012 FF L 0D 013 CR M 0E 014 SO N 0F 015 SI 0 10 016 DLE P 11 017 DC1 Q 12 018 DC2 R 13 019 [...]

1 2 –4 HEX Value Decimal Value/ Code Byte Value Character Control Keyboard Eqv 1D 029 GS ^ 1E 030 RS _ 1F 031 US space,blank 20 032 SP 21 033 ! 22 034 “ 23 035 # 24 036 $ 25 037 % 26 038 & 27 039 ‘ apostrophe 28 040 ( 29 041 ) 2A 042 * 2B 043 + 2C 044 , comma 2D 045 - minus 2E 046 . period 2F 047 / 30 048 0 number zero 31 049 1 number one[...]

1 2 –5 HEX Value Decimal Value/ Code Byte Value Character Control Keyboard Eqv 3C 060 < less than 3D 061 = 3E 062 > greater than 3F 063 ? 40 064 @ shift P 41 065 A 42 066 B 43 067 C 44 068 D 45 069 E 46 070 F 47 071 G 48 072 H 49 073 I letter l 4A 074 J 4B 075 K 4C 076 L 4D 077 M 4E 078 N 4F 079 O letter O 50 080 P 51 081 Q 52 082 R 53 083 [...]

1 2 –6 HEX Value Decimal Value/ Code Byte Value Character Control Keyboard Eqv 5A 090 Z 5B 091 [ shift K 5C 092 shift L 5D 093 ] shift M 5E 094 ^ à,shift N 5F 095 _  , shift 0, underscore 60 096 ‘ accent grave 61 097 a 62 098 b 63 099 c 64 100 d 65 101 e 66 102 f 67 103 g 68 104 h 69 105 I 6A 106 j 6B 107 k 6C 108 l 6D 109 m 6E 110 n 6F 1[...]

1 2 –7 HEX Value Decimal Value/ Code Byte Value Character Control Keyboard Eqv 79 121 y 7A 122 z 7B 123 { 7C 124 | vertical slash 7D 125 } alt mode 7E 126 ~ (alt mode) 7F 127 DEL delete, rubout Extended Key Code Reference Table Key At S ca n Code PS2 Scan Code 3151 Prefix/Suffix Value Hex = Decimal  75H 48H 63H 80H = 128  72H 50H 60H [...]

1 2 –8 Key At S ca n Code PS2 Scan Code 3151 Prefix/Suffix Value Hex = Decimal F8 0AH 42H 3FH 97H = 151 F9 01H 43H 47H 98H = 152 F10 09H 44H 4FH 99H = 153 F11 78H 57H 56H 9AH = 154 F12 07H 58H 5EH 9BH = 155 Numeric + 79H 4EH 00H 9CH = 156 Numeric - 7BH 4AH 7CH 9DH = 157 Numeric * 7CH 37H 00H 9EH = 158 Caps Lock 58H 3AH 14H 9FH = 159 Num Lock 77H [...]

1 3 –1 Miscellaneous Features Custom Defaults ³ 84 66 0 0 Enable F actory Defa ul ts – Sc an this co de foll owed by Re call De f ault s co de to en ab le a nd lo ad factory de faults. ³ 99 99 9 8 Recall Defaults ³ 8 466128 0 R ub y Verif on e Defa ul ts – S can t his co de foll owed by Re call De f ault s co de to en ab le a nd lo ad Ru b[...]

1 3 –2 Serial Program Mode For Serial Pr og r am Mode , all comma nds must be f ramed by an ST X (02 He x) and ETX (03 He x). To recall de faults: 1. Tr ansmit < STX> 999 9 99 <ETX > through the Serial P o rt. Th is wi ll put the scan n er in ser i al pr og ram mo de. Scan ning wi ll be sus pen ded a nd the scan n er will re spo nd wi[...]

1 4 –1 Cont act Information 1 4 www.godexintl.com Godex International infoGT@godexintl.com +886-2-2225-8580 Godex China infoGC@godexintl.com +86-21-5665-1313 Godex Europe infoGE@godexintl.com +49-2193-53396-0 Godex Americas infoGA@godexintl.com +1-805-987-5100[...]