Axis Communications P3301 инструкция обслуживания

AXIS P330 1 Fixed Dome Network Camera User Manual[...]

About this document This manual is intended for administrators and users of AXIS P330 1 Fixed Dome Network Camera, and is applicable to rmware 5.40 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-base[...]

있 습 니 다 . 적 절히 접 지된 STP (shielded twisted pair) 케이 블 을 사용 하 여 제 품 을 연 결 하십 시 오 . Safety Battery The Axis product uses a 3.0 V BR/CR2032 lithium battery as the power supply for its internal real-time clock (RT C). Under normal conditions this battery will last for a minimum of ve years. Low ba[...]

AXIS P3301 Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

AXIS P3301 Fixed Dome Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 8 7 9 1 0 1 Network connector 2 I/O terminal connector 3 Control button 4 Network indicator LED 5 P ower indicator LED 6 P ower connector 7 Audio out 8 Audio in 9 Status indicator LED 1 0 Microphone Connectors and Buttons For technical specications, see page 48 [...]

AXIS P3301 Fixed Dome Network Camera Hardware Overview Network Connector RJ45 Ethernet connector with P ower over Ethernet (P oE). NO NO NO TICE TICE TICE Due to local regulations or the environmental and electrical conditions in which the product is to be used, a shielded network cable (STP) may be appropriate or required. All cables connecting th[...]

AXIS P3301 Fixed Dome Network Camera Hardware Overview Green Steady green for normal operation. Amber Steady during startup and when restoring settings. Status Red Slow ash for failed upgrade. Green Normal operation. P ower Amber Flashes green/amber during rmware upgrade. Note • The Status LED can be congured to be unlit during normal op[...]

AXIS P3301 Fixed Dome Network Camera Access the Product Access the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Firefox with other operating syste[...]

AXIS P3301 Fixed Dome Network Camera Access the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). T o access the product from the Internet you must congure your network router to allow incoming data trafc to the product. To do this, enable the NA T-traversal feature, which will attemp[...]

AXIS P3301 Fixed Dome Network Camera Access the Product The Live View P age The controls and layout of the Live View page may have been customized to meet specic installation requirements and user preferences. Consequently , some of the examples and functions featured here may differ from those displayed in your own Live View page. The following[...]

AXIS P3301 Fixed Dome Network Camera Access the Product The Play button connects to the Axis product and starts playing a media stream. The Stop button stops the media stream. The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specied in the AMC Control P anel. Click the View Full Screen button [...]

AXIS P3301 Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motion JPEG video streams, audio streams and to the list of available[...]

AXIS P3301 Fixed Dome Network Camera Media Streams The AMC Control P anel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured. Open the AMC Control P anel from: • Window[...]

AXIS P3301 Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. Access Audio Streams The Liv[...]

AXIS P3301 Fixed Dome Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page. • Administrators have unrestricted access to all settings. • Operators have access to [...]

AXIS P3301 Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 16 . • Stream proles. See page 18 . • Camera settings. See page 18 . • Overlay image. See page 19 . • Privacy mask. See [...]

AXIS P3301 Fixed Dome Network Camera Video and Audio • Select Aspect ratio correction to improve the appearance of images in the browser when the video stream has a different aspect ratio. Pixels comprising the image are rearranged so as to provide a more accurate representation of the image. • Compression . The compression level affects the im[...]

AXIS P3301 Fixed Dome Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules. See Events on page 30 . • When setting up continuous recording. See Cont[...]

AXIS P3301 Fixed Dome Network Camera Video and Audio Exposure zones - This settings determines which part of the image is used to calculate the exposure. For most situations, the Auto setting can be used. For particular requirement, select a predened area. Exposure priority - When Motion is prioritized and maximum Shutter time is set to a small [...]

AXIS P3301 Fixed Dome Network Camera Video and Audio 3. Click Upload . 4. The Transparency Settings page is now displayed: - To make a color in the overlay image transparent, select Use transparency and enter the RGB hexadecimal value for the color . Example: To make white transparent, enter #FFFFFF . - To scale the image automatically , select Sca[...]

AXIS P3301 Fixed Dome Network Camera Video and Audio Simplex — Network Camera speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. T o transmit audio using the Live View page, the T alk and Microphone buttons must both be active, see AMC Audio Controls on page 1 1 . Simplex[...]

AXIS P3301 Fixed Dome Network Camera Video and Audio Audio Output An external speaker can be connected to the Audio-out connector (a built-in amplier is required for this). The output can be connected to another amplier with speakers. A stereo connector must be used for the audio out. Congure the audio output settings under Video & Aud[...]

AXIS P3301 Fixed Dome Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 18 . • Default Viewer for Browser . See page 23 . • Viewer Settings. [...]

AXIS P3301 Fixed Dome Network Camera Configure the Live View Page Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher . • JRE (J2SE) 5.0 or h[...]

AXIS P3301 Fixed Dome Network Camera Configure the Live View Page For more information about I/O ports, see I/O P orts on page 4 1 . 25[...]

AXIS P3301 Fixed Dome Network Camera Detectors Detectors Camera T ampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up. To congure tampering: 1. Go to Detectors > Camera Tampering . [...]

AXIS P3301 Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window . Set Up Motion[...]

AXIS P3301 Fixed Dome Network Camera Detectors Low level (0%) Even very small objects trigger motion detection. An object that appears in the window triggers motion detection only for a very short time before it is considered as non-moving. Only very bright objects on a dark background trigger motion detection. Recommended values 5–15% 60–90% 7[...]

AXIS P3301 Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For information about available application[...]

AXIS P3301 Fixed Dome Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected. The set of conditions that denes how and when the action is triggered is called an acti[...]

AXIS P3301 Fixed Dome Network Camera Events For more information, see the online help . Add Recipients The product can send media les and messages to notify users about events. Before the product can send media les or notication messages, you must dene one ore more recipients. To add a recipient: 1. Go to Events > Recipients and clic[...]

AXIS P3301 Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 32 . • To set up action rules, see page 30 . • To access recordings, see Recording List on page 32 . • To congure camera controlled storage[...]

AXIS P3301 Fixed Dome Network Camera Recordings 5. Click Save to save and start the recording. 33[...]

AXIS P3301 Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anyb[...]

AXIS P3301 Fixed Dome Network Camera System Options IEEE 802.1X IEEE 80 2.1X is a standard for port-based Network Admission Control providing secure authentication of wired and wireless network devices. IEEE 80 2.1X is based on EAP (Extensible Authentication Protocol). To access a network protected by IEEE 80 2.1X, devices must authenticate themsel[...]

AXIS P3301 Fixed Dome Network Camera System Options To change the date and time settings, select the preferred Time mode under New Server Time : • Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically . • Synchronize with NTP [...]

AXIS P3301 Fixed Dome Network Camera System Options AXIS Video Hosting System (A VHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to nd a local A VHS Service Provider go to www .axis.com/hosting The A VHS settings ar[...]

AXIS P3301 Fixed Dome Network Camera System Options Select Use the host name to set the host name manually . Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes. For more information, see the online help . Link-Local IPv4 Address Link-Local Address is enabled by default and assi[...]

AXIS P3301 Fixed Dome Network Camera System Options FTP The FTP server running in the Axis product enables upload of new rmware, user applications, etc. The FTP server can be disabled under System Options > Network > T CP/IP > Advanced . Note This FTP server has nothing to do with the product’s ability to transfer images via FTP to ot[...]

AXIS P3301 Fixed Dome Network Camera System Options Traps for SNMP v1/v2 are used by the Axis product to send messages to a management system on important events and status changes. Check Enable traps and enter the IP address where the trap message should be sent and the T rap community that should receive the message. The following traps are avail[...]

AXIS P3301 Fixed Dome Network Camera System Options 2. Click Network Share . 3. Enter the IP address, DNS or Bonjour name to the host server in the Host eld. 4. Enter the name of the share in the Share eld. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password. 6. Click Connect . To c[...]

AXIS P3301 Fixed Dome Network Camera System Options To identify the product or test the Status LED, click Flash LED under Identify and specify the duration in seconds, minutes or hours. This can be useful for identifying the product among other products installed in the same location. For information about rmware upgrade, see Upgrade the Firmwar[...]

AXIS P3301 Fixed Dome Network Camera System Options To open the Script Editor , go to System Options > Advanced > Scripting . If a script causes problems, reset the product to its factory default settings, see page 43 . For more information, see www .axis.com/developer File Upload Files, for example web pages and images, can be uploaded to th[...]

AXIS P3301 Fixed Dome Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version. The latest version may contain a correction that xes your particular problem[...]

AXIS P3301 Fixed Dome Network Camera Troubleshooting Emergency Recovery Procedure If power or network connection is lost during the upgrade, the process fails and the product becomes unresponsive. Flashing red Status indicator indicates a failed upgrade. T o recover the product, follow the steps below . The serial number is found on the product’s[...]

AXIS P3301 Fixed Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network. Identify the product using its model or serial number , or by the DN[...]

AXIS P3301 Fixed Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 50 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available. Check in the AMC Control P anel ([...]

AXIS P3301 Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P330 1 Image sensor Progressive scan RGB CMOS 1/4'‘ Lens Varifocal 2.8 – 1 0 mm, F1.3, DC-iris Horizontal angle of view: 72° – 23° V ertical angle of view: 4 1° – 14° Minimum illumination 1 lux,[...]

AXIS P3301 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including ONVIF , specication available at www .onvif.org, as well as VAPIX® and AXIS Camera Application Platform from Axis Communications, specications available at www .axi[...]

AXIS P3301 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Dimensions (HxWxD) 94 mm x 144 mm x 132 mm (3.7'‘ x 5.7'‘ x 5.2'‘) Weight 0.4 kg (0.9 lb .) Included accessories Mounting and connector kits, clear and smoked dome cover , Installation Guide, CD with User Manual, recording softwa[...]

User Manual V er . M2.5 AXIS P330 1 Fixed Dome Network Camera Date: July 20 14 © Axis Communications AB, 20 1 1 - 20 14 P art No. 58800[...]