Miele CVA 5060 manual

Operating and installation instructions Built-in coffee machines CVA 5060 CVA 5068 To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 09 248 830 e n-G B[...]

Caring for the environment ..........................................5 Guide to the machine ..............................................6 Accessories supplied ..............................................8 Optional accessories ...............................................9 Warning and Safety instructions ....................................1 0[...]

Settings: Customising your machine ................................2 6 Settings menu ....................................................2 6 Selecting the language .............................................2 7 Setting the time of day ..............................................2 8 Setting the timer .............................................[...]

Cleaning and care ................................................4 7 Quick guide ......................................................4 7 Rinse the system ..................................................4 9 Milk pipework .....................................................4 9 Rinse milk pipework .............................................4 9[...]

Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal, and should be recycled. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation. Disposal of your old machi[...]

Exterior view a On/Off sensor for switching the coffee machine on and off b Display c Left arrow, for scrolling through the various programme options d OK sensor, for confirming the selection of a programme option and for saving a setting e Right arrow, for scrolling through the various programme options f Sensor for selecting hot water g Door grip[...]

Interior view a Master switch b Ground coffee chute cover c Ground coffee chute d Slide control to select fineness of ground coffee e Coffee bean container f Drip tray with grid for easier carrying g Water container h Brew unit i Waste container j Central spout connector (connecting the brew unit and the central coffee spout) k Stainless steel milk[...]

Stainless steel milk flask For storing and keeping milk cold, with lid (with handle) and additional cap ( not suitable for cleaning in a dishwasher) Containers Large and small containers for cleaning and rinsing the milk pipework Coffee spoon For adding the correct amount of ground coffee Cleaning agent for milk pipework For daily cleaning of the m[...]

Miele accessories and cleaning and conditioning products are available for your coffee machine. These can be ordered via the internet at www.miele-shop.com, from the Miele Spare Parts Department or from your Miele Dealer. Stainless steel milk flask with cap For storing and keeping milk cold ( not suitable for cleaning in a dishwasher) Cleaning agen[...]

This coffee machine conforms with all relevant legal safety requirements. Improper use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important information on installation, safety, use an[...]

Safety with children , Caution. The spouts present a danger of burning or scalding. Children's skin is very sensitive and reacts to hot temperatures. Do not allow them to touch hot components of the coffee machine or to put their hands under the spouts. ~ Place the coffee machine where it is out of the reach of children. ~ Children under 8 yea[...]

~ Do not connect the machine to the mains electricity supply by a multi-socket adapter or an extension lead. These do not guarantee the required safety of the machine (e.g. danger of overheating). ~ The second electrical connection socket on the back of the CVA 5060 coffee machine may only be used for connecting a Miele EGW 4000-14, EGW 4000-29 or [...]

Correct use , Caution. The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. – Do not touch hot components. – The spouts can spray hot liquid or steam. – Water in the drip tray can be [...]

~ Hot water and steam could cause scalding. Be very careful when using these functions. Make sure you do not come into contact with steam or hot water. The machine must not be used for cleaning objects. ~ Do not use a steam cleaner to clean this machine. Steam could reach electrical components and cause a short circuit. ~ Clean the machine every da[...]

The following notes should help you get to know your coffee machine before starting to use it. Controls This machine has sensor controls which react to touch. To operate the machine, you only need to touch the relevant sensor. There are five sensors: s On/Off sensor: For switching the machine on or off < > Left/right arrows: For scrolling thr[...]

When you use the machine for the very first time , you will be prompted to select a language . ^ Use the right or left arrow until the language you want appears in the display. ^ Touch the OK sensor. The language you have chosen is now set. The request to set the clock format will then appear. ^ Use the arrows to select the clock format you want (1[...]

The coffee machine must be cleaned thoroughly (see "Cleaning and care") before you fill it with water and coffee beans. It is vital that you programme in the water hardness level of your water (see "Settings: Customising your machine - Setting the water hardness"). Filling the water container The quality of the water plays an im[...]

Filling the coffee bean container Only put roasted espresso or coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Do not use coffee beans which have been treated with caramel, sugar or other substances. Do not put drinks containing sugar, or instant coffee in the machine. Sugar will damage the machine. ^[...]

Switching on When you switch the coffee machine on it will start heating up and the pipework will be rinsed through. This cleans and pre-heats the pipework in preparation for making coffee. ^ Touch the On/Off sensor s . The following message will then appear: Heating phase If the automatic Rinsing programme option has been set to "On" (fa[...]

Adjusting the height of the central spout The height of the central spout can be adjusted to suit the height of the cup so that the drink will not cool down as quickly as it would if the spout were further away from the cup. The crema will also be a better quality if the coffee does not have so far to go! ^ Slowly pull the central spout downwards. [...]

Double portion If you want to dispense a double portion of coffee or espresso or to dispense two portions at the same time: ^ touch the OK sensor a second time whilst "2 portions?" is in the display. The two portions will be dispensed one after the other . ^ To prepare two cups at the same time, place one cup under each jet. Cancelling pr[...]

If you not added any ground coffee, you must select "No". Otherwise the machine will assume that there is ground coffee in the chute, and only water will be dispensed the next time coffee is made! To make a drink ^ Place a cup under the central spout. ^ Touch the OK sensor. The machine will prepare espresso or coffee, which will then be d[...]

To make drinks with milk, ^ place the lid on the stainless steel milk flask by twisting it anticlockwise until it locks into place. ^ Open the machine door and hang the milk flask in the machine as illustrated, ensuring that the milk pipework is correctly engaged. ^ Close the machine door. Cappuccino, latte macchiato, hot milk, milk froth ^ Place a[...]

User profile drinks The User profile function is used to select the quantity of water and milk for your drink, as well as the fineness of the ground, temperature and pre-brewing to suit your taste and that of your guests (see "Setting up user profiles"). If you have set the machine up for a specific user profile you must first select the [...]

A good espresso or coffee with a thick, even crema depends not only on the quality, pressure and temperature of the water and the quality of the coffee beans, but also on the quantity of beans and how finely they are ground. The crema should have an even nut-brown colour with dark stripes running through it. You can set the amount of coffee beans t[...]

It is easy to customise your machine to suit your exact requirements. Settings menu To select the various programme options: Settings F qr HI J L n m C ^ Touch the right arrow sensor until "Settings F " appears in the display, and then touch the OK sensor. ^ Touch one of the arrow sensors until the option you want is highlighted. ^ Then t[...]

Water hardness: Soft 1, Medium 2, Hard 3, Very hard 4 Display: Contrast, Brightness Volume: Buzzer tones, Keypad tone Plate warmer (CVA 5060 only): Auto - matic, On, Off Showroom prog.: Demo programme, Off Factory default: All settings can be reset to the factory default, and user profiles deleted. To return to the previous option in the menu, sele[...]

Setting the time of day ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Time of day Timer ^ Touch the right arrow sensor until "Time of day" is highlighted and touch the OK sensor. There are three options: Display The Time of day display can be switched on or off. ^ Use the arrow sensors to sele[...]

Setting the timer ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Timer Coffee jug ^ Touch the right arrow sensor until "Timer" is highlighted and touch the OK sensor. ^ Select "Set" with the arrow sensors and touch the OK sensor. There are three options: Switch on at: You can choose a[...]

^ First set the hour with one of the arrow sensors. Touch the OK sensor. ^ Then use the arrow sensors to set the minutes. Touch the OK sensor. The machine will now switch off after the time you have set. If Automatic rinsing is set to "On" and the machine has been used for making drinks, it will automatically carry out a brief rinse befor[...]

Coffee jug (making several cups one after the other) This function can be used to make up to 8 cups of coffee automatically one after the other (max. 1 l). ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Coffee jug Prog. the amount ^ Touch the right arrow sensor until "Coffee jug" is highlighted[...]

^ Use the arrow sensor to select the drink that you wish to set the amount of coffee for and then touch the OK sensor. ^ Use the arrow sensor to set the amount to "more" or "less". ^ Touch the OK sensor to save the setting. Setting Pre-brewing When the Pre-brewing function is switched on, the freshly ground coffee is first moist[...]

^ Use the arrow sensors to highlight the temperature option. ^ Touch the OK sensor to save the setting. Setting Automatic rinsing The pipework is rinsed through automatically when the coffee machine is switched off if the automatic rinsing function is switched on and the coffee machine has been used for preparing drinks. The machine is delivered wi[...]

Lighting: Setting the brightness You can set how bright the lighting should be on the machine: ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Lighting Info ^ Touch the right arrow sensor until "Lighting" is highlighted, and then touch the OK sensor. ^ Select "Brightness", and then tou[...]

Info (showing the number of drinks) The "Info" option enables you to check how many drinks the machine has already dispensed or how many you can still dispense before it has to be descaled. ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Info Safety ^ Touch the right arrow sensor until "Inf[...]

To override the System lock ^ Touch the OK sensor for about 3 seconds. The machine is now temporarily unlocked and can be used to make drinks again. It locks itself as soon as the machine is switched off. Setting the water hardness For trouble-free operation of the coffee machine, and to ensure that the descaling reminder appears in the display at [...]

If the water is harder than 40°dH/7.0 mmol/l, limescale will build up more rapidy than with soft water. Descaling will need to be carried out more regularly than stated to prevent limescale damage to the machine. ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Water hardness Display ^ Use the arrow senso[...]

Setting the volume (keypad tone, buzzer) You can choose for a tone to sound each time a sensor is touched. The volume of the tone can also be adjusted: ^ Select "Settings F " from the Main menu, and then touch the OK sensor. Settings Volume Plate warmer ^ Touch the right arrow sensor until "Volume" is highlighted, and then touch[...]

On You can switch the plate warmer on and off manually whenever you want, independently of the coffee machine. Off The plate warmer will not switch on because the coffee machine is not supplying it with any electricity. The coffee machine is delivered with "Off" as the default setting. To switch the plate warmer on independently of the co[...]

All settings This option sets "All settings" back to the factory default. ^ Select "Reset" under "All settings", and touch the OK sensor. All settings are then reset to the default. If you select "Reset" by mistake, switch the coffee machine off: Resetting to the factory defaults will not be carried out. Fact[...]

The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. Not all espresso and coffee cups are the same size. To ensure the machine uses the right amount of water to suit your taste and your cups, you can programme the amount to use. With milky drinks the proportions of espress[...]

Programming the proportions for cappuccino or latte macchiato via the OK sensor ^ Place the appropriate cup or glass for the amount you want to programme under the spouts. ^ Select Cappuccino or Latte Macchiato. ^ Touch the OK sensor until the display shows the options for Cappuccino (Milk froth, Espresso) or Latte Macchiato (Hot milk, Milk froth, [...]

Programming the amount for hot water via the Hot water sensor ^ Place the appropriate cup for the amount you want to programme under the hot water spout. ^ Touch the Hot water sensor until "Prog. the amount" appears in the display. ^ Once sufficient water has flowed into the cup and "Save" shows in the display touch the Hot wate[...]

To cater for different tastes and preferences, you can enter up to 9 individual User profiles. For each User profile, you can select the following individual settings: – The amount of water for coffee-based drinks and hot water – The amount of milk for drinks with milk – The amount of coffee – The water temperature – Pre-brewing (See &quo[...]

Creating a User profile ^ Use the arrow sensors to highlight "Create", and then touch the OK sensor. You can allocate up to 9 User profiles. If you try to allocate more than 9 User profiles, " Memory full " will appear in the display and you will need to delete one name to create space. Letters and numbers will now appear in the[...]

Deleting a User profile If you want to delete the User profile completely, ^ Select "Delete User profile" using the OK sensor. ^ Use the arrow sensors to select the User profile you want to delete. ^ Touch the OK sensor. A tick will appear after the user profile and after a short while it will be deleted. Revert You can programme the mach[...]

Quick guide Clean the coffee machine every day to prevent a build-up of bacteria. Recommended frequency What do I have to do? Each time milk is used to make a drink, if more than one hour has passed since the last drink was made Rinse milk pipework Every day (usually at the end of the day, before the machine is switched off) Rinse the system (pipew[...]

Always allow the machine to cool down before cleaning. Please be aware that the water in the drip tray will be hot. Danger of scalding. Do not clean the machine with a steam cleaner as this will damage it. Do not use cleaners containing chlorides, acids, soda or scouring agents. These would damage the surface. It is important to clean the machine r[...]

Rinse the system Before switching the machine off for any length of time, the pipework, brew system and central spout need to be cleaned. If you have switched the automatic rinsing function off, you will need to rinse the system through manually. Place the smaller of the two containers under the central spout. Maintenance qr HI J L n m C ^ Touch th[...]

To rinse the milk pipework: Fill the larger of the two plastic containers to the "max" mark with cold water. Then fit the lid from the stainless steel milk flask making sure it engages properly. Clean milk pipework To prevent milk going off in the machine and the pipework getting clogged up it should be cleaned at the end of each day usin[...]

Clean milk pipework of any blockages If you are getting steam instead of milk from the central spout the milk pipework in the machine is probably blocked up. If the milk pipework in the lid is clogged, ^ use the cleaning brush to clean it under running water. Insert the brush into the pipework and move it back and forth as far as it will go until a[...]

^ Take hold of the second holder by pin ( c ) and pull it upwards and off. The hoses can now be cleaned with a brush under running water. ^ Push the brush into both milk pipes from below. Move the brush in and out of the pipes as far as it will go until there are no milk residues left in them. Re-assemble the milk pipework as follows: ^ Fit the hol[...]

Stainless steel milk flask with lid The stainless steel milk flask with lid must be washed by hand using hot water. It is important to keep the top of the flask and the seals clean (whilst filling it and carrying it). Any soiling can lead to a malfunction of the flask in the machine. ^ Clean the stainless steel flask with hot water after use to rem[...]

Central spout ^ Pull the central spout down as far as it will go ( a ), and pull the cover to the spout forwards to remove it ( b ). ^ Turn the cover around, push the insert up and out and then clean both parts thoroughly. ^ Slide the insert back into the cover until it clicks into place. ^ Pull out the jets in the central spout. ^ Remove the two r[...]

Water container Empty the water container daily and fill with fresh, cold tap water just before use. When cleaning, make sure that there is no soiling in the area around the valve. Otherwise the container will not sit correctly and this could result in water leaking from the machine. ^ The water container can be cleaned in the dishwasher or by hand[...]

Drip tray There is a sensor in the drip tray which causes a message to appear in the display when the drip tray is full and needs to be emptied. Remove the tray and empty and clean it when this message appears. However, to avoid a build-up of odours, the drip tray should be cleaned every day . After running the last rinse, you should leave the drip[...]

Coffee bean container The coffee bean container must be cleaned by hand with hot water and a little washing-up liquid. ^ Take the coffee bean container out of the machine and then push the lid back to remove it. ^ Clean the coffee bean container and the lid, and then dry them both thoroughly. ^ Replace the lid, and push the container back into plac[...]

Brew unit The brew unit must be cleaned once a week by hand and without using cleaning agent, because the moving parts are lubricated and the rubber seals could become brittle in a dishwasher. ^ Remove the water container, waste container and the coffee chute cover. ^ Press the light coloured button under the handle of the brew unit a and whilst do[...]

^ Press the light-coloured button under the handle of the brew unit a and whilst doing so turn the handle in the direction of the arrow b . Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit could become blocked. It should therefore be cleaned after approx. 200 portions have been prepared using the clean[...]

When prompted to Drop a cleaning tablet in the ground coffee chute , ^ remove the coffee chute cover and open the lid of the coffee chute. ^ Place a cleaning tablet into the coffee chute. ^ Close the lid, replace the coffee chute cover and close the machine door. ^ Follow the instructions in the display. When "Prog. finished" appears in t[...]

The machine should be descaled regularly to ensure that it functions correctly. It will remind you when this needs to be carried out. When only 50 portions can be made before the next descaling programme has to be run, the following message will appear in the display the first time: No. of portions until descaling: 50 . The remaining number of drin[...]

To run the descaling programme Maintenance qr HI J L n m C ^ Touch the right arrow sensor until "Maintenance" is highlighted, and confirm with OK, or , ^ If the machine is switched off, touch the OK sensor whilst the machine is switched off. ^ Select "Descale" and touch the OK sensor. ^ Select "Start" and touch the OK [...]

Repairs to electrical appliances should only be carried out by a suitably qualified and competent person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Various messages will appear in the display [...]

... the lighting suddenly switches itself off. If the machine has not been used for 15 minutes the lighting will switch itself off automatically. (See "Settings: customising your machine - Lighting: Setting the switch-off time"). ... the machine does not switch on even although the "Switch on at" setting for the timer has been a[...]

... a message appears in the display reminding you to fill or replace the milk flask even though it is full and positioned correctly. ^ Clean the flask thoroughly, paying particular attention to the area around the lid and the neck (see "Cleaning and care - Stainless steel milk flask with lid"). Any soiling in these areas can prevent the [...]

... you have selected a drink with milk and "Heating phase" appears in the display. The energy-saving Eco mode is active. In this mode, the steam system for preparing hot milk or milk froth has to heat up. After use the steam system will cool down again. Eco mode is the default setting but this can be deactivated, if wished (see "Set[...]

... water or milk stops flowing whilst programming in the amount to dispense. The flow stops automatically when the maximum fill quantity is reached. The maximum quantity is stored in memory. If there was not enough water or milk in the water container or milk flask, the amount that has been dispensed will not be saved to memory. ^ Fill the water c[...]

... no water comes out of the central spout. The filters in the brew unit are dirty. ^ Remove the brew unit and clean the filters with your finger (see "Cleaning and care - Brew unit"). ... the brew unit or the waste container cannot be pulled out of the machine. The brew unit is not in the correct position. This can happen if, for exampl[...]

... the slide control for the grinder setting will not move. ^ Close the machine door and dispense a cup of espresso coffee. The grinder setting slide control will now move. ... "Fault - 1" to "Fault - 4" or "Fault - 80" to "Fault - 83" appears in the display. ^ Switch off the machine using the On/Off sensor [...]

... the message "Check the brew unit" appears in the display. The brew unit may be dirty. ^ Follow the instructions in the display. ^ Clean the brew unit (see "Cleaning and care - Brew unit"). ^ Set a medium grinder setting and a medium amount of coffee (see "Setting the coffee grinder" and "Settings: customising [...]

In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer or – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes (UK only). When contacting your Dealer or Miele, please quote the model and s[...]

AItering the following settings from the factory default, will increase the energy consumption of the coffee machine: – Eco mode – Lighting – Time of day display – Timer – Connection of a plate warmer When altering these settings, the message "This setting increases energy consumption" appears in the display. You can save energy[...]

All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not su[...]

Building-in and combination options The machine is designed for installation in a tall unit. It can also be combined with other Miele built-in appliances. If the coffee machine is to be built in above another appliance, there must be a full-width, closed shelf between them (except when it is combined with a Miele built-in plate warming drawer). The[...]

Ventilation Ensure that the back of the coffee machine is sufficiently ventilated, so that steam and warm air can dissipate freely. The ventilation gaps in the furniture housing unit and the gap between the top of the housing unit and the ceiling must be at least 200 cm². Otherwise condensation can build up and damage the machine or the housing un[...]

If it is not: ^ realign the machine by adjusting the four feet. The feet can be unscrewed by up to approx. 10 mm. ^ Connect the machine to the electricity supply. ^ Push it all the way into the niche until you feel resistance. ^ Open the door of the machine, and partially tighten the side socket screws. ^ Carefully turn the lower socket screws a to[...]

77[...]

78[...]

79[...]

Alteration rights reserved / 4112 CVA 5060, CVA 5068 M.-Nr. 09 248 830 / 01[...]