Intel S875WP1-E инструкция обслуживания

Intel ® Server Board S875WP1-E Product Guide A Guide for Technically Qualified Assemblers of Intel ® Identified Subassemblies/Products Order Number: C32693-002[...]

ii Important Safety Instructions Read all caution and safety statements in this docum ent before perform ing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http:support.intel.com . Disclaimer Intel Corporation (Intel) makes no warranty of any kind with r egard to this mater[...]

iii Contents 1 Server Board Features ................................................................................... 9 Server Board Connector and Component Locations ............................................................ 11 Back Panel Connectors ..............................................................................................[...]

iv Intel Server Board S875WP1-E Product Guide BIOS .......................................................................................................................... ........... 33 PCI Auto Configuration................................................................................................. 33 IDE Auto Configuration................[...]

Contents v 3 Configuration Softw are and Ut ilities ......................................................... 63 Updating the BIOS with the Intel ® Flash Memory Update Utility .......................................... 63 Obtaining the BIOS Update File ................................................................................... 63 Recording[...]

vi Intel Server Board S875WP1-E Product Guide Server Board Resources ..................................................................................................... 104 Memory Map .............................................................................................................. 104 DMA Channels ....................................[...]

Contents vii Figures Figure 1. Server Board Components .......................................................................................... 11 Figure 2. Back Panel Connectors ............................................................................................... 1 2 Figure 3. Front Panel Connectors ....................................[...]

viii Intel Server Board S875WP1-E Product Guide Table 21. Boot Configuration Submenu ........................................................................ 73 Table 22. Peripheral Configuration Submenu ............................................................... 74 Table 23. Drive Configuration Submenu .........................................[...]

9 1 Server Board Features This chapter briefly describes the main features of Intel ® Server Board S875WP1-E. This server board is available in two options: • The server board S875WP1 includes dual-channe l Serial ATA support with two Serial ATA connectors. Support for RAID 0 and 1 support is planned. • The server board S875WP1LX includes an a[...]

10 Intel Server Board S875WP1-E Product Guide Table 1. Server Board Features (continued) BIOS Intel/AMI BIOS with support for: • Advanced Configuration and Power Interface (ACPI) • 8 megabit symmetrical flash memory • Support for SMBIOS • Intel ® Rapid BIOS Boot • Intel ® Express BIOS Update Power Management Support for ACPI: • Suspen[...]

Server Board Features 11 Server Board Connector and Component Locations TP00182 A BC D E F G I J K L M N O P Q R T U V W Y Z AA BB CC X S H A. System Fan 4 Header B. +12V CPU Power Connector C. Processor Socket D. CPU Fan E. DIMM Sockets F. Main Power Connector G. Floppy Drive Connector H. Auxiliary Power Connector I. Primary IDE Connector J. Secon[...]

12 Back Panel Connectors The back panel connectors are color-coded in compliance with PC 99 recommendations. TP00183 A B C DE FG HI A. PS/2 mouse B. PS/2 keyboard C. Parallel port D. Serial port A E. Video port F. NIC 1 (1 Gb) G. NIC 2 (10/100 Mb) H. USB ports 1 and 2 I. USB ports 3 and 4 Figure 2. Back Panel Connectors Front Panel Connectors Figur[...]

Server Board Features 13 Processor The S875WP1-E server board supports a single Intel Pentium 4 processor with an mPGA478 socket. The processor connect s to the server board through the mPGA478 socket. The Intel Pentium 4 processor can be removed and re placed to accommodate a supported higher speed processor. The server board S875WP1-E supports th[...]

14 Intel Server Board S875WP1-E Product Guide • Support for 128 Mb, 256 Mb, and 512 Mb memory technologies for the following memory configurations:  Up to 1.0 GB utilizing 128 Mb technology  Up to 2.0 GB utilizing 256 Mb technology  Up to 4.0 GB utilizing 512 Mb technology Only DIMMs tested and qualified by Intel or a de signated memory [...]

Server Board Features 15 Intel 82801EB I/O Controller Hub (ICH5-R) The Intel 82801EB ICH5-R has these features: • Upstream Hub Interface to the MCH • Integrated IDE controller (supports two Ultra ATA-100/66 mode, Ultra DMA 33 mode, and PIO mode). • Integrated SATA controller supports two SATA devices with transfer speeds up to 150 MB/s and in[...]

16 Intel Server Board S875WP1-E Product Guide AGP Connector AGP is a high-performance interface for graphics-int ensive applications. AGP is independent of the PCI bus and is intended for exclusive use with graphical display devices. The AGP bus follows the AGP 3.0 specification. The AGP connector on the server board S875WP1-E supports the followin[...]

Server Board Features 17 Table 3. Video Modes (continued) 1600x1200 60, 66 Supported Suppor ted Supported Supported 1600x1200 76, 85 Supported Supported Supported – 3D Mode Refresh Rate (Hz) S875WP1-E 3D Video Mode S upport with Z Buffer Enabled 640x480 60,72,75,90,100 S upported Supported S upported Supported 800x600 60,70,75,90,100 S upported S[...]

18 Intel Server Board S875WP1-E Product Guide Serial Port The server board S875WP1-E has one serial port c onnector and one serial port header. The serial port A connector is located on the back panel. The serial ports’ NS16C550-compatible UART supports data transfers at speeds up to 115.2 kb/s with BIOS support. A DH10 10-pin serial header is av[...]

Server Board Features 19 USB High-Speed USB 2.0 Support ✏ NOTES Use a shielded cable that meets th e requirements for a full-speed USB device. Computer systems that have an unshielded cable attached to a USB port might not meet FCC Class B requirements, even if no device or a low- speed USB device is attached to the cable. USB devices are limited[...]

20 Intel Server Board S875WP1-E Product Guide Legacy USB support operates as follows: 1. When the user applies power to th e computer, legacy support is disabled. 2. POST begins. 3. Legacy USB support is enabled by the BIOS a llowing the user to use a USB keyboard to enter and configure the BIOS Setup pr ogram and the maintenance menu. 4. POST comp[...]

Server Board Features 21 Device IDs (IDSEL) Each device under the PCI hub bridge has its ID SEL signal connected to one bit of AD[31:16], which acts as a chip select on the PCI bus segmen t in configuration cycles. This determines a unique PCI device ID value for use in configur ation cycles. The following table shows each IDSEL value for the PCI b[...]

22 Intel Server Board S875WP1-E Product Guide IDE Interfaces The ICH5-R IDE controller has two independent bus-mastering IDE interfaces that can be independently enabled. The interface handles the exchange of information between the processor and peripheral devices like hard disks and CD -ROM drives. The IDE interfaces supports: • Up to four IDE [...]

Server Board Features 23 Network Interface Controller (NIC) The server board S875WP1-E supports two Network Interface Controllers (NICs), one that runs at 10/100Mb and is based on the Intel 82562ET NIC and th e other that runs at one gigabit and is based on the Intel 82547EI NIC. When looking at the r ear of the chassis, the gigabit NIC is at the l[...]

24 Intel Server Board S875WP1-E Product Guide Table 7 describes the LED states when th e board is powered up and the 82547EI 10/100/1000 Gigabit Ethernet LAN subsystem is operating. Table 7. 10/100/1000 Gigabit Ethe rnet LAN Connector LEDs LED Color LED State Indicates Off LAN link is not established. On (steady state) LAN link is established. Gree[...]

Server Board Features 25 ACPI features include: • Plug and Play (including bus and device enumeration) • Power management control of individual devi ces, add-in boards (some add-in boards may require an ACPI-aware driver), vide o displays, and hard disk drives • Methods for achieving less than 15-watt sy stem operation in the power-on/standby[...]

26 Intel Server Board S875WP1-E Product Guide Wake-up Devices and Events CAUTION For LAN wake capabilities, the 5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when im plementing LAN wake capabilities can damage the power supply. Table 9 provides an overvi[...]

Server Board Features 27 Resume on Ring Resume on Ring enables telephony devices to access th e computer when it is in a power-managed state. The operation of Resume on Ring wakes the system from the S1 or S3 sleep states when a signal is sent to the serial port at the rear or the chassis or to an internally installed modem. Resume on ring can be s[...]

28 Intel Server Board S875WP1-E Product Guide Power Connector When used with an ATX12V or EPS12V compliant power supply that supports remote power on/off, the S875WP1-E server board can turn o ff the system power through software control. When the system BIOS receives the correct co mmand from the operating system, the BIOS turns off power to the c[...]

Server Board Features 29 Instantly Available PC Technology CAUTION For Instantly Available PC technology, the +5 V standby line for the power supply must be capable of providing ad equate +5 V standby current. Failure to provide adequate standby current wh en implementing Instantly Available PC technology can damage the power supply. The S875WP1-E [...]

30 Intel Server Board S875WP1-E Product Guide Hardware Management and Monitoring The Hardware Management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Remote temperature sensing near the Vreg • Power supply monitoring ([...]

Server Board Features 31 Password Security The BIOS includes security features that restri ct whether the BIOS Setup program can be accessed and who can boot the server. A supervisor passwor d and a user password can be set for the Setup menu and for booting the server, with the following restrictions: • The supervisor password gives unrestricted[...]

32 Intel Server Board S875WP1-E Product Guide Real-Time Clock, CMOS SRAM, and Battery The real-time clock provides a time-of-day clock and a multi-century calendar with alarm features. The real-time clock supports 256 bytes of battery -backed CMOS SRAM in two banks that are reserved for BIOS use. A coin-cell battery (CR2032) powers the real-time cl[...]

Server Board Features 33 4. Reattach the AC power cables and power on the server. 5. Power down the server and agai n remove all AC power cables. 6. Replace the jumper at jumper block J8G1 so that it covers pins 1 and 2. 7. Replace the chassis cover and re-attach the AC power cables. 8. Power on the server. 9. Reconfigure settings as necessary. BIO[...]

34 Intel Server Board S875WP1-E Product Guide To use ATA-66/100 features the following items are required: • An ATA-66/100 peripheral device • An ATA-66/100 compatible cable • ATA-66/100 operating system device drivers ✏ NOTE ATA-66/100-compatible cables are backward-c ompatible with drives using slower IDE transfer protocols. If an ATA-66/[...]

Server Board Features 35 Custom Splash Screen During POST, an Intel splash screen is displayed by default. This splash screen can be replaced with a custom splash screen. A utility is available from Intel to assist with creating a custom splash screen. The custom splash screen can be pr ogrammed into the flash memory using the BIOS upgrade utility.[...]

36 Intel Server Board S875WP1-E Product Guide Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • Video adapter • Keyboard • Mouse Fast Booting Systems with Intel ® Rapid BIOS Boot [...]

Server Board Features 37 System Management BIOS (SMBIOS) SMBIOS is a Server Management Interface (DM I) compliant method for managing computers in a managed network. The main component of SMBIOS is the Manageme nt Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system admi[...]

[...]

Server Board Installation and Upgrades 39 2 Server Board Installation and Upgrades Tools and Supplies Needed • Phillips * (cross head) screwdriver (#1 bit and #2 bit) • Jumper removal tool or needle nosed pliers • Pen or pencil • Antistatic wrist strap and c onductive foam pad (recommended) Before You Begin Emissions Disclaimer To ensure EM[...]

40 Intel Server Board S875WP1-E Product Guide CAUTIONS System power on/off: The power button DOES NOT turn off the system AC power. To remove power from system, you must unplug the AC power cord from the wall outlet. Make sure the AC power cord is unplugged before you open the chassis, add, or remove any components. Electrostatic discharge (ESD) &a[...]

Server Board Installation and Upgrades 41 Installing the I/O Shield CAUTION Systems based on the S875WP1-E server board need the I/O shield properly installed to pass emissions (EMI) certif ication testing and to meet Class A emissions compliance levels. Without th e I/O shield, or with an improperly installed I/O shield, the server system will not[...]

42 Intel Server Board S875WP1-E Product Guide Installing Chassis Standoffs If your chassis does not have standoffs placed as shown below, you must rearrange them so they match the holes in the server board. Failure to properly rearrange the metal standoffs may cause the server board to malfunction and ma y permanently damage it. Your chassis may be[...]

Server Board Installation and Upgrades 43 Intel ® Server Chassis SC5250-E The Intel ® Server Chassis SC5250-E comes with standoffs pre-installed in positions K, E, A, N, I, and D. Install standoffs in the bottom of the chassis at positions L, 3, 1, M, H, and C. Standoffs are included with your chassis. TP00188 K E A L H C M 1 3 Figure 8. Installi[...]

44 Intel Server Board S875WP1-E Product Guide Installing the Server Board Placing the Server Board into the Chassis When placing the board into the chassis, insert the rear I/O connector end first, carefully positioning the board’s I/O connectors into the openings in the I/O shield on the back of the chassis. TP00103 Figure 9. Placing the Server [...]

Server Board Installation and Upgrades 45 Using the screws that came with your chassis, m ount the board to the chassis at the 9 locations shown in Figure 10. TP00189 SC5200 SC5250-E Figure 10. Attaching the Server Board Installing the Processor To install a processor, follow these instructions: 1. Observe the safety and ESD precautions at the begi[...]

46 Intel Server Board S875WP1-E Product Guide ✏ NOTE The bottom of the heat sink may have thermal interface material (TIM) already applied. Be careful not to damage the thermal interface material. 5. If there is no thermal interface material on the bo ttom of the heat sink, use the enclosed syringe and apply the thermal interface material to the [...]

Server Board Installation and Upgrades 47 7. Fully open the levers at the top of the heat sink, as shown by letter “A” in the figure below. 8. With the levers in their fully opened position, push down firmly to secure the retention mechanism clips, represented by letter “B” in the figure below. TP00209 A B A Figure 13. Attaching the Fan Hea[...]

48 Intel Server Board S875WP1-E Product Guide 10. Connect the processor fan cable to th e processor fan connector (see Figure 15). TP00201 Figure 15. Connecting the Processor Fan Cable to the Processor Fan Connector Removing the Processor To remove the processor, follow these instructions: 1. Observe the safety and ESD precautions at the beginning [...]

Server Board Installation and Upgrades 49 Installing and Removing Memory The S875WP1-E server board contains four 184- pin DIMM sockets and supports up to four DDR SDRAM DIMMs. The minimum supported memory configuration is 128 MB , using one DIMM in DIMM socket 1A. The maximum configurable memory size is a 4 GB, using four 1 GB stacked unbuffered D[...]

50 Intel Server Board S875WP1-E Product Guide Installing DIMMs To install DIMMs, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Turn off all peripheral devices connected to th e server. Turn off the server and disconnect the AC power cord. 3. Remove the server’s cover and locate the DIMM sockets[...]

Server Board Installation and Upgrades 51 Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Remove the AC power cord from the server. 4. Remove the server’s cover. 5. Gently spread the [...]

52 Intel Server Board S875WP1-E Product Guide Installing an AGP Card Follow these instructions to install an AGP card: 1. Observe the precautions in "Before You Begin" on page 39. 2. Place the card in the AGP connector. 3. Press down on the card until it is fully seated in the AGP connector. A retention notch on the card will snap into pl[...]

Server Board Installation and Upgrades 53 Connecting the IDE Cable The Intel ® boxed server board package includes a 40-contact, 80-conductor IDE cable. This cable is capable of connecting two drives to the serv er board. The cable supports Ultra ATA/100/66 and Ultra ATA/100 transfer protocols and is backwa rd-compatible with drives using slower I[...]

54 Intel Server Board S875WP1-E Product Guide Connecting the Serial ATA Cable (Optional) The Intel server board S875WD1 includes two Se rial ATA (SATA) cables and the server board S875WD1LX includes three SATA cables. Th ese 4-conductor cables support the Serial ATA protocol. Each cable connects a single drive to the server board. For correct cable[...]

Server Board Installation and Upgrades 55 Connecting Internal Headers Before connecting internal headers, observe the precautions in “Before You Begin” on page 39. TP00194 1 2 33 34 19 21 0 A B A Front Panel USB 2.0 Header B Front Panel Header Figure 20. Location of Internal Headers Connecting the Front Panel Header Before connecting the front [...]

56 Intel Server Board S875WP1-E Product Guide Table 12. Front Panel Header (J7J1) (continued) 19 ACPI Sleep Switch 20 Chassis Intrusion 21 GND (ACPI Sleep Switch 22 NIC#2 Activity LED Anode 23 Unused 24 NIC#2 Activity LED Cathode 25 Key 26 Key 27 Unused 28 Unused 29 Unused 30 Unused 31 Unused 32 Unused 33 Unused 34 Unused Connecting the USB 2.0 Hea[...]

Server Board Installation and Upgrades 57 Connecting Hardware Control and Power Cables Figure 21 shows the location of the hardware cont rol (fans and chassis intrusion) headers and power supply connectors. TP00195 A B C E H I 12 V F J1B1 J6J3 J6J2 J7B1 J1F1 J9A1 G D A. System Fan 4 Header B. CPU Fan C. Main Power Connector D. Auxiliary Power Conne[...]

58 Intel Server Board S875WP1-E Product Guide Connecting Fans Connect the processor’s fan heatsink cable to the processor fan header on the board. Connect the chassis fan cables to the board fan header s. See Figure 21 for fan header locations. Chassis Intrusion Connect the chassis intrusion cable from the chassis to the 1 x 2 header on the board[...]

Server Board Installation and Upgrades 59 This three-pin jumper block, shown in Figure 22, enables all server boa rd configurations to be done in BIOS Setup. Table 14 shows the jumper settings for the Setup program modes. Table 14. Jumper Settings for the BIOS Setup Program Modes (J8J2) Jumper Setting Mode Description 1 3 Normal (default) (1-2) The[...]

60 Intel Server Board S875WP1-E Product Guide Replacing the Battery When your server is turned off, a lithium battery maintains the time-of-day clock and the keeps the values in CMOS RAM. The location of the server board battery is shown in Figure 23 on page 62. The battery should last about seven years whereupon it begins to lose voltage. When the[...]

Server Board Installation and Upgrades 61 VARO Räjähdysvaara, jos pariston tyyppi on väär ä. Paristot on kierrätettävä, jos se on mahdollista. Käytetyt paristot on hävitettävä paikallisten ympäristömääräysten mukaisesti. (Finnish) VORSICHT Bei falschem Einsetzen einer neuen Ba tterie besteht Explosionsgefahr. Die Batterie darf nur [...]

62 Intel Server Board S875WP1-E Product Guide To replace the battery, follow these steps: 1. Observe the safety and ESD precautions at the beginning of this chapter. 2. Turn off all peripheral devices connected to the server. Disconnect the server’s power cord from the AC power source (wall outlet or power adapter). 3. Remove the server cover. 4.[...]

Configuration Software and Utilities 63 3 Configuration Software and Utilities This chapter tells you how to update the BIOS by with the Intel Flash Memory Update Utility, and how to recover the BIOS if an update fails. Updating the BIOS with the Intel ® Flash Memory Update Utility With the Intel Flash Memory Update Utility you can update the syst[...]

64 Intel Server Board S875WP1-E Product Guide Recording the Current BIOS Settings 1. Boot the server and press <F2> when you see the message: Press <F2> Key if you want to run SETUP ✏ NOTE Do not skip step 2. You will need these settings to configure your server at the end of the upgrade procedure. 2. Write down the current settings i[...]

Configuration Software and Utilities 65 Creating a BIOS Update Media 1. Obtain the BIOS update file through your se rver supplier or from the Intel World Wide Web site: http://support.intel.com/support/motherboards/server/ 2. Copy the BIOS update file to a te mporary directory on your hard disk. 3. From the C: prompt, change to the temporary direc[...]

66 Intel Server Board S875WP1-E Product Guide Updating the BIOS CAUTION The AUTOEXEC.BAT file provided with the update files updates the BIOS in two parts: first updating th e boot block and displaying the Operation completed successfully message and second, updating the BIOS core. You will be asked to reboot the system when the update process is c[...]

Configuration Software and Utilities 67 Recovering the BIOS It is unlikely that anything will interrupt the BI OS update, however, if an interruption occurs, the BIOS could be damaged. The following steps explai n how to recover the BIOS if an update fails. The following procedure uses recovery mode for the Setup program. See page 58 for more infor[...]

68 Intel Server Board S875WP1-E Product Guide Using the Setup Program You can use the BIOS Setup program to change the configuration information and boot sequence for the server. This chapter tells you how to access the BIOS Setup program and lists Setup features, options, and default settings. ✏ NOTE For reference purposes, you should write down[...]

Configuration Software and Utilities 69 Table 16 shows the function keys available for menu screens. Table 16. BIOS Setup Program Function Keys BIOS Setup Program Function Key Description < ← > or < → > Selects a different menu screen. < ↑ > or < ↓ > Moves cursor up or down. <Tab> Moves cursor to the next field[...]

70 Intel Server Board S875WP1-E Product Guide Main Menu To access this menu, select Main on the menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit Table 18 describes the Main Menu. This menu reports processor and memory information and is for configuring the system date and system time. Table 18. Main Menu Feature[...]

Configuration Software and Utilities 71 Advanced Menu To access this menu, select Advanced on the menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration USB Configuration C[...]

72 Intel Server Board S875WP1-E Product Guide PCI Configuration Submenu To access this submenu, select Advanced on the menu bar, then PCI Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration[...]

Configuration Software and Utilities 73 Boot Configuration Submenu To access this submenu, select Advanced on the menu bar, then Boot Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration USB[...]

74 Intel Server Board S875WP1-E Product Guide Peripheral Configuration Submenu To access this submenu, select Advanced on th e menu bar, then Peripheral Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Vide[...]

Configuration Software and Utilities 75 Table 22. Peripheral Configuration Submenu (continued) Feature Options Description Parallel Port • Disabled • Enabled • Auto (default) Configures the parallel port. Auto assigns LPT1 the address 378h and the interrupt IRQ7. An * (asterisk) displayed next to an address indicates a conflict with another d[...]

76 Intel Server Board S875WP1-E Product Guide Drive Configuration Submenu To access this submenu, select Advanced on the menu bar, then Drive Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configura[...]

Configuration Software and Utilities 77 Table 23. Drive Configuration Submenu (continued) Hard Disk Pre-Delay • Disabled (default) • 3 Seconds • 6 Seconds • 9 Seconds • 12 Seconds • 15 Seconds • 21 Seconds • 30 Seconds Specifies the hard disk drive pre-delay. Intel (R) RAID Technology • Disabled (default) • Enabled SATA Port -0 [...]

78 Intel Server Board S875WP1-E Product Guide Primary/Secondary/SATA-0/SATA-1 Master/Slave Submenus To access these submenus, select Advanced on the menu bar, then Drive Configuration, and then the master or slave to be configured. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive[...]

Configuration Software and Utilities 79 Table 24. Primary/Secondary/SATA- 0/SATA-1 Master/Slave Submenus (continued) Feature Options Description S.M.A.R.T • Auto (default) • Disabled • Enabled This option can be changed only if User is selected as the type. If Auto is selected, this option is not displayed. Enables or disables Self-monitoring[...]

80 Intel Server Board S875WP1-E Product Guide Event Log Configuration Submenu To access this menu, select Advanced on the menu bar, then Event Log Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Conf[...]

Configuration Software and Utilities 81 Video Configuration Submenu To access this menu, select Advanced on th e menu bar, then Video Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration USB[...]

82 Intel Server Board S875WP1-E Product Guide USB Configuration Submenu To access this menu, select Advanced on the menu bar, then USB Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration US[...]

Configuration Software and Utilities 83 Chipset Configuration Submenu To access this menu, select Advanced on th e menu bar, then Chipset Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configuration[...]

84 Intel Server Board S875WP1-E Product Guide Table 29. Chipset Configuration Submenu (continued) Extended Configuration • Default (default) • User Defined SDRAM Frequency • Auto (default) • 266 • 333 • 400 This option is available only if User Defined is selected as the Extended C onfiguration option. It allows the user to ove rride th[...]

Configuration Software and Utilities 85 Fan Control Configuration Submenu To access this menu, select Advanced on the menu bar, then Fan Control Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Config[...]

86 Intel Server Board S875WP1-E Product Guide Hardware Monitoring Submenu To access this menu, select Advanced on th e menu bar, then Hardware Monitoring. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video Configurati[...]

Configuration Software and Utilities 87 Remote Access Configuration Submenu To access this menu, select Advanced on the me nu bar, then Remote Access Configuration. Maintenance Main Advanced Security Power Boot Exit PCI Configuration Boot Configuration Peripheral Configuration Drive Configuration Floppy Configuration Event Log Configuration Video C[...]

88 Intel Server Board S875WP1-E Product Guide Security Menu To access this menu, select Security from the menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit The menu represented by Table 33 is for setting passwords and security features. Table 33. Security Menu If no password entered previously: Feature Options De[...]

Configuration Software and Utilities 89 Power Menu To access this menu, select Power from th e menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit ACPI The menu represented in Table 34 is for setting the power management features. Table 34. Power Menu Feature Options Description ACPI No Options When selected, displ[...]

90 Intel Server Board S875WP1-E Product Guide Boot Menu To access this menu, select Boot from the menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit The menu represented in Table 36 is used to set the boot features and the boot sequence. Table 36. Boot Menu Feature Options Description Silent Boot • Disabled (def[...]

Configuration Software and Utilities 91 Boot Device Priority Submenu To access this menu, select Boot on the menu bar, then Boot Devices Priority. Maintenance Main Advanced Security Power Boot Exit Boot Device Priority Hard Disk Drives Removable Devices ATAPI CDROM Drives The submenu represented in Table 37 is for setting boot devices priority. Tab[...]

92 Intel Server Board S875WP1-E Product Guide Removable Devices Submenu To access this menu, select Boot on th e menu bar, then Removable Devices. Maintenance Main Advanced Security Power Boot Exit Boot Device Priority Hard Disk Drives Removable Devices ATAPI CDROM Drives The submenu represented in Table 39 is for setting removable device priority.[...]

Configuration Software and Utilities 93 Exit Menu To access this menu, select Exit from th e menu bar at the top of the screen. Maintenance Main Advanced Security Power Boot Exit The menu represented in Table 41 is for exiting the BIOS Setup program, saving changes, and loading and saving defaults. Table 41. Exit Menu Feature Description Exit Savin[...]

[...]

Solving BIOS Problems 95 4 Solving BIOS Pr ob lems The board reports POST errors in two ways: • By sounding a beep code • By displaying an error message on the monitor BIOS Beep Codes The BIOS beep codes are listed in Table 42. The BIOS also issues a beep code (one long tone followed by two short tones) during POST if the video configuration fa[...]

96 Intel Server Board S875WP1-E Product Guide BIOS Error Messages When a recoverable error occurs during the POST, the BIOS displays an error message describing the problem (see Table 43). Table 43. BIOS Error Messages Error Message Explanation GA20 Error An error occurred with Gate A20 when switching to protected mode during the memory test. Pri M[...]

Solving BIOS Problems 97 Table 43. BIOS Error Messages (continued) Error Message Explanation Memory Size Decreased Memory size has dec reased since the last boot. If no memory was removed, then memory may be bad. Memory Size Increased Memory size has in creased since the last boot. If no memory was added, there may be a pr oblem with the system. Me[...]

[...]

Getting Help 99 5 Getting Help World Wide Web http://support.intel.com/support/motherboards/server/S875WP1-E Telephone All calls are billed US $25.00 per incident, levied in local currency at the applicable credit card e x c h a n g e r a t e p l u s a p p l i c a b l e t a x e s . (Intel reserves the right to change the pricing for telephone suppo[...]

[...]

Technical Reference 101 6 Technical Reference Server Board Connectors CAUTION Many of the baseboard and front pane l connectors provide operating voltage (+5 V DC and +12 V DC, for example) to devices inside the server chassis, such as fans and internal peripherals . These connectors are not overcurrent protected. Do not use these connectors for po[...]

102 Intel Server Board S875WP1-E Product Guide Baseboard Connectors Power, Fan, Chassis Intrusion Connectors Figure 24 shows the power, fan, and chassis intrusion connectors. TP00195 A B C E H I 12 V F J1B1 J6J3 J6J2 J7B1 J1F1 J9A1 G D A. Chassis fan B. Processor fan C. Main power D. Auxiliary power E. Chassis fan F. Chassis fan G. Chassis intrusio[...]

Technical Reference 103 Add-In Board and Peripheral Interface Connectors Figure 25 shows the add-in board a nd peripheral interface connectors. TP00199 B A C L K J D EF G H I Serial A T A A T A 1 0 0 A. PCI slot 1 B. PCI slot 2 C. PCI slot 3 D. Serial ATA Drive SATA-A4 (S875WP1LX only) E. Serial ATA Drive SATA-A2 (S875WP1LX only) F. Serial ATA Driv[...]

104 Intel Server Board S875WP1-E Product Guide Server Board Resources Memory Map Table 44. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 4194304 K 100000 - FFFFFFFF 4095 MB Ex tended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF[...]

Technical Reference 105 I/O Map Table 46. I/O Map Address (hex) Size Description 0000 - 00FF 256 bytes Used by the Server Boar d S875WP1-E. Refer to the ICH5-R data sheet for dynamic addressing information. 0170 - 0177 8 bytes Secondary IDE channel 01F0 - 01F7 8 bytes Primary IDE channel 0228 - 022F (Note 1) 8 bytes LPT3 0278 - 027F (Note 1) 8 byte[...]

106 Intel Server Board S875WP1-E Product Guide Interrupts The interrupts can be routed through the Advan ced Programmable Interrupt Controller (APIC) portion of the ICH5-R component. The APIC is supported in Windows * 2000 Server and Windows XP and supports a total of twenty-four interrupts. Table 47. Interrupts IRQ System Resource NMI I/O channel [...]

Regulatory and Integration Information 107 7 Regulatory and Integration Information Product Regulatory Compliance Product Safety Compliance The server board S875WP1-E complies with the following safety requirements: • UL 1950 - CSA 950 (US/Canada) • EN 60 950 (European Union) • IEC60 950 (International) • CE – Low Voltage Directive (73/23[...]

108 Intel Server Board S875WP1-E Product Guide Product Regulatory Compliance Markings This product is marked with the fo llowing Product Certification Markings: Table 48. Product Certification Markings UL Recognition Mark CE Mark Russian GOST Mark Australian C-Tick Mark BSMI DOC Marking BSMI EMC Warning RRL MIC Mark[...]

Regulatory and Integration Information 109 Electromagnetic Compatibility Notices FCC (USA) This device complies with Part 15 of the FCC Ru les. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfere nce that may cause un[...]

110 Intel Server Board S875WP1-E Product Guide Industry Canada (ICES-003) This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the interference-causing equi pment standard entitled: “Digital Apparatus,” ICES-003 of the Canadian Department of Communications. Cet appareil numérique[...]

Regulatory and Integration Information 111 Installation Precautions When you install and test the server board, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: • Sharp pins on connectors • Sharp pins on printed circuit assemblies • Rough edges and sharp corners on the chassis • Hot compone[...]

112 Intel Server Board S875WP1-E Product Guide Place Battery Marking There is insufficient space on this server board to provide instructions fo r replacing and disposing of the battery. For system safety certification, the following statement or equivalent statement may be required to be placed permanently and legibly on the chassis near the batte[...]