Konig DVB-S2 REC20 manual

DVB-S2 REC20 MANUAL (p. 2 ) High definition DVB-S2 receiver 2013-03-15[...]

ENGLISH High definition DVB-S2 receiver Introduction: • W e recommend that you read this manual before installing/using this product. • Keep this manual in a safe place for future reference. Content s GENERAL INFORMA TION ............................................................................................................................[...]

4.5 Conditional Access (Not active for this model) ........................................................................ 19 4.6 Upgrade by USB ...................................................................................................................... 20 4.7 Media Player .................................................................[...]

GENERAL INFORMATION A Digital Satellite Receiver is a convenient product that allows you to view a variety of programmes via satellite. This user guide covers the inst allation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in det ail, which will allow you to make ful[...]

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as r adiators, heat registers, stoves, or other app aratus (including amplifiers) that produce heat. 9. If the provided plug doesn’t fit into your outlet, consult an electrician for replacing of the [...]

Problem Possible causes What to do The display on the front panel does not light up Main cable is not connected. Check if the main cable is plugged into the power socket. No sound or picture, but the front panel shows a red light. The receiver is in stand-by mode. Press the stand-by button. No sound or picture. The satellite dish is not pointing at[...]

RCU Key Function T urns the DSR power ON/OFF When watching a channel, mutes the sound 0 ~ 9 Enter the number of the required menu item or select a channel number to search TV/RADIO Switches between TV and Radio mode PR Switches back to previous channel F A V Displays the favourite groups list SA T Displays the satellite window FIND Displays the Fin[...]

CONNECT TO POWER SUPPL Y AND EXTERNAL IR-SENSOR External IR-sensor CONNECT T O THE POWER SUPPL Y CONNECTING TO A USB DEVICE Satellite Dish USB or other removable device Note: Pictures are only for reference. 8[...]

INSTALLATION REAR P ANEL CONNECT T O A PC FOR S/W UPGRADE LNB IN: CONNECT TO LNB CONNECT T O A REMOV ABLE DEVICE CONNECT T O THE POWER SUPPL Y CONNECT T O AN INFRARED RECEIVER CONNECT TO A TV USING HDMI SUPPORT Satellite Dish CONNECT T O A TV USING AN HDMI CABLE TV Note: Pictures are for reference only . 9[...]

MENU INFORMATION MAIN MENU Make sure that you have properly installed and connected the receiver cables. If the receiver is in factory status or there is no progr amme list (when the power is on), the Main Menu window will be displayed on the screen. During the normal TV/Radio mode, press the MENU key on the RCU to enter into the Main Menu window .[...]

1 Edit Channels 1. Press the OK or key to pop up the “Input Password” dialogue box. Y ou cannot enter the menu unless the correct password is input. The default password is “0000”. 2. Press the PR+, PR- keys to move the cursor up or down. 3. Press the EXIT or key to move the selection to the left menu. 1.1 TV Channel list 1. Press the keys [...]

7. Press the blue key to enter the Edit channel window . i. Sort (red key) Press the red key to open the Sort drop-down list. Name (A-Z): The ascending order , omitting the $ Character . The numbers are at the beginning, then capital letters, and finally lowercase letters. Name (Z-A): The opposite order from the above Name (A-Z). Free/Scramble: All[...]

1.2 Radio Channel List Same operation as 1.1 TV Channel List. Please look there for operation. 1.3 Delete All Move cursor to Delete All Items, and pr ess the OK key to pop up the dialogue box “W arning! Do you really want to delete all channels?”. Press the EXIT key to pop up the dialogue box “Are you sure you want to save?”. Select the Y e[...]

4. Press the green key to pop up the satellite window . Since it’s the same operation as the above Edit Satellite Window , Please read there for operation instructions. 5. Press the blue key to pop up the dialogue box “Are you sure you want to delete?”. Select the Y es option and press the OK key to delete the selected satellite. Y ou can can[...]

Go to X: Press the OK key to open the drop-down list, select the proper position (reference or from 1 to 63), in order to activate the selected pos ition. West <Save> East: Press the key to turn west, or press the key to turn east. Press the OK key to pop up the dialogue box “Are you su re you want to change this satellite’s position?”.[...]

2.5 Multi Satellite Search From the Multi Satellite Search window you can search several satellites at the same time. 1. Satellite: All selected satellites in the satellite list window are displayed in the lower section. Y ou can press the keys to switch between them. 2. FT A Only: Press the keys to select between Y es and No. 3. Scan Channel: Pres[...]

5. Press the blue key to pop up the Search window . FT A only , Scan Channel, Network Search: Press the keys to select the proper option. Press the OK key to start searching. 3. System Setup 1. Press the OK or key to move the cursor to the right menu. 2. Press the PR+, PR- keys to move the cursor up or down. 3. Press the EXIT or key to move the sel[...]

screen. In the wakeup message, y ou can select between Birthday , Anniversary , General. At the same time the duration item will turn grey . 3. W akeup Date, On T ime: Use the numeric keys to input the valid date. Duration: Set the gap time. After waking up, system will power of f automatically after the duration time. Press the MENU or EXIT key to[...]

4.1 Information Press the OK key on the Information window . 4.2 Factory Setting Press the OK key to enter the Factory Setting window . Select the Y es option and press the OK key to return to the factory setting. All searched channels and set information will be erased. Select the No option and press the OK key to cancel this operation, or press t[...]

4.5.1 About CA Info In the About CA Info sub-menu, you can view the basic information about this conditional access such as Card S tatus, CAS System ID, Interface V ersion, Card Number , Number of sessions, Country Indicator , and Maturity Level. 4.5.2 Change PIN The Change PIN window is designed fo r changing the smart card’s PIN, which is requi[...]

Select the upgrade mode and upgrade file , then you can st art to upgrade by USB. 3. Press the OK key on the st art button to start receiving dat a from the USB device. When the USB device is not connected, this item is grey , and you cannot edit it. 4.7 Media Player The USB menu will be automatically s hown when inserting a U disk to the USB port [...]

4.8 Remove USB device safely Press OK on this item to pop up a dialogue box: “Y ou can safely remove the USB device now!”, then you can remove your USB device safely . 5. Game 1. Press the OK or key to open the game. 2. Press the PR+, PR- keys to move the cursor up or down. 3. Press the EXIT or key to move the selection to the left menu. 4. Sel[...]

7.2 EPG Press the EPG key to enter the EPG window . 1. Press the PR+, PR-, keys to select up or down, left or right. 2. Press the red key to pop up the Time Bar window . Press the PR+, PR- keys to select up or down, while pressing the keys to select left or right in the time bar . : Press the OK key on this button to return to the EPG window . : Pr[...]

7.10 OK 1. During viewing or listening, press the OK key to pop up the TV programme list or the Radio programme list. 2. Press the PR+, PR- keys to select the channel up or down, and then press the OK key to play this channel in full-screen. 3. Press the keys to select the satellite. 4. Press the MENU or EXIT key to close this window . 7.1 1 Audio [...]

6. Press the OK key on the star butt on to begin updating. Press the green key to delete the number or characters and press the red key to switch the input mode. 8.4 Weather forecast Press the green key to enter city Press the yellow key to delete city Press the red key to update 8.5 RSS reader RSS channel list is on the left side of the window . R[...]

Safety precautions: T o reduce risk of electric shock, this product should ONL Y be opened by an authorized technici an when service is required. Disconnect the product from mains and other equipment if a problem should occur . Do not expose the product to water or moisture. Maintenance: Clean the product only with a dry cloth. Do not use cleaning [...]

Declaration of conformity We, Nedis B.V ., De T weeling 28, 5215MC, ’s-Hertogenbosch The Netherlands T el.: 0031 73 5991055 Email: info@nedis.com Declare that product: Brand: KÖNIG ELECTRONIC Model: DVB-S2 REC20 Description: High definition DVB-S2 receiver Is in conformity with the following st andards: EMC: EN55013 : 2001+A1 : 2003+A2 : 2006 ; [...]