Acer ALW-3016 инструкция обслуживания

16-port 10/100Mbps Switch User's Guide Acer Switch AL W-3016 new ALW-3016-UM 10/13/99 11:27 AM ›¶›– 1[...]

I Copyright Copyright © 1998-1999 Acer Netxus Inc. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior[...]

T able of Contents Chapter 1 Overview 1.1 Product goal....................................................................... 1 1.2 Product configuration......................................................... 1 Chapter 2 Make your Switch ready 2.1 Installing the switch............................................................ 2 2.2 Connecting t[...]

Thanks for your purchase of the AcerSwitch 3016. AcerSwitch is an 16- port dual speed switch works as backbone switch in SOHO environment for connecting the server or heavy-load user or hubs in LAN environment. 1.1 Product goal AcerSwitch AL W-3016 provides high-speed and easy access to the LAN and Intranet for corporations. It allows data transmis[...]

This chapter will guide you through how to install the AcerSwitch AL W- 3016. It includes procedures for connecting to the external power supply , installing the switch on your working surface, connecting the switch to your computer , and guidelines to see if it works well. Before setting up your switch, please take notes of the front and rear pane[...]

2.2 Connecting to the power supply Carefully unpack the AcerSwitch AL W-3016 and it's accessories. For the first time that you use this switch, please make sure there is all the same as the checking list in the package. The procedure for connecting to the power will be: 1. Place the switch on the desktop and remove the packing box of the power[...]

2.3 Rack mounting T o install the AL W-3016 switch in a 19-inch rack, please follow these steps: 1. If the switch has rubber footpads on the bottom of the unit, please remove them. 2. Locate the rack mounting holes on both sides of the switch (see Figure 2- 3). 3. Using a cross-head screwdriver , attach the two mounting brackets to both sides of th[...]

2.4 Connecting to computers Make sure the switch is ready for networking by checking if the PWR indicator displays. 1. Shut down the computer and install an adapter card in. 2. Plug in the one end of UTP cables to the RJ-45 phone jack of adapter . 3. Plug the other end of UTP to normal ports of the switch. 4. T urn on the PC and check if the Link L[...]

T able 2-5-1 LEDs definition 2.5.1 System indicators PWR : When the power is connected rightly , the PWR LED will be lit on Green. If the LED is not lit on, then you should check the connection of your power and the outlet of power . Fan Err . : When the fan malfunction at work, then the Fan Err LED will be lit up and blink. And when the fan is fai[...]

This chapter describes the network topology for hybrid 10 Mbps and 100 Mbps networks, cabling requirement for connections, the interoperability between hubs and switches. And tell you how to use the AL W-3016 to expand your port numbers. 3.1 Connecting a hub/switch to normal port Y ou can use the AL W -3016 as a backbone switch in small and medium [...]

3.2 How to use up-link port With up-link port you can use it to cascade to another switch to expand your network. Please refer to the following procedure. 1. Use one end of UTP/STP to connect to the up-link port of AL W-3016 2. Use the other end to connect to the normal port of the new switch 3. Make sure the LNK ACT 100/LNK ACT10 LED is lit then i[...]

Symptoms Possible Reason Suggestion All LEDs are off. The hub is not receiving 1. Check if the power adapter DC power . plug is securely fastened into the AC outlet. 2. Contact you vender if still unworkable. Fan Err . LED is The fan is dead or work 1. Check your fan, maybe you blinking or down abnormal should have a new fan. 2. Contact the vender [...]

Physical Specification Ports 16 dual-speed 10 BASE-T/100 BASE-TX RJ-45 ports 1 Up-Link 10 Base-T/100 Base-TX RJ-45 ports Dimension 440 (Width) x 205(Depth) x 45.2mm(Height) Weight 2.5 Kg Power Switching power supply Input: 100~120/220~240V AC, 50-60Hz LEDs indicator Power , fan error , LNK/ACT , FDX for each port and Speed 10/100Mbps Switch Process[...]

Acer Netxus Incorporated (ANI) warrants its product to be free from defects in materials and workmanship, under normal use and service, for the following lengths of time from the date of purchase from ANI or its Authorized Resellers. Network adapter card Limited Lifetime Unmanaged hub *Limited Lifetime Dual-speed hub *3 year Switch and managed hub [...]

Contact us: Acer Computer International Ltd. T aiwan Branch T el: 886-2-2696 0123 ext.3130 Fax: 886-2-8691 2316 http://www .aci.acer .com.tw Acer America Corporation T el: 1-408-432 6200 Fax:1-408-922 2993 http://www .acer .com/aac Distribution/Information Hotline: 1-800-369 6736 Fax: 1-408-432 0496 http://www .acer .com/aac/aod Acer Latin America [...]

100% Recyclable Paper P/N: 49.23020.001 Acer Netxus Inc. A Communications Company of Acer new ALW-3016-UM 10/13/99 11:27 AM ›¶›– 1 3[...]