Yamaha RX-V767 manual

Owner’ s Man ual A V Receiver English f or Eur ope[...]

En 2 CONTENTS INTRODUCTION Featur es and capabilities ............... ...................... .............. 4 Using the TV OSD to operate th e unit ............ ................. 5 V ie w or modify content fo r the current input source <Content windo w> .................... ................... .................... 5 Configuring settings for t[...]

En 3 SETUP Conf iguring input sources (Input menu) ..... .................. 68 Configuring input sources .............. ....................... ......... 68 Input menu ............. .................... ...................... ............... 69 Editing the SCENE function (SCENE menu) ............... 72 Editing a scene .................. ...........[...]

En 4 INTRODUCTION ■ Built-in high-quality , high-p ower 7-c hannel amplifier ■ 6 HDMI input jacks ( 5 + 1 VIDEO A UX) supporting A udio Return Channel and 3D video signal ■ 2 HDMI output jacks – Selecting th e HDMI OUT jack .. ......... ............ ............ ............ .......... ............ ............ ............ ....... ........[...]

INTRODUCTION En 5 This unit features a sophisticated on-scree n display (OSD) for the TV screen. The O SD is designed to enable visual g uidance tha t simplifies operations. The OSD mainly displays the ON SCREEN and OPTION menus, as well as the Content window that displays the content of current input so urces. ■ Select an input source, SCENE and[...]

INTRODUCTION Using the TV OSD to operate the unit En 6 ■ Adjust video signals output from this unit – Con vert analog video signal to anot her type of signal <Anal og to Analog Conversion> ................ ....... 86 – Specify the resolution and asp ect ratio of analog video signal con verted to HDMI or specify upscaling resolution for [...]

En 7 INTRODUCTION Using the TV OSD to operate the unit About this manual Supplied accessories Check that you re ceiv ed all of the follo wing parts. • Remote control • Batteries (AAA, R03, UM-4) x 2 • YP A O microphone • AM loop antenna • Indoor FM antenna • VIDEO A UX input cover • Some features are not av ailable in certain regions.[...]

INTRODUCTION En 8 Front panel a MAIN ZONE A (Po wer) Switches this unit between on and standb y mode. b HDMI Through/iP od Charge indicator Lights up in any of the following cas es while the unit is in standby mode. • When the Standb y Through funct ion is enabled and au dio/video fro m an external component connected with HDMI is output to a TV [...]

En 9 INTRODUCTION Part names and functions Rear panel a DOCK jack For connecting an optional Universa l Dock fo r iPod/iPhone (su ch as YDS-12), iPod wireless receiver (YID-W10), or Bluetooth wireless audio receiver (YB A-10) ( ☞ p. 61 , p. 64 , p. 66 ). b PHONO jacks For co nnecting a tu rntable ( ☞ p. 27 ). c HDMI OUT 1-2 jacks For co nnectin[...]

En 10 INTRODUCTION Part names and functions Front panel display a HDMI indicator Lights up during normal HDMI communication when an y of the HDMI1-5 inputs are selected. OUT 1/OUT 2 indicators Lights up which outp uts audio/vi deo signals from the HDMI OUT jack ( ☞ p. 22 ). b CINEMA DSP indicator Lights up when a sound field eff ect that uses CIN[...]

En 11 INTRODUCTION Part names and functions Remote control a Remote control signal transmitter T ransmits infrared signals. b MAIN/ZONE2 Switches the zone to be operated by the remote c ontrol between the Main zone an d Zone2 ( ☞ p. 109 ). c SOURCE A (SOURCE P ower) Switches an external component on and off. d Input selector Select an input sourc[...]

INTRODUCTION Part names and functions En 12 On-screen display When a TV is connected to this unit, the supplied remo te control can be used to specify and v erify this unit’ s settings via menus and opti ons displayed on the TV screen. The following displays are a vai lable in the on-screen display . ■ Displaying the f ollowing men us or viewin[...]

En 13 CONNECTIONS This unit uses acoustic f ield effects and sound decoders to bri ng you the impact of a real movie theater or con cert hall. These effects will be brought to you with ideal speak er positioning and connections in your listening en vironment. Speaker channels and functions ■ Front left and right speaker s The front speaker s are [...]

CONNECTIONS Connecting speakers En 14 Speaker layout ■ Enjoying the 7.1 channel audio sour ce ■ 7.1-channel speaker la yout (7 speakers + subw oofer) ■ Connections of speakers Connect the speakers to the following jacks according to the speaker layout. Refer to “Fr ont/Center/Surround/Surround back speaker and Subw oofer connect ion” and [...]

CONNECTIONS Connecting speakers En 15 ■ Enjoying the 7.1 channel audio sour ce without surround bac k speakers ■ 5.1-channel speaker la yout (5 speakers + subw oofer) ■ Connections of speakers Connect the speakers to the following jacks according to the speaker layout. Refer to “Fr ont/Center/Surround/Surround back speaker and Subw oofer co[...]

CONNECTIONS Connecting speakers En 16 ■ Using speakers in tw o rooms (Zone2 function) ■ 7.1-channel speaker la yout + Zone 2 (7 speakers (in main zone) + subw oofer (in main zone) + front speaker s (in secondary zone)) Main zone Zone2 ■ Connections of speakers Connect the spea kers to the follo wing jacks acc ording to the speaker layout. Ref[...]

CONNECTIONS Connecting speakers En 17 Connecting speaker s and subwoofer Connect your speakers to their respective terminals on the rear panel. ■ Front/Center/Surr ound/Sur round bac k speaker and Subwo ofer connection ■ Presence speaker connection When using the presence speake rs , connect the spea kers to the EXTRA SP jacks as shown in the d[...]

CONNECTIONS Connecting speakers En 18 ■ Bi-amp connection This unit can be connected to speakers that support bi-amp connections. When conne cting speakers, connect the FR ONT jacks and the SURR OUND BA CK /BI-AMP jacks as in the diagram below . Configure the bi-amp sett ings to acti vate connections. ■ Multi-zone audio system using the interna[...]

CONNECTIONS Connecting speakers En 19 3 Check that “SP IMP .” is displayed on the fr ont panel. 4 Press STRAIGHT repeatedly to select a “6 Ω MIN. ” 5 Switch this u nit to the standb y mode, and then switc h it on again. The power turns on, when the settin gs you made has been configured. ■ Connecting speakers This type of jack can connec[...]

CONNECTIONS En 20 Cable plugs and jacks This unit is equipped with the following input/out put jacks. Use jacks and cables appropriate for components that you are going to connect. ■ A udio/Video jacks HDMI jac ks Digital video and digital sound ar e transmitted through a single jack. Only use an H DMI cable. ■ Analog video jac ks ■ A udio ja[...]

CONNECTIONS Connecting external components En 21 Connecting a TV monitor This unit is equipped with the following three types of output jack for connection to a TV . HDMI OUT 1-2, COMPONENT VIDE O or VIDEO. Select the prope r connection according to the input signal format supported by your TV . When connecting to an HDMI compatible TV V ideo signa[...]

CONNECTIONS Connecting external components En 22 ■ Connecting an HDMI video monitor Connect the HDMI cable to one of the HDMI OUT 1-2 jacks. ■ Connecting a component video monitor Connect the component video cable to the COMPONENT VIDEO (MONIT OR OUT) jacks. ■ Connecting a video monitor Connect the video pin cable to the VIDEO (MONITOR OUT) j[...]

En 23 CONNECTIONS Connecting external components ■ Listening to TV audio T o transmit sound from the TV to this unit, c onnect as follo wings according to the TV : When using a TV that supports the A udio Return Channe l function and HDMI Contr ol function When your TV supports both HDMI Control (e.g., Panasonic VIERA Link) and Audio Return Chann[...]

CONNECTIONS Connecting external components En 24 Connecting BD/DVD play ers and other devices This unit has the follo wing input jacks. Conn ect them to the appropr iate output jack s on the playback devices such as BD/D VD players. ■ Connecting BD/D VD player s and other devices with HDMI Connect the de vice with an HDMI cable to one of the HDMI[...]

En 25 CONNECTIONS Connecting external components ■ Connecting BD/D VD pla yers and ot her de vices with component video cables Connect the device with a co mponent vide o cable to one of the A V1-2 input jacks. Using optical digital audio output sources Select the A V1 input to which the playba ck device is connected for playback. Using coaxial d[...]

En 26 CONNECTIONS Connecting external components ■ Connecting BD/D VD player s and ot her devices with S-video cables Connect the S-video cable to the A V5 input jack. Conn ect the output audio to the A V5 analog audio jack. Select the A V5 input that the pla yback device is connected to fo r playback. V i deo from the S VIDEO jack is output thro[...]

En 27 CONNECTIONS Connecting external components ■ Connecting CD play ers a nd other audio de vices Using analog stereo out put sources Select the audio input (A UDIO1-2) to which the playback de vice is connected for playback. Using optical digital output sources Select the A V input (A V1 or A V4) to which th e playback device is connected for [...]

En 28 CONNECTIONS Connecting external components Connecting game consoles Use the VIDEO A UX jacks on the front panel to tempor arily connect devices such as a game console to the receiver . Select the V -A UX input to use these connected devices. ■ When connecting an HDMI compatible device Connect the HDMI output of the device to the HDMI IN jac[...]

En 29 CONNECTIONS Connecting external components Connecting an ex ternal amplifier The same channel signals are output from the ja cks of the PRE OUT terminals as from their corresponding SPEAKERS terminals. When co nnec ting an external power amplif ier (pre-main amplifier) to enhance speaker out put, connect the input terminals of the po wer ampl[...]

En 30 CONNECTIONS Connecting external components Using the T rigger function to link external component power When this unit is connected to a Y amaha subwoof er that supports the system connection or the component with TRIGGER IN jack, you can turn on and off the component by using this unit. ■ When connecting a Y amaha subwoof er ■ When conne[...]

CONNECTIONS En 31 An indoor FM antenna and an AM loop antenna are supplied with this receiv er . Connect these antennas properly to their respecti ve jacks. Assembling the AM loop antenna Connecting the FM/AM antennas ANTENNA FM GND AM 75 ANTENNA FM GND AM 75 D OC K VIDEO HDMI 1 ( B D / DV D ) HDMI 2 HDMI 3 F R O N T TRI GG ER OUT +12V 0 .1A MAX. I[...]

CONNECTIONS En 32 This unit is equipped with a Y amaha Parametric Room Acoustic Op timizer (YP A O) that adjusts the status, size, and v olume balance of the speakers in order to provide an optimal sound f ield. Using YP A O allows you to automatically conf igure settings, such as adjusting speaker output and acoustic parameters to suit your list e[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 33 4 Connect the YP AO micr ophone to the YP AO MIC jack on the front pan el. “Mic On. V ie w ON SCREEN” appears on the front panel display , and the follo wing display appears on the front panel display or TV screen. 5 Press k Cursor B / C to select the “Multi P osition?[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 34 6 Press k Cursor B / C repeatedly to select the “Measure” and press k ENTER to start measurement. Auto measurement starts in 10 seconds. Display during measurement When “Multi P osition” is set to “No” in step 5 The follo wing display appears when measurement fini[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 35 The following display appears again when measurement f inishes at the last position without an y problem s. 8 Press k Cursor B / C to select “Save/Exit” and press k ENTER . 9 Press k Cursor D / E to select “SA VE” and press k ENTER . 10 Press k ENTER . YP A O is autom[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 36 ■ Revie wing and reloading automatic setup parameters The results of automa tic acoustics measurement can be revi ewed once measureme nt is complete. Automatic setup parameters can also be reloaded if you are not satisfied with manually c onfigured speaker setup and sound a[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 37 ■ When an error message is display ed during measurement See “Error messages” ( ☞ p. 38 ) for instructions on resolving the problem and measure acoustics again. Check the error code displayed and use YP A O to measure acoustics again as described belo w . When “E-1,[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 38 ■ Message list ■ When a warning message is display ed before measurement ■ Erro r messages NO TE If the follo wing messages appear, re solve the problems tha t have occurred and carry out the measurement process again. Connect MIC! The YP AO microphone is not connec ted[...]

CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 39 ■ W arning messages W-1: Out of Phas e The speakers disp layed are conn ected with the opposite p olarity . Depending o n the type of speakers you are using and the en vironmen t in which you h ave them installed, this message may occur even if the speaker s are connected c[...]

En 40 PLA YBACK 1 T urn on external co mponents (TV , DVD play er , etc.) connected to this unit. 2 Use the d Input selector to select the input source. The name of the selected i nput source is displayed for a fe w seconds. J 1 When DOCK or TUNER is selected, the Content window is displayed ( ☞ p. 54 ). 3 Play the e xternal component that you ha[...]

En 41 PLA YBACK Basic playback procedure Adjusting high/low-frequency sound (T one control) Y ou can adjust the balance of the high- frequency range (T reble) and low-frequenc y range (Bass) of sounds output from the front left and right speakers to obtain desired tone. 1 Press T ONE CONTROL on the front panel repeatedly to select “T reble” or [...]

PLA YBACK En 42 This unit has a SCENE function that allo ws you switch this un it on and change input sources, sound programs, and HDMI OUT with one ke y . Four scenes are a vail able for different uses, such as playing movies or music. Th e follo wing input sources, sound programs, and HDMI OUT are pro vided as the initial fact ory settings. Regis[...]

PLA YBACK Enjoying th e desired sound fi eld effect En 43 Selecting sound pr ogram ( ☞ p. 46 ): MO VIE category: Press s MO VIE repeatedly MUSIC categor y: Press s MUSIC repeatedly Selecting stereo reproduction: Press s MUSIC repeated ly Selecting surround decoder: Press s SUR. DECODE repeatedly T urning on Straight decoding m ode: Press s STRAIG[...]

PLA YBACK Enjoying th e desired sound fi eld effect En 44 ■ Enjoying sound pr ograms without surround speaker s This unit allo ws you to use virtual surround speake rs to enjoy sound fi eld surround effects, e v en without any surround speakers (V irtual CINEMA DSP mode). Y ou can ev en enjoy surround sound presence with ju st a minimal conf igur[...]

PLA YBACK Enjoying th e desired sound fi eld effect En 45 ■ Enjoying Hi-Fi Sound Quality (Pure Direct mode) Use Pure Direct mode to enjoy the pure high fidelity sound of the selected source. When Pure Direct mode is enabled, this u nit plays back the se lected source with the least circuitry . J 1 Press s PURE DIRECT to turn Pure Dir ect mode on.[...]

PLA YBACK Enjoying th e desired sound fi eld effect En 46 Sound programs ■ Category: MO VIE Sound programs optimized for vie w ing video sources such as mo v ies, TV programs, and games. in the table indicates the sound program for CINEMA DSP. Standard This progr am creates a sound field emphas izing the surround fe eling witho ut distur bing the[...]

PLA YBACK Enjoying th e desired sound fi eld effect En 47 ■ Category: MUSIC This sound f ield is suitable when liste ning to music sources such as CDs. ■ Category: SUR.DEC (Surround decode mode) Select this program to playback sources with selected decode rs. Y ou can playback 2-channel audio sources in up to 7-channels using a surround decod e[...]

PLA YBACK En 48 This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. W ith the OSD, you can view information of the signals being input and the status of this unit. V isual guidance simplifies operations for menus. Basic operations via the TV screen display This section describes [...]

PLA YBACK Using the TV disp lay to control this unit En 49 ■ Selecting a scene 1 Use k Cursor B / C to select “Scene” and press k ENTER . Scene icons are displayed at the bottom of the TV screen. 2 Use k Cursor D / E to select a scene and press k ENTER . The scene is selected. ■ Selecting a sound program 1 Use k Cursor B / C to select “So[...]

PLA YBACK En 50 This unit has a unique OPTION menu for each input source. OPTION menus can be used to enable features such as volume trim for c ompatible input sources or to display audio/video data. OP TION menu display and setup OPTION menu operations are displayed on the front panel display or TV screen. TV display is used here to explain operat[...]

PLA YBACK Configuring setti ngs specific to an indivi dual input source (O PTION menu) En 51 OP TION menu The following items are pro vided for each input source. J 1 ■ Adjusting high/low-frequenc y sound T one Control Input source: All input sour ces except MUL TI CH Y ou can adjust the balance of the high-frequency range (T reble) and low-frequ[...]

PLA YBACK Configuring setti ngs specific to an indivi dual input source (O PTION menu) En 52 ■ A uto-adjusting the sound level to make even low v olumes more audible Adaptive D RC Input source: All input sources except MUL TI CH Adjusts the dynamic range in conj unction with the volume lev el (from minimum to maximum). When you play audio at nigh[...]

PLA YBACK Configuring setti ngs specific to an indivi dual input source (O PTION menu) En 53 ■ Adjusting v olume between input sour ces Vol ume T ri m Input source: All Reduces any change in v olume when switch ing between input sources b y correcting vol ume difference s in each input source. Y ou can adjust this paramete r for each input source[...]

PLA YBACK En 54 When DOCK or TUNER is selected, the Content window is displayed on the TV screen. Playback style for iPod and functions for FM/ AM tuner can be set in the Co ntent window . Displaying the Content window on the TV screen Press d DOCK or d TUNER to display the Content windo w. The Content windo w consists of two main displays, the Now[...]

PLA YBACK En 55 Selecting a frequency for reception (Normal tuning) 1 Press d TUNER to switch to th e tuner input. 2 Press e FM or e AM to select a band to receive . 3 Use e TUNING H / I to set a frequency to receive . e TUNING H Increases the frequenc y . Press and hold this key for longer than a second to search automatically for a station on a h[...]

PLA YBACK FM/AM tuning En 56 e MEMOR Y e PRESET F / G m Numeric keys MEMORY PRESET 78 56 90 1234 SCENE RETURN VO L U ME ENHANCE R S UR. DE CO DE STRAIGHT SLEEP P URE DIRECT PA R T Y M OVI E M USI C BD DVD TV CD RADI O MU T E ENTER 10 R EC ENT TOP MENU P OP-U P M EN U H DMI AV A UDI O 1 2 3 4 1 2 5 V - AUX DI S PLA Y SO UR C E M AIN Z O NE 2 RE C EI[...]

PLA YBACK FM/AM tuning En 57 Radio Data System tuning Radio Data System is a data transmission system used by FM stations in many coun tries. This unit can recei ve various Radio Data Sy stem data such as “Program Service, ” “Program T ype, ” “Radio T ext, ” “Clock Time” when receiving Radio Da ta System broadcasting stations. ■ D[...]

PLA YBACK FM/AM tuning En 58 ■ A utomatic traffic inf ormation reception When the tuner is acti ve, this unit ca n automatically search for and re ceive transmissions from traf fic information broadcast st ations. T o start this function: Operations relate d to Automatic traf fic information reception can be performed us ing the front panel displ[...]

PLA YBACK FM/AM tuning En 59 Confirming and operating the FM/AM tuner from the Content window The station currently recei ved can be conf irmed from the menu displayed on the TV sc reen. V arious FM/AM tuner operations can be performed from the Content windo w rather than controls on th e front panel display . The Content window is displayed when d[...]

PLA YBACK FM/AM tuning En 60 ■ Operating fr om the Content bro wse view a Preset station list The list of preset stations is displayed. b Screen button area Buttons for av ailable opera tions are displayed. See “Screen buttons on the Content browse vie w” for details. Screen buttons on the Cont ent browse view T o use these buttons, f irst pr[...]

PLA YBACK En 61 Once you have connected a Univ ersal Dock for iPod/iPhone (such as the YDS-1 2, sold separately) to this unit, you can e njoy play back of your iPod/iPhone using the remote control supplied with this unit. When playing back from an iPod/iPhone, you can also use the compressed music enhancer sound programs to giv e compressed audio f[...]

PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 62 Playing iPod/iPhone from the menu screen (Menu browse control) The iPod/iPhone can be o perated from the menu displayed on the TV screen. Y ou can operate the iPod/iPhone from the Now playing vie w or the Content bro wse view . ■ Operating fr om the Content bro wse view a Input name [...]

PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 63 Play Control Operates the basic playback functions of iPod/iPhone. Scroll Switches the scroll tar get (artist name, alb um name, or song name). Browse Switches the display to the Content browse vie w . Close Returns to the video playback, turning of f the menu display . k ENTER ENTER S[...]

PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 64 Operating basic pl ayback functions via the remote control (Simple remote control) Use the follo wing remote control ke ys to operate (playback, stop, skip, etc.) your iPod/iPhone. Press l REC to enable the Simp le remote control. Press l REC again to return to the Menu bro wse control[...]

PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 65 Use iPod/iPhone to start playback. • This unit, which is placed in the main zone, functions as follows when iPod/iPhone controls are used to start playback. – The input source switches to DOCK (iPod) when this unit is turn ed on. – When this unit is in standby mode when iPod/iPho[...]

PLA YBACK En 66 Y ou can connect a Y amaha Bluetooth w ireless audio receiver (such as the YB A-10, sold separately) to this unit and enjoy wireles s playback from Bluetooth-compatible portable music players. J 1 Connecting a Y amaha Bluetooth wireless audio receiver Use the dedicated cable to connect the dock to the DOCK jack on the rear panel of [...]

PLA YBACK Playing back tu nes from Blue tooth™ compon ents En 67 5 Make sure the Bluetooth component recognizes the Blue tooth wireless audio receiver . When the device is recognized , it will appear in the Bluetooth component list, for example as “YBA-10 Y AMAHA. ” 6 Select the Bluetooth wir eless audio receiver fro m the Bluetooth component[...]

En 68 SETUP Settings, such as the name of an input source or the icon displayed for an input so urce can be changed from the Input menu. Configuring input sources The name of an input sour ce an d its icon, as well as other input source settings, can be changed from the Input menu displayed on the TV screen . 1 Press j ON SCREEN . 2 Use k Cursor B [...]

SETUP Configuring inpu t sources (Input menu) En 69 Input menu ■ Changing an input source name or icon Rename/Icon Select Input source: HDMI1-5, A V1-6, A UDIO1-2, V -A UX, DOCK (iPod), DOCK (Bluetoo th), PHONO, MUL TI CH Changes the input source name (up to nine characters) and icon displayed on the front panel display or TV screen. 1 Use k Curs[...]

SETUP Configuring inpu t sources (Input menu) En 70 ■ Combining HDMI/A V1-2 input source video and audio Audio In Input source: HDMI1-5, A V1-2 Combines video from HDMI or A V input source s with analog/ digital audio inputs in situations such as: – an playback device is connected with an HDMI cable but cannot transmit audio through HDMI – an[...]

En 71 SETUP Configuring inpu t sources (Input menu) ■ Setting the interlock functions with iP od/ iPhone (when a Y amaha iP od wireless receiver is connected) iPod Interlock Input source: DOCK (iPo d) This unit can be automatically operated in conjunction with operations on iPod when the iPod wi reless recei ver is connected to this unit. ■ Out[...]

SETUP En 72 The SCENE function ( ☞ p. 42 ) can be edited from the SCENE menu displayed on the TV screen. Editing a scene V arious settings, such as the name of a scene or the icon displayed for a scene, can be changed from the SC ENE menu. 1 Press j ON SCREEN . 2 Use k Cursor B / C to select “Scene” and press k ENTER . 3 Use k Cursor D / E to[...]

En 73 SETUP Editing the SCENE function (SCENE menu) SCENE menu ■ Registering SCENE function settings Save Registers the set ting currently applied to this unit for e ach SCENE. ■ Adjusting settings registered with the SCENE function Load Loads input sources or sound programs that hav e been registered with the SCENE function, or specif ies whet[...]

SETUP Editing the SCENE function (SCENE menu) En 74 ■ Changing a scene name and icon Rename/Ic on Select Changes the scene name and icon displayed on the front panel display or TV screen. 1 Use k Cursor B / C repeatedly to select “Rename/Icon Sele ct” and press k ENTER . 2 Use k Cursor D / E to choose an icon and press k Cursor C . 3 Press k [...]

SETUP En 75 Sound effects can be adjusted from the Sound Program menu. Editing sound programs Adjust sound field elements (sound prog ram parameters) to achie ve sound effe cts suited to the ac oustics of audio/ video sources or rooms if you are not satisfi ed with the results achiev ed with defa ult sound program settings. Follo w the procedure de[...]

En 76 SETUP Setting sound program parameters (Sound Progra m menu) CINEMA DSP parameters DSP Level Change the ef fect le vel (le vel of th e soun d field effect to be added). Y ou can adjust the level of the sound f ield effect while checking the sound ef fect. Initial Delay Surround Initial Delay Surround Back Initial Delay Initial delay . Presenc[...]

En 77 SETUP Setting sound program parameters (Sound Progra m menu) Liveness Surround Liveness Surround Back Liveness Liv eness. Surround and surround back li veness. Adjusts the reflectivity of the virt ual w alls in the hall b y changing the rate at which the early r eflecti ons decay . The early re flections of an audio source decay much faster i[...]

SETUP Setting sound program parameters (Sound Progra m menu) En 78 Reverb Level Rev erberation le vel. Adjusts the v olume of the rev erberation sound. The lar ger the value, the stronger the reverberation becomes. Decode T ype Selects a surround decoder to be us ed with a sound program in the MO VIE category . J 1 Parameters usable in certain soun[...]

SETUP Setting sound program parameters (Sound Progra m menu) En 79 Front Presence R Leve l Adjusts the volume of the front presence R channel. J 1 Parameters usable in surround decoder Decode T y pe Selects a surround decoder . Dolby PLIIx Musi c and Dolby PLII Music onl y Panorama Adjusts the soundscape of the front sound field. Sends front left/ [...]

SETUP En 80 V arious settings, such as speaker volume or HDMI functions, can be changed from the Setup menu. Operating the Setup menu 1 Press j ON SCREEN . 2 Press k Cursor B / C repeatedly to select “Setup” and press k ENTER . 3 Use k Cursor D / E to select a menu and press k ENTER . Setup menu setting 4 Use k Cursor B / C to select an item an[...]

En 81 SETUP Setting various fun ctions (Setup menu) Setup menu Manages settings for speakers Speaker Setup items ■ A utomatic speaker se tup Au t o S e t u p Optimizes the speak er configurat ion automatically u sing YP A O ( ☞ p. 32 ). ■ Manual speak er setup Manual Setup The follo wing parameters can be specified m anually . Power Amp Assig[...]

SETUP Setting various fun ctions (Setup menu) En 82 Configuration Adjusts the output characteristics of the speakers based on manually set paramete rs. Front Selects the size (sound reproduc tion capacity) of the front speakers. J 1 Center Selects the size of the center speak ers. Surround Selects the size of the surround speakers. Surround Back Se[...]

SETUP Setting various fun ctions (Setup menu) En 83 Subwoofer Confirms the su bwoofer . Phase Sets the phase of the sub woofer if the bass audio is lacking or unclear . Extra Bass Allows th e front channel lo w-frequenc y components to be produced exclusi vely b y the subwoofer , or by both the subwoofer and the front speakers. Bass Cross Ov er Set[...]

SETUP Setting various fun ctions (Setup menu) En 84 Parametric EQ Adjusts sound quality of tone using a parametric equalizer . PEQ Select Select an equalizer type. PEQ Data Copy Select 1 of the 3 parametric equalizer ty pes acquired with automatic setup and manually co py that information to the manual adjustments. Front L / Front R / Center / Surr[...]

SETUP Setting various fun ctions (Setup menu) En 85 Setting the audio output function of this unit Sound Setup items ■ Synchr onizing audio/video output Lipsync Adjusts the delay betwe en audi o and video output (Lipsync function). Mode Selects a compensation method fo r the delay between audio and video output. Delay ■ A uto-adjusting Dolby Di[...]

SETUP Setting various fun ctions (Setup menu) En 86 ■ Setting the startup v olume Initial Volume Sets the initial v olume for when this recei ver is turned on. When this parameter is set to “Of f, ” the volume is set at the le vel when the receiv er last entered standby mode. J 1 ■ Adjusting DSP effect and v olume level Adaptive D SP Level [...]

SETUP Setting various fun ctions (Setup menu) En 87 ■ Adjusting resolution and aspect ratio with con version of video signal to HDMI Processing Adjust resolution and as pect ratio with con ver sion of video input to HDMI video (upscaling). Resolution Aspect Setting HDMI functions HDMI Setup items Off (Default) R esolution and aspect r atio are n [...]

SETUP Setting various fun ctions (Setup menu) En 88 ■ Receiver operation vi a TV (HDMI Control) HDMI Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (e.g., P anasonic VIERA Link), you can use the remote controls of those device s to operate some o[...]

En 89 SETUP Setting various fun ctions (Setup menu) ■ Specify whether or not audio signal is output through this unit and a TV Audio Output Choose whether audio is played back through this unit or through a TV . Amp Specify whether or not audio si gnal is output through this unit. OUT1 Specify whether or not audio signal is output th rough a TV c[...]

En 90 SETUP Setting various fun ctions (Setup menu) Setting this unit’ s multi-zone function Multi Zone Setup items ■ Adjusting Zone2 v olume Zone2 Set Max Volume Specify the maximum v olume lev el in Zone2 so that sound is not too loud. Initia l Volume Specify the initial volume le vel in Zone2 when this unit is turned on. ■ Setting the par [...]

En 91 SETUP Setting various fun ctions (Setup menu) ■ Goes enter standby mode automaticall y when y ou leave it without operating Auto Power Down If you do not operate this unit or use the remote control for an extended period of time, it will au tomati cally go into standby mode (Auto Power Do wn function). This function’ s default setting is [...]

En 92 SETUP Setting various fun ctions (Setup menu) ■ Setting TRIGGER OUT functions T rigger Output Sets the TRIGGER OUT jack to function synchronized with power status of each zone or input switching. T rigger Mode Specify the condition for the TRIGGER OUT jack to function. T arget Zone Specify the zone with which the TR IGGER OUT jack functions[...]

SETUP Setting various fun ctions (Setup menu) En 93 ■ Prohibiting setting c hanges Memor y Guard Prohibits setting changes to pre v ent carele ss cha nges being made to the settings on Setup menu. Language Select the language used for display of menus and messages. J 1 Choices: English (English), (Japanese), (French), (German), (Spanish), (Russia[...]

SETUP En 94 A va riety of information for this unit can be displayed. Selecting information 1 Press j ON SCREEN . 2 Use k Cursor B / C to select “Informati on” and press k ENTER . 3 Use k Cursor D / E to select an Information menu and press k ENTER . ■ A udio information Displays information on the current audio signal. ■ Video information [...]

SETUP En 95 Y ou can operate an external component such as TV and DVD player with the remote control of this un it by setting the code for ex ternal com ponent (remote control code). The remote control code can be set for each input source. Individual setting allo ws you to switch external components seamlessl y depending on the selected input sour[...]

SETUP Controlling oth er components with the remote cont rol En 96 Default remote control code settings The follo wing remote control codes are assigned to input sources as factory def ault setti ngs. For a complete list of av ailable remote contro l codes, refer to “ Remote Control Code Search ” in the CD-R OM. Registering remote control codes[...]

SETUP Controlling oth er components with the remote cont rol En 97 4 Enter a remote control code “2064” using m Numeri c keys . J 1 Once the remote control code is registered successfully p SOURCE/REC EIVER will bli nk twice. 5 T o switch between BD player linked to scene selections, press i SCENE and at the same time press d HDMI2 and hold it [...]

SETUP Controlling oth er components with the remote cont rol En 98 2 Select the opera tion mode (SOU RCE, RECEIVER or TV m ode) for which functions will be assigned to remote control keys. • Selecting the SOURCE mode Press d Input sele ctor to enter SOURCE mode. In this mode, remote control f unctions for the selected input source can be assigned[...]

SETUP Controlling oth er components with the remote cont rol En 99 ■ Clearing the assignment of each key 1 Press o CODE SET using a pointed object such as the ti p of a ballpoint pen. 2 Press d Input selec tor , p SOURCE/ RECEIVER or n A to select the mode for which remote control key operation wi ll be cle a re d . 3 Enter “9991” using m Num[...]

SETUP Controlling oth er components with the remote cont rol En 100 Resetting all remote control codes Resetting all remote control codes for external components to the initial factory settings. 1 Press o CODE SET using a pointed object such as the ti p of a ballpoint pen. 2 Press p SOURCE/RECEIVER on the r emote control. 3 Enter “9981” usin g [...]

SETUP En 101 The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 1 Switch this u nit to the standb y mode. 2 Press MAIN ZONE A while pressing and holding STRAIGHT on the front panel. Release STRAIGHT when “AD[...]

SETUP Extended functiona lity tha t can be config ured as needed (Advan ced Setup menu) En 102 A voiding crossing remote control signals when using multiple Y amaha receivers The remote control of the unit can only receive signals from a receiv er which has an identi cal ID (remote control ID). When using multiple Y amaha A V receivers, you can set[...]

En 103 SETUP Extended functiona lity tha t can be config ured as needed (Advan ced Setup menu) Initializing various se ttings for this unit Initializes v arious settings stored in this unit and sets it back to default. Select the items to be init ialized from the follo wing. When an option other than CANCEL is selected, the applicable default setti[...]

SETUP En 104 This unit supports the HDMI Control function, which allo ws you to operate external componen ts via HDMI. If de vices that support HDMI Control (e.g., Panasoni c VIERA Link-compatible TVs, D VD/Blu-ray Disc player s, etc.) are connected J 1 , remote controls for those de vices can be used to perform the following operations: – Power [...]

SETUP Using the HDMI Control function En 105 ■ Switching the input sour ce on this unit automatically when listening to TV audio When the HDMI Control ( ☞ p. 104 ) is operating properly , the input source of this unit is automatically changed to match operations carried out on the TV . When the TV is connected with HDMI OUT 1, the default inpu [...]

SETUP Using the HDMI Control function En 106 6 Make sure that “HDMI Contr ol” is “On” When “HDMI Control” is set to “Off, ” press k ENTER and k Cursor B / C to set to “On. ” 7 Press k Cursor C to select “Control Select” and press k ENTER . 8 Use k Cursor B / C to select the HDMI OUT jack connected to the TV . 9 Press k Curso[...]

SETUP Using the HDMI Control function En 107 5 Make sure that “HDMI Contr ol” is “On. ” When “HDMI Control” is set to “Off, ” press k ENTER and k Cursor B / C to set to “On. ” 6 Press k Cursor C to select “Control Select” and press k ENTER . 7 Use k Cursor B / C to select the HDMI OUT jack connected to the TV . 8 Press k Cur[...]

SETUP En 108 This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reprod uce separat e input sources in the main zone and the second zone (Zone2). Y ou can control this unit from the second zone using the supplied remote control. Connecting Zone2 Y ou need the following additional eq uipment [...]

SETUP Using multi-zone configuration En 109 Controlling Zone2 The remote control can be us ed to select and control Zone2 de vices. The av ailabl e operations are as follows: • Selecting the input sou rce of Zone2. • T uning into FM or AM when “TUNER” is selected as the input source of Zone2. • Adjust the v olume of Zone2 devices (when co[...]

En 110 APPENDIX Refer to the table below when this unit does not function properly . If the problem you are experiencing is not listed belo w , or if th e instructions below do not help, turn of f this unit, disconne ct the power cable, and contact the nearest authorized Y amaha dea ler or service center . General T roubleshooting Problem Cause Rem[...]

En 111 APPENDIX Troublesho oting No picture. T he video signal ou tput from this unit is no t supporte d by a monitor connected t o this uni t via the HDMI OUT 1-2 jacks. Displays th e Advanc ed Setup menu and select “V IDEO” in “IN IT” to reset the video parameters. 103 Displays th e Advance d Setup menu and set “MON.CHK” to “YES. ?[...]

En 112 APPENDIX Troublesho oting HDMI™ The audio input sources cannot be pla yed in the desi red digital audio signal forma t. The connect ed component is not set to output the desired digit al audio signal s. Set the pl ayback component properly referring to its ins truction manual. — There is nois e interfer ence from digital o r radio freque[...]

En 113 APPENDIX Troublesho oting T uner (FM/AM) FM AM Problem Cause Remedy See page FM stereo reception is noisy . Y ou are too far from the station transmitter , or the inpu t from the antenna is weak. Check the a ntenna connecti ons. 31 Switch to mona ural mode. 59 Replace the outdoor ant enna with a more sensitive multi-elem ent antenn a. — Th[...]

En 114 APPENDIX Troublesho oting iPod™/iPhone™ Bluetooth™ Display Cause Remedy See page Loading... The unit is in the process of recogniz ing the conne ction with your iPod/iP hone. — The unit is in the middle of acquiring song list s from you r iPod/iPhone . — Connect error There is a p roblem with the signal path from yo ur iPod/iPho ne[...]

En 115 APPENDIX Troublesho oting Remote control Problem Cause Remedy See page The remote co ntrol does not work or function p roperl y . Wrong distan ce or angle. The remote control w ill function within a maximum range of 6 m, and no more than 30 degrees off-axis fr om the fron t panel. — Direct sunl ight or lighting (from an in verter typ e of [...]

APPENDIX En 116 Audio information Audio and video sync hronization (Lipsync) Lip sync, an abbrev iation for lip synchr onization, is a technical term that in volves both a problem, and the capab il ity of maintaining audio and video signals synchronized during po st-p roduction and transmission. Whereas the audio and video latency requir es complex[...]

APPENDIX Glossary En 117 DSD Direct Stream Digital (DSD) technolo gy stor es audio sig nals on dig ital storage media, such as Super Audi o CD s. Using DSD, signals are stored as single bit values at a high-frequ ency sampling rate of 2.8224 MHz, while noise shaping and o versampling are us ed to r educe dist ortion, a common occurrence with very h[...]

APPENDIX Glossary En 118 S-video signal W ith the S-vide o signal system, the vi deo signal normally transmitted using a pin cable is separated and transmitte d as the Y signal for the luminance and the C signal for the chrominance through the S-video cable. Using the S VIDEO jack eliminates video si gnal transmission loss and allows recordin g and[...]

APPENDIX En 119 ■ HDMI signal compatibility Audio signals • If the input source comp onent can de code the bi tstream au dio signals o f audio comm entaries, y ou can pl ayback the a udio sources wi th the audi o commentaries mixed down by using the digit al audio inp ut (optica l or coaxial ) connecti ons. • Refer to the supplied i nstructio[...]

APPENDIX En 120 ■ Input jacks • Analog audio Audio x 6 (PHONO, A V5, A V6, A UDIO1, A UDIO2 , V -A UX) MUL TI CH INPUT x 1 (8ch Input) • Digital audio Optical x 2 (A V1 , A V4) Coaxia l x 2 (A V2, A V3) •V i d e o Composite x 5 (A V3, A V4, A V5, A V6 , V -AUX) S-V ideo x 1 (A V5) [ U. K. a nd E u ro p e mo d el s] Component x 2 (A V1, A V2[...]

APPENDIX Specifications En 121 • Headphone Jack Rated Output/Impedance A V5, etc. (1 kHz, 50 mV , 8 Ω ) .............. ............ ........ 100 mV/560 Ω • F requency Response A V 5 to FR ONT .. ............ ............ .......... . 10 Hz to 100 k Hz, +0/-3 dB • T otal Harmonic Distortion PHONO (20- 20 kHz, 1V) ... ............ ...........[...]

APPENDIX En 122 Numerics 5 channel speaker layout ...... ................................. .................. ..... 15 5.1-channel speaker layout..... ........... ........... ........................... ..... 15 7.1-channel speaker connect ion ............ ........... ............ ........... ..... 17 7.1-channel speaker layout..... ........... ...[...]

APPENDIX Index En 123 Liveness, Sound Program menu ...................... ............ ........... ..... 77 Load, SCENE m enu ........ ......... ........... ......... ........... ........... ......... . 73 Low-frequency sound adjustment ............ ...................... ......... ..... 41 M Manual Preset ......... ......... ........... ......... [...]

APPENDIX Index En 124 Y YPAO . ......... ........... ......... ........... ......... ........... ......... ........... ......... . 32 Z Zone2 Set, Mul ti Zone ........... ........... ......... ........... ........... ........... . 90[...]

© 2010 Yam aha Corporation YC515A0/OMEN2[...]

- 1 - TV A.R. Sy stems 0320 Acme 0342 Acura 0323, 03 43 ADC 0337 Admiral 0054, 0178, 0336 , 0337, 0339, 0346 , 0347 Adve nt 0158 Adventura 0057 Adyson 027 7, 0282, 0342 Agashi 0277, 0282 Agazi 0337 Aiko 027 7, 0282, 0320, 0323, 0342, 0343 Aim 0320 Aiwa 0078, 0379 Akai 0050, 0055, 0109, 0159, 0181, 0277 , 0282, 0320, 0323 , 0340, 0343, 0349 , 0350 A[...]

- 2 - Genexxa 0320, 03 40, 0347, 0350 GFM 0128, 0227 Giant 0282 Gibralter 0008, 0030, 0050, 0062 GoldHand 0277 Goldline 0320 GoldStar 0007, 0008, 0012, 0026, 0031, 0050 , 0053, 0161, 0277 , 0282, 0320, 0323 , 0342, 0343, 0346 , 0349, 035 0 Goodmans 0 246, 0272, 0282, 0320, 0323, 0337 , 0343, 0344, 0349 , 0350, 0462, 0473 , 0477 Gorenje 0161, 0351 G[...]

- 3 - 0239, 0256, 0257 , 0259, 0261, 0263 , 0267, 0280, 0281 , 0287, 0296, 0299 , 0301, 0303, 0305 , 0313, 0319, 0320 , 0324, 0333, 0339 , 0342, 0349, 0350 , 0353, 0357, 0360 , 0380, 0383, 0452 , 0459, 046 0 Philips Magnavox 0011, 0032, 0033 Phoenix 0161, 0277, 0320, 0339, 0349, 0350 Phonola 0277, 0320, 0339, 0349, 035 0 Pilot 0 007, 0008, 0050 Pio[...]

- 4 - Y amaha 0008, 0026, 0050, 0053, 0080, 0081 , 0082, 0083, 0086 , 0087 Y amishi 0282, 0320 Yo k a n 0 3 2 0 Y oko 0161, 0277, 0282, 0320, 0323, 0337 , 0340, 0342, 0343 , 0349, 035 0 Y orx 0340 Zanussi 0 282, 0346 Zenith 0008, 0028, 0029, 0030, 0031, 0054 , 0061, 006 2 VCR ABS 10 16 Adventura 1069 Adyson 100 8 Aiwa 1024, 1026, 1027 , 1069 Akai 1[...]

- 5 - Sinudyne 1028 So lavo x 103 0 Sonic Blue 1022, 1123 Sonneclair 1008 Sonoko 1009, 1025 Sontec 1031 Sony 1001, 1016, 1048, 1053, 1073, 1074 , 1080, 1081, 1082 , 1083, 1108, 1118 , 1216 Stack 1016 Stack 9 1016 Standard 100 9, 1025 Stern 1009 STS 1068 Sunkai 1024 Sunstar 1026 Suntronic 1026 Sunwood 1008, 1029 Superscan 1020 Sylvania 1 020, 1068, [...]

- 6 - 2309, 2310, 2311 , 2344, 2345, 2347 , 2379 Pointer 2362 Polaroid 2125, 2215, 2235 Portland 2362 Pow erpoint 2363 Prima 2 252 Proceed 2130 Proscan 2156 Prosonic 2360, 2377 Protron 2202 Provisi on 2358 Pye 2144 Qwestar 2148 Raite 2380 RCA 2021, 2029, 2104, 2105, 2131, 2149 , 2156, 2157, 2229 RedStar 2356, 2360, 2362 Regent 2153 Reoc 2355 Rimax [...]

- 7 - To c o m 3 0 6 7 T orx 3017 To s h i b a 3 1 2 2 T ristar 3127 T udi 3102 T usa 3072, 3123 TV86 3077 Unika 3065, 30 70 United Cable 301 8, 3119 Universal 3065, 3070 Universum 3097, 3099 V2 3127 V ideoway 3019 V iew Star 3074, 30 77, 3079 V ie wmaster 3127 V ision 3127 V isiopass 3097, 3100, 3101 V ortex V iew 3127 W ittenberg 3098 Zenith 3113[...]