Chicago Electric 97580 инструкция обслуживания

9.5 AMP MAGNESIUM RECIPROCA TING SA W 97580 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artw[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures. Write the product’ s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product ha[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 3 Distractions can cause you to lose control. 2. Electrical safety a. Power tool plugs must match the outlet. Never modify the plug in any way . Do not use any adapter plugs with grounded power tools. Unmodied plugs and matching outlets will reduce risk of electric shock. b. A v[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 4 Use of these devices can reduce dust-related hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 5 parts can grab the surface and pull the tool out of your control. 6. When using a handheld power tool, maintain a rm grip on the tool with both hands to resist starting torque. 7. Do not leave the tool unattended when it is plugged into an electrical outlet. T urn off the tool[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 6 not being caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease should not use this tool. If you feel any medical or physical symptoms related to vibrat[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 7 and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user , reducing the risk of electric shock. (See 3-Pron[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 8 the sufx “W-A” (“W” in Canada) to indicate it is OK for outdoor use. 6. Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualied electrician before using it. 7. Protect [...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 9 SPECIFICA TIONS Electrical Requirements 120 V~ / 60 Hz/9.5 A Motor No Load Speed 0-2500 RPM Maximum Cut Depth 6 inches Length of Stroke 1-1/8 inch Blade Fastening System T wist Ring Quick Release Chuck for 1/2” Shank Blades Required Blade T ype 1/2” Shank Included Blades Meta[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 10 2. Select a Blade that is appropriate for the task at hand. See the Blade Selection Chart on page 14 for sug - gested blade size and type. 3. Rotate the Chuck (8) counterclockwise to open it. Hold it in the open position. (See Photo previous page.) 4. Insert the 1/2” shank of [...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 1 1 4. There must not be hazardous objects, such as utility lines or foreign objects, nearby that will present a hazard while working. General Operating Instructions 1. T o turn ON the tool, squeeze the T rigger (60). T o turn the tool OFF , release the Trigger . 2. The tool can be[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 12 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power Switch of the tool to its “OFF” position and unplug the tool from its e[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 13 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start 1. No power at outlet. 2. Cord not connected. 3. Carbon Brushes may be worn or damaged. 1. Check power at outlet. 2. Check that cord is plugged in. 3. Inspect Carbon Brushes and replace if necessary .[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 14 P ARTS LIST Part Description Qty . 1 Phillips Pan Head Screw 4 2 Spring W asher m5 2 3 Gear Cover 1 4 Phillips Head Pan Screw 4 5 Spring W asher m5 4 6 Cover Plate 1 7 Retainer Ring 1 8 Chuck (outer Ring) 1 9 T orsion Spring 1 10 Inner Ring 1 11 Compression Spring 1 12 Pin 1 13 [...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 15 ASSEMBL Y DIAGRAM Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.[...]

SKU 97580 For technical questions, please call 1-800-444-3353. Page 16 90 Day W arranty Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the dat[...]