Axis Communications M1054 инструкция обслуживания

AXIS M1 054 Network Camera User Manual[...]

About this document This manual is intended for administrators and users of AXIS M1 054 Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-based systems m[...]

Safety This product complies with IEC/EN 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method. The power supply used with this product shall fulll the requirements for Safety Extra Low Voltage (SEL[...]

AXIS M1054 Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS M1054 Network Camera T able of Contents Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Check the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

AXIS M1054 Network Camera Hardware Overview Hardware Overview 9 6 7 3 4 5 1 8 1 1 1 2 1 3 1 4 2 1 0 1 Lens with Status LED indicator 2 Microphone 3 Light (white illumination LED) 4 PIR sensor 5 Speaker 6 Network connector (RJ-45) 7 Lock ring 8 P art number (P/N) & Serial number (S/N) 9 P ower connector 1 0 I/O terminal connector 1 1 Control but[...]

AXIS M1054 Network Camera Hardware Overview • Digital output – For connecting external devices such as relays and LEDs. Connected devices can be activated by the VAPIX® Application Programming Interface, output buttons on the Live View page or by an Action Rule. The output will show as active (shown under System Options > P orts & Devic[...]

AXIS M1054 Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating systems. See Tec[...]

AXIS M1054 Network Camera Access the Product To prevent network eavesdropping, the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certicate. HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt trafc between web browsers and servers. The HTTPS certicate ensures encrypted exchange o[...]

AXIS M1054 Network Camera Access the Product Controls on the Live View P age Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG. Select a stream prole for the Live View page from the Stream Prole drop-down list. For information about how to congure stream proles, see page 18 . Click Puls[...]

AXIS M1054 Network Camera Access the Product For more information about action rules, see Events on page 34 . To show the manual trigger buttons in the Live View page: 1. Go to Setup > Live View Cong . 2. Under Action Buttons , select Show manual trigger button . AXIS Media Control viewer toolbar The AXIS Media Control viewer toolbar is avail[...]

AXIS M1054 Network Camera Access the Product With the PTZ Control Queue enabled the time each user is in control of the PTZ settings is limited. Click the buttons to request or release control of the PTZ controls. The PTZ Control Queue is set up under PTZ > Control Queue . Click the Emulate joystick mode button and click in the image to move the[...]

AXIS M1054 Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available stream pro?[...]

AXIS M1054 Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Windows Control P[...]

AXIS M1054 Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Live View page[...]

AXIS M1054 Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to all setting[...]

AXIS M1054 Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . You can congure the following: • Video stream settings. See page 17 . • Stream proles. See page 18 . • Camera settings. See page 19 . • View area. See page 19 . • Overlay image. See page 20 . • P[...]

AXIS M1054 Network Camera Video and Audio • Maximum frame rate . To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions. • Overlay setti[...]

AXIS M1054 Network Camera Video and Audio For quick setup, use one of the predened stream proles. Each predened prole has a descriptive name, indicating its purpose. If required, the predened stream proles can be modied and new customized stream proles can be created. To create a new prole or modify an existing prole, [...]

AXIS M1054 Network Camera Video and Audio 1. Go to Video & Audio > View Area . 2. Select an Aspect ratio and a Video stream resolution . 3. Use the mouse to move and resize the view area. 4. Select Enable PTZ to enable digital PTZ for the view area. 5. Click Save to save the settings. Note The PTZ functionality is useful during installation [...]

AXIS M1054 Network Camera Video and Audio 1. Go to Video & Audio > Overlay Image . 2. Click Browse and browse to the le. 3. Click Upload . 4. The Transparency Settings page is now displayed: - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Example: T o make whi[...]

AXIS M1054 Network Camera Video and Audio Example To display the text “Motion detected” when motion is detected, enter #D in the Include text eld and enter “Motion detected” in the Text eld when setting up the action rule. Privacy Mask A privacy mask is a user-dened area that prevent users from viewing parts of the monitored area. [...]

AXIS M1054 Network Camera Video and Audio • Red — the signal is distorted. Use the Encoding option to select digital audio encoding format. • AAC requires a license for both encoding and decoding. AAC is the least complicated and most widely used codec. If achieving the best possible audio quality is a priority , AAC is the recommended codec [...]

AXIS M1054 Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 18 . • Default Viewer for Browser . See page 24 . • Viewer Settings. See page 24[...]

AXIS M1054 Network Camera Configure the Live View Page • Select Use PTZ joystick mode as default to enable joystick mode. The mode can be changed temporarily from the PTZ control panel. • Select Enable recording button to enable recording from the Live View page. This button is available when using the AMC viewer . The recordings are saved to [...]

AXIS M1054 Network Camera PTZ (Pan T ilt Zoom) PTZ (Pan T ilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area. For more information on view areas, see View Area on page 19 . Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic positio[...]

AXIS M1054 Network Camera PTZ (Pan T ilt Zoom) 4. Select an available preset position and click Apply . 5. Specify the View Time in seconds or minutes. 6. Specify the View Order or select the Random view order option. 7. Click Save . To modify or remove guard tours, go to PTZ > Guard Tour , select the guard tour in the Guard Tour List and click [...]

AXIS M1054 Network Camera PTZ (Pan T ilt Zoom) 5. Viewer — Multiple viewers must wait for their turn. The viewer has 60 seconds PTZ control before control is passed on to the next viewer in queue. 28[...]

AXIS M1054 Network Camera Detectors Detectors Camera T ampering Camera T ampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. T o send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera Tampering . 2. Set th[...]

AXIS M1054 Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion Detection [...]

AXIS M1054 Network Camera Detectors Note • To trigger on small objects or movements, use several small motion detection windows rather than one large window and select a low object size. • To avoid triggering on small objects, select a high object size. • While monitoring an area where moving objects are not expected, select a high history le[...]

AXIS M1054 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available applications, download[...]

AXIS M1054 Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings . 33[...]

AXIS M1054 Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an action rule. Co[...]

AXIS M1054 Network Camera Events For more information, see the online help . Triggers Available action rule triggers and conditions include: • Applications – Use installed applications to trigger the rule. See Applications on page 32 . • Detectors - Audio Detection – Trigger the rule when audio is detected. See Audio Detection on page 3 1 .[...]

AXIS M1054 Network Camera Events Actions Available actions include: • Activate Light – Turn the built-in light on or off. • Output P ort – Activate an I/O port to control an external device. • Overlay T ext – Display an overlay text. See Use Overlay Text in an Action Rule on page 2 1 . • Play Audio Clip – See Audio Clips on page 23 [...]

AXIS M1054 Network Camera Events HTTP Send Images Send Notication Send Video Clip HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperT ext Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicate. If there is a proxy between the Axis product an[...]

AXIS M1054 Network Camera Events 3. Click OK . To use the schedule in an action rule, select the schedule from the Schedule drop-down list in the Action Rule Setup page. Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences an[...]

AXIS M1054 Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 39 . • To set up action rules, see page 34 . • To access recordings, see Recording List on page 39 . • To congure camera controlled storage, see Stora[...]

AXIS M1054 Network Camera Recordings 5. Click Save to save and start the recording. 40[...]

AXIS M1054 Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le. Browse and locate the le and click the Upload Language button. Select [...]

AXIS M1054 Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may acc[...]

AXIS M1054 Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups. 5. Click Save to enable the settings. To access the Axis product via the desired prot[...]

AXIS M1054 Network Camera System Options A Server/Client certicate can be self-signed or issued by a Certicate Authority (CA). A self-signed certicate offers limited protection and can be used before a CA-issued certicate has been obtained. To install a self-signed certicate: 1. Go to Setup > System Options > Security > Cert[...]

AXIS M1054 Network Camera System Options Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled. IPv4 Address Conguration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automat[...]

AXIS M1054 Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.168.0.125 00-40-8c-18-10-00 ping -l 408 -t 192.168.0.125 4. Check that the network cable is connected and then restart the product by disconnecting and reconnecting power . 5. C[...]

AXIS M1054 Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.mycompany.com[...]

AXIS M1054 Network Camera System Options Note • For NA T traversal to work, this must be supported by the router . The router must also support UPnP TM . • In this context, router refers to any network routing device such as a NAT router , Network router , Internet Gateway , Broadband router , Broadband sharing device, or a software such as a ?[...]

AXIS M1054 Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups. To enable and congure SNMP in the Axis product, go to the System Options > Network[...]

AXIS M1054 Network Camera System Options Storage Network Share Network share allows you to add network storage such as a NAS (network-attached storage). The NAS shall be dedicated for recordings and data from the Axis products connected to the network. For information about reference NAS devices, go to www .axis.com/products/cam_companion_software/[...]

AXIS M1054 Network Camera System Options • the static IP address • the default router • the subnet mask • the system time • the IEEE 80 2.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution[...]

AXIS M1054 Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences. Axis S[...]

AXIS M1054 Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem. The curre[...]

AXIS M1054 Network Camera Troubleshooting 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www .axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try the installa[...]

AXIS M1054 Network Camera Troubleshooting Problems with streaming H.264 Problems with AXIS Media Control ( Internet Explorer only ) To enable the updating of video images in Internet Explorer , set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed on your computer . No H.264 displayed in the client Check th[...]

AXIS M1054 Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer . Ensure that mute is not selected and that the volume settings are correct. Check that Enable audio support is selected under Setup > System Options > Security > Audio Support . Check that the correct Audio Input source is selected unde[...]

AXIS M1054 Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Model AXIS M1054 Image sensor 1/4" Progressive scan RGB CMOS Lens 2.8 mm, F2.0 xed iris, xed focus Horizontal angle of view: 84° V ertical angle of view: 48° Light sensitivity 1.2 lux, F2.0 0 lux with illumination LED on [...]

AXIS M1054 Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, IEEE 802.1X* network access control, HTTPS* encryption, digest authentication, user access log. *This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit ( http://www .o[...]

AXIS M1054 Network Camera T echnical Specifications Function/group Item Specications Casing Rear cover: Aluminium Front cover: P olycarbonate Memory 128 MB RAM, 128 MB Flash P ower 4.9-5.1 V DC, max. 6.5 W P ower over Ethernet IEEE 80 2.3af/IEEE 802.3at Type 1 Class 2 (max. 6.49 W) Connectors DC jack RJ45 1 0BASE-T/1 00BASE-TX Terminal blocks w[...]

AXIS M1054 Network Camera T echnical Specifications Digital Input 3 Connect to pin 1 to activate, or leave oating (unconnected) to deactivate 0 to max 40 V DC Digital Output 4 Connected to pin 1 when activated, oating (unconnected) when deactivated. If used with an inductive load, e.g. a relay , a diode must be connected in parallel with the[...]

User Manual V er . M3.7 AXIS M1054 Network Camera Date: December 20 14 © Axis Communications AB, 2014 P art No. 61295[...]