JVC DT-V9L1D manual

ENGLISH INSTR UCTIONS DT -V9L1D MUL TI FORMA T LCD MONIT OR Ta b le of Contents Safety Precautions .............................................. 2 IMPOR T ANT SAFEGU ARDS ........................... 2 Maintenance ..................................................... 3 Installation ............................................................ 4 To a[...]

2 PO WER CONNECTION The power supply v oltage rating of this product is A C 120 V (For U .S.A. and Canada) and AC 220 – 240 V (F or European countries, Asian countries, and United Kingdom). The power cord attached conf orms to the following po wer supply voltage and countries. Use only the power cord designated to ensure safety and EMC regulation[...]

ENGLISH 3 Maintenance Unplug this product fr om the wall outlet before cleaning. Screen To av oid irreparab le change in appearance of the screen such as unev en color , discoloration, scratches , be careful about the follo wing: • Do not paste or stic k anything using any glues or adhesive tapes . • Do not write anything on the screen. • Do [...]

4 Installation CA UTION • Do not rest your arm on the monitor or lean against the monitor . • Do not touch the LCD panel when installing the monitor . • Make sure to install the monitor securely to pre vent the monitor from f alling over , which causes damage to the monitor or injury . When shipped from factory , the stand is attached to the [...]

ENGLISH 5 To pre vent an accidental fall Fix the monitor to a wall b y using str ings. Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not pro vided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using [...]

6 Daily Operations / Connections 7 Fr ont panel • “NO EFFECT” is displa yed when you press a b utton which is not av ailable f or the current input or signal format (the lamp lights ev en when the function does not actually work). • The items controlled b y the MAKE system cannot be controlled by the buttons on the front panel (“REMO TE O[...]

ENGLISH 7 About the Information Display Audio Channel Selection Menu Operations If you press the input b utton of the current input, the status of the input signal and setting of muting are display ed for about 3 seconds . • When “ST A TUS DISPLA Y” is set to “A UT O” or “ON, ” the status below is also display ed in the follo wing cas[...]

8 7 Rear panel Daily Operations / Connections (cont.) CA UTION Do not connect the power cord until all other connections are completed. 1 POWER s witch Tu r ns the A C power on or off . • Y ou need to press button on the front panel to turn on the monitor after tur ning on the POWER s witch. 2 AC IN terminal AC power input connector . • Connect[...]

ENGLISH 9 Attaching the Power Cord Holder CA UTION Depending on the type of external batteries, the cov er may not be attached to the case . • The pro vided power cord holder pre vents accidental disconnection of the A C power cord from the A C IN terminal. • The po wer cord holder consists of two par ts, a case and a co ver . 1 CA UTION Use on[...]

10 Menu Configuration—MAIN MENU PICTURE IMPROVEMENT Setting for the picture quality Item T o do Setting value APERTURE * 1 Select the frequency of the luminance signal compensated in “APERTURE LEVEL. ” OFF , LOW , HIGH APERTURE LEVEL * 1 Compensate the frequency response of the luminance signal of the video signal. 01 – 10 sub menu Display [...]

11 ENGLISH Setting of “E.A UDIO GROUP” The setting values and selectab le audio channels of EMBEDDED A UDIO signals are as follo ws. 1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G) 2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G) 1-2G: channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G) 3G: channel(s) 9/10/11/12/9+10/11+[...]

12 Menu Configuration—SET -UP MENU FUNCTION SETTING Setting for the sub men u display , color system, color of the tally lamp , and format indicator Item T o do Setting value sub menu POSI. Select the contents and displaying position of “sub menu. ” ☞ “NO TE” COLOR SYSTEM Select the color system. • If the picture is unstable with “A[...]

13 ENGLISH Setting of “CHARA CTER SET . ” Assign a name for each video source f ollowing the steps belo w . 1 Change the input to one that you want to assign a video source name f or (VIDEO/COMPO . or SDI). • Y ou cannot store diff erent video source names for composite signal input (VIDEO) and component signal input (COMPO .). 2 Select “CH[...]

14 External Control 7 About the external contr ol This monitor has two e xter nal control terminals. • MAKE/TRIGGER terminal (RJ-45): The f ollowing e xter nal control systems are av ailable . (1) MAKE (make contact) system : Controls the monitor by short-circuiting the corresponding pin ter minal to the GND pin terminal, or disconnecting (openin[...]

15 ENGLISH 7 Using the RS-232C system Y ou can control the monitor from a personal computer etc. via the RS-232C ter minal. • Consult y our dealer for the details of the e xternal control specification. <Communication specifications> Baud Rate: 4800 bps Data Bits: 8 bits Pa r ity: No parity Stop Bits: 1 bit Flow Control: No control Communic[...]

16 T roubleshooting Solutions to common problems related to the monitor are described here. If none of the solutions presented here solves the prob lem, unplug the monitor and consult an authorized dealer or ser vice center . Symptom Probable cause and corrective action Pa ge No power supply • T ur n on the POWER s witch or DC s witch on the rear[...]

17 ENGLISH Specifications 7 General Model name DT -V9L1D T ype Multi format LCD monitor Screen size T ype 9 wide f or mat Aspect ratio 15:9 LCD panel 9˝ wide, IPS-Pro Effectiv e screen size Width: 195 mm Height: 117 mm Number of pixels displa yed 800 x 480 Number of colors display ed 16.20 million Viewing angle (TYP .) 170° (Horizontally), 170° [...]

18 Specifications (cont.) VESA mounting holes (8-M4, depth: 10 mm) 7 Dimensions Unit: mm <Front vie w> 222.4 218*/181** * at the higher position ** at the lower position 176 186 116 <Side view> <Rear view> 202 100 75 37.5 • When the stand is attached to the higher position. • When the stand is attached to the lower position. 2[...]