Makita 6221DW manual

Cordless Driver Drill Capacities Steel I Wood I Wood screw I Machine screw Equipped with Electric Brake MODEL 62211) MODEL 6221DW With Fast Charger weight I Net No load speed Dimensions IL x W x H) IRPM) INSTRUCTION MANUAL 10 mm (318") SPECIFICATIONS Model 6221D I I 15 mm 5.1 mm x 35 mm mm 1114,,1 202 mm x 50 mm x 218 mm 1.4 kg (518") 13/[...]

I M PORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7. 8. 9. IO. 11. 12. 13. 2 KEEP WORK AREA CLEAN. Cluttered areas and benches invite [...]

14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in. 16. EXTENSION CORDS. Make sure your extension cord is in good condition. When using [...]

VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN T[...]

IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE Length of Cord (Feet) AWG Size of Cord 1. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 contains important safety and operating instructions for battery charger. 2. Before using battery charger, read all instructions and cautionary markings on (1) battery charger, ([...]

ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents. 4. Always cover the battery terminals with the batte[...]

Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge *To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool. To insert the battery cartridge, align the tongue on the battery cartridge with the [...]

Installing or removing driver bit or drill bit CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. Hold the ring and turn the sleeve counter- clockwise to open the chuck jaws. Place the bit in the chuck as far as it will go. Hold the ring firmly and turn the sleeve clock[...]

Overload protector The overload protector automatically cuts out to break the circuit whenever heavy work is prolonged. Wait 20 - 30 seconds before resuming operation. CAUTION : Always withdraw the tool from the workpiece before resuming operation. If the tool cannot be withdrawn, hold the tool firmly when turning on the tool, to overcome a strong [...]

NOTE : 0 Make sure that the driver bit is inserted straight in the screw head, or the screw and/or bit may be damaged. 0 When driving wood screws, predrill pilot holes to make driving easier and to pre- vent splitting of the workpiece. See the chart. Drilling operation First, turn the adjusting ring so that the pointer on the adjusting ring points [...]

MAINTENANCE CAUTION : Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 11[...]

ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner. Drill dia. 1/16" 3/32" 1/8" 5/32[...]

Fast charger Model DC9700 Part No. 1 131 03-2 *Charger 12V for car Model DC9112 Part No. 1131 10-5 Fast charger Model DC1201 Part No. 113126.0 Battery cartridge 91 00 Part No. 19201 9-4 Battery cover Part No. 41 4938-7 Plastic carrying case 13[...]

Sep -08-'94 US CORDLESS DRIVER DRILL Model 6221D Note: The switch and other part configurations may differ from country to country. 14[...]

Sep-O8-'94 US MODEL 6221D ':NE," AtD DESCRIPTION 'r,'," ED DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 1 1 7 1 1 1 1 1 1 1 1 1 1 1 2 2 I 1 1 1 I - Housing Set [With Item 401 Name Plate Tapping Screw BT4x18 Battery Holder Switch Lever Switch Lever set Plate COmDWSSlOn Spring 27 COmpreSSlO[...]

P Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd 1 To recycle the battery: 1. Remove the battery from the tool. 2. a). or b). Take the battery to your nearest Makita Factory Service Center Take the battery to your nearest Makita Authorized Service Center or[...]