Palsonic 8110Y manual

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 81CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 8110Y OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N1589[...]

Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ f[...]

1 Hyperband 256 preset channels Automatic channel preset Intellectualized I 2 C-bus control English/Chinese on-screen display Full function remote control AV input & output terminals Clock/Game/Calendar Four picture modes Four sound modes ON timer/OFF timer Surround sound Channel scan Channel edit . . . . . . . . . . . . . . Introduction Main f[...]

2 Important Safety Precautions Introduction Safety Precautions When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. When cleaning dust off the picture tube disconnect the power first. You can wipe lightly with a piece of dry, clean a[...]

Don't overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 3 This TV set can operate on a power of ~240V, 50Hz. You must not use a power supply of any other type. Do not cover the ventilating hole in the cabinet Keep a space of more than 10cm from the walls to the T[...]

4 Front Identification of Controls Introduction Front/Back view Back VOLUME MENU CHANNEL TV/AV R VIDEO L/MONO AUDIO (3) MONITOR S-VIDEO (2) DVD AUDIO AUDIO R VIDEO L/MONO R L/MONO VIDEO B R C Y C AUDIO R L (1) TV/AV Channel down Channel up Volume down Volume up MENU POWER SWITCH AV 3 input (VIDEO, AUDIO: L/MONO, R) DVD input (VIDEO: Y,C B , C R , A[...]

5 Remote control 1 2 3 4 5 6 7 8 9 0 M ENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Sound mute Channel scan Recalling On-screen display Channel up/down Menu item select Sleep timer Channel edit MENU control buttons Game control buttons Power on/standby TV/VIDEO input select Direct channel select Previous program MENU Volume up/dow[...]

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and p[...]

Install two "AAA" batteries matching the +/- polarities of the battery to the +/- marks inside the battery compartment. Replace the battery cover. When there is an obstacle between the TV and the transmitter, the transmitter may not operate. When direct sunlight, and incandescent lamp, fluorescent lamp or any other strong light shines on [...]

You can connect video equipment such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special (S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (RCA). The S-VIDEO and AV1 use the same group of audio i[...]

The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disc Player, etc. 9 To connect DVD input terminals : Direction of signal Another VTR for recording To video input To audio inputs To external input :Yellow (video) :White (audio L/MONO) :Red (audio R) MONITOR S-VIDEO (2) DVD AUDIO AUDIO R VIDEO L/MO[...]

1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Turning off Turning on 3 2 1 10 2 1 Turning on/off Operations Turning on/off Press the Power Switch on the TV set, the red indicator lights up, the set is in standby mode. Press the button on the remote control and the TV set is turned on. In STANDBY mode, you can a[...]

Operations Select input signal Select input signal Watching AV program This TV set provides AV input terminals for your convenient connection to VCR, DVD or other video equipment. To watch video program from AV inputs, Press AV button repeatedly until you see the appropriate input indicator on the screen. When S-VIDEO terminal is used, the OSD (on-[...]

1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Manual search Auto search 3 2 1 12 If you have preset the channels, you can directly watch TV programs after turning on the set. If not, then preset channels in one of the following ways. Enter into TUNING menu. Press CH+/- to select AUTO MEMORY . Press VOL+ to star[...]

13 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN 3 2 1 Press MENU button. Press VOL+/- to select TUNING icon. Press CH- to enter into TUNING menu. 3 2 1 To skip an unnecessary channel Press VOL+ to search towards higher frequency, the screen displays glittering " " press VOL- to search toward lower fr[...]

1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN The setting of colour and sound system Fine tuning 3 2 1 14 2 1 Tuning in (continued) Operations Fine tuning/The setting of colour and sound system Fine tuning is not necessary under normal conditions. However, in area of inferior broadcast conditions where adjustme[...]

Operations Channel selection Making use of direct select buttons Use direct selection buttons 15 3 2 1 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN To select one-digit channel Method 1: press 0-9 button and wait for 2 seconds. Method 2: press 0 button twice, and then press the channel number. Be sure the perio[...]

Channel scan Use Previous channel button 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Use Channel up/down buttons 3 2 1 16 3 2 1 4 Channel selection (continued) Operations Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit Channel edit Press CH+ button, the channel number i[...]

CONTRAST BRIGHT COLOR SHARP NOISE REDU. 40 50 50 50 OFF PICTURE TIMER SOUND TUNING SETUP SELECT ADJUST ON/OFF Adjusting picture Picture quality Display more brightness and contrast pictures Display normal pictures Display mild pictures The picture quality you set Mode BRILLIANT STANDARD SOFTNESS PERSONAL Operations Picture adjustment Picture adjust[...]

1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN 1 18 Sound adjustment Operations Sound adjustment Use VOL+ or VOL- button. Press VOL+ button, the volume increases; Press VOL- button, the volume decreases. If you want to mute the sound, press button on the remote control. To restore the sound, press this button ag[...]

BASS +16 VOL+ Stronger Stronger Decrease the left channel THEATRE NEWS MUSIC PERSONAL Adjusting sound 19 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Press MENU button. Press VOL+ or VOL- button to select SOUND icon. Press CH- to enter into SOUND menu. In SOUND menu press CH+/- to select desired item, press VO[...]

Press VOL+/- to select English or Chinese ( ) 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Menu demonstration Selecting OSD language 3 2 1 20 3 2 1 System setup Operations System setup Press MENU button. Press VOL+ or VOL- to select SETUP icon. Press CH- to enter into SETUP menu. Press CH+/- to select LANGUAGE[...]

Setting Blue Background option 21 3 2 1 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Enter into SETUP menu. Press CH+/- to select B.B. Press VOL+/- to select On or Off . If the B.B is set to On , the TV set will display a blue background when there is no input signal. If the B.B is set to Off , the TV will dis[...]

Setting ON timer 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Setting clock 3 2 1 22 3 2 1 Timer setting Operations Clock/ON timer/OFF timer/Sleep timer You can press DSP button twice to display the current time of the TV set, press again to cancel. Enter into TIMER menu. Press CH- to select CLOCK . Press VOL+[...]

With the OFF timer. the TV will automatically switch to standby mode at a preset time. Setting OFF timer 23 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN 4 3 2 1 Press MENU button. Press VOL+/- to select TIMER icon. Press CH- to enter into TIMER menu. In TIMER menu, press CH+/- to select OFF TIMER . Press VOL+ [...]

SCORE : 000 1 2 3 4 5 6 7 8 9 0 MENU CH CH VOL VOL AV DSP EDIT SLEEP SOUND PIC GAME SYSTEM SCAN Making use of Submarine Making use of Falling cube 24 3 2 1 4 Playing games Operations Playing games There are two built-in games for you to play: one is Falling cube, the other is Submarine. Press GAME button once to enter into Falling cube game interfa[...]

Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Unevenness in colour in some parts of the screen When the set is switched on, do not shift or move the set around. Sometimes it may develop an unevenness in colour in some parts of the screen. This can be eliminated by switch[...]

TV system & channel range Power Supply: Power Consumption: Dimensions (mm): Weight (kg): CRT: ~240V, 50Hz 150W 860 (W) x 688.5 (H) x 608 (D) 63 81cm System PAL-B/G VHF 2-12 UHF 21-69 CATV X~Z+2,S1~S41 Colour System: Sound output: Accessories: PAL-B/G NTSC (AV) 6W x 2 Remote controller X 1 Design and specifications are subject to change without [...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-W3483-00[...]