Honeywell PW-6000 manual

July 2007 © 2007 Honeywe ll. All rights reserved. 800-00005 PW -6000 Intellig ent Contr oller Installation and Configuration Guide P ar t Number: PW6K1IC[...]

Copyright© 2007 Honeywell. All right s reserved. All product and brand names are the service ma rks, trademarks, registe red trademarks, or registered service marks of their respec tive owners. Printed in the United S tates of America. Honeywell reserves th e right to change an y inform ation in this document at any time without prior notice. Micr[...]

[...]

PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A iii C ONTENT S Notices........................ .................. .................. .................................... ................... 1 Warnings and Cautions .................................... ........................................ ...... 1 Damage During S[...]

PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A v L IST OF F IGURES Figure 1: PW-6000 Conn ections, LEDs, and DIP Sw itches .............................. 7 Figure 2: PW-6000 Power Terminals ........................... .................................... 13 Figure 3: PW-6000 Port Wiring ........ ..................[...]

PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A vii L IST OF T ABLES Table 1 PW-6000 Jumper Settings ....................... ......................................... .. 8 Table 2 PW-6000 DIP Switch Settings ........ .................................... ................ 9 Table 3 PW-6000 Technical Specifications ..[...]

viii www.honeywell.com[...]

PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 1 PW -6000 Installation 1 Notices 1.1 W arnings and Cautions Before Inst allation Wa r n i n g: Before installation, TURN OFF the external circuit breaker which supplies power to the system. Before connecting the device to the power su pply , verify that the output voltage is within spe[...]

2 www .honeyw ell.com PW-6000 Installation Notices Earth Grounding Wa r n i n g: EAR TH ground all enclosures for pr oper installation. Use Suppressors Wa r n i n g: Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell Integrated Security , Inc. recommends only D C strikes. 1.2 Damage During Shipment Caution: IF ANY [...]

PW-6000 Installation Notices PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 3 1.4 Disclaimer – Product Liab ility; Mutual Indemnification If a Customer receives a claim that a Product or any component thereof has caused personal injury or damage to th e property of others, Custo mer shall immediately notify Honeywell Integrated Se[...]

4 www .honeyw ell.com PW-6000 Installation Notices Show the RMA number on all packages ship ped. Packages, which are not marked with an RMA number will be refused at the factory and returned to you COD. Carefully pack the equipmen t for shipment. Use the original packing material whenever pos sible 1.7 Limited W arranty All Products so ld or licens[...]

PW-6000 Installation Product Overview PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 5 Customer shall not copy the des ign of any of the Produc ts or use or cause to be used any Product design or related materials for its own b enefit or for the benefit of any other party . The covenants contained in th is section shall remain effec[...]

6 www .honeyw ell.com PW-6000 Installation Product Overview 2.3 Other • An on-board real time clock maintains th e date and time, taking into account leap year and accounting for global time zones and daylight savings time changes. • The database for the system configur ation and card holders are stor ed in FLASH memory . • The event log b uf[...]

PW-6000 Installation Product Overview PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 7 Figur e 1: PW -6000 Connections, LEDs, and DIP Switches[...]

8 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware 3 Setting Up the PW -6000 Hard ware The PW -6000 processor is configured with 12 jumpers and a set of 4 DIP switches. These jumpers/switches set up the port in terface, end of line termination, and operating mode configuration. Refer to the tables below to set the jumpers a[...]

PW-6000 Installation Setting Up the PW-6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 9 3.2 Setting the DIP Switches Dual In-line Package (DIP) switc hes are re ad when the system powers up, except where noted otherwise. The followi ng table shows the setting opti ons. T able 2 PW -6000 DIP Switch Settings S1 S2 S3 S4 [...]

10 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware The PW -6000 DIP switches need to be set twice: 1. Configure the S4-S3-S2-S1 DIP switches to off-off-on-off to set the default TCP/IP address to 192.168.0.251. 2. Apply power to the panel to set the IP address. 3. Change the S4-S3-S2-S1 combination to off-off-off-on .(DIP [...]

PW-6000 Installation Setting Up the PW-6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 11 3.3 T echnical Specifications T able 3 PW -6000 T echnical Specifications Category Description W ARNING: PW -6000 is manufactured for use in low-voltage, Class 2 circuits only . Primary Power 12Vdc ± 10%, 300mA maximum. 12Vdc @ 24[...]

12 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware Caution: Locate the power source as close to this boar d as possible. Connect power with minimum of 18A WG wires. Note: POLARITY for 12 VDC power is important. Ma ke sure the +12 VDC is connected to the terminal labeled +12V and the return is connected to the terminal labe[...]

PW-6000 Installation Setting Up the PW -6000 Hardware PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 13 Run TimeSupplying Power to the PW -6000 Interface 3.5 Supplying Power to the PW -6000 Interface The processor accepts 12Vdc for power . Locate power source as close to the unit as possible and connect it with minimum of 18A WG wi[...]

14 www .honeyw ell.com PW-6000 Installation Setting Up the PW -6000 Hardware 3.6 Communications Wiring The PW -6000 proce ssor communicates to the host vi a on-board Ethernet 10Base-T/100Base-TX port or on port 1. Port 1 may be configured as RS-232, two-wire RS-485 or option al Lantronix Ethernet 10Base-T/ 100Base-TX CoBox-Micro interface. The RS-2[...]

PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 15 4 System Configuration via W eb Interface The PW -6000 comes with Access Control Device Server Manager (ACDSM) . The ACDSM is a built-in web server , through which you can co nfigure network and other system settings. Note[...]

16 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 4.3 Hom e Page The first screen after the login is the home page whic h displays all the ava ilable config uration links on the left navigation bar: Figur e 6: PW -6000 W eb Server Home Page[...]

PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 17 4.4 Network Settings Click the Network link on the navigation bar to display th e Network Settings screen where you can select the appropriate option button for dynamic or static IP address configuration: Figur e 7: PW -60[...]

18 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace St atic IP Configuration Method 1. Click the St a t i c I P option button to assign a static IP address, and enter the following information in the appropriate fields: • IP Address • Subnet Mask • Default Gateway 2. Click OK . 4.5 Host Port Click the Host Port[...]

PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 19 1. From PW6000 Communication Address dro p-down list, select one of the eight (0 to 7) available communication addresses for the PW -6000 board. Note: In the previous panels, this selection was made manually by setting the[...]

20 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace IP Client Connection T ype Figur e 9: PW -6000 Host Port Configurat ion Screen with IP Client Connection Note: The PW -6000 panel does not currently supp ort an IP Client connectio n.[...]

PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 21 Serial-RS232, Serial -RS485, Serial-Modem, or Se rial-CoBox Connection T ypes Figur e 10: PW -600 0 Host Port Configuration with Seria l RS-232 Connection 1. From the PW6000 Commun ication Address drop-d own list, select o[...]

22 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 3. For the Alternate Host Port , make the follo wing selections: a. Connection T ype . If you choose to co nfigure an alternate host port, an d if you have selected Serial-RS232 for the primary host port, select IP Server from the drop-down list for the alternate ho[...]

PW-6000 Installation System Configuration via Web Interf ace PW -6000 Installa tion Guide , D ocument 800-00005, Revi sion A 23 4.7 User Configuration Click the Users link on the navigation bar to display the User screen where you can add, edit, and delete user records: Figur e 12: PW -6000 W eb Server User Info Screen Adding a User Follow these st[...]

24 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace 3. Specify the maximum period of time a session will remain open withou t user activity . If the period expires without user activity , the user is logged out. After specifying the time period, click Save Session T imer to save the setting. 4. Configure the auto-sav[...]

PW-6000 Installation System Configuratio n via Web Interface PW -6000 Installa tion Guide , D ocument 800-00005, Revision A 25 4.9 Apply Setting Screen Click the Apply Setting link on the n avigation bar to apply the selected config uration values: Figur e 14: PW -6000 W eb Server Apply Setting Scr een Click Apply , Reboot to apply all the configur[...]

26 www .honeyw ell.com PW-6000 Installation System Configuration via Web Interf ace[...]

PW -6000 In stallation and Configurati on Guide , Docume nt 800-00005, Revision A 27 Appendix A PW -6000 W e b Server and Pro-W atch Channels The PW -6000 web server ’ s host port configuration requires correspo n ding changes in the way the Pro-W a tch’ s channels are configured. The PW -6000 web server host ports and the Pro-W atch channel po[...]

28 www.honeywell.com d. Click OK . e. From the Setting menu, select Apply , Reboot . The system will display the “Board is Restarting” message. 3. Set the port configurati on for the Pro-W atch channel: a. In Pro-W atch, click Hardware Configuration on the left navigation bar . b. Right click on your Site to laun ch the mini pop-up menu. c. Sel[...]

For more information: www .honeywell integrated .com Honeywell Access Systems 135 W . Forest Hill A ven ue Oak Creek, WI 53154 414-766-1700 414-766-1798 F ax European Office Boblingerstrasse 17 D-71101 Schonaich Ger many 49-7031-637-782 49-7031-637-769 F ax www .honeywell.com Specifications subject to change without notice. © Honeyw ell. All r igh[...]