Yamaha HTY-750 manual

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCAR BOROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB OURG 7731[...]

CAUTION: READ THIS BEFORE OPERATING THIS UNIT. i En 1 T o assur e the finest perform ance, please r ead this manua l carefull y . Keep it in a safe pl ace for fut ure refere nce. 2 Install thi s sound system in a well ve ntilated, co ol, dry , clean place with at lea st 5 cm (2 in) of space ab ov e (or belo w) this unit – aw ay from direc t sunli[...]

PREP ARA TION INTRODUCTION BA S I C OPERA TION AD V ANC ED OPERA TION ADDITIONAL INFORMA TION SETUP English 1 En Overview ............. ............ .......... ............ ............ ....... 2 Featur es ..... ............ ......... ............. ............ ......... ....... 3 Using th is manual .................... .......... ............ ....[...]

Overvi ew 2 En It is generally accepted that in order to fully enjoy the benef its of su rround sound at home, you must endure the agon y of wiring and installing a great number of spea kers in the hop e that your listening room will gi ve you the same kind of surround sound experience as your local mo vie theater . Y amaha HTY -750 Digital Sound P[...]

Features 3 En INTRODUCTION English Digital Sound Projector™ The Digital Sound Projector te chnology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surr ound sound, thus eliminates the need for satell ite loudsp eakers and cabling normally associated with con venti onal surround sound systems. This u[...]

Features 4 En The “ ” logo and “IntelliB eam” are trademarks of Y AMAHA Corporation. Manufactured under licen se from Dolby Laborator ies. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “Neo:6” are registered trademarks of DTS, Inc . Manufactured und er license from 1 Ltd. W orl[...]

Using this manual 5 En INTRODUCTION English • This manual describes how to connect and operate this unit. Fo r details regarding the operation of external compon ents, refer to the supplied owner’ s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified. • y ind[...]

Supplied accessories 6 En Check that you hav e recei ved all of the follo wing parts. Supplied accessories STEREO MY SUR. MY BEAM SLEEP INPUTMODE CH LEVEL MENU RETURN TEST TV VOL VOLUME MUTE TV INPUT TV MUTE ENTER SUR. DECODE CODE SET 5BEAM ST+3BEAM 3BEAM VOL MODE AU TO SETUP MACRO TV INPUT2 INPUT1 YSP TV/A V CH 4 6 3 2 1 VCR DVD TV STB AUX TV POWE[...]

Controls and functions 7 En INTRODUCTION English 1 INTELLIBEAM MIC jac k Connect the supplied IntelliBeam microphone for A UTO SETUP (see page 32). 2 Fro nt panel displa y Shows in formation about the operational status of this unit. 3 Remote control sensor Receiv es infrared signals from the remote control. 4 INPUT Press repeatedly to switch betwe[...]

Controls and functions 8 En 1 SRS T r uBass indicator Lights up when Tru Bass is turned on (see page 63). 2 EQU AL indicator Lights up when the TV volume equal mode is selected (see page 53). 3 NIGHT indica tor Lights up when one of the night listening enhancers is selected (see page 53). 4 SLEEP indicator Lights up when the sleep timer is set (see[...]

Controls and functions 9 En INTRODUCTION English 1 VCR A U DIO INPUT jacks Connect your VCR via an analog connection (see page 19). 2 TV/STB A UDIO INPUT jacks Connect your TV , digital sa tellite tuner , or cable TV tuner via an analog connecti on (see pages 18 and 20). 3 SUBWOOFER OUT jack Connect your subwoofer (see page 24). 4 VIDEO OUT jack Co[...]

Controls and functions 10 En This section describes the func tions of the remote co ntrol used to control t his unit. Some b uttons m arked with a n asterisk ( * ) share the common functions between the YSP and TV/A V operation modes ( N ). y Y ou can also control other components using the remote control once you set the appropriate remote control[...]

Controls and functions 11 En INTRODUCTION English H MA CR O Use to set the TV macro (see page 83). I SLEEP Sets the slee p ti mer (see page 54). J INPUTMODE T oggles between input modes (A UT O, DTS, and AN ALOG) (see page 70). K Beam mode butt ons Change the beam mode setti ngs (see pages 44, 50, and 51). L SUR. DECODE Selects the surround mode fo[...]

Controls and functions 12 En This section describes the func tions of the remote co ntrol used to control other co m ponents when the TV/A V mode is selected with the opera tion mode selector ( 4 ). 1 Numeric buttons Enter numbers. 2 Cursor b uttons / / / , ENTER Use to select D VD menu items. 3 MENU Displays the D VD menu. 4 Operation mode selecto[...]

Installatio n 13 En PREP ARA TION English This section describe s a suitable installation loca tion to install this unit using a rac k. Depending on your installa tion en vironment, connections with external components can be done before installing this unit. W e recommend that you temporarily pl ace and arrange all component s, including this unit[...]

14 En Installatio n ■ Installat ion exampl es Example 1 Install this unit as close to the ex act center of the wall as possible. Example 2 Install this unit so th at the sound beams can be reflec ted of f the w alls. Example 3 Install this unit as close to the e xact front of your normal listening position as possible.[...]

15 En Installatio n PREP ARA TION English ■ Using a rack Install this unit under your TV in a commercially av ailable rack. Make sure that the rack is lar ge enough to allow adequate ventilation space around this unit (see page 13) and that it is strong enough to support the weight of both this unit and your TV . Note This unit[...]

Connec tions 16 En This unit is equipped with the follo wing type s of audio/video input/ output jacks/terminal: For audio inp ut • 2 optical digi tal input jacks • 1 coaxial digital input jacks • 2 sets of analog input jacks For audio out put • 1 subwoofer output jack For video outpu t • 1 analog output jack Use these jacks/terminal to c[...]

17 En Connections PREP ARA TION English ■ Cables used f or connec tions A udio pin cab le (supplied) Optical cable (supplied ) Digital audio pin cable (supplied) Subwoof er pin cab le System connec tor cab le OSD video pin cable (supp lied) ■ Notes on connect ing the optica l cable • Pull out the cap before c onnecting the optical cable. When[...]

18 En Connec tions For audio connection, connect the anal og audio output jacks on your TV to th e TV/STB A UDIO INPUT jacks on this unit. If your TV has an optical digital output jack, connect the optical digi tal output jack on y our TV to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit. For video connection, c onnect the video input jack on [...]

19 En Connections PREP ARA TION English Connect the coaxial dig ital output jack on your D VD play er/recorder to the D VD CO AXIAL DIGIT AL INPUT jack on this unit. When you connect this unit to your D VD/VCR com bo player/recorder , connect th e analog audio output jacks on your D VD/VCR combo player/recorder to th e VCR A UDIO INPU T jacks on th[...]

20 En Connec tions Connect the optical digital output jack on your digital satellite tuner or ca ble TV tuner to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit. Connect the analog audio output jacks on your digital satellite tuner or cable TV tuner to the T V/STB A UDIO INPUT jacks on this unit. y T o prev ent the optical cable from being unpl[...]

21 En Connections PREP ARA TION English Connect the TV/STB A UDIO INPUT jacks on this unit to the analog audio output jacks on y our TV . Connect the optical digital output jack on your digital airwav e tuner to the TV/STB OPTICAL DIGIT A L INPUT jack on this unit in addition to the analog audio connection. By doing so, y ou can enjo y both analog [...]

22 En Connec tions T o connect a VCR, connect the analog audio output jacks on your VCR to the analog audio input jacks (VC R L/R) on this unit. Connect red plugs to the right jacks and white plugs to the left jacks. A udio pin c able Connecting a VCR R L VCR TV/STB VIDEO TV/STB AUX OPTICAL COAXIAL DIGIT AL INPUT OUT AUDIO INPUT DVD SYSTEM CONNECTO[...]

23 En Connections PREP ARA TION English If your component supports optical digi tal connections, connect th e optical digital output jack on your component (e.g., D VD player/recorder) to the A UX OPTICAL DIGIT AL INPUT jack on this unit. y T o prevent the optical cable from being unplug ged, affix th e optical cable in the suppli ed cable clamp (s[...]

24 En Connec tions Connect the monaural input jack on your subw oofer to the SUBW OOFER jack on this unit. This connection alone does not output sound from the connected subwoofer . T o output sound from the connected subwoofer , turn on the power of your subw oofer and then run A UTO SETUP (see page 31) or select SWFR for B ASS OUT in SUBWOOFER SE[...]

25 En Connections PREP ARA TION English Once all other connecti ons are complete, plug the AC po wer supply cable into the A C wall outlet. Connecting the AC po wer supply cable T o the A C wall outlet[...]

GETTING STARTE D 26 En 1 Press and hold the mark on the battery cove r and th en open th e co ver . 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/–). 3 Close the battery cover . • Change all of the batteries if you notice the following co[...]

Getting started 27 En SETUP English 1 Press ST ANDBY/ON to turn on the power of this unit. The volum e lev el appea rs in the front panel display , and the current input s ource and beam mode are displayed. 2 Press ST AN DBY/ON again to set this unit to the standby mode. When this unit is in the st andby mode, only ST ANDBY/ON on the front panel or[...]

USING SET MENU 28 En This section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is comple te, you can enjoy real surround sound while watching TV in the comfort of your o wn home. 1 Check that the video inpu t jack on y our TV is connected to the VIDE[...]

Using SET MENU 29 En SETUP English The follow ing diagram illustrates the overall flo w of the setup procedure. The flow chart of SET MENU Run A UTO SETUP (IntelliBeam). See “ A UTO SETUP (IntelliBeam)” on page 31. Look for a remedy . See “Error messages for A UT O SETUP” on page 37 for a complete list of error messages and possible remedie[...]

CHANGING OSD LANGUAGE 30 En This feature allows you to select the language of your choice that ap pears in SET MENU of this unit. 1 Set the operation mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SET MENU are displayed at the bottom of the screen. • T o return to the previous scree[...]

AUTO SETUP (INTELLIBEAM) 31 En SETUP English This unit creates a sound f ield by reflecting sound beams on the wa lls of your listening room and b y broadening the cohesion of all the channels. Just as you would ar range the speaker positio n of ot her audio systems, you need to set the beam angle to enjoy the best possib le sound from this unit. T[...]

AUTO SETUP (IntelliBe am) 32 En The supplied IntelliBeam microphone collec ts and analyzes the sound that this unit produces in your actual listening en vironment. Follo w the procedure belo w to connect the IntelliBeam microphone to this unit and make sure that the IntelliBeam microphone is placed in a proper location and that there ar e no lar ge[...]

AUTO SETUP (I ntelliBeam) 33 En SETUP English ■ Assembling the supplied car dboard micro phone stand Y ou will f ind three separate pa rts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together . 1 Disassemble the three pa r ts of the cardboard microphone stand originally put together . 2 Insert o[...]

AUTO SETUP (IntelliBe am) 34 En • Make sure that your listening room is as quiet as possible while this unit is performing the A UTO SETUP procedure. • T o achieve the best results possible, ev acuate yourself from your listening room until the A UTO SETUP procedure is completed so that you may not obstruct the path of soun d beams. • Be advi[...]

AUTO SETUP (I ntelliBeam) 35 En SETUP English 5 Press / to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ onl y, or SOUND OPTIMZ only and then press ENTER. The follo wing screen appears on your TV . BEAM+SOUND OPTIMZ (Beam optimization an d sound optimizati on) Use to optimiz e the beam a ngle, delay , volume, and quality so that the paramete rs best match [...]

AUTO SETUP (IntelliBe am) 36 En 8 Check that the f ollowing screen is display ed on y our TV . The results of the A UTO SETUP proced ure are displayed on your TV . y • If “ENVIRONMENT CHECK [F AILED]” is displayed, we recommend runnin g the A UTO SETUP procedure again. For details, see step 9. • If “SUBWOOFER : NOT APPLICABLE” is displa[...]

AUTO SETUP (I ntelliBeam) 37 En SETUP English ■ Error messa ges for A UTO SETUP Before the A UTO SETUP pr ocedure starts While the A UT O SETUP pr ocedure is in pr ogress If one of the errors listed belo w exce pt E-1 is displayed, press RETURN. In case you hav e started the A UTO SETUP procedure by pressing A UTO SETUP in step 3, run the proce d[...]

USING THE SYSTEM MEMORY 38 En Y ou can save the current settings adjusted in SE T MENU in the syste m memory of th is unit. It is han dy to sa ve certain settings accord ing to the varying con ditions of your listening en vir onment. For example, if there are curtains in the path of sound beams, the effecti v eness of the sound beams will vary depe[...]

Using the system memory 39 En SETUP English 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The follo wing screen appears on your TV . 6 Press ENTER again. The ne w parameters are sav ed as MEMOR Y 1, MEMOR Y2, or MEMOR Y3. Once the para meters are sav ed, the display returns to the SET MENU screen. 7 Press MENU to exit. The SE[...]

Using the system memory 40 En 4 Press / to select LO AD and press ENTER. The following screen ap pears on your TV . 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The following screen ap pears on your TV . 6 Press ENTER again. The new parameters sa ved as MEMOR Y1, MEMOR Y2, or MEMOR Y 3 are loaded. Once the parameters are loa[...]

PLAYBACK 41 En BA S I C OPERA TION English Y ou can play back sound fro m the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (STB, VCR, D VD, A UX, or TV) on the remote control. The name of the selected i nput source and the type of corresponding input mode a pp[...]

42 En Playback Press VCR to play bac k a component connected to the VCR in put jack on the rear panel of th is unit. Press A UX to play bac k a component connected to the A UX jack on t he rear panel of this unit. Once an input source is selected (see page 41), you can play back the selected inp ut source. This section uses a D VD player as an exam[...]

43 En Playback BA S I C OPERA TION English Press V OLUME +/– to increase or decrease the v olume le vel. The numeric v alue of the volume le vel appears in the front panel display . Control range: MIN (minimum), 01 to 99, MAX (maximum) • The volume le vel of all input sources (including multi-channel as well as stereo sources) cha nges at the s[...]

ENJOYING SURROUND SOUND 44 En Y ou can enjoy mu lti-channel surround sound b y changing the be am mode using the beam m ode b uttons on the remote control. Select 5 Beam, Stereo plus 3 Beam, 3 Beam, or My Su rround for multi-channel playback. • When ANGLE TO W ALL OR CORNER is set in M ANU AL SETU P (see page 58), 5 Beam and 3 Beam cannot be sele[...]

45 En Enjoying surround so und BA S I C OPERA TION English Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels. Th is mode is ideal for wa tching liv e recordings on a D VD. V o cals and instrumental sounds can be heard close to the cent er of the listening position while [...]

46 En Enjoying surround sound ■ Decoder indicat ors Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follows: y • Y ou can select an input mode (A UTO, DTS, or AN ALOG) by pressing INPUTMODE repeated ly (see page 70). • Discs encoded in DTS-ES, Dolb y Digital 5.1 EX, D[...]

47 En Enjoying surround so und BA S I C OPERA TION English This unit can decode 2-cha nnel sources for 5.1-channel playback so that you can enjoy a v a riety of surround sound effects b y switching the surround mode. y The beam mode must be set to 5 Beam, Stereo plus 3 Beam, or 3 Beam (see page 44). 1 Set the operat ion mode selector to YSP. 2 Pres[...]

48 En Enjoying surround sound Y ou can enjoy an alog audio signals output from your TV in real surround sound. y Before perform ing the steps below , set the volume of this unit to 30. If necessary , adjust the volume le vel in step 4 belo w . 1 Select the TV channel you want to watch. T o select a TV channel, use the remote control supplied with y[...]

49 En Enjoying surround so und BA S I C OPERA TION English Y ou can configure the parame ters for Dolb y Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 1 Repeat st eps 1 and 2 in “Enjo ying 2-chan nel sources in surr ound sound” on page 47 an d select PL II Musi c or Neo:6 Music. 2 Press / to select the parameter[...]

ENJOYING STEREO SO UND 50 En Y ou can enjoy 2-channel stereo playback as the beam mo des by pr essing STEREO on the remote control. Sounds are output from the front right and left channels. This is ideal for playing ba ck hi-f i sources, such as C Ds, and can be used to replace your TV speakers. • When you play back Dolby Dig ital audio signals i[...]

PLAYING BACK SOUND CLEARLY (MY BEAM) 51 En BA S I C OPERA TION English Y ou can improv e listenability in a noisy en vironment by changing the beam mode to My Beam, which outputs sound beams directly tow ard the liste ning position in a single channel. In addition, My Beam is al so ideal when you do not want the sound beams to be reflected on the w[...]

52 En Playing back sound clearly (My Beam) Y ou can adjust t he beam a ngle manually while playing back an input source. Thi s function is also ideal if the listening position is out of th e operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP. 2 Press MY BEAM. “MY BEAM” is displaye d in the front p an[...]

USING THE VOLUME MODE (NIGHT LISTEN ING ENHANCER/TV VOLUME EQUAL MODE) 53 En BA S I C OPERA TION English The night listening enhancers are designed to impro ve listenabi lity at lo wer v olumes or at ni ght. In addition, you can limit the v olume le vel of the TV so that it will not v ary sudden ly to a great e xtent whene ver the con tents being b[...]

USING TH E SLEEP TI MER 54 En Use this feature to automatic ally set this unit to the stand by mode after a specif ied period of time. The sleep timer is useful if you are going to sleep after a certain amount of time while this unit is still playing back a source. 1 Set the operation mode selector to YSP. 2 Press SLEEP repeatedly to set the interv[...]

55 En Using the sleep timer BA S I C OPERA TION English ■ Canceling the sl eep timer 1 Set the operat ion mode selector to YSP. 2 Press SLEEP repeatedly until “SLEEP OFF” appears in the fr ont panel display . 3 W ait f or a few seconds without operatin g this unit to confirm the setti ng for the sleep timer . The SLEEP indicator disapp ears f[...]

MANUAL SETUP 56 En T o achieve the best quality surro und sound, you can use M ANU AL SETUP to f ine-tune the listening en vironment parameters, as well as to ma k e advanced settings for sound signals, sound be ams, digital i nput, and the OSD. Change the initial settings (indica ted in bold under each paramete r) to reflect the needs of your own [...]

57 En MANUAL SETUP AD V ANC ED OPERA TION English Use the remote control to acce ss and adjust each parameter . y Y ou can adjust the SET MENU parameters while the unit is reproducing sound . 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SE T MENU are displayed a[...]

58 En MANUAL SETUP Use to manually ad just the va rious parameters related to the sound beam ou tput. SET MENU → MANU AL SETUP → BEAM MENU y Y ou can adjust the sound beam ou tput le vel of each channel in “ Adjusting the audio balance” (see page 67). ■ SETTING P ARAMETERS (Setting parame ters) Use to set the position of this unit in your[...]

59 En MANUAL SETUP AD V ANC ED OPERA TION English • Select ANGL E TO W ALL OR CORNE R if this unit is installed in the corner of y our listening room. Adjust the width and length of you r listening room as well as the distance of the listening posit ion from this unit. Choices for the room width and length: 2.0 m to 12.0 m (6.5 ft to 40.0 ft) Cho[...]

60 En MANUAL SETUP BEAM TRA VEL LENGTH (Beam travel length) A certain amount of delay mu st be applied to the sound from each channel so that al l sounds can arri ve at the listening position at the same time . This menu sets the distance that sound beams tr avel after being output and reflected of f the wall unti l they arri v e at the listening p[...]

61 En MANUAL SETUP AD V ANC ED OPERA TION English TREBLE GAIN (T reble gain) Use to adjust the high-frequency output le vel of each channel. y If the reflection points of the front left and right or surround left and right sound beams are on curtain or other acoustically absorbent surfaces, you can achie ve more ef fective surround sound by increas[...]

62 En MANUAL SETUP Use to manually ad just the va rious parameters related to the sound output. SET MENU → MANU AL SETUP → SOUND MENU ■ T ONE CONTR OL (T one control) Y ou can adjust the tonal quality of sound beams. TREBLE (T reble) Use to adjust the high-frequency response. Choices: –12 dB to +1 2 dB Initial setting: 0 dB B ASS (Bass) Use[...]

63 En MANUAL SETUP AD V ANC ED OPERA TION English ■ A UDIO DELA Y (Audio dela y) Use to delay the sound output and synchronize it with the video image. This may be ne cessary when using certain LCD monitors or projectors. Choices: 0 to 160 msec ■ DD/DTS Dynamic Range (Dynamic range of Dolb y Digit al and DTS signals) Use to select the amount of[...]

64 En MANUAL SETUP Use to manually ad just the va rious parameters related to the audio and video input. SET MENU → MANU AL SETUP → INPUT MENU ■ INPUT MODE (Input mode) Use to designate the input mode for the input sources connected to the DIGIT AL INPUT jacks when you turn on the po wer of t his unit. F or information on the types of audio s[...]

65 En MANUAL SETUP AD V ANC ED OPERA TION English ■ INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel di splay . Press an input select or button (e.g., D VD) to select the comp onent you want to change the name for and perform the following procedure. 1 Press / to place the _ (underscore) under [...]

66 En MANUAL SETUP Use to manually ad just the va rious parameters related to the display . SET MENU → MANU AL SETUP → DISPLA Y MENU ■ F .DISPLA Y SET (Front panel displa y settings) Use to adjust the brightness and display settings of the front pa nel displ ay . ST ANDARD DIMMER (Standard dimmer) Use to adjust the brightne ss of the front pa[...]

Adjusting the audio balance 67 En AD V ANC ED OPERA TION English Y ou can adjust the sound beam output lev el of each channel by using the test tone or the a udio output being played back in each beam mode to achie ve a more true-to-life su rround sound experience. Y ou can use the test tone feat ure to output a test tone from each channel to manua[...]

68 En Adjusting the audio balance 5 Press TEST when you ha ve completed all your adjustments. • All channel levels cannot be adju sted when the stereo playback (see page 50), My Beam (see page 51 ), or My Surround (see page 45) is selected as the beam mode. • “FR ONT L/R” cannot be adjusted whe n Stereo plus 3 Beam is selected as the beam m[...]

69 En Adjusting the audio balance AD V ANC ED OPERA TION English 3 Press / to adjust the channel v olume. Control range: –10.0 dB to +10.0 dB 4 W ait f or a few seconds without operatin g this unit when y ou have completed y our adjustment. • All channel levels cannot be ad justed when the stereo playback (see page 50), or My Surr ound (see pag[...]

Selecting the input mode 70 En Y ou can select the type of audio input si gnals o f the selected input source accord ing to your preference or the conditions of the input source. This function is av ailable for TV/STB, D VD, and A UX. y W e recommend setting the input mo de to A UTO in mos t cases. 1 Set the operation mode selector to YSP. 2 Press [...]

Adjusting the system parameter s 71 En AD V ANC ED OPERA TION English This unit has additional menus that are displayed in the front panel display . Thes e menus of fer additional o perations to adjust and customize the w ay this unit operates. When “F .P ANEL KEY” is set to “F .P ANEL: O FF” (see page 76) , ST ANDBY/ON on the front panel i[...]

72 En Adjusting the system pa rameters Y ou can protect the settings you sa v ed in the system memory of this uni t from bei ng accidentally erased or unwantedly changed. 1 Repeat steps 1 to 3 in “Using the system parameters” on page 71. 2 Set the operation mode selector to YSP. 3 Confirm that “MEMOR Y PRO TECT” is displa yed in the front p[...]

73 En Adjusting the system parameter s AD V ANC ED OPERA TION English Y ou can set th e maximum v olume lev el so that this unit will not output sound beyond the limited v olume le vel. 1 Repeat steps 1 to 3 in “Using the system parameters” on page 71. 2 Set the operat ion mode selector to YSP. “ 3 Press / so that “MAX V OLUME SET” is dis[...]

74 En Adjusting the system pa rameters 3 Press / so that “TURN ON V OLUME” is displa yed in the front panel disp lay . 4 Press ENTER. 5 Press / to adjust the initial volume le vel. Control range: MAX, 99 to 01, OFF Control step: 1 6 Press ST ANDBY/ON on the remote control to set this unit to the standb y mode. The ne w setting for the maximum v[...]

75 En Adjusting the system parameter s AD V ANC ED OPERA TION English 5 Press / to switc h between “DEMO: ON ” and “DEMO: OFF”. • Select DEMO: ON to acti v ate the demo mode. • Select DEMO: OFF t o deacti v ate the demo mode. 6 Press ST A NDBY/ON on the remote control to set this unit to the standby mode. The ne w setting will be acti v[...]

76 En Adjusting the system pa rameters 5 Press / to switch between “P .INPUT : ON” and “P .INPUT: OFF”. • Select P .INPUT : ON to enable the INPUT ke y on the front panel. • Select P .INPUT : OFF to disable the INP UT key on the front panel. “F .P ANEL KEY” is automatically set to “ON”. 6 Press ST ANDBY/ON on the remote control [...]

77 En Adjusting the system parameter s AD V ANC ED OPERA TION English 5 Press / to switc h between “F .P ANEL: ON” and “F .P ANEL: OFF”. • Select F .P ANEL: ON to enable the front panel keys. • Select F .P ANEL: OF F to disable the front panel key s. “P .INPUT” is autom atically set to “ON”. 6 Press ST A NDBY/ON on the remote co[...]

78 En Adjusting the system pa rameters 5 Press / to switch between “PRESET : RESET” and “PRESET : CANCEL”. • Select PRESET : RESET to reset a ll of the curren t settings. • Select PRESET : CANCEL to cancel the resetting procedure. 6 Press ST ANDBY/ON on the remote control to set this unit to the standb y mode. The new setting will be ac[...]

Remote control features 79 En AD V ANC ED OPERA TION English In addition to controlling this unit, the remote control can also ope rate other A V components made by Y amaha and other manufacturers. T o control other component s, you must set up the remote contro l with the appropriate remote control codes and set the operation m ode selector to TV/[...]

80 En Remote control features ■ Operating y our T V Set the operation mode se lector to TV/A V, an d press TV to select TV as the input source. The control area of the remote con trol changes to the TV operation mode. 1 Numeric buttons Selects a TV channe l for playback. 2 CH +/– Switches between the a v ailable TV channels. 3 TV INPUT Switches[...]

81 En Remote control features AD V ANC ED OPERA TION English ■ Operating y our D VD pla yer/recor der Set the operation mode selector to TV/A V and press D VD to select D VD as t he input sour ce. The control area of the remote control changes to the D VD operation mode. 1 Numeric buttons Enter numeric digits. 2 Cursor buttons / / / , ENTER Use t[...]

82 En Remote control features ■ Operating y our VCR Set the operation mode selector to TV/A V and press VCR to sele ct VCR as the input source. The control area of the remote control changes to the VCR operation mode. 1 Numeric buttons Enter numeric digits. 2 CH +/– Switches between the a v ailable VCR channels. 3 Operation b uttons for VCR Ope[...]

83 En Remote control features AD V ANC ED OPERA TION English The TV macro feature ma kes it possible to perform a series of operations with the press of a single b utton. For example, when you w ant to play a D VD, you wo uld normally turn on the component , select D VD as the input source, and press the play bu tton to start playback. The TV macro[...]

84 En Remote control features ■ Setting macr os f or the TV without the tuning capability 1 Press and hold CODE SET and press one of the input selector b utton s to select the input sour ce you want to set macr os fo r . Proceed to step 2 while holding down CODE SET. 2 Press MA CRO while holding down CODE SET. 3 Press INPUT1. Check that the TV sc[...]

Troubleshooting 85 En ADDITIONAL INFORMA TION English Refer to the chart belo w when this unit does not function prope rly . If the problem you are experiencing is not listed belo w or if the instruction below does not help , set this unit to the standby mode, di sconnect the A C power supply cable, and contact the nearest authoriz ed Y amaha deale[...]

86 En Troubleshooting Problem Cause Remed y See page No sound from the subwoofer . BASS OUT in SUBWOOFER SET is set to FR ONT. Select SWFR. 62 The source does not co ntain lo w bass signals. Distorted o r too little bass sound. CR OSS O VER in SUBWOOFER SET is set incorrec tly . Set CROSS O VER corr ectly . 62 One of the ni ght listening enhancers [...]

87 En Troubleshooting ADDITIONAL INFORMA TION English ■ Remote contr ol Prob lem Cause Remedy See page The remote c ontrol does not work and/or function properly . Wrong dist ance or ang le. The remote c ontrol fun ctions withi n a maximum range o f 6 m (20 ft) and no more than 30 de grees of f-axis from the fron t panel. 26 Direct sun light or l[...]

Glossary 88 En ■ Dolb y Digital Dolby Digital is a d igital surround sound system that gi ves you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right) and 2 surround stereo channels, Dolby Digita l pro vides 5 full- range audio channels. W ith an additional channel especially for bass effects, called LFE [...]

89 En Glossary ADDITIONAL INFORMA TION English ■ LFE 0.1-chan nel This channel is for the reproduction of lo w bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This channel is counted as 0.1 because it only enforces a low-f requency range compared to the full-range reproduction by the other 5/6 ch annels in Dolby Digital or [...]

90 En ■ Numerics 3 Beam ............ ........... ........... ........... ............ ........... ........ 45 5 Beam ............ ........... ........... ........... ............ ........... ........ 44 ■ A A C po wer supply cable ... ........... ........... ........... ........... .... 25 Audio pin cable ...... ........... ........... ........[...]

Specifications 91 En ADDITIONAL INFORMA TION English AMP SECTION • Ma ximum Output Power (JEIT A) .................... ................... .......... 2 W (1 kHz, 10% THD, 4 Ω ) × 16 15 W (100 Hz, 10% THD, 4 Ω ) × 2 SPEAKER SECTION •D r i v e r Small dia. sp eakers ................... 2.8 c m (1-3/32 in) cone magnetic shielding type × 16 [...]

92 En Limited Guarantee f or Eur opean Economic Area (EEA) and Switzerland Thank you for having chosen a Y amaha prod uc t. In the unlikely event that your Y a maha product needs guarantee service, please co ntact the dealer from whom it was purchased. If you experience any diff iculty , please co ntact Y amaha representative off ice in your countr[...]

i List of remote control codes TV ADMIRAL 292, 293, 216 AIW A 294, 276, 283, 284 AKAI 295, 296 ALB A 296 A OC 297 BELL & HOWELL 292 BEST AR 298 BLA UPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BR OC SONIC 297 BUSH 296 BYD:SIGN 201, 202 CLA TRONIC 298 CRAIG 224 CR OSLEX 225, 298 CUR TIS MA THIS 297, 226 D AEWOO 297, 298, 224, 227, 228 D A YTR ON 239 [...]

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHO RPE AVE., BUEN A PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCAR BOROUGH, ONTARIO M1S 3R1, CAN ADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RE LLINGEN BEI HAMBURG , GERMANY YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZA T BP70 CROISSY-BEAUB OURG 7731[...]

Connecting external components such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below . After all connections are complete, plug the power supply cable into the AC wall outlet. For further information on connecting other components, see pages 16 to 24 in the Owner ’s Manual. HTY[...]

Press ENTER to start the AUT O SETUP procedure, and then leave the room within 10 seconds. The following screen appears on the TV . Leave the room within 10 seconds before the AUTO SETUP procedure starts. The setup screen automatically changes during the AUTO SETUP procedure. When the AUTO SETUP procedure is completed, the following screen appears [...]