Hunter Caribbean Breeze инструкция обслуживания

T ype T ,G,B Models T ype T ,G,B Models T ype T ,G,B Models Form# 41847-01 20100528 ©2010 Hunter Fan Co. For Y our Records and W arranty Assistance For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. _____________[...]

2 41847-01 • 05/28/10 • Hunte r Fan Company T ab le Of Contents Preparing the F an Site . . . . . . . . . . . . . . . . . 3 1 • Getting Ready . . . . . . . . . . . . . . . . . . . . . . 6 2 • Installing the Ceiling P late . . . . . . . . . . 7 3 • Ass embling and Hanging the Fan . . . 8 4 • Wiring the Fan . . . . . . . . . . . . . . . .[...]

3 41847-01 • 05/28/10 • Hunte r Fan Company 7’ Minimum Blades to Floor 8’ Minimum Ceiling Height 30” From W all or Nearest Obstruction St ep 1 - Ch oo se th e F an Sit e Proper ceiling fan loc ation and at tachment to the building struct ure ar e ess ent ial for safety, r eliable operation, maximum efficiency, and e nergy savings . Choos [...]

4 41847-01 • 05/28/10 • Hunte r Fan Company P r e p a r i n g t h e Fa n S i t e ( c o n t i n u e d ) CAUT ION: All wiring must b e in accordance wi th national and local electrical cod es and ANSI/NFP A 70. If you are unfamiliar with wiring, use a qualified electrician. Steps 2 – 3 Step 4 Step 5 St ep 2 - Cut th e Ce ilin g Hole 2-1. Locat[...]

5 41847-01 • 05/28/10 • Hunte r Fan Company I n s t a l l e r ’ s C h o i c e a n d O p t i o n a l A c c e s s o r i e s Understan ding Mountin g and Instal ler’ s C hoic e ® Hunte r ’ s pate nted 3-position mounting syst em provides you maximum installation flexibility and ease . Y ou can install your Hunter fan in one of three wa ys [...]

6 41847-01 • 05/28/10 • Hunte r Fan Company T o install a ceiling fan, be sure you can do the following: • Lo cate the ce iling joist or other suitable suppor t in ceiling . • Drill hol es for and install woo d screws. • Identif y and connec t electrical wires. • Lift 40 p ounds. If you need help installing the fan, your Hunter fan deal[...]

7 41847-01 • 05/28/10 • Hunte r Fan Company CAU TION: T o a void pos sible electrical sho ck, b efore installing your fan, disconnect the p ower by t urning off the circuit br eakers t o the outlet box and asso ciated wall switc h loc ation. If you cannot lock the circuit br eakers in the off position, securely fasten a promine nt warning dev[...]

8 41847-01 • 05/28/10 • Hunte r Fan Company Steps 3-5 – 3-6 Low Profile Screw Low Profile W a sher Steps 3-2 – 3-3 Downrod Canopy Canopy T rim Ring Sets crew W ARNIN G: Fan ma y fall if not ass embled a s directed in these installation ins tructions. 3-1. Unbundle the wires from t he fan. For Standard or Angle d mounting: 3-2. T o ass emb[...]

9 41847-01 • 05/28/10 • Hunte r Fan Company All wiring must b e in accorda nce with national and lo cal ele c trical code s and ANSI/NFP A 70. If you are unfam iliar with wiring , use a qualifie d elec trician. W all switches are not included. Selec t an acceptable general-use switch in accordanc e with nat ional and lo cal electrical co des .[...]

10 41847-01 • 05/28/10 • Hunte r Fan Company 5-1. Holding the c anopy , rais e the fan off the hook . 5-2. Align the slots in the canopy with the tabs on the ceiling plat e. 5-3. Rais e the canopy over the ceiling plat e. Rotate the canopy clockwise until the tabs on the ceiling plate t otally engage with the slots in the canopy . 5-4. Partial[...]

11 41847-01 • 05/28/10 • Hunte r Fan Company Step 6-1 (Deta il) Grommet Blade Ass embly Screws Use with grommet Use without grommet Hunte r fans us e several styl es of fan blad e irons (brack ets that hold the blade to the fan). 6-1. Y our f an may inc lude blad e grommets. If your f an has grommets, insert them by hand int o the holes on the [...]

12 41847-01 • 05/28/10 • Hunte r Fan Company Y our Hunter fan comes with an int egrated light fixt ure assembly and an optional swit ch housing cap and plug b utton. i s feat ure gives you the option of installing the fan with OR without t he included light fixtur e . e steps below direct you whether or not you ar e installing a light ?[...]

13 41847-01 • 05/28/10 • Hunte r Fan Company Lower Swit ch Housing Plug Connector Housing Ass embly Screw Plug Connector Detail Steps 7-6 – 7-7 7-6. T o attach the lower swit ch housing , connect the upp er plug connector from the motor to t he lower plug connec tor in the lower switc h housing as sembly . Note: Both plug conne ctors are po l[...]

14 41847-01 • 05/28/10 • Hunte r Fan Company Installing the Lig ht Fixture 7-9. Remove the swit ch housing cap and plug button from the lower switc h housing . 7-10. Push the wir es from the light kit t hrough the hole in the cent er of the lower swit ch housing . 7-11. Screw the threaded rod of the light fixt ure into the lower switc h housin[...]

15 41847-01 • 05/28/10 • Hunte r Fan Company 7 • C o m p l e t i n g Yo u r I n s t a l l a t i o n W i t h o r W i t h o u t a B o w l L i g h t F i x t u r e ( C o n t i n u e d ) Installing the Gl ass Bowl 7-16. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets. 7-17. Attach the extra pull chain (included) to the fan pu[...]

16 41847-01 • 05/28/10 • Hunte r Fan Company In warm weather , us e downward air flow patt ern In cold weather , us e upward air flow pattern 8-1. T urn on elec trical power to the fan. 8-2. e fan pull chain contr ols power to the fan. e pull chain has four settings in se quence: High, Medium, Low , and Off. • Pull the c hain slowly [...]

17 41847-01 • 05/28/10 • Hunte r Fan Company Problem: No thing happens; f an do es no t move. 1. T urn p ower on, re place fus e, or reset breaker . 2. Loos en canopy , check all connections according t o the wiring the fan sec tion. 3. Check the plug connection in the switch housing. 4. Push motor r eversing switc h firmly left or right to en[...]