Optoma DW339 manual

1 English T able of Contents ............................ 1 Usage Notice ................................... 2 Safety Information ....... ........................2 Precautions .........................................3 Eye Safety Warnings ...... ....................5 Product Features ...... ..........................5 Introduction .................[...]

2 English Usage Notice Safety Information The lightning ash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons. The exclamation point within an eq[...]

3 English Usage Notice Precautions Please follow all warnings, precautions and maintenance as recommended in this user ’s guide. ▀ ■ W arning- Do not look into the projector ’s lens when the lamp is on. The bright light may hurt and damage your eyes. ▀ ■ W arning- T o reduce the risk of re or electric shock, do not expose this projec[...]

4 English Usage Notice Do:    Turn of f and unplug the power plug from the AC outlet before cleaning the product.    Use a soft dry cloth with mild detergent to clean the display housing.    Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Do not:    Block the s[...]

5 English Usage Notice Eye Safety W arnings ▀ ■ Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible. ▀ ■ When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀ ■ In order to minimize the lamp power, us[...]

6 English Introduction  Due to different applications in each country , some regions may have different accessories. Power Cord Package Overview Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact your nearest customer service center . 2 × AAA Batteries Projector VGA Ca[...]

7 English Introduction Product Overview Main Unit 1. Control Panel 2. Focus Ring 3. Speaker 4. Zoom Ring 5. Lens 6. IR Receiver 7. Input / Output Connections 8. Power Socket 9. T ilt-Adjustment Feet 10. V entilation (inlet) 1 1. V entilation (outlet) 3 8 1 4 9 7 10 5 6 2 10 11  The interface is subject to model’s speci - cations.[...]

8 English Introduction / / Control Panel 2 3 1 7 1. Power LED 2. Lamp LED 3. T emp LED 4. Enter / Help 5. Menu 6. Re-Sync 7. Keystone Correction 8. Four Directional Select Keys 9. Source 10. Power/Standby button 5 10 6 9 8 4[...]

9 English Introduction AUDIO -IN AUDIO OUT VGA1- IN / YPbPr RS-232C VGA-O UT VGA2- IN / YPbPr HDMI S-VID EO VIDEO USB Input/Output Connections  Monitor loop through only sup - port in VGA1-In/ YPbPr . 1. USB Connector (Connect to PC for Remote Mouse func - tion) 2. HDMI Connector 3. Composite Video Input Connector 4. S-V ideo Input Connector [...]

10 English Introduction Remote Control  The interface is subject to model’s speci - cations. 1. LED Indicator 2. Power On/Of f 3. Source 4. Mouse Left Click 5. Enter 6. Four Directional Select Keys / Mouse control 7. Switch 8. Re-Sync 9. Mouse Right Click 10. Page Up 1 1. Page Down 12. V olume +/- 13. Menu 14. Zoom 15. A V mute 16. Video[...]

11 English Installation Connecting the Projector  Due to the difference in applications for each country , some regions may have different accessories.  (*) Optional accessory AUDIO-IN AUDIO OUT VGA1-IN / YPbPr RS-232C VGA-OUT VGA2-IN / YPbPr HDMI S-VIDEO VIDE O USB m o l ex MOLEX E62405SP R 1 2 4 1......................................[...]

12 English Installation Connect to Video Sources  Due to the difference in applications for each country , some regions may have different accessories.  (*) Optional accessory AUDIO-IN AUDIO OUT VGA1-IN / YPbPr RS-232C VGA-OUT VGA2-IN / YPbPr HDMI S-VIDEO VIDE O USB E62405SP R 1...........................................................[...]

13 English Installation Powering the projector On / Off  Turn on the projector rst and then select the signal sources. Powering On the Projector 1. Remove th e lens cap. (optional)  2. Securely connect the pow er cord and signal cable. When connected, the POWER/ST ANDBY LED will turn Amber . 3. T urn on the lamp by pressing “ ” butt[...]

14 English Installation  Contact the nearest service center if the projector displays these symptoms. See pages 60-61 for more information. W arning Indicator When the warning indicators (see below) come on, the projector will automatically shutdown:  “LAMP” LED indicator is li t red and if “POWER/ST ANDBY ” indicator ashes ambe[...]

15 English Installation Adjusting the Projected Image Adjusting the Projector ’ s Height The projector is equipped with elevator feet for adjusting the image height. 1. Locate the adjustable foot you wish to modify on the underside of the projector . 2. Rotate the adjustable ring clockwise to raise the projector or counter clockwise to lower it. [...]

16 English Installation Adjusting the Projector ’ s Zoom / Focus Y ou may turn the zoom ring to zoom in or out. T o focus the im - age, rotate the focus ring until the image is clear .  SVGA/XGA series: The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters).  WXGA series: The projector will focus at distances from[...]

17 English Installation SVGA/XGA  This table is for user ’s reference only .  This table is for user ’s reference only . WXGA Diagonal length (inch) size of 4:3 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (feet) Width Height Width Height wide tele wide tele (m) (feet) 30.00 0.61 0.46 24.00 18.00 1.19 1.31 3[...]

18 English User Controls Control Panel Control Panel & Remote Control / / Using the Control Panel POWER Refer to the “Power On/Off the Projector” section on pages 13-14. RE-SYNC Automatically synchronize the projector to the input source. Enter / Help / Conrm your item selection. Help Menu (only available when OSD menu is not shown). SOU[...]

19 English User Controls Remote Control Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 13-14. L Button Mouse left click. R Button Mouse right click. Page + Use this button to page up. Page - Use this button to page down. Enter Conrm your item selection. Source Press “Source” to select an input s[...]

20 English User Controls Using the Remote Control Freeze Press “Freeze” to pause the screen image. Press this button again to unlock. A V mute Momentarily turns off/on the audio and video. S-Video Press “ S-Video ” to choose S-V ideo source. VGA Press “VGA” to choose VGA sources. Video Press “Video” to choose Composite video source.[...]

21 English User Controls Using the HELP button The HELP function ensures easy setup and operation.  Press the “?” button on the remote control or press the “HELP” button on the control panel to open the Help Menu. / /[...]

22 English User Controls  Please refer to the “T roubleshooting” section on pages 44-48 for more details.  Help menu button functions only when no input source is detected.  If input source is detected and help button is pressed, th e following pages will appear to help diagnose any problems.[...]

23 English User Controls[...]

24 English User Controls On-screen Display Menus The Projector has multilingual On-screen Display menus that allow you to make image adjustments and change a variety of settings. How to operate 1. T o open the OSD menu, press “Menu” on the Remote Control or Projector Keypad. 2 When OSD is displayed, use keys to select any item in the main menu.[...]

25 English User Controls Menu T ree EW556 OSD Menu Tree.xls Main Menu Sub Menu S ettings Image Display Mode Brightness -50~50 Contrast -50~50 Sharpness 1~15 Color -50~50 Tint -50~50 Advanced Gamma 0~10 Color Temp. Warm / Medium / Cold Color Settings Color Space AUTO / RGB / YUV AUTO / RGB (0-255) / RGB (16-235) / Y UV Input Source VGA1 / VGA2 / Vid[...]

26 English User Controls EW556 OSD Menu Tree.xls Main Menu Sub Menu S ettings Setup Projector ID 0~99 Mute On / Off Volume 0~10 Advanced Logo Default / Neutral Closed Captioning Off / CC1 / CC2 Exit Options Source Lock On / Off High Altitude On / Off Information Hide On / Off Keypad Lock On / Off Test Pattern None / Grid / White Pattern Background [...]

27 English User Controls IMAGE Display Mode There are many factory presets optimized for various types of images.  Presentation: Good color and brightness from PC input.  Bright: Maximum brightness from PC input.  Movie: For home theater .  sRGB: Standardised accurate color .  Blackboard: This mode should be selected to achieve optim[...]

28 English User Controls Sharpness Adjust the sharpness of the image.  Press the to decrease the sharpness.  Press the to increase the sharpness. Color Adjust a video image from black and white to fully saturated color .  Press the to decrease the amount of saturation in the image.  Press the to increase the amount of saturation in the [...]

29 English User Controls IMAGE | Advanced Gamma This allows you to choose a degamma table that has been ne-tuned to bring out the best image quality for the input.  Film: for home theater .  Video: for video or TV source.  Graphics: for image source.  Standar d: for PC or computer source. BrilliantColor™ This adjustable item utiliz[...]

30 English User Controls Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255) (*) ,RGB(16-235) (*) or YUV . Input Source Use this option to enable / disable input sources. Press to enter the sub menu and select which sources you require. Press “Enter” to finalize the selection. The projector will not search for inputs [...]

31 English User Controls DISPLA Y Format Use this function to choose your desired aspect ratio. SVGA/XGA  4:3: This format is for 4×3 input sources.  16:9-I: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV . (576i/p)  16:9-II: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide[...]

32 English User Controls WXGA  4:3: This format is for 4×3 input sources.  16:9: This format is for 16×9 input sources, like HDTV and DVD enhanced for Wide screen TV .  16:10: This format is for 16×10 input sources, like widescreen laptops.  LBX: This format is for non-16x9, letterbox source and for users who use external 16x9 lens t[...]

33 English User Controls Edge Mask Edge mask function removes the noise in a video image. Edge mask the image to remove video encoding noise on the edge of video source. Zoom  Press the to reduce the size of an image.  Press the to magnify an image on the projection screen. H Image Shift Shift the projected image position horizontally . V Ima[...]

34 English User Controls 3D Mode  Off: Select “Of f” to turn 3D settings off for 3D images.  DLP Link: Select “DLP Link” to use optimized settings for DLP Link 3D images.  IR: Select “IR” to use optimized settings for IR-based 3D images. 3D Sync. Invert  Press the “On” to invert left and right frame contents.  Press t[...]

35 English User Controls SETUP Language Choose the multilingual OSD menu. Press or into the sub menu and then use the or key to select your preferred language. Press “Enter” to nalize the selection. Projection  Front-Desktop This is the default selection. The image is projected straight on the screen.  Front-Ceiling When selected, the [...]

36 English User Controls  Rear-Ceiling When selected, the image will appear reversed in upside down position. Menu Location Choose the menu location on the display screen. Screen T ype Choose the screen type from16:10 or 16:9. Projector ID ID denition can be set up by menu (range 0-99), and allow user control an individual projector by RS232.[...]

37 English User Controls SETUP | Signal (RGB) Automatic Automatically selects the signal. If you use this function, the Phase, frequency items are grayed out, and if Signal is not auto - matic, the phase, frequency items will appear for user to manually tune and saved in settings after that for next time projector turns off and on again. Phase Sync[...]

38 English User Controls SETUP | Security Security  On: Choose “On” to use security verication when the turning on the projector .  Off: Choose “Of f” to be able to switch on the projector without password verication. Security T imer Use thi s func tio n to set the how l ong (M onth /Day/H our) the proj ecto r can b e used. On c[...]

39 English User Controls  If the i nco rre ct pas sword is e ntered 3 tim es, th e proje ctor w ill automat ica lly shut dow n.  If you have forgotten your password, please contact your local ofce for support.[...]

40 English User Controls SETUP | Advanced Logo Use thi s func tio n to set the de sired st ar tup s cree n. If chan ges ar e made t hey will ta ke effe ct the n ext tim e the pr ojec tor is powe red on.  Default: The default startup screen.  Neutral: Logo is not displayed on startup screen. Closed Captioning Use thi s func tio n to set the de[...]

41 English User Controls Source Lock  On: The projector will only search current input connection.  Off: The projector will search for other signals if the current input signal is lost. High Altitude When “On” is selected, the fans will spin faster . This feature is useful in high altitude areas where the air is thin. Information Hide [...]

42 English User Controls OPTIONS | Advanced Direct Power On Choose “On” to activate Direct Power mode. The projector will automatically power on when AC power is supplied, without pressing the “ ” key on the projector control panel or on the remote control. Auto Power Of f (min) Sets the countdown timer interval. The countdown timer will st[...]

43 English User Controls OPTIONS | Lamp Settings Lamp Hours Display the projection time. Lamp Reminder Choose this function to show or to hide the warning message when the changing lamp message is displayed. The message will appear 30 hours before suggested replacement of lamp. Brightness Mode  BRIGHT : Choose “BRIGHT” to increase the bright[...]

44 English Appendices No image appears on-screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure all the pins of connectors are not bent or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing the lamp”[...]

45 English Appendices 7. Click on “Show all devices”. Next, select “Standard monitor types” under the SP box; choose the resolution mode you need under the “Models” box. 8. V erify that the resolution setting of the monitor display is lower than or equal to UXGA (1600 × 1200).  If you are using a Notebook: 1. First, follow the steps[...]

46 English Appendices Image is out of focus  Make sure the lens cap is removed.  Adjust the Focus Ring on the projector lens.  Make sure the projection screen is between the required distance. See page 17. The image is stretched when displaying 16:9 DVD title  When you play anamorphic DVD or 16:9 DVD, the projector will show the best im[...]

47 English Appendices The projector stops responding to all controls  If p ossible, turn of f the projector , then unplug the power cord and wait at least 60 seconds before reconnecting power .  Check that “Keypad Lock” is not activated by trying to control the projector with the remote control. Lamp burns out or makes a popping sound [...]

48 English Appendices On Screen Messages  T emperature warning:  Fan failed:  Lamp warning:  Out of display range: If the remote control does not work  Check the operating angle of the remote control is within ±15° both horizontally and vertically of one of the IR receivers on the projector .  Make sure there are not any obstruc[...]

49 English Appendices Replacing the lamp The projector automatically detects the lamp life. When the lamp life is nearing the end of use, you will receive a warning message. When you see this message, please contact your local reseller or service center to change the lamp as soon as possible. Make sure the projector has been cooled down for at l ea[...]

50 English Appendices Lamp Replacement Procedure: 1. Switch off the power to the projector by pressing the “ ” button. 2. Allow the projector to cool down for at least 30 minutes. 3. Disconnect the power cord. 4. Unscrew the one screw on the cover . 1 5. Lift up and remove the cover . 2 6. Unscrew the two screws on the lamp module. 3 7. Lift up[...]

51 English Appendices  For widescreen resolution (WXGA), the compatibility support is dependent on Notebook/PC models.  120Hz input signals may be dependent on graphics cards support.  Please note that using resolu- tions other than native 800 x 1024 (SVGA), 1024 x 768 (XGA model), 1280 x 800 (WXGA model) may result in some loss o[...]

52 English Appendices Mode Resolution Anglog/Digital SVGA/ XGA WXGA H-Sync (KHz) V -Sync (Hz) XGA 1024 × 768 60.00 75 V V XGA 1024 × 768 68.70 85 V XGA 1024 × 768 - 120 V 1 152 × 864 - 60 V 1 152 × 864 - 70 V 1 152 × 864 - 75 V 1 152 × 864 - 85 V 1 152 × 870 - 75 V V HD720 1280 x 720 - 50 V HD720 1280 x 720 - 60 V HD720 1280 x 720 - 75 V HD[...]

53 English Appendices Video Compatibility Computer Compatibility Mode Resolution V -Sync (Hz) H-Sync (KHz) MAC LC 13” 640 × 480 66.66 34.98 MAC II 13” 640 × 480 66.68 35.00 MAC 16” 832 × 624 74.55 49.73 MAC 19” 1024 × 768 75 60.24 MAC 1152 × 870 75.06 68.68 MAC G4 640 × 480 60 31.35 i MAC DV 1024 × 768 75 60.00 i MAC DV 1152 × 870 7[...]

54 English Appendices RS232 Pin Assignments RS232 Commands and Protocol Function List  RS232 shell is grounded. Pin no. Spec. (from projector side) 1 N/A 2 RXD 3 TXD 4 N/A 5 GND 6 N/A 7 N/A 8 N/A 9 N/A 1 2 3 4 5 6 7 8 9[...]

55 English Appendices RS232 Protocol Function List Baud Rate : 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control : None UART16550 FIFO: Disable Projector Return (Pass): P Projector Return (Fail): F 1. There is a <CR> after all ASCII commands. 2. 0D is the HEX code for <CR> in ASCII code. XX=00-99, projector's ID, XX=00 is fo[...]

56 English Appendices ----------------------------- --------------------------------------------- ------------------------------------------------ ------------------------------------------------------------ --- -------------------------------- -- ~XX45 n 7 E 30 30 34 34 20 a 0D Color (Saturation) n = -50 ( a=2D 35 30) ~ 50 (a=35 30) ~XX44 n 7E 30 [...]

57 English Appendices ----------------------------- --------------------------------------------- ------------------------------------------------ ------------------------------------------------------------ ------------------------------------- (for ES 556/EX555/EX 556/EW556) ~XX80 1 7E 30 30 38 30 20 31 0D Mute On ~XX80 0 7E 30 30 38 30 20 30 0D [...]

58 English Appendices ----------------------------- --------------------------------------------- ------------------------------------------------ ------------------------------------------------------------ ------------------------------------- READ from projector (telnet supported) ----------------------------- -----------------------------------[...]

59 English Appendices  Please note that damage resulting from incorrect installation will void the warranty . W all Mount Installation 1. T o prevent damage to you r projector , please use the Optoma ceiling mount. 2. If you wish to use a third party ceiling mount kit, please ensure the screws used to attach a mount to the projector meet the [...]

60 English Appendices Optoma Global Ofces For service or support please contact your local ofce. USA 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Canada 2420 Meadowpine Blvd., Suite #105 888-289-6786 Mississauga, ON, L5N 6S2, Canada 510-897-8601 www .optoma.ca services@optoma.com [...]

61 English Appendices Benelux BV Randstad 22-123 +31 (0) 36 820 0253 1316 BW Almere +31 (0) 36 548 9052 The Netherlands www .optoma.nl Latin America 3178 Laurelview Ct. 888-289-6786 Fremont, CA 94538, USA 510-897-8601 www .optomausa.com services@optoma.com Korea WOOMI TECH.CO.,L TD. 4F ,Minu Bldg.33-14, Kangnam-Ku, +82+2+34430004 seoul,135-815, KOR[...]

62 English Appendices Regulation & Safety Notices This appendix lists the general notices of your projector . FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a r[...]

63 English Appendices Disposal instructions Do not throw this electronic device into the trash when discarding. T o minimize pollution and ensure utmost protection of the global environment, please recycle it. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This devic[...]