Acer ALH-616ds инструкция обслуживания

Dual-Speed Ethernet Hub User's Guide ALH-616ds A c e rHub[...]

[...]

[...]

[...]

[...]

Quick Installation Guide 1. Unpack the AcerHub ALH-616ds dual-speed Hub and it'saccessories (refer section 1.3). 2. Connect the Hub to the external Power supply (refer to section 2.4.1) 3. Use the normal ports to connect to PCs and computers. 4. Use the uplink port to connect to another hub or LAN switch.[...]

C ongratulations on your purchase of the AcerHub 616ds. The AcerHub ALH- 616ds is a 16-port dual-speed fast Ethernet repeater hub for connection with multiple PCs to a workgroup LAN (Local Area Network) environment to sharenetwork resources. 1.1 Product goal AcerHub ALH-616ds provides high-speed and easy access to the LAN and Intranet both for SOHO[...]

large network,refer section 3.1 for details.) • Built-in switch auto-disable function to avoid data looping when stacking • External switching power supply for lower power consumption and heat emission • Compact design for SOHO desktop environment for easy networking 1.3 Product configuration The product configuration inside the package is sh[...]

This chapter will guide you through how to install the AcerHub ALH-616ds. It includes procedures for connecting to the external power supply , installing the hub on your working surface, connecting the Hub to your computer , and guidelines to see if it works well. Before setting up your hub, please take note of the front and rear panel of this hub,[...]

Figure 2-1 Get the hub and power adapter 2.1.2 Place the hub on the desktop and remove the packing box of the power adapter , as shown in Figure 2-2. Figure 2-2 Put the hub on desktop and find the proper power adapter 2-2[...]

2.1.3 V erify it's a 5V ,3A power adapter by looking at the indicating label. If the adapter is correct, please stretch the cable and plug the cord into the power jack of the hub, as shown in Figure 2-3. AcerSOHO Series Figure 2-3 Connect to the power adapter 2.1.4 Once the hub is connected to the power adapter , please connect the power adapt[...]

2.1.5 Plug the power cord into the outlet on the wall and check if the power LED lights up. If it lights up, then the hub is ready to be connected to the network, as shown in Figure 2-5. Figure 2-5 Power on the hub and make it ready 2.2 Installing the hub on your working surface Y ou have to find a solid working surface to place the hub and make su[...]

Figure 2-6 Lay hub on stable desktop 2.2.2 If you are installing more than one hub, please turn off the power of all hubs first. Then you can get another hub and place it above the previous one on the working surface, as shown in Figure 2-7. Finally , put the stacking kit inthe middle of two sides and click into the stacking hole in the plastic hou[...]

2.2.3 Get the stackable cable and connect the cable to the stacking connectoron the hub, as shown inFigure 2-8. Connect "Down" SCSI port of the upperhub to "Up" SCSI port of the lower hub. Any loose connection of the stackablecable will cause problems with network performance and quality . Figure 2-8 Connect hubs by stacking cab[...]

Figure 2-9 Stack multiple hubs together 2.3 Connecting to computers 2.3.1 Make sure the hub is ready for networking by checking if the PWR indicator displays. 2.3.2 See if the computer is working and find the RJ-45 connector of the adapter card in computers. Y ou can connect UTP (Unshielded T wistered Pair) cables from normal ports of the hub to co[...]

2.3.3 Arrange the route for cabling if no fixed cabling box is provided. Otherwise, It's right way to connect from your computer to the fixed cabling box on your working surface and plug the other end of the cable to the RJ- 45 connector on the hub, as shown in Figure 2-1 1. Figure 2-1 1 Connect UTP cable from hub to computers 2.3.4 After conn[...]

Figure 2-12 Check the Link LEDs both on hub and adapter card 2.4 Does the hub work well? Y ou can observe the LED status to see if the hub works fine. The meanings of LEDs are defined in section 2.4.1. 2.4.1 LED overview The locations of LED indicators are shown in Figure 2-13. Figure 2-13 LED overview ACT 2-9 ALH-616ds[...]

There are three groups of LED indicators in the front panel: • System status indicators: Indicate the overall system status of the hub. It includes system PWR, Fan Err ., Master , Slave indicators, Collision of 10 and 100M, and Bridge function • Network status indicators: Indicate working status of each connection port, It includes port 100/10M[...]

2.4.3 Network Status Indicators There are 3 LED indicators to indicate the network status of each connection port. Note : It's normal either Master or Slave LED will display when hubs are stacking. Note : The difference between Master hub and Slave hub will be explained in chapter 3. Collision : Indicate if a collision occurs in 10Mbps or 100M[...]

6 4 8 Figure 2-15 Network Status Indicators 100/10 : Indicates if the port is working at 100Mbps or 10Mbps. Color On/Off Indication Green On 100Mbps Off 10Mbps LNK/ACT : Indicates if the port is linked to another port or receiving data. Color On/Off Indication Green On Link succeeds Blink Receiving Off Link fails 2.4.4 Network utilization indicator[...]

The number of utilization is in percentage. For example, "15" of "100M" means 15% of 100Mbps, "55+" of "10M" means the utilization is more than 55% of 10Mbps. Figure 2-16 Network utilization indicators ROW Speed Color Utilization 10 M 10Mbps Green 5, 15, 25 Orange 35, 55+ 100 M 100Mbps Green 5, 15, 25 Orange [...]

This chapter describes the network topology for hybrid 10Mbps and 100Mbps networks, cabling requirement for connections, the interoperability between hubs and switches and the function of bridge Up-Link port. Please turn over the page to see the different T opologies. 3.1 Network topology for AcerHub ALH-616ds : The factors for ALH-616ds dual-speed[...]

Figure 3-2 Master and Slave hubs in stacking ALH-616ds. Note : 1. T o concern the convenience of the cross-wiring connection between hubs, ALH-616ds provide 1 normal port (marked as "II) and 1 cross-over port (marked as "X"). These 2 ports are wired to each other by different wiring assignments. 2. The up-link port utilizes the first[...]

• By way of an uplink port with a Bridge function, the limitations on 100Mbps hub count(maximum 2) can be eliminated. The hub count is unlimited and cable length between hubs can reach 100 meters, as shown in Figure 3- 4. Figure 3-4 Unlimited cascading of ALH-616ds. • All PCs with 10Mbps network adapter cards transmit data at 10Mbps and form th[...]

• The data in 10Mbps or 100Mbps domain will be inter-connected by internal built-in switch in the Master hub consequently . • All hubs delivering data by the shared-bus always work on half-duplex mode;that is, data can be sent or received at one time in one direction. 3.2 Interconnection to Hubs and Switches 3.2.1 Connecting to Ethernet Hubs : [...]

3.2.2 Connecting to Ethernet Switches : The factors governing hub and switch interconnection are: • The hubs are only connected to Ethernet switches by an uplink port. ALH-616ds will automatically work at 100Mbps network speed when connected to 10/100Mbps Ethernet switching ports and it will work at 10Mbps network speed if connected to 10Mbps swi[...]

Symptoms All LEDs are off Link LED of a connected port is off 100 LED is not lit when connected to a 100 NIC or 100 Hub(but Link LED is lit.) Possible Reason Suggestions The hub is not receiving DC power 1.The UTP cable is not securely connected 2.The port is bad 3. If the other party is a PC, the Network interface card(NIC) could be not working 1.[...]

LED state Stacking condition Result & action Malfunction, Contact your vendor For all ALH-616ds ,both standalone and stacking condition Both Master And Slave Led lit on None or Master and Slave LED lit on For all ALH-616ds ,both standalone and stacking condition Malfunction, Contact your vendor it is ok ALH-616ds is standalone only Master LED l[...]

Appendix A.Specifications Network Interface 16-port 10/100 dual-speed auto-detection function • 10Mbps Ethernet IEEE 802.3 10Base-T • 100Mbps Ethernet IEEE 802.3u 100Base-TX One of the ports(Port NO.1)has two RJ-45 connector to provide either normal or uplink connection. Physical Dimension (From front View) Width 247 mm Depth 163 mm Height 45 m[...]

Product Limited Warranty Acer Netxus Incorporated (ANI) warrants its product to be free from defects in materials and workmanship, under normal use and service, for the following lengths of time from the date of purchase from ANI or its Authorized Resellers. Network adapter card Limited Lifetime Unmanaged hub *Limited Lifetime Dual-speed hub *3 yea[...]

Acer Computer International Ltd. T aiwan Branch T el: 886-2-2713 9099 ext.7293 Fax: 886-2-2718 4895 http://www .aci.acer .com.tw Acer America Corporation T el: 1-408-432 6200 Fax:1-408-922 2993 http://www .acer .com/aac Distribution/Information Hotline: 1-800-369 6736 Fax: 1-408-432 0496 http://www .acer .com/aac/aod Acer Latin America Inc. T el: 1[...]

100% Recyclable Paper Acer Netxus Inc. A Communications Company of Acer P/N: 49.22013.101[...]