Hitachi CP-DW10NEF manual

1 Projector CP-D W10N User's Manual (detailed) Oper a ting Guide Thank you for purchasing this projector . ►Before using this product, please read all manuals for this product. Be sure to read “ Safety Guide ” first. After reading them, store them in a safe place for future reference. WARNING • The information in this manual is subjec[...]

2 Contents Contents About this manual ........... 1 Contents . ................. 2 Projector features .......... . 3 Prepar ations ............... 3 Checking the contents of package ... 3 Fastening the lens cover .......... 4 Par t names . ............... 5 Projector . ..................... 5 Control panel ................... 6 Rear panel . .......[...]

3 Projector features / Prepar a tions Projector features The projector provides you with the broad use by the following features.  The unique optics system produces a large projected image in a short distance, which provides you with various ways of use.  The double layer filter system is expected to function longer and offers you less maint[...]

4 Projector features / Prepar a tions F astening the lens co ver T o avoid losing the cover , please fasten the lens cover to the projector using the included strap. Put the strap end into the slit of the lens cover with the knot on the side of the lens. Make sure that the strap is inserted to the end of the slit. Fasten the strap to the strap hole[...]

5 Par t names Part names Pr ojector (1) Lamp cover (  66 ) The lamp unit is inside. (2) Focus ring (  21 ) (3) Control panel (  6 ) (4) Elevator buttons (x 2) (  21 ) (5) Elevator feet (x 2) (  21 ) (6) Remote sensor (  15 ) (7) Lens (  70 ) (8) Intake vents (9) Filter cover (  68 ) The air filter and intake vent are inside[...]

6 POWER TEMP LAMP MENU INPUT ST ANDBY/ON (1) (3) (2) (4) (6) (5) Par t names Contr ol panel (1) ST ANDBY/ON button (  17 ) (2) INPUT button (  18, 25 ) (3) MENU button (  25 ) It consists of four cursor buttons. (4) POWER indicator (  14, 17, 73 ) (5) TEMP indicator (  73 ) (6) LAMP indicator (  73 ) R ear panel (  10 ) (1) AUD[...]

7 Par t names R emote contr ol (1) VIDEO button (  19 ) (2) COMPUTER button (  19 ) (3) SEARCH button (  20 ) (4) ST ANDBY/ON button (  17 ) (5) ASPECT button (  20 ) (6) AUT O button (  22 ) (7) BLANK button (  24 ) (8) MAGNIFY - ON button (  23 ) (9) MAGNIFY - OFF button (  16, 23 ) (10) MY SOURCE/DOC.CAMERA button ( ?[...]

8 Setting up Install the projector according to the environment and manner the projector will be used in. Ar r angement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 1280 x 800 a Screen size (diagonal) b Projection distance (±8%) c1[...]

9 Setting up ►Place the projector in a stable horizontal position. If the projector falls or is knocked over , it could cause injury and/or damage to the projector . Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined[...]

10 LAN HDMI AUDIO OUT RGB OUT AUDIO OUT RGB OUT RS-232C RGB IN Y C B /P B C R /P R COMPONENT VIDEO OUT L R AUDIO OUT VIDEO OUT L R AUDIO OUT L R AUDIO OUT S-VIDEO OUT L R AUDIO IN HDMI VCR/DVD/Blu-ray Disc player Speakers (with an amplifi er) PC Monitor Setting up Connecting y our de vices Be sure to read the manuals for devices before connecting [...]

11 ►Do not disassemble or modify the projector and accessories. ►Be careful not to damage the cables, and do not use damaged cables. WARNING ►T urn of f all devices and unplug their power cords prior to connecting them to projector . Connecting a live device to the projector may generate extremely loud noises or other abnormalities that may r[...]

12 Setting up • Be sure to read the manuals for devices before connecting them to the projector , and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Some signal may need an adapter to input this projector . - Some PCs have m[...]

13 Setting up About Plug-and-Play capa bility Plug-and-Play is a system composed of a PC, its operating system and peripheral equipment (i.e. display devices). This projector is VESA DDC 2B compatible. Plug-and-Play can be used by connecting this projector to a PC that is VESA DDC (display data channel) compatible. • T ake advantage of this featu[...]

14 Setting up Connecting po wer supply 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. ►Please use extra caution when connecting the power cord, a[...]

15 R emote contr ol Remote control About the r emote control signal The remote control works with the projector ’s remote sensor . This projector has a remote sensor on the front. The sensor senses the signal within the following range when the sensor is active: 60 degrees (30 degrees to the left and right of the sensor) within 3 meters about. In[...]

16 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 12 ESC ENTER MENU RESET COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE R emote contr ol Changing the fr equenc y of r emote control signal The accessory remote control has the two choices on signal frequency , Mode 1:NORMAL and Mode 2:HIGH. If the r[...]

17 P ower on/off 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. T ur ning on the pow er 2. Make sure that the POWER indicator is steady orange (  73 ). Then remove the lens cover . 3. Press the ST ANDBY/ON button on the projector or the remote control. The projection lamp will light up and th[...]

18 Operating Operating 1. Adjusting the v olume Use the VOLUME +/- buttons to adjust the volume. A dialog will appear on the screen to aid you in adjusting the volume. If you do not do anything, the dialog will automatically disappear after a few seconds. ● When is selected for current picture input port, the volume adjustment is disabled. Please[...]

19 VIDEO DOC.CAMERA KEYSTONE ASPECT SEARCH BLANK MUTE MY BUTTON POSITION 12 MENU COMPUTER MY SOURCE/ AUTO MAGNIFY PAGE UP VOLUME DOWN ࡯ ON OFF 㧗 FREEZE Operating 1. Press the VIDEO button on the remote control. Each time you press the button, the projector switches its input port from the current port as below . Selecting an input signal (conti[...]

20 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn. Selecting an aspect r a tio ● The ASPECT button does not work when no proper signal is inputted. ● The NORMAL mode keeps the original aspect ratio setting. ● The on-screen menu might be displayed outsi[...]

21 Operating Adjusting the pr ojector's ele vator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 3 degrees. [...]

22 Operating 1. Press the POSITION button on the remote control while no menu is on screen, to display the D-SHIFT (  38 ) dialog on screen. Adjusting the position 2. Use the ▲, ▼, ◄ and ► buttons to adjust the picture position. Press the POSITION button again to finish this operation. ● This is a function to shift the position of the[...]

23 Operating • The MAGNIFY dialog will automatically disappear in several seconds with no operation. The dialog will appear again if the MAGNIFY ON button is pressed when the dialog has automatically disappeared. • While the MAGNIFY dialog is displayed, press the MAGNIFY ON button to switch the dialog between magnifying area shifting (with the [...]

24 Operating 1. Press the BLANK button on the remote control. The BLANK screen will be displayed instead of the screen of input signal. Please refer to the BLANK item in the SCREEN menu (  41 ). T o exit from the BLANK screen and return to the input signal screen, press the BLANK button again. T empor arily blanking the scr een ● The projector[...]

25 POWER TEMP LAMP MENU INPUT ST ANDBY/ON Operating 1. T o start the MENU, press the MENU button. The MENU you last used (EASY or ADV ANCED) will appear . The EASY MENU has priority to appear just after powered on. Using the menu function 2. (1) Use the ▲/▼ cursor buttons to select an item to operate. If you want to change it to the ADV ANCED M[...]

26 Operating Using the menu function (continued) 3. T o close the MENU, press the MENU button again or select the EXIT and press the ◄ cursor (or the ENTER ) button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, use the cursor buttons after pressing the P[...]

27 EASY MENU EASY MENU From the EASY MENU, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons. Then perform it according to the following table. Item Description ASPECT Using the ◄/► cursor buttons switches the mode for aspect ratio. See the ASPECT item in the IMAGE menu (  32 ). • The on-scree[...]

28 EASY MENU Item Description ECO MODE Using the ◄/► cursor buttons turns off/on the eco mode. See the ECO MODE item in the SETUP menu (  38 ). MIRROR Using the ◄/► cursor buttons switches the mode for mirror status. See the MIRROR item in the SETUP menu (  39 ). RESET Performing this item resets all of the EASY MENU items except the [...]

29 PICTURE menu PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item. Then perform it according to the following table. Item Description BRIGHTNESS Using the ◄/► cursor buttons adjusts the brightne[...]

30 PICTURE menu Item Description COLOR TEMP Using the ▲/▼ cursor buttons switches the color temperature mode. T o adjust CUSTOM Selecting a mode whose name includes the CUSTOM and then pressing the ► cursor (or the ENTER ) button displays a dialog to aid you in adjusting the OFFSET and GAIN of the selected mode. The OFFSET adjustments change [...]

31 PICTURE menu Item Description TINT Using the ◄/► cursor buttons adjusts the tint. Reddish  Greenish • This item can be selected when input signals are video, s-video or component video signals. • When input signal is HDMI, this item can also be selected if either 1) or 2) applies. 1) HDMI FORMA T is set to VIDEO. 2) HDMI FORMA T is se[...]

32 IMAGE menu IMAGE menu From the IMAGE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item. Then perform it according to the following table. Item Description ASPECT Using the ▲/▼ cursor buttons switches the mode for aspect r[...]

33 IMAGE menu Item Description H POSITION Using the ◄/► cursor buttons adjusts the horizontal position. Right  Left • Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs, please reset the horizontal position to the default setting. Pressing the RESET button on the remote control when the H POSITIO[...]

34 INPUT menu INPUT menu From the INPUT menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item. Then perform it according to the following table. Item Description PROGRESSIVE Using the ▲/▼ cursor buttons switches the progress mod[...]

35 INPUT menu Item Description VIDEO FORMA T The video format for the S-VIDEO port and the VIDEO port can be set. (1) Use the ▲/▼ cursor buttons to select the input port. S-VIDEO  VIDEO (2) Using the ◄/► cursor buttons switches the mode for video format. AUTO  NTSC  P AL  SECAM N-P AL  M-P AL  NTSC4.43 • This item is per[...]

36 INPUT menu Item Description COMPUTER IN The computer input signal type for the COMPUTER IN1 and IN2 ports can be set. (1) Use the ▲/▼ cursor buttons to select the COMPUTER IN port to be set. COMPUTER IN1  COMPUTER IN2 (2) Use the ◄/► cursor buttons to select the computer input signal type. AUTO  SYNC ON G OFF • Selecting the AUTO[...]

37 INPUT menu Item Description RESOLUTION The resolution for the COMPUTER IN1 and the COMPUTER IN2 input signals can be set on this projector . In the RESOLUTION menu select the resolution you wish to display using the ▲/▼ cursor buttons. ■AUTO Selecting AUTO will set a resolution appropriate to the input signal. ■ST ANDARD Pressing the ►[...]

38 SETUP menu SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) buttonn to execute the item. Then perform it according to the following table. Item Description D-ZOOM Using the ◄/► cursor buttons adjusts the magnification ra[...]

39 SETUP menu Item Description MIRROR Using the ▲/▼ cursor buttons switches the mode for mirror status. NORMAL  H:INVERT  V :INVER T  H&V :INVER T If the T ransition Detector is on and the MIRROR status is changed, the TRANSITION DETECT OR ON alarm (  63 ) will be displayed when projector is restarted after the AC power is turne[...]

40 A UDIO menu AUDIO menu From the AUDIO menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item. Then perform it according to the following table. Item Description VOLUME Using the ◄/► cursor buttons adjusts the volume. Low  H[...]

41 SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item. Then perform it according to the following table. Item Description LANGUAGE Using the ▲/▼/◄/► cursor buttons switches the OSD [...]

42 SCREEN menu Item Description MyScreen This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and the ST ART UP screen. Display the image you want to capture before executing the following procedure. 1. Selecting this item displays a dialog titled “MyScreen”. It will ask you if you start cap[...]

43 SCREEN menu Item Description MyScreen Lock Using the ▲/▼ cursor buttons turns on/off the MyScreen lock function. ON  OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the MyScreen P ASSWORD item in the SECURITY me[...]

44 SCREEN menu Item Description SOURCE NAME Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ cursor buttons on the SCREEN menu to select the SOURCE NAME and press the ► cursor (or the ENTER ) button. The SOURCE NAME menu will be displayed. (2) Use the ▲/▼ cursor buttons on the SOURCE NAME menu to select th[...]

45 SCREEN menu Item Description TEMPLA TE Using the ▲/▼ cursor buttons switches the mode for the template screen. Press the ► cursor (or the ENTER ) button to display the selected template, and press the ◄ cursor button to close the displayed screen. The last selected template is displayed when the MY BUTT ON allocated to the TEMPLA TE func[...]

46 SCREEN menu Item Description C.C. (Closed Caption) The C.C. is the function that displays a transcript or dialog of the audio portion of a video, files or other presentation or other relevant sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not wor[...]

47 OPTION menu OPTION menu From the OPTION menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button to execute the item, except for the items LAMP TIME and FIL TER TIME. Then perform it according to the following table. Item Description AUTO SEARCH Using [...]

48 OPTION menu Item Description AUTO POWER OFF Using the ▲/▼ cursor buttons adjusts the time to count down to automatically turn the projector off. Long (max. 99 minutes)  Short (min. 0 minute = DISABLE) When the time is set to 0, the projector is not turned off automatically . When the time is set to 1 to 99, and when the passed time with n[...]

49 OPTION menu Item Description MY BUTT ON This item is to assign one of the following functions to the MY BUTTON 1/2 on the remote control (  7 ). (1) Use the ▲/▼ cursor buttons on the MY BUTT ON menu to select a MY BUTT ON - (1/2) and press the ► cursor (or the ENTER ) button to display the MY BUTT ON setup dialog. (2) Then using the ▲[...]

50 OPTION menu Item Description SERVICE Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ cursor buttons, and press the ► cursor (or the ENTER ) button on the remote control to execute the item. F AN SPEED Using the ▲/▼ cursor buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use a[...]

51 OPTION menu Item Description SERVICE (continued) KEY LOCK Using the ▲/▼ buttons turns on/off the key lock feature. When ON is selected, the buttons on the projector except the ST ANDBY/ON button are locked. ON  OFF • Please use this function to prevent tampering or accidental operation. This function does not have any ef fect on the rem[...]

52 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) COMMUNICA TION TYPE Select the communication type for transmission via the CONTROL port. NETWORK BRIDGE  OFF NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer . The CONTROL por[...]

53 OPTION menu Item Description SERVICE (continued) COMMUNICA TION (continued) RESPONSE LIMIT TIME Select the time period to wait for receiving response data from other device communicating by the NETWORK BRIDGE and the HALF-DUPLEX through the CONTROL port. OFF  1s  2s  3s OFF: Select this mode if it is not required to check the responses [...]

54 OPTION menu Item Description SERVICE (continued) INFORMA TION Selecting this item displays a dialog titled “INPUT_INFORMA TION”. It shows the information about the current input. • The “FRAME LOCK” message on the dialog means the frame lock function is working. • This item can't be selected for no signal and sync out. • When t[...]

55 NETWORK menu Remember that incorrect network settings on this projector may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select “NETWORK” from the main menu to access the following functions. Select an item using the ▲/▼ cursor buttons on t[...]

56 NETWORK menu Item Description SETUP (continued) IP ADDRESS Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF . • The IP ADDRESS is the number that identifies this projector on the network. Y ou cannot have two devices with the same IP ADDRESS on the same network. • The IP ADDRESS[...]

57 NETWORK menu Item Description PROJECTOR NAME (1) Use the ▲/▼ buttons on the NETWORK menu to select the PROJECTOR NAME and press the ► button. The PROJECT OR NAME dialog will be displayed. (2) The current PROJECTOR NAME will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the ▲/▼/◄/► buttons and [...]

58 NETWORK menu Item Description MY IMAGE Selecting this item displays the MY IMAGE menu. The application software “PJImage” is required to store image(s) into the projector . Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE (  MY IMAGE (Still Image T ransfer) Display of the User ’ s Manual - Network Guide) [...]

59 NETWORK menu Item Description INFORMA TION Selecting this item displays the NETWORK_INFORMA TION dialog for confirming the network settings. • Only the first 16 characters of the projector neme are displayed. • Nothing (blank) is shown in the “PROJECTOR NAME” field until you setup the item (  57 ). • When the voltage level of the b[...]

60 SECURITY menu This projector is equipped with security functions. From the SECURITY menu, items shown in the table below can be performed. T o use SECURITY menu: User registration is required before using the security functions. Enter the SECURITY menu 1. Use the ▲/▼ cursor buttons on the SECURITY menu to select ENTER P ASSWORD and press the[...]

61 SECURITY menu Item Description MyScreen P ASSWORD The MyScreen P ASSWORD function can be used to prohibit access to the MyScreen function and prevent the currently registered MyScreen image from being overwritten. 1 T urning on the MyScreen P ASSWORD 1-1 Use the ▲/▼ cursor buttons on the SECURITY menu to select MyScreen P ASSWORD and press t[...]

62 SECURITY menu Item Description PIN LOCK The PIN LOCK is a function which prevents the projector from being used unless a registered Code is input. 1 T urning on the PIN LOCK 1-1 Use the ▲/▼ cursor buttons on the SECURITY menu to select PIN LOCK and press the ► cursor (or the ENTER ) button to display the PIN LOCK on/off menu. 1-2 Use the ?[...]

63 SECURITY menu Item Description TRANSITION DETECTOR ・ T ransition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed. ・ T ransition Detector alarm might appear on screen, if the MIRROR setting has been changed. • T o display the signal again, set this function to the OFF . • After about 5 mi[...]

64 SECURITY menu Item Description MY TEXT P ASSWORD The MY TEXT P ASSWORD function can prevent the MY TEXT from being overwritten. When the password is set for the MY TEXT ; • The MY TEXT DISPLA Y menu will be unavailable, which can prohibit changing the DISPLA Y setting. • The MY TEXT WRITING menu will be unavailable, which can prevent the MY [...]

65 SECURITY menu Item Description MY TEXT DISPLA Y (1) Use the ▲/▼ cursor buttons on the SECURITY menu to select the MY TEXT DISPLA Y and press the ► cursor (or the ENTER ) button to display the MY TEXT DISPLA Y on/of f menu. (2) Use the ▲/▼ cursor buttons on the MY TEXT DISPLA Y on/off menu to select on or of f. ON  OFF When it is set[...]

66 Maintenance Maintenance A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a new [...]

67 Maintenance Lamp war ning Replacing the lamp (continued) HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE ► The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a dif ferent lifetime, and some may burst or bur[...]

68 Maintenance Cleaning and r eplacing the air filter The air filter has two kinds of filters inside. Please check and clean the air filter periodically . When the indicators or a message prompts you to clean the air filter , comply with it as soon as possible. If the filters are damaged or heavily soiled, replace them with the new ones. T o [...]

69 WARNING ►Always handle the batteries with care and use them only as directed. Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. And also improper use may result in cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment. ・ Be sure to use only the batteries[...]

70 Maintenance Other car e In order to ensure the safe use of your projector , please have it cleaned and inspected by your dealer about once every year . 1. T urn the projector of f, and unplug the power cord. Allow the projector to cool sufficiently . 2. After making sure that the projector is cool adequately , lightly wipe the lens with a comme[...]

71 T roubleshooting T roubleshooting If an abnormal operation should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , the following checks and measures are recommended before requesting repair . If this does not resolve the problem, please contact your dealer or service company . They will tell you w[...]

72 Message Description There is no input signal. Please confirm the signal input connection, and the status of the signal source. The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector or the signal source specs. An improper signal is input. Please confirm the spec[...]

73 T roubleshooting R e gar ding the indica tor lamps When operation of the POWER , TEMP and LAMP indicators differs from usual, check and cope with it according to the following table. POWER TEMP LAMP Description Lighting In Orange T urned off T urned off The projector is in a standby state. Please refer to the section “Power on/off”. Blinking[...]

74 Regarding the indicator lamps (continued) • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be turned off. In such a case, disconnect the power cord, and wait at least 45 minutes. After the projector has sufficiently cooled down, please make con?[...]

75 T roubleshooting Phenomena tha t may be easy to be mistak en f or machine def ects About the phenomenon confused with a machine defect, check and cope with it according to the following table. Phenomenon Cases not involving a machine defect Reference page Power does not come on. The electrical power cord is not plugged in. Correctly connect the [...]

76 Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Reference page Sound does not come out. The signal cables are not correctly connected. Correctly connect the audio cables. 10 The MUTE function is working. Restore the sound pressing MUTE or VOLUME + / - button on the remote [...]

77 Phenomenon Cases not involving a machine defect Reference page No pictures or disturbed pictures are displayed on HDMI input. The HDMI cable is not correctly connected. Correctly connect the HDMI cable. 10 Y our HDMI equipment is not compatible with the projector . This projector can be connected with another equipment that has HDMI or DVI conne[...]

78 Phenomenon Cases not involving a machine defect Reference page When the ASPECT is set to NA TIVE, PICTURE POSITION does not work even if the vertical size of the displayed image does not fit visually on the effective display area. V ertical resolution of the input signal is equal to or more than the vertical resolution of display area that is d[...]

79 Phenomenon Cases not involving a machine defect Reference page Scheduled Display Image command does not work. The lamp is turned off. If the projector is in the standby state, please press the ST ANDBY / ON button on the projector or the remote control to turn on the lamp. If the POWER , TEMP , LAMP indicators on the control panel of the project[...]

80 Specifications Specifica tions Item Specification Product name Liquid crystal projector Liquid Crystal Panel 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 180 W UHB Speaker 10 W Power supply AC 100-120V/3.1A, AC220-240V/1.5A Power consumption 270 W T emperature range 5 ~ 35°C (Operating) Size 333 (W) x 103 (H) x 303 (D) mm * Not inc[...]

81 333 131 303 103 67 125 Specifications (continued) [unit: mm] Specificationsv[...]