Husky HU80522 manual

SA VE THIS MANUAL FOR FUTURE REFERENCE Y our pressur e washer has been engineered and manufactur ed to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-fr ee performance. WARNING: T o r educe the risk of injury , the user must read and understand the [...]

2  Introduction ..................................................................................................................................................................... 2 �  Important Safety Instructions .............................................................................................................................[...]

3 IMPOR T ANT SAFETY INSTRUCTIONS WARNING: Read and understand all instructions. Failur e to follow all instructions listed below may r esult in electric shock, fire and/or carbon monoxide poisoning which will cause death or serious personal injury . READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT  Know your tool. Read the operator’ s manual c[...]

4 SPECIFIC SAFETY RULES  Never direct a water stream toward people or pets, or any electrical device.  �Before starting any cleaning operation, close doors and windows. Clear the area to be cleaned of debris, toys, outdoor furniture, or other objects that could create a hazard.  �Never pick up or carry a machine while the engine is run[...]

5 SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Pr oper interpr eta- tion of these symbols will allow you to operate the tool better and safer . Read The Operator’ s Manual Safety Alert SYMBOL NAME DESIGNA TION/EXPLANA TION Do not expose to rain or use in damp locations. T o reduce the [...]

6 SYMBOLS SERVICE Servicing r equires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for r epair . When servic- ing, use only identical replacement parts. The operation of any power tool can result in foreign objects be[...]

7 FEA TURES Fig. 1 PRODUCT SPECIFICA TIONS Engine ........................................................................................................................................... Briggs and Stratton Q45 ™ * Fuel T ank Capacity ..............................................................................................................[...]

8 FEA TURES KNOW YOUR PRESSURE WASHER See Figure 1. The safe use of this product requires an understanding of the information on the tool and in this operator’ s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules . BRIGGS & STRA TTON EN[...]

9 ASSEMBL Y WARNING: If any parts ar e damaged or missing do not operate this too l until the p arts a re r ep laced . Failu re t o heed this warn- ing could result in serious personal injury . WARNING: Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse an[...]

10 ASSEMBL Y ADDING OIL TO THE ENGINE See Figure 3. NOTE: This machine has been shipped with appr oximately 2 oz. of oil in the engine from testing. Y ou must add oil to the engine before starting it the first time. CAUTION: Any attempt to start the engine without adding oil will result in engine failur e.  Place pressure washer on a flat, level[...]

11 ASSEMBL Y ASSEMBLING THE SPRA Y WAND See Figure 5. To attach the spray wand extension:  Place the threaded end of the wand extension in the connector on the end of the spray wand assembly.  Turn the connector clockwise until it stops. This secures the wand extension in place.  When not in use, remove the spray wand extension from the sp[...]

12 ASSEMBL Y CON NEC TIN G THE HIGH PRE SSU RE HOSE TO THE PUMP See Figure 7. ������After the high pressur e hose has been uncoiled and attached to the spray wand:  Align the collar on the threaded nipple on the pump.  Insert the nozzle on the end of the high pressure hose collar into the threaded nipple.  Turn the collar clock[...]

13 OPERA TION WARNING: Do not allow familiarity with tools to make you care- less. Remember that a car eless fraction of a second is sufficient to inflict serious injury . WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, r esulting in [...]

14 OPERA TION Fig. 11 USING THE SPRA Y WAND TRIGGER See Figure 11. �� For greater control and safety , keep both hands on the spray wand at all times.  Pull back and hold the trigger to operate the pressure washer.  Release the trigger to stop the flow of water through the nozzle. To engage the lock out:  Push up on the lock out until [...]

15 OPERA TION MOVING THE PRESSURE WASHER See Figure 14. NOTE: Never lift or carry this product using the moving handle.  Turn the pressure washer off.  Standing at the back of the machine, grasp the handle firmly with both hands and pu ll the handle up until it lock s into place with a “click”.  Tilt the machine toward you until it bal[...]

16 MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty , also wear a dust mask. WARNING: Bef or e inspe cti ng, cle[...]

17 MAINTENANCE REMOVING THE WHEEL ASSEMBL Y See Figure 17. T o change the spark plug, you must remove the wheel. T o remove:  Remove the hitch pin from the axle.  Lift the machine and slide the axle/wheel combination out of the machine base as shown. NOTE: Reinstall the wheel when maintenance is complete by reversing the above pr ocedure. CHE[...]

18 MAINTENANCE CHANGING THE OIL See Figure 20.  Run engine out of gas. Allow 30 minutes of “cool down” time.  �Place the pressure washer on blocks and put a container under the pressure washer.  Remove th e oil drain plug and drain the old oil. NOTE: Drain the oil while the engine is still warm but not hot. Warm oil will drain quickl[...]

19 TROUBLESHOOTING PROBLEM CAUSE SOLUTION Engine fails to start 1. No fuel in tank 1. Fill tank 2. Spark plug shorted or fouled 2. Replace spark plug 3. Spark plug is broken (cracked 3. Replace spark plug porcelain or electr odes broken) 4. Ignition lead wire shorted, br oken, 4. Replace lead wire or attach to spark or disconnected from spark plug [...]

20 NOTES[...]

21 W ARRANTY LIMITED NON-ENGINE WARRANTY STATEMENT T echtronic Industries North America, Inc. warrants to the original retail purchaser that this HUSKY ® brand pressur e washer is free fr om defect in material and workmanship and agrees to repair or r eplace, at T echtronic Industries North America, Inc.’ s discretion, any defective pr oduct fre[...]

TECHTRONICS INDUSTRIES NOR TH AMERICA, INC. Hwy 8 Pickens, SC 29671 Phone 1-866-340-3912 983000-869 1-30-06 (REV : 01) • SER VICE Now that you have purchased your tool, should a need ever exist for r epair parts or service, simply contact your near est Authorized Service Center . Be sure to provide all pertinent facts when you call or visit. Plea[...]