Haier DW12-BFE инструкция обслуживания

Domestic Dishwasher DW12-BFE GB Code: 0120502457[...]

.1. NOTICE Carefully read the instructions contained in this manual, as they provide important information which is essential to safe and proper installation, use and maintenance of the appliance. This appliance complies with the following EEC directives: -73/23/EEC of 19/02/73(Low Voltage)and subsequent modifications; - 89/336/EEC of 03/05/89 (Ele[...]

.2. Close-up View (Interior) A B C D E Upper Rack Rack Height Adjustor Top Spray Arm Lower Rack F G H I Washing Filter Bottom Spray Arm Detergent and Rinse Aid Dispenser Third Sprayer Technical characteristics Width 60cm Depth 60cm Height 85cm Capacity 12 standard place settings Mains water pressure 0.03-0.6MPa Power voltage 220-240V~50Hz 2150W Tot[...]

Salt      Salt The hardness of the water varies from place to place. If hard water is used in the dishwasher, deposits will form on the dishes and utensils. The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water. Loading the Salt into the S[...]

.4. GB Detergent and Rinse Aid      Detergent Detergent specifically intended for use with dishwashers must be used. The dispenser must be refilled before the start of each wash cycle following the instructions provided in the "Wash Cycle Table." The detergent dispenser is located on the inside panel of the d[...]

.5. GB Loading the Dishwasher Before placing the dishes in the dishwasher, remove large food particles to prevent the filter from becoming clogged, which re- sults in reduced performance. If the pots and pans have baked-on food that is extremely hard to remove, we recommend that they be allowed to soak before they are washed. This will eliminate th[...]

.6. GB Turning on the Appliance Starting a wash cycle      After having completed all of the installation steps in the preced- ing paragraphs, turn on the water all the way and press the ON- OFF button (A) located on the control panel. The "B" indicator light will come on. At this point, the appliance is on but you must wai[...]

.7. GB - It is important to try and run the dishwasher when it is fully loaded to save on energy. In order to prevent odours from forming and food from caking onto the dishes,you can run the hold cycle. - Choose the right wash cycle: the choice of cycle depends on the type of dishware, cookware and utensils being washed and how dirty they are. Ener[...]

Wash Cycle Table Cycle Cycle Selection Information Description of Cycle Detergent Rinse Aid Normal wash (IEC-EN50242) Intensive wash Rapid Wash Soak Normal dirty dishes, pots and pans without dried on residue. Very dirty dishes, pots and pans. (not to be used with delicate items) Economic, fast cycle to be used on not very dirty dishes right after [...]

.9. GB Cleaning and Special Maintenance Filter Assembly For best performance and results, the filter assembly must be cleaned. The filter efficiently removes food particles from the wash water, allowing it to be recirculated during the cycle. For this reason, it is a good idea to remove the larger food particles trapped in the filter after each was[...]

.10. GB Installation Positioning the Appliance Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned on the right or the left to facilitate proper installation. Levelling [...]

Installation Diagram The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Inst ead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negativ[...]