Audio Analogue SRL Audio Analogue SRL инструкция обслуживания

AUDIO ANALOGUE soundpleasure puccini INTEGRATED AMPLIFIER OWNER’S MANUAL MANUALE D’ISTRUZIONI[...]

Dear Audiophile, Congratulations and thank you for choosing the PUCCINI Special Edition integrated amplifier . Y ou have acquired an exceptionally musical, high-precision audio component, capable of extraordinary performance in any high-end system. Its refined circuit design yelds great sonic purity whereas its inborn elegance will ensure easy inte[...]

AUDIO ANALOGUE PUCCINI INTEGRATED AMPLIFIER OWNER’S MANUAL MANUALE D’ISTRUZIONI 5 INST ALLA TION INST ALLAZIONE 6 CONTROL COMANDI 7 CONNECTIONS COLLEGAMENTI 9 OPERA TION FUNZIONAMENT O 1 1 REMOTE CONTROL TELECOMANDO 12 SAFETY PRECAUTIONS AND MAINTENANCE PRECAUZIONI DI SICUREZZA E MANUTENZIONE 13 SPECIFICA TIONS SPECIFICHE TECNICHE 15 TROUBLESHO[...]

The shipping box should contain the following items apart from the amplifier and this owner's manual: Remote control T wo AAA size batteries AC power cord W arranty certificate Please check if all has been included: if not, contact your dealer . After opening the box, carefully extract the amplifier and remove its protective plastic bag; check[...]

1 Remote IR Sensor Sensore IR del telecomando Aim remote control to this window to remotely operate the amplifier . Puntare il telecomando verso questa finestrella per agire da lontano sui comandi dell’amplificatore. 2 Power / Standby /Fault Indicator - Spia di Alimentazione / Standby / Guasto Lights green when unit is powered up and operating. L[...]

L R 6 Phono Ground / Massa Giradischi Binding post for the turntable's earth wire. Collegamento per il filo di masso del giradischi. 7 Phono Input (PH1) / Ingresso Phono (PH1) Uncommon on most of today's amplifiers, the Puccini special edition offers an on- board phono preamplifier capable of interfacing both Moving Magnet and high-level [...]

INPUT CONNECTIONS COLLEGAMENTI DEGLI INGRESSI T APE OUT CONNECTION COLLEGAMENTO DELL’USCIT A T APE PRE OUT CONNECTION COLLEGAMENTO DELL’USCIT A PRE SPEAKER CONNECTION COLLEGAMENTO DEI DIFFUSORI 8 The amplifier has six pairs of source input RCA sockets (one phono and five high-level line). As they are all gold-plated, the best connections are ma[...]

Once all connections have been correctly made (please check twice!), make sure the volume control is turned completely anticlockwise then turn the unit on by pressing the power switch near the IEC socket on the rear panel. On the front panel, the power indicator will glow red to indicate that the unit is in the power-up standby . After about one se[...]

Long and exhaustive listening tests have shown that the best sonic performance is obtained after a "burn-in" period of at least 100 hours. Once the unit is fully "burnt-in", best sound quality can be obtained after about 40 minutes warming up. Lunghe e complete prove d'ascolto hanno dimostrato che le migliori prestazioni so[...]

REMOTE CONTROL TELECOMANDO IN+ Press to select next source. Pressing IN+ when source 6 is selected gives source PH1. Premere per selezionare la sorgente successiva. Quando è selezionata la sorgente 6, la pressione di IN+ seleziona la sorgente PH1. IN- Press to select previous source. Pressing IN- when source PH1 is selected gives source 6. Premere[...]

A void opening the unit - No further servicing than that described in this manual should be attempted. Refer all servicing to authorised Audio Analogue dealers and qualified technicians. Do not expose the unit to heat - Keep it away from heat sources such as direct sun, cookers, radiators, etc.. Do not use the unit near water or in excessively humi[...]

Output power (1kHz/230V AC/ both channels driven) Potenza d'uscita (1kHz/230V AC/ entrambi i canali attivi) 2 x 55W / 8 Ω 2 X 85W / 4 Ω Line Input Impedance Impedenza Ingressi Linea 50K Ω Phono Input Impedance Impedenza Ingressi Phono MM 47K Ω / 220pF; MC 100 Ω Nominal Line Input Sensitivity Sensibilità Nominale Ingressi Linea 1V rm[...]

Slew Rate Slew Rate > 10V/s Bandwidth ( 0.1dB) Banda passante ( 0,1dB) 20Hz-20kHz Bandwidth ( 3dB) Banda passante ( 3dB) 5Hz-200kHz (1W / 8 Ω ) Channel Separation (a 1kHz, unused input shorted) Separazione tra i canali (a 1kHz, ing. non usato a 0 Inputs Ingressi MM/MC Phono (PH1), Line 1/6 Nominal voltage supply T ensione d'alimentazione [...]

Power led off No sound Power cord incorrectly inserted and/or amplifier switched off Check that cord is inserted both in the integrated amplifier and in the mains wall socket and that the switch is in the 'ON' position Fuse burnt out Check the fuse in the fuse holder (unplug cord from mains first!!) next to the IEC socket and eventually r[...]

Led 'Power' spento Nessun suono Cordone d'alimentazione non inserito correttamente e/o amplificatore spento Controllate che il cordone sia ben inserito nell'amplificatore e nella presa di rete a muro, e che l'interruttore sia nella posizione 'ON' Fusibile bruciato Controllate il fusibile nel portafusibili (dopo av[...]

audio analogue Head Of fice / Uf ficio commerciale: srl V ia C. Bottai, 88B 51015 Monsummano T erme (PT) Italy tel. (+39) 0572 954513 · fax (+39) 0572 958099 e-mail: info@audioanalogue.com R&D Laboratory / Laboratorio ricerca e sviluppo: V ia XX Settembre, 12 56017 San Giuliano T erme (PI) Italy www .audioanalogue.com info@audioanalogue.com so[...]