Craftsman 315.11078 инструкция обслуживания

Owner's Manual / 3/8 in. Variable Speed / Reversible CORDLESS DRILL-DRIVER Model No. 315.110780 Save this manual for future reference _l, CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Sears, Roebuck and Coo, Hoffman Estates, IL 60179 USA NRTL 972000-517 4-98[...]

• Warranty .......................................................................................... _ .............................................................. 2 • Introduction and Product Specifications ......................................................................................................... 2 • Rules For Safe Operatio[...]

The purpose of safetysymbolsIs to attractyour attention to possibledangers. The safetysymbols, end the explanations with them, deserve your carefulattention and understanding. The safety warnings do not by themselves eliminate any danger. The instrucUons or warnings they give are not substitutes for proper accident prevention measures. SYMBOL MEANI[...]

RULESFOR SAFE OPERATION (Continued) m NEVER USE IN AN EXPLOSIVE ATMO- SPHERE. Normal sparking of the motor could ignite flammable liquids, gases, or fumes. m m m KEEP HANDLES DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products or any strong solvents to clean yo[...]

RULES FOR SAFE OPERATION (Continued) B An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire and electric shock. If extension cord must be used, make sure: a. That pins on plug of extension cord are the same number, size and shape as those of plug on charger. b. That extensio[...]

The following recommended accessories are currently available at Sears Retail Stores. • 6-Pc. Extra Length Magnite Power Bit Set • High Speed Bits (For Wood or Metal)...3/4 in. Max. • 3D-Pc. Power ScrewddverlNutddver Set and Case • Keyless Chuck (Item No. 9-20988) • 17-Pc. Power Screwddver/Nutddver Set and Case ,_ WARNING: The use of atta[...]

_ WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. WARNING: Do not allow familiarity with your ddll to make you careless. Remember that a careless fraction of a second is sufficient to inflict seve[...]

SWITCH See Figure 2. To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. SELECTOR BAI"rERY CENTERPOSITION (LOCK) SWITCH TRIGGER Fig. 2 VARIABLE SPEED This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch[...]

SWITCH LOCK See Figure 4. The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position. SELECTOR REVERSE CENTER POSITION (LOCK) FORWARD SWITCH TRIGGER Fig. 4 REVERSIBLE See Figure 4[...]

INSTALLING BITS See Figure 6. • Lock the switch tdgger by placing the direction of rotation selector in center position. See Figure 2. • Open or close chuck jaws to a point where the opening is slightly larger than the bit size you intend to use. Also, raise the front of your drill slightly to keep the bit from falling out of the chuck jaws. ?[...]

_lb WARNING: Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible sedous injury. DRILLING See Figure 9. Move the drill bit into the workpiece applying only enough pressure to keep the bit cutting. Do not force or apply side pr[...]

CHUCK REMOVAL See Figures 11, 12, and 13. The chuck must be removed in order to use some accessories. To remove: • Lock the switch trigger by placing the direction of rotation selector in center position. • Insert a 5/16 inch or larger allen wrench (hex key wrench) into the chuck of your drill and tighten the chuck jaws securely. • Tap the al[...]

WARNING: When servicing, usa only identical Craftsman replacement pads. Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their usa. Use clean cloths to remove dirt, dust, oil, gr[...]

- g_ - -I 14[...]

_CRAFTSMAN 3/8 INCH CORDLESS DRILL-DRIVER - MODEL NO. 315.110780 I The model number will be found on e p,ate attached to the motor housing. Always mention the mode' I number in all correspondence regarding your 3/8 in. CORDLESS DRILL-DRIVER or when ordering repair pads. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS 1 2 4 3 Key Part No. Number [...]

For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) For repair service Call 24 hoursa day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts and Repair Center in your area Call 24 hours a day, 7 days a week _ 1-800-488-1222 I-"[...]