Hanns.G HL195 manual

HL195 HSG1 145 OSD[V4.393][...]

User ’ s Manual OSD[4.393] 2 Before operating the monitor, please read this manual thoroughly. This manual should be retaine d for future reference. FCC C lass B Radio F requenc y Interfer ence S tatement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These li[...]

User ’ s Manual 3 Congratulations! This display i s designed for both you and the pl anet! The display you have just purchased carries the T CO Certified label. This ensu res that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performa[...]

User ’ s Man ual 4 RECYCLING INFORM ATION We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropria te treatm ent and recycling of industrial technology devices at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-int[...]

User ’ s Manual 5 T ABLE OF CONTENTS SAFETY NOTICE .................................................................................................. 6 PRECAU TIONS ................................................................................................ . 6 SPECIAL NOTES ON LC D MONIT ORS ..................................................[...]

User ’ s Man ual 6 SAFETY NOTICE 1. The changes or modifications not expressly approved by the part y responsible for compliance could void the user's authority to operate the equipment. 2. Sh ielded interface cables and AC power cord, if an y , must be used in order to comply with the emission limits. 3. The manufacturer is not responsible [...]

User ’ s Manual 7 SPECIAL NOTES ON LC D MONIT ORS The following symptoms are normal with LCD monitor and do not indicate a problem.  Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn off the Power Switch and then turn it on again to make sure the flicker disappears.  Y ou may find slightly uneven b[...]

User ’ s Man ual 8 BEFORE YOU OPERA TE THE MONIT OR FEA TURES  47c m / 18.5" W ide Screen TFT Color LED Backlight Monitor  Crisp, Clea r Display for W indows  EP A ENERGY S T AR ®  GP Green Product  Er gonomic Design  Spa ce Saving, Compact Case Design CHECKING THE CON TENTS OF THE P ACKAGE The product pac kage should incl[...]

User ’ s Manual 9 INST ALLA TION INSTRUCTIONS INST ALL REMOVE Figure.1. Installing and Removing the Ba se INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer section of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify th[...]

User ’ s Man ual 10 SETTING THE MON ITOR ON THE W ALL DISSEMBLING THE ST AND BASE: 1. Disconnect all the cables and cords from the Monitor to prevent breakage. 2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the Monitor . 3. Squeeze the sides to release the retaining plastic[...]

User ’ s Manual 11 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer before performing the procedure below . 1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the computer ’ s VGA port. 2. Connect the audio cable between the monitor's audio input and the PC's audio output (green po[...]

User ’ s Man ual 12 ADJUSTING THE VIEWING ANGLE  F or optimal viewing it is recommended to look at the full face of the monitor , then adjust the monitor ’ s angle to your own pre ference.  Hold the stand so y ou do not topple the mon itor when you change the monitor ’ s angle.  Y ou are able to adjust the monitor ’ s angle from -5[...]

User ’ s Manual 13 OPERA TING INSTRUCTIO NS GENERAL INSTRUC TIONS Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Fi gure 4). B y ch anging these settings, the picture can be adjusted to your personal preferences.  The power cord should be connected.  Conne c[...]

User ’ s Man ual 14 FRONT P A NEL CONTROL  Power Button: Press this button to switch ON/OFF of monitor ’ s power .  Power Indicator: Green — P ower On mode. Orange — Power Saving mode.  MENU / RETURN : 1. T urn the OSD menu on/off or return to the previous menu. 2. Exit OSD menu when in volume OSD status.[The availability of this f[...]

User ’ s Manual 15 Resolution 640x400@70Hz ↔ 720x400@70Hz 640x400@85Hz ↔ 720x400@85Hz 640x480@60Hz ↔ 720x480@60Hz 1024x768@70Hz ↔ 1280x768@70Hz 1280x768@60Hz ↔1360x768@60Hz 1400x1050@60Hz ↔ 1680x1050@60Hz 1400x1050@RB 60Hz ↔ 1680x1050@RB 60Hz 1400x1050@75Hz ↔ 1680x1050@75Hz ** The screen resolutions available will depend on the pu[...]

User ’ s Man ual 16 HOW T O ADJUST A SETTINGS BRIGHTNESS/ CONTRAST BRIGHTNESS Adjust the brightness value of the display according to your preference. Select 「 BRIGHTNESS 」 option to adjust the brightness value. CONTRAST Adjust the contrast value of the display according to your preference. Select 「 CONTRAST 」 option to adjust the contras[...]

User ’ s Manual 17 display , which does not ensure the image is shown as is or in initial scale. 「 FIT 」 indicates scaling by the proportion of original images, which may cause the screen showing black bands. [The availability of this function depends upon the selected model] H-POSITION Select the 「 H-POSITION 」 option to shift the screen[...]

User ’ s Man ual 18 the OSD. Enter the option and adjust the level. OSD TI ME- OUT Select 「 OSD TIME-OUT 」 opti on to set the OSD time out from 10 to 100 seconds. Enter the option and adjust the level. OSD COLOR T o choose the color combination of the OSD window , select 「 OSD COLOR 」 option under 「 OSD SETTING 」 menu, choose modes 1/[...]

User ’ s Manual 19 PLUG AND PLA Y Plug & Play DDC2B F eature This monitor is equipped with VESA DDC2B capabilities accor ding to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidi[...]

User ’ s Man ual 20 TECHNICAL SUPPOR T (F AQ) Q & A FOR GEN ERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position. *Power Cord should be connected. No Plug & Play *Check if the PC system is Plug & Play compatible. *Check if the V ideo C ard is Plug & Play compat[...]

User ’ s Manual 21 INPUT as a PC option, and make sure PC audio output cable is connected to monitor’s LINE IN port(or AUDIO IN port) . [For HDMI Input only][...]

User ’ s Man ual 22 ERROR M ESSAGE & POSSIBLE SOL UTIONS  CABLE NOT CONNECTED: 1. Check that the signal-cable is properly connected, I f the conn ector is loose, tighten the connector ’ s screws. 2. Check the signal- cable’ s connection pins for damage.  INPUT NOT SUPP ORT : Your computer has been set to unsuitable display mode, set[...]

User ’ s Manual 23 APPENDI X SPECIFICA TIONS LCD Panel Driving system TFT Color LED Size 47cm / 18.5" Diagonal Pixel pitch 0.300mm(H) x 0.300mm(V) V ideo H-Frequency 24KHz – 61 KHz V -Frequency 56 – 75Hz Display Colors 16.7M Colors Max. Resolution WXGA 1366 x 768 @60 Hz Plug & Play VESA DDC2B TM Power consumption ON Mode 28W(T ypical[...]