Craftsman 315.27984 инструкция обслуживания

OPERATOR'S MANUAL iPR OFESS I ONAL I 1/4 SHEET SANDER DOUBLE INSULATED Model No. 315.279840 _k WARNING: Toreduce tho risk of injury, the user must read and understandthe operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Bevedy Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman[...]

• Warranty .......................................................................................................................................................................... 2 • Infroduction ...................................................................................................................................................[...]

WARNING: Read and understand all Instruc- tions. Failure to follow a]] instructions listed below, may result in eisctric shock, tim and/or serious personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit, Cluttered benches and dark areas invite _cc;dents. • Do not operate power tools in explosive stmo- spheres[...]

SERVICE • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualifiedpersonnel may re,suit in a risk of injury. • When servicing • tool, use only Identical replace- ment parts, Follow ins;:ructions in the Maintenance section of thLs manual. Use of unauthorized parts or failure to follow M[...]

Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool batter and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power rain Minutes "i3me '%, Alte[...]

The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL A DANGER: A WARNING: A CAUTION: CAUTION: MEANING indicates an imminently i-_g.ardous sitL_tion,which, if not avoided, will rssult in death or serious injury. |nd}catesa potentially hazardoussituation,which, if not avoided, [...]

DOUBLE INSULATION Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual thres-wlre grounded power cord. AJi exposed metal parts are isolatedfrom the internal metal motor components with protectinginsulation.Double insulated tools do not need to be grounded. WARNING: The double insulated system is [...]

PRODUCT SPECIFICATIONS Size of Paper ...................................................... 1/4 Sheet Motion ..................................................................... Orbital Orbfta[ Diameter ..................................................... 1/16 in. No Load Speed ............................................... 14,000/min. input ...[...]

UNPACKING This product has been shipped completely assembled. • Carefully remove the too[ and any accessories from the box. Make sure that a_l items listed in the packing mist are inc)uded. • Inspect the too[ carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing materis[ until you have carefully i[...]

INSTALLING ADHESIVE SANDPAPER See Figure 3. •Unp]ug thesander. • If replacing adhesive sandpaper, remove old sand- paperby peeling it off cushion. If replacing regular sandpaper, relsase paper C_T_p by lifting up on paper cramp lever and disengagingit from the tab on the platen. • Remove non-adhesivesandpaper, then lift up on paper damp lever[...]

DUST BAG DUET EXHAUST Fig. 5 TO CONNECT VACUUM HOSE: See Figure 6. When sanding for an extended period of time, you can easily attach the dust collectionsystem of the sander to s vaouum. To Attach: • Unplug the sander. • Remove dust bag from sander. • Attach vacuum hose to dust exhaust. NOTE: Vacuum hose fits inside dust exhaust. • Connect [...]

Do not force. The weight of the unit supplies adequate pressure. Let the sandpaper and sander do the work. Ap- plying additional pressure srowa the motor, rapidly wears sandpaper and greatly reduces sander speed. Excessive pressure will overload the motor causing possible damage from motor overheatingand can result in inferiorwork. Any finish or re[...]

BRUSH REPLACEMENT Rgure 10. • Unp[ug the sander. • Remove screws (3) fl'om top cover of sander. • Remove top cover. • Remove clamp screws (2.). • Remove brush tube clamps (2). • Disconnect red and black lead terminals fl'om brush tubes. • Remove brushassemblies (2). • Check for wear. Replace both brush assemblies when e(th[...]

CRAFTSMAN 114 SHEET PROFESSIONAL DUSTLESS SANDER MODEL NUMBER 315.279840 SEE NOTE t PAGE 15 f J 11_ !.J 1. 14[...]

I CRAFTSMAN 1/4 SHEET PROFESSIONAL DUSTLESS SANDER MODEL NUMBER 315.279840 The model number will be found on a plate a_a_-hed to the motor housing. Always mention the model | number in all correspondence regarding your PROFESSIONAL SANDER or when ordering repair parts. J SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key Pad No. Number 1 660133001 2[...]

Your Home For repair- In your home- of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold itl For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door[...]