Palsonic 3410P manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 34CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 3410P OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957[...]

MFT (Manual Fine Tuning)...................9 Tuning in..............................................7 Channel selection......................................11 Convenient Picture Controls...................12 Convenient Sound Controls.....................13 Remote controller...................................5 Back view.............................[...]

English/Chinese on-screen menu display INTRODUCTION Features Hyperband 100 preset channels Auto-search, manual search Intellectualized I C-bus control Sleep timer, Auto Power-Off & blue background display Four picture modes’ setting AUDIO/VIDEO input & output terminals Advanced picture improvement circuit 1. Built-in digital comb filter ([...]

NOTES FOR OPERATION Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. Please follow[...]

Effective range of the remote control operation Antenna Connection (1) Remove the back battery cover. Installation To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial[...]

Front view Back View Appearance Note: Functions of MENU, TV/AV, VOL , CH are also provided to the remote controller. 4[...]

Remote Controller Appearance 5[...]

To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. . Turning the Power On/Off OPERATION TV/AV button on the set to turn on the TV. *Note: If there are no input signals to the TV when the TV set is on, a blue background will 4. If you want to turn off the TV temporarily, press the button on the remote controller t[...]

. OPERATION Tuning in First, use the AUTO SEARCH function to preset all the active channels in your local area automatically. Then, arrange the preset channels with the MANUAL SEARCH, MFT (Manual Fine Tuning) and SKIP functions so that you can tune into only desired channels. There are two ways to preset channels: to preset channels automatically a[...]

. . OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO- SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions. Manual search If AUTO SEARCH [...]

OPERATION To skip a position number After presetting the channels, you can skip unnecessary position numbers so that only the channels you want to watch are selected. 1. Enter into the POS. MEMORY menu, select and highlight POSITION , then select the unwanted program number with the or button. 2. Press the or button to move the cursor to "SKIP[...]

Tuning in (continued) OPERATION COLOR AUTO 1. Press the SYS button, the colour system will be displayed on the screen. time you press the or button, the colour 2. If the colour is abnormal, press the or button to select the proper colour system. Every system will change in the sequence below. AUTO Now you can watch the broadcasting TV program at th[...]

"-" and 0-9 to select a number (0-9). . . . OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. You can select your desired TV program by one of the following methods. Using the direct select buttons To select a one-digit position number, press the -/-- button to display To select a two-digit po[...]

PICTURE COLOR 50 BRIGHT 50 CONT 100 SHARP 50 BB ON SELECT ADJUST sharper softer *TINT Selectable picture OPERATION Convenient Picture Controls Item To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press the P.S button to select the desired picture quality. MEMORY1 MEMORY2 MEMORY[...]

!!!!!!!..... Adjusting the volume and muting the sound OPERATION Convenient Sound Controls To adjust the sound volume Adjust the sound volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound. To mute the sound The muting function is convenient when you need to pay attention to surrounding [...]

1. Press the MENU button repeatedly until the LANGUAGE SLEEP:30MIN. Sleep timer and to select the language for the OSD OPERATION Other functions Making use of the Sleep timer function allows you to have the set automatically turned off after a preset time. Press the SLP button every time, the time displaying on the screen will change in the sequenc[...]

. CONNECTING OTHER EQUIPMENT External Equipment Connections The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well. To connect AV input terminals You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture[...]

. . . . . . . . . . . . X~Z+2, S1-S41 430 (W) x 370 (D) x 336 (H) <60W Dimensions (mm): Weight (kg): PAL-B/G OTHERS Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Spots appear on the screen Stripes appear on the screen Double images or “ghosts?[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-14H53-06[...]