Nissan 2011 Versa инструкция обслуживания

® 2011 VE R S A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2011 N IS SAN VE R SA C11-D Printing : May 2010 Publication No.: OM1E 0C11U0 Printed in U .S.A. C11-D ' 11[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

This manual includes information for all options available on this model. Therefore, you may find some information that does not apply to your vehicle. All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and with- ou[...]

BLUETOOTH 威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Xanavi Informatics Corporation. XM Radio 威 requires subscription, sold separately after first 90 days. Not available in Alaska, Hawaii or Guam. For more information, visit www.xmradio.com. © Nissan Mexicana, S. A . de C. V . All rights reserved. No part of this Own[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air conditioner, audio and phone systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consume[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 6 Instrument panel ...................................0 - 7 Engine compartment check [...]

1. Supplemental front-impact air bag modules (P . 1-41) 2. Roof-mounted curtain side-impact supplemental air bag (P . 1-41) 3. Front seat-mounted side-impact supplemental air bag (P . 1-41) 4. Front seat belts (P . 1-12) 5. Head Restraints (P . 1-6) 6. Rear seat belts (P . 1-12) 7. LA T CH (Lower Anchors and T ethers for CHildren) system (P . 1-24)[...]

1. Engine hood (P . 3-23) 2. Windshield wiper and washer switch (P . 2-19) 3. Windshield (P . 8-21) 4. Moonroof (if so equipped) (P . 2-34) 5. P ower windows (if so equipped) (P . 2-31) 6. Door locks, keyfob (if so equipped) , NISSAN Intelligent K ey ™ (if so equipped) , keys (P . 3-4, 3-7, 3-2, 3-2) 7. Mirrors (P . 3-31) 8. Tire pressure (P . 8-[...]

Hatchback 1. Rear hatch opener switch/NISSAN Intelligent K ey™ (if so equipped) (P . 3-24, 3-13) 2. Rear window defroster switch (P . 2-21) 3. Antenna (P . 4-54) 4. Child safety rear door locks (P . 3-7) 5. Fuel-filler door (P . 3-27) 6. Fuel-filler cap, fuel recommendation (P . 3-28, 9-4) 7. Replacing bulbs (P . 8-29) 8. Interior hatch release ([...]

Sedan 1. Interior trunk lid release (P . 3-27 ) 2. Rear window defroster switch (P . 2-21) 3. Antenna (P . 4-54) 4. Child safety rear door locks (P . 3-7) 5. Fuel-filler door (P . 3-27) 6. Fuel-filler cap, fuel recommendation (P . 3-28, 9-4) 7. Replacing bulbs (P . 8-29) 8. T runk opener switch/NISSAN Intelligent K ey ™ (if so equipped) (P . 3-25[...]

1. Cargo cover (if so equipped) (hatchback model only) (P . 2-30) 2. Rear seat (P . 1-4) 3. Interior lights (P . 2-36) 4. Front seat (P . 1-2) 5. Sun visors (P . 3-30) 6. Moonroof switch (if so equipped) (P . 2-34) 7. Map lights (if so equipped) (P . 2-37) 8. Sunglasses holder (if so equipped) (P . 2-27) 9. Glove box (P . 2-29) 10. Parking brake, p[...]

1. Outside mirror control switch (if so equipped) (P . 3-32) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-21) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-53, 4-56) 4. Driver’s supplemental air bag/horn (P . 1-41, 2-24) 5. Meters and gauges (P . 2-4) 6. Cruise co[...]

27. V ehicle Dynamic Control (VDC) off switch (if so equipped) (P . 2-25) *:Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. 0-8 Illustrated table of contents[...]

HR16DE 1. Engine oil filler cap (P . 8-9) 2. Brake and clutch (*1) fluid reservoir (P . 8-15) 3. Air cleaner (P . 8-20) 4. Battery (P . 8-16) 5. Fuse/fusible link box (P . 8-23) 6. Automatic transmission fluid (A TF) dipstick (*2) (P . 8-13) 7. Radiator cap (P . 8-8) 8. Engine coolant reservoir (P . 8-8) 9. Engine oil dipstick (P . 8-9) 10. Drive b[...]

MR18DE 1. Engine oil filler cap (P . 8-9) 2. Brake and clutch (*1) fluid reservoir (P . 8-15) 3. Air cleaner (P . 8-20) 4. Battery (P . 8-16) 5. Fuse/fusible link box (P . 8-23) 6. Automatic/Continuously variable trans- mission fluid (A TF) dipstick (*2) (P . 8-13) 7. Radiator cap (P . 8-8) 8. Engine oil dipstick (P . 8-9) 9. Engine coolant reservo[...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light (if so equipped) 2-8 ™ or Brake warning light 2-8 Charge warning light 2-9 Door open warning light 2-9 Electric power steering warning light 2-9 Engine oil pressure warning light 2-9 W arning light Name Page High temperature warning light (red) 2-10 Low fuel warning light [...]

Indicator light Name Page Cruise main switch indicator light (if so equipped) 2-13 Cruise set switch indicator light (if so equipped) 2-13 Front passenger air bag status light 2-13 High beam indicator light (blue) 2-13 Low temperature indicator light (blue) 2-13 Malfunction Indica- tor Light (MIL) 2-14 Overdrive OFF indi- cator light (A/T / CVT mod[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats ............................................1 - 2 Front manual seat adjustment ....................1 - 2 Folding rear seat (if so equipped) .................1 - 4 Head restraints (Hatchback model and front seats of Sedan model) ..........................1 - 6 Adjustable headrest ([...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

Forward and backward Pull the lever up and hold it while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position. Reclining T o recline the seatback, pull the lever up and lean back. T o bring the seatback forward, pull the lever up and lean your body forward. Release the lever to lock the seat[...]

FOLDING REAR SEAT (if so equipped) 䊊 1 Remove the cargo cover (hatchback model only) from the rear seatback. 䊊 2 Pull the knob 䊊 A to fold each seatback down. WARNING ● Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraints could resul[...]

T ype B Pull the knob 䊊 1 to fold each seatback down 䊊 2 . When returning the seatback to the upright posi- tion, make sure the seat belt is routed through the guide 䊊 A . WARNING ● Never allow anyone to ride in the cargo area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper restraint[...]

HEAD RESTRAINTS (Hatchback model and front seats of Sedan model) WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone else uses the seat. Do n[...]

Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. T o lower, push and hold the lock knob and push the head restraint down. WRS0134 LRS0888 LRS0889 Safety—Seats, seat belts and supplemental restraint system 1-7[...]

Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the vehicle. 5. Reinstall and properly adjust the head re- straint before an occ[...]

Adjust the Active Head Restraints properly as described in this section. ADJUSTABLE HEADREST (rear seats for Sedan model) WARNING The adjustable headrests supplement the other vehicle safety systems. They may provide additional protection against in- jury in certain rear end collisions. Adjust the headrests properly, as specified in this section. C[...]

Adjustment Adjust the headrest so the center is level with the center of the seat occupant’s ears. T o raise the headrest, pull it up. T o lower, push and hold the lock knob and push the headrest down. WRS0134 LRS0888 LRS0889 1-10 Safety—Seats, seat belts and supplemental restraint system[...]

Removal Use the following procedure to remove the ad- justable headrests. 1. Pull the headrest up to the highest position. 2. Push and hold the lock knob. 3. Remove the headrest from the seat. 4. Store the headrest properly so it is not loose in the vehicle. 5. Reinstall and properly adjust the headrest before an occupant uses the seating posi- tio[...]

PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up e[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, and allows you some freedom of movement in the seat. ● If the seat belt cannot be pulle[...]

WARNING When fastening the seat belts, be certain that the seatbacks are completely se- cured in the latched position. If they are not completely secured, passengers may be injured in an accident or sudden stop. Unfastening the seat belts 䊊 1 T o unfasten the seat belt, press the button on the buckle. The seat belt automatically re- tracts. Check[...]

Center of the rear seat (if so equipped for sedan models) The rear seat center seat belt has a connector tongue 䊊 1 and a seat belt tongue 䊊 2 . Both the connector tongue and the seat belt tongue must be securely latched for proper seat belt opera- tion. WARNING ● Always fasten the connector tongue and the seat belt in the order shown. ● Al[...]

䊊 1 Hold the connector tongue so that the seat belt does not retract suddenly when the tongue is released from the connector buckle. Release the connector tongue by inserting a suitable tool such as a key into the connector buckle 䊊 A . 䊊 2 Retract the seat belt up to the retractor base. WARNING ● Do not unfasten the rear center seat belt c[...]

Shoulder belt height adjustment (front seats) The shoulder belt anchor height should be ad- justed to the position best for you. See “Precau- tions on seat belt usage” earlier in this section. T o adjust, pull out the adjustment button 䊊 1 and move the shoulder belt anchor to the desired position 䊊 2 , so the belt passes over the center of [...]

Children need adults to help protect them. They need to be properly restrained. In addition to the general information in this manual, child safety information is available from many other sources, including doctors, teachers, government traffic safety offices, and community organizations. Every child is different, so be sure to learn the best way [...]

LARGER CHILDREN Children who are too large for child restraints should be seated and restrained by the seat belts which are provided. The seat belt may not fit properly if the child is less than 4 ft 9 in (142.5 cm) tall and weighs between 40 lbs (18 kg) and 80 lbs (36 kg) . A booster seat should be used to obtain proper seat belt fit. NISSAN recom[...]

WARNING ● Failure to follow the warnings and in- structions for proper use and installa- tion of child restraints could result in serious injury or death of a child or other passengers in a sudden stop or collision: – The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions [...]

This vehicle is equipped with a universal child restraint anchor system, referred to as the LA T CH (Lower Anchors and T ethers for CHildren) sys- tem. Some child restraints include rigid or webbing-mounted attachments that can be con- nected to these anchors. For details, see “LA T CH (Lower Anchors and T ethers for CHildren) sys- tem” later i[...]

LA T CH lower anchor WARNING Failure to follow the warnings and instruc- tions for proper use and installation of child restraints could result in serious in- jury or death of a child or other passen- gers in a sudden stop or collision: – Attach LA T CH system compatible child restraints only at the locations shown in the illustration. – Do not[...]

When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint. T op tether anchor WARNING ● If the cargo cover (if so equipped) con- tacts the top tether strap when it is attached to the top tether anchor, re- move the cargo cover from the vehicle or secure it on the cargo[...]

T op tether anchor point locations Anchor points are located on the back of the rear seats (hatchback model) or on the rear parcel shelf (sedan model) 䊊 1 . REAR-FACING CHILD RESTRAINT INSTALLATION USING LA T CH Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint.[...]

3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the[...]

5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS WARNING ● The three-point seat belt with Auto- matic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the AL[...]

Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used [...]

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test [...]

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORWARD-FACING CHILD RESTRAINT INSTALLATION USING LA T CH Refer to all W arnings and [...]

4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 5. Tighten the tether [...]

Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be[...]

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in[...]

8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

INSTALLING TOP TETHER STRAP (hatchback model) First, secure the child restraint with the LA T CH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. If necessary , raise or remove the head re- straint to position the top tether strap over the top of the seatback. If the head restraint is removed, store it in a secu[...]

2. If necessary , raise or remove the head re- straint to position the top tether strap over the top of the seatback. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See “Head re- straints” in this section for head re- straint adjustment, removal and inst[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child safety” , “Child restraints” and “Booster seats” sections before installing a child restraint. Follow these steps to install a booster[...]

If the seating position does not have an adjustable head restraint and it is interfering with the proper booster seat fit, try another seating position or a different booster seat. 4. P osition the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjusting the se[...]

Roof-mounted curtain side-impact supple- mental air bag system: This system can help cushion the impact force to the head of occu- pants in front and rear outboard seating positions in certain side-impact collisions. The curtain air bags are designed to inflate on the side where the vehicle is impacted. These supplemental restraint systems are de- [...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● The front pa[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. ARS1041 ARS1042 ARS1043 1-44 Safety—Seats, seat belts and supplemental restraint system[...]

WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are not properly restrained. Pre-teens and children should be properly re- strained in the rear seat, if possible. ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the fron[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, rollover or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of[...]

WARNING ● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the front sea[...]

1. Crash zone sensor 2. Supplemental front-impact air bag mod- ules 3. Air bag Control Unit (ACU) 4. Front seat-mounted side-impact supplemental air bag modules 5. Roof-mounted curtain side-impact supplemental air bag 6. Side satellite sensor 7. Seat belt with pretensioner NISSAN Advanced Air Bag System (front seats) This vehicle is equipped with t[...]

this section for further details. One front air bag inflating does not indicate improper performance of the system. If you have any questions about your air bag system, please contact NISSAN or your NISSAN dealer. If you are considering modification of your vehicle due to a disability , you may also contact NISSAN. Contact information is contained [...]

Status light The front passenger air bag status light is located near the climate controls. The light oper- ates as follows: ● Unoccupied passenger’s seat: The is OFF and the front passenger air bag is OFF and will not inflate in a crash. ● Passenger’s seat occupied by a small adult, child or child restraint as outlined in this section: The[...]

crash instead of being OFF . See “Child re- straints” earlier in this section for proper use and installation. If the front passenger seat is not occupied, the passenger air bag is designed not to inflate in a crash. However, heavy objects placed on the seat could result in air bag inflation, because of the object’s weight detected by the occ[...]

● Do not make unauthorized changes to your vehicle’s electrical system, sus- pension system or front end structure. This could affect proper operation of the front air bag system. ● T ampering with the front air bag system may result in serious personal injury. T ampering includes changes to the steering wheel and the instrument panel assembl[...]

inflate if the forces in another type of collision are similar to those of a higher severity side impact. They are designed to inflate on the side where the vehicle is impacted. They may not inflate in cer- tain side collisions. V ehicle damage (or lack of it) is not always an indication of proper side air bag and curtain air bag operation. When th[...]

● Work around and on the side air bag and curtain air bag systems should be done by a NISSAN dealer. Installation of electrical equipment should also be done by a NISSAN dealer. The SRS wir- ing harnesses* should not be modified or disconnected. Unauthorized electri- cal test equipment and probing devices should not be used on the side air bag sy[...]

1. SRS Air Bag W arning Labels (located on the sun visors) SUPPLEMENTAL AIR BAG WARNING LABELS W arning labels about the supplemental front- impact air bag system are placed in the vehicle as shown in the illustration. SUPPLEMENTAL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, moni- tors the circu[...]

Repair and replacement procedure The front air bags, side air bags, curtain air bags and pretensioners are designed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag warning light remains illuminated after inflation has occurred. Repair and replacement of these supplemental air bag systems should be [...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-57[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 4 Speedometer and odometer .....................2 - 5 T achometer ....................................2 - 6 Fuel gauge ....................................2 - 6 W arning/indicator lights and audible reminders ..[...]

Map lights (if so equipped) ........................ 2-37 Luggage compartment light (Hatchback) ............ 2-37 T runk light (Sedan) (if so equipped) ................. 2-38[...]

1. Outside mirror control switch (if so equipped) (P . 3-32) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-21) 3. Steering wheel switch for audio control and Bluetooth 姞 Hands-Free Phone System (if so equipped) (P . 4-53, 4-56) 4. Driver’s supplemental air bag/horn (P . 1-41, 2-24) 5. Meters and gauges (P . 2-4) 6. Cruise co[...]

27. V ehicle Dynamic Control (VDC) off switch (if so equipped) (P . 2-25) *:Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. Instruments and controls 2-3[...]

1. T achometer 2. Speedometer 3. Fuel gauge 4. Odometer (total/twin trip) 5. Automatic T ransmission (A/T)/ Continuously V ariable T ransmission (CVT) position indicator (if so equipped) 6. T rip odometer change button/Loose fuel cap indicator reset button (if so equipped) LIC0961 METERS AND GAUGES 2-4 Instruments and controls[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer 䊊 1 records the total distance the vehicle has been driven. The twin trip odometer 䊊 2 records the distance of individual [...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage. FUEL GAUGE The gauge indicates the approximate[...]

or Anti-lock Braking System (ABS) warning light (if so equipped) Low windshield-washer fluid warning light (if so equipped) Front passenger air bag status light or Brake warning light NISSAN Intelligent Key™ lock warning light (M/T models) (if so equipped) High beam indicator light (blue) Charge warning light NISSAN Intelligent Key™ warning lig[...]

CHECKING BULBS With all doors closed, apply the parking brake and place the ignition switch in the ON position without starting the engine. The following lights will come on: or , , , (blue) , , , If equipped, the following lights come on briefly and then go off: or , (red) , , , , , , , , If any light fails to come on, it may indicate a burned-out[...]

● Pressing the brake pedal with the en- gine stopped and/or a low brake fluid level may increase your stopping dis- tance and braking will require greater pedal effort as well as pedal travel. ● If the brake fluid level is below the MINIMUM or MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked at a NISSA[...]

The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See “Engine oil” in the “Maintenance and do-it-yourself” section of this manual. CAUTION Running the engine with the engine oil pressure warning light on could cause se- rious damage to the engine almost imme- diately.[...]

TPMS malfunction: If the TPMS is not functioning properly , the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer. For additional information, see “Tire Pressure Monitoring System (TP[...]

See “NISSAN Intelligent K ey™” in the “Pre- driving checks and adjustments” section. NISSAN Intelligent K ey™ warning light (if so equipped) The Intelligent K ey warning light illuminates green when the ignition switch can be turned. The Intelligent K ey warning light illuminates red when the ignition switch cannot be turned. The Intell[...]

tem” in the “Safety—Seats, seat belts and supplemental restraint system” section of this manual. WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag systems and/or pretensioner systems will not op- erate in an accident. T o help avoid injury to yourself or others, have[...]

Malfunction Indicator Light (MIL) If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction. The Malfunction Indicator Light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is i[...]

For additional information, see “Security sys- tems” later in this section. Slip indicator light (if so equipped) This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery . T urn signal/hazard indicator lights The ap[...]

When the buzzer sounds, be sure to check both the vehicle and the Intelligent K ey . See “NISSAN Intelligent K ey™” in the “Pre-driving checks and adjustments” section. Parking brake reminder chime A chime sounds if the parking brake is set and the vehicle is driven. The chime will stop if the parking brake is released or the vehicle spee[...]

● any request switch (Intelligent K ey mod- els) . ● the keyfob (if so equipped) or Intelligent K ey (if so equipped) . K eyfob and Intelligent K ey operation: ● Push the button. All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked. ● When the button is pushed with all doors locked, the haza[...]

If the engine fails to start using a registered key (for example, when interference is caused by another registered key , an automated toll road device or automatic payment device on the key ring) , restart the engine using the following pro- cedures: 1. Leave the ignition switch placed in the ON position for approximately 5 seconds. 2. Place the i[...]

If the light still remains on and/or the en- gine will not start, see a NISSAN dealer for NISSAN V ehicle Immobilizer System ser- vice as soon as possible. Please bring all registered keys that you have when visiting your NISSAN dealer for service. SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is placed in the O[...]

● Pre-mix windshield-washer fluid con- centrates with water to the manufactur- er’s recommended levels before pour- ing the fluid into the windshield-washer fluid reservoir. Do not use the windshield-washer fluid reservoir to mix the windshield-washer fluid con- centrate and water. The rear window wiper and washer operate when the ignition swit[...]

T o defrost the rear window glass and outside mirrors (if so equipped) , start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes. CAUTION When clea[...]

Headlight beam select 䊊 1 T o select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 䊊 2 Pull the lever back to select the low beam. 䊊 3 Pulling and releasing the lever flashes the headlight high beams on and off. Battery saver system If the ignition switch is placed in the OFF position [...]

INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the headlight control switch is in the or position. T urn the control to adjust the brightness of instru- ment panel lights when driving at night. T URN SIGNAL SWITCH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- plete[...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash. WARNING ● If stopping for an emergency, be sure to move the vehicle well off the road. ● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that[...]

The vehicle should be driven with the V ehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow , the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck ve[...]

● Do not use with accessories that ex - ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory. ● Use power outlets with the engine run- ning to avoid discharging the vehicle battery. ● Avoid using power outlets when the air conditioner, headlights or rear window defroster is on. ● Before ins[...]

SUNGLASSES HOLDER (if so equipped) T o open the sunglasses holder, push and release the rear center portion 䊊 A of the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● Do not use for anything other than sunglasses. Front LIC0980 Rear LIC0981 WIC1002 Instruments and controls 2-27[...]

● Do not leave sunglasses in the sun- glasses holder while parking in direct sunlight. The heat may damage the sunglasses. CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Ha[...]

Lower the rear center armrest to access the cup holders. GLOVE BOX Open the glove box by pulling the handle. WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. CONSOLE BOX (if so equipped) Fold down 䊊 1 the console box. T o open the console box, pull up on the lever 䊊 2 and raise the lid 䊊 [...]

COVERED STORAGE BIN Raise the lid to access the storage bin. CARGO COVER (if so equipped) (Hatchback models only) WARNING ● Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop. ● Do not leave the cargo cover in the vehicle with it disengaged from the holder. ● Proper[...]

T o remove the cargo cover: 䊊 1 Remove the straps from the rear hatch. 䊊 2 Remove the edge of the cargo cover privacy cloth from the rear seatback. 䊊 3 Remove the cargo cover holders from the rear pillar. P OWER WINDOWS (if so equipped) WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion [...]

1. Window lock button 2. P ower door lock switch 3. Front passenger’s side window switch 4. Right rear passenger’s window switch 5. Left rear passenger’s window switch 6. Driver’s side automatic switch Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close the front and rear passenge[...]

Rear power window switch The rear power window switches open or close only the corresponding windows. T o open the window , push the switch and hold it down 䊊 1 .T o close the window , pull the switch up 䊊 2 . Locking passengers’ windows When the window lock button is depressed, only the driver’s side window can be opened or closed. Push it[...]

When power window switch does not operate If the power window automatic function (closing only) does not operate properly , perform the fol- lowing procedure to initialize the power window system. 1. Place the ignition switch in the ON position. 2. Open the window more than halfway by operating the power window switch. 3. Pull up and hold the windo[...]

T o fully close the moonroof, push the switch toward 䊊 2 . T o open or close the moonroof part way , push the switch in any direction while the moonroof is sliding to stop it in the desired position. Tilting the moonroof Close the moonroof by pushing the switch toward 䊊 2 . Release the switch, then push the switch toward 䊊 2 again to tilt the[...]

When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up. If the auto-reverse function malfunctions and re- peats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually . Make sur[...]

● The doors are unlocked by the keyfob, a key or the power door lock switch while all doors are closed and the ignition switch is placed in the OFF position. ● The driver’s door is opened and then closed while the key is removed from the ignition switch. ● The key is removed from the ignition switch while all doors are closed. The lights wi[...]

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light also illuminates with other interior lights when the interior light switch is in the DOOR position. See “Interior light” earlier in this section. The lights will turn off automatically after 15 min- utes while the trunk lid is open to[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey™ (if so equipped) .........3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 4 Doors ............................................3 - 4 Locking with key ................................3 - 5 Locking with inside lock knob[...]

1. T wo master keys (black) with transpon- der chip and chrome NISSAN brand symbol on one side 2. T ransponder chip 3. K ey number plate A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the k[...]

Never leave these keys in the vehicle. As many as 4 Intelligent K eys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent K ey system and NISSAN V ehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent K ey[...]

CAUTION Always carry the mechanical key installed in the Intelligent Key slot. See “Doors” in this section and “Storage” in the “Instruments and Controls” section of this manual. NISSAN V EHICLE IMMOBILIZER SYSTEM KEYS Y ou can only drive your vehicle using the master keys which are registered to the NISSAN V ehicle Immobilizer System c[...]

LOCKING WITH KEY Manual (if so equipped) T o lock a door, turn the key toward the front of the vehicle 䊊 1 . T o unlock, turn the key toward the rear 䊊 2 . P ower (if so equipped) The power door lock system allows you to lock or unlock all doors at the same time. T urning the key toward the front 䊊 1 of the vehicle locks all doors. T urning t[...]

LOCKING WITH POWER DOOR LOCK SWITCH (if so equipped) T o lock all the doors without a key , push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊 1 . When locking the door this way , be certain not to leave the key inside the vehicle. T o unlock all the doors without a key , push the door lock switch (driver’[...]

CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally , especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the unlock position 䊊 1 , the door can be opened from the outside or the inside. When the lever [...]

● Do not place the keyfob for an extended period in an area where temperatures exceed 140°F (60°C) . ● Do not attach the keyfob with a key holder that contains a magnet. ● Do not place the keyfob near equip- ment that produces a magnetic field, such as a TV , audio equipment and per- sonal computers. If a keyfob is lost or stolen, NISSAN re[...]

Unlocking doors Press the button on the keyfob once. ● Only the driver’s door unlocks. ● The hazard warning lights flash once if all doors are completely closed with the ignition switch in any position except the ON posi- tion. ● The interior light turns on and the light timer activates for 30 seconds when the interior light switch is in th[...]

Using the interior light Press the button on the keyfob once to turn on the interior lights. For additional information, refer to “Interior light” in the “Instruments and controls” section in this manual. 1. T wo Intelligent Keys 2. Mechanical keys (inside Intelligent K eys) 3. K ey number plate WARNING ● Radio waves could adversely affec[...]

mental conditions may interfere with the opera- tion of the Intelligent K ey under the following operating conditions. ● When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broadcasting station. ● When in possession of wireless equipment, such as a cellular telephone, transceiver, and C[...]

OPERATING RANGE The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range from the request switch 䊊 1 . When the Intelligent K ey battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent K ey operating range becomes narrower, and the Intelligent [...]

● T o prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent K ey with you and then lock the doors. ● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. NISSAN INTELLI[...]

Locking doors 1. Place the ignition switch to the L OCK posi- tion. (Remove the key if any key is in the ignition switch.) 2. Close all doors and the rear hatch/trunk. 3. Push any door handle request switch 䊊 1 or the rear hatch/trunk request switch 䊊 2 while carrying the Intelligent K ey with you. 4. All doors and the rear hatch/trunk will loc[...]

CAUTION ● After locking the doors using the re- quest switch, make sure that the doors have been securely locked by operating the door handles or the rear hatch/trunk opener switch. ● When locking the doors using the re- quest switch, make sure to have the Intelligent Key in your possession be- fore operating the request switch to prevent the I[...]

Unlocking doors 1. Carry the Intelligent K ey . 2. Push the door handle request switch 䊊 1 or the rear hatch/trunk request switch 䊊 2 . 3. The hazard warning lights flash once and the outside buzzer sounds once. 4. Push the door handle request switch 䊊 1 again within 1 minute to unlock all doors and the rear hatch/trunk. If a door handle is p[...]

HOW TO USE THE REMOTE KEYLESS ENTRY FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent K ey . The remote keyless function can operate at a distance of 33 ft (10 m) away from the vehicle. The operating distance de- pends upon the conditions around the vehicle. The remote keyless[...]

Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 1 minute to unlock all doors and the rear hatch/trunk. All doors and the rear hatch/trunk will be locked automatically unless one of the following opera- tions is performed within 1 minute after pressing the button.[...]

● Any button is pressed on the Intelligent K ey . ● Pushing the request switch on the driver or passenger door with the Intelligent K ey in range of the door handle. Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the Intelligent K ey . T o deactivate: Press and hold the and buttons for at least 2 se[...]

䊊 1 Intelligent K ey lock warning light (M/T models) or P position selecting warning light (CVT or A/T models) 䊊 2 Intelligent K ey system warning light W ARNING LIGHTS AND AUDIBLE REMINDERS The Intelligent K ey system is equipped with a function that is designed to minimize improper operations and to help prevent the vehicle from being stolen.[...]

When the Intelligent K ey lock warning light ( ) (M/T models) in the instrument panel blinks: ● Make sure the shift selector is in gear. ● Make sure the ignition switch is in the L OCK position. Alarm and warning when the engine starts When the Intelligent K ey system warning light ( ) blinks red and the outside buzzer sounds, make sure the Int[...]

T ROUBLESHOOTING GUIDE Symptom Possible Cause Remedy When pushing the door handle request switch The front door beep sounds for approxi- mately 2 seconds. The doors cannot be locked. T ake out the Intelligent Key from the vehicle and push the door handle request switch. When closing the doors The front door beep sounds for approxi- mately 10 second[...]

1. Pull the hood lock release handle 䊊 1 located below the instrument panel until the hood springs up slightly . 2. Locate the lever 䊊 2 in between the hood and grille and push the lever sideways with your fingertips. 3. Raise the hood 䊊 3 . 4. Remove the support rod 䊊 4 and insert it into the slot 䊊 5 . Hold the coated parts 䊊 A when r[...]

WARNING The rear hatch must be closed securely before driving. An open rear hatch could allow dangerous exhaust gases to be drawn inside the vehicle. See “Exhaust gas” in the “Starting and driving” section of this manual. OPENING THE REAR HATCH T o open the rear hatch, unlock it with one of the following operations, then push the opener swi[...]

REAR HATCH RELEASE The rear hatch release mechanism allows the rear hatch to be opened in the event of a discharged battery . T o release the rear hatch from the inside of the vehicle, perform the following operations: 1. Fold the rear seats down. See “Folding rear seat” in the “Safety — seats, seat belts and supplemental restraint system?[...]

K EY OPERATION T o open the trunk lid, turn the key clockwise. T o close the trunk lid, lower and push the trunk lid down securely . OPENING THE TRUNK LID USING THE OPENER SWITCH (if so equipped) T o open the trunk lid, unlock it with one of the following operations, then push the opener switch 䊊 A . ● Push the trunk request switch or door hand[...]

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. The interior trunk lid r[...]

FUEL-FILLER CAP WARNING ● Gasoline is extremely flammable and highly explosive under certain condi- tions. Y ou could be burned or seriously injured if it is misused or mishandled. Always stop the engine and do not smoke or allow open flames or sparks near the vehicle when refueling. ● Do not attempt to top off the fuel tank after the fuel pump[...]

● For additional information, see the “Malfunction Indicator Light (MIL)” in the “Instruments and Controls” section in this manual. ● If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage. T o remove the fuel-filler cap: 1. T urn the cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap h[...]

TILT OPERATION Push the lock lever 䊊 1 down and adjust the steering wheel up or down 䊊 2 to the desired position. Pull the lock lever up to lock the steering wheel in place. WARNING Do not adjust the steering wheel while driving. Y ou could lose control of your vehicle and cause an accident. T o block out glare from the front, swing down the su[...]

REARVIEW MIRROR The night position 䊊 1 reduces glare from the headlights of vehicles behind you at night. Use the day position 䊊 2 when driving in daylight hours. WARNING Use the night position only when neces- sary, because it reduces rear view clarity. OUTSIDE MIRRORS WARNING ● Objects viewed in the outside mirror on the passenger side are [...]

Electric control type (if so equipped) The outside mirror remote control will operate only when the ignition switch is placed in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . Manual folding outside mirrors Pull the outside mirror towa[...]

4 Display screen, heater, air conditioner, audio and phone systems Control panel buttons — color screen with Navigation System (if so equipped) ..................4 - 2 How to use the touch screen ....................4 - 3 How to use the back button .....................4 - 5 How to use the SETUP button ...................4 - 5 button ............[...]

WARNING ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● In case you notice any foreign object in the system hardware, spill liquid on it, or notice smoke or smell coming from it, stop using the system immediately and contact your nearest NISSAN dealer. Ignoring such conditions ma[...]

*For Navigation system control buttons, refer to the separate Navigation System Owner’s Manual. When you use this system, make sure the engine is running. If you use the system with the engine not running (ignition ON or ACC) for a long time, it will discharge the battery, and the engine will not start. Reference symbols: “Example” — W ords[...]

Adjusting the item: For screens where an item can be adjusted incre- mentally , such as when adjusting the bass and treble for the audio system, touch the “+” key 䊊 1 or the “ ⫺ ” key 䊊 2 to adjust the settings of an item. When there are more items than can be dis- played on one screen, touch the up arrow 䊊 3 to scroll up the page o[...]

● OK: Completes the character input. T ouch screen maintenance If you clean the display screen, use a dry , soft cloth. If additional cleaning is necessary , use a small amount of neutral detergent with a soft cloth. Never spray the screen with water or de- tergent. Dampen the cloth first and then wipe the screen. HOW TO USE THE BACK BUTTON Press[...]

System setup Select the “System” key to select and/or adjust various functions of the system. A screen with additional options will appear. Display: Select the “Display” key to adjust the appearance of the display . The following settings can be adjusted: Brightness The brightness of the display can be set to V ery Bright, Bright, Default, [...]

Clock: Select the “Clock” key to adjust the time and the appearance of the clock on the display . The fol- lowing settings can be adjusted: Time Format The clock can be set to 12 hours or 24 hours. Use GPS Clock When this setting is activated, the clock is set and continually updated via the GPS used by the Navigation System. Set Clock Manually[...]

Beep tones: Select the “Beep T ones” key to toggle the beep tones feature on or off. When activated, a beep sound will be heard when a pop-up message appears on the screen or a button on the unit (such as the button) is pressed and held for two seconds. Reset all settings/memory: Select the “Reset All Settings/Memory” key to return all sett[...]

Adjust air flow open/close 䊊 1 Adjust air flow direction 䊊 2 WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or [...]

1. Air intake lever (Outside air circulation/ Air recirculation) (T ype A) 2. Air intake lever (Outside air circulation/ Air recirculation) (T ype B, MAX A/C if so equipped) 3. Air flow control dial 4. Fan control dial 5. Air conditioner button (if so equipped) 6. T emperature control dial CONTROLS Fan control dial The fan control dial turns the fa[...]

Air conditioner button (if so equipped) Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. The indicator light comes on when the air conditioner is operating. T o turn off the air conditioner, push the button again. The air conditioner cooling function oper- ates only when the eng[...]

2. T urn the air flow control dial to the position. 3. T urn the fan control dial to the desired posi- tion. 4. T urn the temperature control dial to the de- sired position. Heating and defogging This mode heats the interior and defogs the wind- shield. 1. Move the air intake lever to the posi- tion. 2. T urn the air flow control dial to the positi[...]

Dehumidified defogging This mode is used to defog the windows and dehumidify the air. 1. Move the air intake lever to the posi- tion. 2. T urn the air flow control dial to the position. 3. T urn the fan control dial to the desired posi- tion. When the or position is selected, the air conditioner automatically turns on (however, the indicator light [...]

WHA1185 WHA1186 4-14 Display screen, heater, air conditioner, audio and phone systems[...]

WHA1187 WHA1188 Display screen, heater, air conditioner, audio and phone systems 4-15[...]

WHA1192 4-16 Display screen, heater, air conditioner, audio and phone systems[...]

The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to [...]

Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) , static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteri[...]

Compact disc (CD) player CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player at a time. ● Only use high quality 4.7 in (12 cm) round disc s that ha[...]

Compact Disc with MP3 or WMA (if so equipped) T erms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near “CD quality” sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track from CD-ROM can red[...]

Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software[...]

Specification chart : Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 8 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling fr[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil[...]

Universal Serial Bus (USB) memory (if so equipped) This system supports various USB memory sticks, USB hard drives and iP od 姞 players. There are some USB devices which may not be sup- ported with this system. ● Make sure that the USB device is connected correctly into the USB connector. ● Do not force the memory stick or USB cable into the U[...]

● If the iP od 姞 automatically selects large video podcast files while in the shuffle mode, the vehicle center display may momentarily black out, but it will soon recover. ● Improperly plugging in the iP od 姞 may cause a checkmark to be displayed on and off (flickering) . Always make sure that the iPod 姞 is connected properly . ● The iP[...]

1. PRESET A·B·C button 2. CD eject button 3. TUNE/SEEK buttons 4. CD insert slot 5. CD button 6. FM·AM button 7. Station select (1 - 6) buttons 8. (CD seek/track) button 9. (CD rewind) button 10. RDM button 11. VOL control knob 12. PWR button 13. MENU button 14. RPT button 15. (CD fast forward) button 16. (CD seek/track) button FM/AM RADIO WITH [...]

MENU button (BASS, TREBLE , FADE , BALANCE and CLOCK) : Press the MENU button to change the mode as follows: BAS → TRE → FA D → BAL → CLK → Audio → BAS T o adjust Bass, T reble, Fade and Balance, press the MENU button until the desired mode appears in the display . Press the TUNE/SEEK button to adjust Bass and T reble to the desired lev[...]

TUNE/SEEK buttons: Manual tuning Press the or button for less than 0.5 seconds for manual tuning. SEEK tuning Press the or button for more than 1.5 seconds to seek through the frequencies. Seek tuning begins from low to high frequencies, or high to low frequencies depending on which button is pressed, and stops at the next broad- casting station. O[...]

RDM button: When the RDM button is pressed while the com- pact disc is being played, the play pattern can be changed as follows: RDM ←→ Normal RDM: T racks from the disc that is currently play- ing will be played randomly . CD EJECT button: When the button is pressed with a com- pact disc loaded, the compact disc will be ejected. When the butto[...]

1. CD L OAD button 2. CD insert slot 3. PRESET A·B·C button 4. CD button 5. RADIO button* 6. CD eject button 7. DISP button 8. CL OCK button 9. SEEK/TRACK/FILE button 10. SCRL button 11. SCAN button 12. AUDIO button 13. Station and CD select (1–6) buttons 14. VOL control knob 15. PUSH PWR button 16. AUX button 17. AUX IN jack 18. RPT/RDM button[...]

FM/AM/SA T RADIO WITH COMPACT DISC (CD) CHANGER (if so equipped) For all operation precautions, see ⬙ Audio opera- tion precautions ⬙ earlier in this section. No satellite radio reception is available when the RADIO button is pressed to access satellite radio stations unless optional satellite receiver and an- tenna are installed and an XM 姞 [...]

FM display mode T o change the text displayed while listening to an FM station that broadcasts with Radio Data Sys- tem (RDS) , press the DISP button. The DISP button will allow you to change RDS information as follows: Station call number → Program type → Station information → Station call number. ● Station call number displays the radio f[...]

● Title mode displays the song title, show name, or temperature of the selected satel- lite radio station. SCRL (Scroll) button: Press the SCRL button to scroll through CD/MP3 text that is too long to be displayed on the first line of the display . FM/AM/SA T radio operation FM/AM/SA T band select : Pressing the RADIO button will change the band [...]

If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. Radio data system (RDS) : RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) . Cur- rently , most RDS stations are in large cities, [...]

TUNE/FF·REW/FOLDER: While playing a CD with MP3s, press the TUNE/FF·REW/FOLDER button or to scan forward or backward through available folders. T o fast forward or rewind through an audio track, press the TUNE/FF·REW/FOLDER button or for more than 1.5 seconds. SCAN button: While listening to a CD, press the SCAN button to preview the first 10 se[...]

All discs: ● Press and hold the button for more than 1.5 seconds. The compact discs will be ejected one by one. If a disc is not removed within 15 seconds, or the button is pressed again during the eject sequence, the entire disc eject sequence will be can- celed. When this button is pressed while the compact disc is being played, the compact dis[...]

11. SCAN/RPT button 12. AUDIO button 13. AUX IN jack 14. Station select (1 - 6) buttons 15. VOLUME control knob 16. PWR button 17. iP od MENU button 18. BACK button 19. ENTER button 20. SEEK/TRACK button FM/AM/SA T RADIO WITH COMPACT DISC (CD) PLAYER (T ype A) (if so equipped) For all operation precautions, see ⬙ Audio opera- tion precautions ⬙[...]

4. Press the CL OCK button again to exit the clock set mode. If no action is taken, the display will return to the regular clock display after 10 seconds. DISP (display) button This button works during FM, CD and iP od 姞 operation. See the detailed function for this but- ton in the section for each mode. iPOD 姞 MENU, ENTER and BACK buttons Thes[...]

4. Other buttons can be set in the same man- ner. If the battery cable is disconnected or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations. DISP/TEXT button: When the DISP/TEXT button is pressed while in FM radio mode, the radio display will change as follows: Frequency → PTY → PS → Frequency Comp[...]

SCAN/RPT button: When the SCAN/RPT button is pressed while a compact disc is playing, the play pattern can be changed as follows: CD: REPEA T TRACK → RANDOM TRACK → RE- PEA T DISC CD with MP3 or WMA: REPEA T FOLDER → REPEA T TRACK → RAN- DOM TRACK → RANDOM FOLDER → REPEA T DISC REPEA T TRACK: the current track will be re- peated. RANDOM[...]

1. XM button 2. CD insert slot 3. Display screen 4. CD eject button 5. SETUP button 6. BACK button 7. TUNE/SCROLL knob, AUDIO button 8. Station select (1 - 6) buttons 9. AUX button 10. VOL/ON-OFF control knob 11. SEEK/CA TEGOR Y button 12. CD button 13. FM-AM button *No satellite radio reception is available when the XM button is pressed to ac- ces[...]

T urn the VOL/ON·OFF control knob to adjust the volume. This vehicle may be equipped with Speed V ol- ume for audio. When this feature is active, the audio volume changes as the driving speed changes. Audio settings: Press the SETUP button to display the audio settings on the screen. These settings can also be displayed by pressing the AUDIO butto[...]

FM/AM/SA T radio operation FM·AM button: Press the FM·AM button to change the band as follows: AM → FM1 → FM2 → AM If another audio source is playing when the FM·AM button is pressed, the audio source play- ing will automatically be turned off and the last radio station played will begin playing. The FM stereo indicator (ST) is shown on th[...]

T uning with the touchscreen: When in AM or FM mode, the radio can be tuned using the touchscreen. T o bring up the visual tuner, touch the “T une” key on the lower right corner of the screen. A screen appears with a bar running from low frequencies on the left to high frequencies on the right. T ouch the screen at the location of the frequency[...]

CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text may be displayed (when a CD en- coded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the text is displayed listing the artist, album and song title. There are other keys displayed on the screen when a CD is playing: Random: T ouch the “Random?[...]

Browse: T ouch the “Browse” key to display the titles on the CD in list format. T ouch the title of a song in the list to begin playing that song. If an MP3 CD is playing, touching the “Browse” key will also list the folders on the disc. Follow the procedure for selecting a song with the touchscreen to choose a folder. SEEK/CA TEGORY (Rever[...]

For more information about the USB input jack, see “USB interface” in this section. EJECT button: When the button is pressed with a com- pact disc loaded, the compact disc will eject and the last source will be played. When the button is pressed twice with a compact disc loaded, the compact disc will be ejected further for easier CD removal. If[...]

While connected to the vehicle, the iP od 姞 can only be operated by the vehicle audio controls. *i P o d 姞 is a trademark of Apple Inc., registered in the U.S. and other countries. Compatibility The following models are compatible: ● iP od 姞 Classic - 1st through 6th generation ● iP od 姞 Mini - 1st and 2nd generation ● iP od 姞 Nano [...]

P odcast: ALL RPT ←→ TRK RPT For more information about P odcasts, see the iP od 姞 owner’s manual. Audiobook: NORMAL → F AST → SLOW iP od 姞 * PLAYER OPERATION WITH NAVIGATION SYSTEM (if so equipped) Connecting iP od 姞 T o connect an iPod 姞 to the vehicle so that the iP od 姞 can be controlled with the audio system controls and di[...]

Audio main operation AUX button: Place the ignition switch in the ACC or ON position and press the AUX button repeatedly until the iP od 姞 mode is displayed on the screen. If another audio source is playing and the iP od 姞 is connected, press the AUX button repeatedly to switch to the iP od 姞 mode. If the vehicle audio system is turned off wh[...]

Random: T ouch the “Random” key to apply a random play pattern to the iP od 姞 . When the random mode is active, the icon is displayed to the left of the song title or album name to denote which random pattern is applied. T o cancel Random mode, touch the “Random” key until no icon is displayed. Repeat : T ouch the “Repeat” key to appl[...]

Play information Information about the audio files being played is shown on the display screen of the vehicle’s audio system. T ouch “Browse” to display the list of folders and files on the USB device. T ouch the name of a song on the screen to begin playing that song. SEEK/CA TEGORY button: Press the SEEK/CA TEGOR Y button while an audio fil[...]

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. ● Always place the discs in the storage case when they are not being used. ● T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. ● Do not use a [...]

POWER on switch With the ignition switch in the ACC or ON posi- tion, push the POWER switch to turn the audio system on. SOURCE select switch (models without Navigation System) Push the SOURCE select switch to change the mode in the following sequence: PRESET A → PRESET B → PRESET C → PRESET A . With a CD inserted and an auxiliary device plug[...]

The antenna cannot be shortened, but can be folded down or removed. When you need to remove the antenna, turn the antenna rod coun- terclockwise 䊊 B . T o install the antenna rod, turn the antenna rod clockwise 䊊 A and hand tighten. CAUTION ● Always properly tighten the antenna rod during installation or the antenna rod may break during vehic[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the previously connected cellular phone turned on and carried in the ve- hicle. Y ou can connect up to 5 different Bluetooth 姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth 姞 Hands-Free[...]

IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. – This Class B digital apparatus meets all re- quirements of the Canadian Interference- Causi[...]

● In most cases you can interrupt the voice feedback to speak the next command by pressing the button on the steering wheel. ● T o use the system faster, you may speak the second level commands with the main menu command on the main menu. For example, press the button and after the tone say , “Call Redial.” NO TE: The combined command of Ca[...]

CONTROL BUTTONS The control buttons for the Bluetooth 姞 Hands- Free Phone System are located on the steering wheel. PHONE/SEND Press the button to initiate a VR session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in t[...]

NO TE: Y ou must press the button within 5 seconds to change the language. 5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed. Connecting procedure NO TE: The connecting procedure must be per- formed when the vehicle is stationary. If the vehicle st[...]

four” as the 3rd group. For dialing more than 10 digits or any special characters, say “Special Dialing” . See “How to say num- bers” in this section for more information. 5. When you have finished speaking the phone number, the system repeats it back and an- nounces the available commands. 6. Say: “Dial” 䊊 D . The system acknowledg[...]

(Speak Digits) 䊊 B When prompted by the system, say the number you wish to call. Refer to “How to say numbers” and “Making a call by entering a phone number” in this section for more details. “Special number” 䊊 C For dialing more than 10 digits or any special characters, say “Special Number” . When the system acknowledges the co[...]

“Phonebook” (phones without automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “T ransfer Entry” 䊊 A “Delete Entry” 䊊 B “List Names” 䊊 C For phones that do not support automatic down- load of the phonebook (PBAP Bluetooth 姞 [...]

“Phonebook” (phones with automatic phonebook download function) NO TE: The “T ransfer Entry” command is not avail- able when the vehicle is moving. Main Menu “Phonebook” “List Names” 䊊 A “T ransfer Entry” 䊊 B “Delete Entry” 䊊 C “Record Name” 䊊 D For phones that support automatic download of the phonebook (PBAP Bl[...]

The system repeats the number and prompts you for the next command. When you have finished entering numbers or transferring an entry , choose “Store.” The system confirms the name, location and number. “Delete Entry” 䊊 C Use the Delete Entry command to erase one entry from the phonebook. After the system rec- ognizes the command, speak th[...]

SPEAKER ADAPTATION (SA) MODE Speaker Adaptation allows up to two out-of- dialect users to train the system to improve rec- ognition accuracy . By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different speaker adaptation model for each connected[...]

● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five one ● record name ● four three pause two nine pause zero ● delete redial number ● phonebook list names ● call eight oh five four one ● corr[...]

Symptom Solution System fails to interpret the command correctly. 1. Ensure that the command is valid. See “List of voice commands” in this section. 2. Ensure that the command is spoken after the tone. 3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle. 4. Ensure that the ambient [...]

MEMO 4-70 Display screen, heater, air conditioner, audio and phone systems[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) (if so equipped) ................................5 - 3 Avoiding collision and rollover ....................5 - 5 Off-ro[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded gasoline will seriously re- duce the three-way catalyst’s ability to help reduce exhaust pollutants. ● Keep your engine tuned up. Malfunc- tions in th[...]

● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h) . Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted for all 4 tires. After the tires are inflat[...]

Some examples are: – Facilities or electric devices using similar radio frequencies are near the vehicle. – If a transmitter set to similar frequencies is being used in or near the vehicle. – If a computer (or similar equipment) or a DC/AC converter is being used in or near the vehicle. FCC Notice: Changes or modifications not expressly ap- p[...]

● If you decide that it is not safe to return the vehicle to the road surface based on vehicle, road or traffic conditions, gradually slow the vehicle to a stop in a safe place off the road. RAPID AIR PRESSURE LOSS Rapid air pressure loss or a “blow-out” can occur if the tire is punctured or is damaged due to hitting a curb or pothole. Rapid [...]

WARNING ● Never remove the key or turn the igni- tion switch to the LOCK position while driving. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or per- sonal injury. ● Never turn the ignition switch to the LOCK position while driving. This may cause the driver to lose control of the vehicle a[...]

Operating range The Intelligent K ey functions can only be used when the Intelligent K ey is within the specified operating range. When the Intelligent K ey battery is almost dis- charged or strong radio waves are present near the operating location, the Intelligent K ey sys- tem’s operating range becomes narrower and may not function properly . [...]

CONTINUOUSLY V ARIABLE T RANSMISSION (CVT) (if so equipped) The ignition lock is designed so that the ignition switch cannot be turned to the L OCK position until the shift selector is moved to the P (Park) position. ● When placing the ignition switch in the L OCK position, make sure that the shift se- lector is in the P (Park) position ● When [...]

T o remove the key from the ignition switch: 1. Shift the shift selector to the P (Park) posi- tion with the ignition switch in the ON posi- tion. 2. Place the ignition switch in the L OCK posi- tion. 3. Remove the key from the ignition switch. If the shift selector is shifted to the P (Park) position after the ignition switch is turned to the OFF [...]

T ype B models with Intelligent Key: The ignition lock is designed so that the switch can only be turned from 䊊 1 to the L OCK position when the PUSH release button has been pressed. NO TE: ● The Intelligent K ey lock warning light blinks and the buzzer sounds when the igni- tion switch is turned to the L OCK position and the ignition PUSH rele[...]

4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key . If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices. ● Make sure the area around the vehicle is clear. ● Check fluid levels s[...]

When the Intelligent K ey system warning light ( A/T or CVT models) or the Intel- ligent K ey lock warning light ( M/T models) in the meter blinks in red and the inside warning buzzer emits a short beep, be sure that the shift selector is in the P (Park) position (A/T or CVT models) and the igni- tion switch is securely returned to the L OCK positi[...]

AUTOMATIC TRANSMISSION (if so equipped) WARNING ● Do not depress the accelerator pedal while shifting from P (Park) or N (Neu- tral) to R (Reverse) , D (Drive) , 2 or 1. Always depress the brake pedal until shifting is completed. Failure to do so could cause you to lose control and have an accident. ● Cold engine idle speed is high, so use caut[...]

WARNING ● Apply the parking brake if the shift se- lector is in any position while the en- gine is not running. Failure to do so could cause the vehicle to move unex - pectedly or roll away and result in seri- ous personal injury or property damage. ● If the shift selector cannot be moved from the P (Park) position while the engine is running a[...]

Shift lock release If the battery is discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed. T o move the shift selector, release the shift lock. The shift selector can be moved to N (Neutral) . T o push the shift lock release, complete the fol- lowing procedure: 1. Place the ignition switch i[...]

OFF: For driving up and down long slopes where engine braking is nec- essary push the Overdrive switch once. The indicator light in the instrument panel will illuminate. When cruising at a low speed or climbing a gentle slope, you may feel uncomfortable shift shocks as the transmission shifts into and out of Overdrive repeatedly . In this case, pus[...]

NO TE: Engine power may be automatically re- duced to protect the CVT if the engine speed increases quickly when driving on slippery roads or while being tested on some dynamometers. Starting the vehicle 1. After starting the engine, fully depress the foot brake pedal before moving the shift selector out of the P (Park) position. 2. K eep the foot [...]

Use the P (Park) selector position when the ve- hicle is parked or when starting the engine. Make sure the vehicle is completely stopped. The brake pedal must be depressed and the shift selector button pushed in to move the shift selector from N (Neutral) or any drive position to P (Park) . Apply the parking brake. When parking on a hill, apply the[...]

3. Remove the shift lock release cover as shown. 4. Insert a small screwdriver in the shift lock release slot and push downward. 5. Move the shift selector to the N (Neutral) position while holding down the shift lock release. 6. Now the vehicle may be moved to the de- sired location. If the shift selector cannot be moved out of P (Park) , have a N[...]

WARNING When the high fluid temperature protec- tion mode or fail-safe operation occurs, vehicle speed may be gradually reduced. The reduced speed may be lower than other traffic , which could increase the chance of a collision. Be especially care- ful when driving. If necessary, pull to the side of the road at a safe place and allow the transmissi[...]

Start the vehicle in 1st gear and shift to 2nd, 3rd, 4th up to 5th or 6th gear in sequence according to vehicle speed. On the 5-speed manual transmission, you cannot shift directly from 5th gear into R (Reverse) . First shift into N (Neutral) , then into R (Reverse) . On the 6–speed manual transmission to back up, lift up on the shift selector ri[...]

WARNING ● Be sure the parking brake is fully re- leased before driving. Failure to do so can cause brake failure and lead to an accident. ● Do not release the parking brake from outside the vehicle. ● Do not use the shift selector in place of the parking brake. When parking, be sure the parking brake is fully engaged. ● Do not leave childre[...]

1. ACCEL/RES switch 2. COAST/SET switch 3. CANCEL switch 4. ON/OFF switch PRECAUTIONS ON CRUISE CONTROL ● If the cruise control system malfunctions, it cancels automatically . The SET indicator light in the instrument panel then blinks to warn the driver. ● If the SET indicator light blinks, turn the cruise control switch off and have the sys- [...]

● The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control. T o cancel the preset speed, use one of the following three methods. ● Push the CANCEL button; the SET indicator light in the instrument panel goes out. ● T ap the brake pedal; the SET indicator light goes out. ?[...]

● Accelerate slowly and smoothly . Maintain cruising speeds with a constant accelerator position. ● Drive at moderate speeds on the highway . Driving at high speed lowers fuel economy . ● Avoid unnecessary stopping and braking. Maintain a safe distance behind other ve- hicles. ● Use a proper gear range which suits road conditions. On level [...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) or in an appropriate gear for manual trans- mission models. Failure to do so could cause the v[...]

WARNING ● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. ● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. Y ou will still have control of the vehicle but the steering will[...]

WARNING ● While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. ● If the engine is not running or is turned off while driving, the power assist for the brakes will not work. Braking will be harder. W et brakes When th[...]

WARNING Do not pump the brake pedal. Doing so may result in increased stopping distances. Self-test feature The ABS includes electronic sensors, electric pumps, hydraulic solenoids and a computer. The computer has a built-in diagnostic feature that tests the system each time you start the engine and move the vehicle at a low speed in forward or rev[...]

When the VDC system operates, the indi- cator in the instrument panel flashes so note the following: ● The road may be slippery or the system may determine some action is required to help keep the vehicle on the steered path. ● Y ou may feel a pulsation in the brake pedal and hear a noise or vibration from under the hood. This is normal and ind[...]

● When driving on extremely inclined sur- faces such as higher banked corners, the VDC system may not operate prop- erly and the indicator may flash or both the and indicator lights may illuminate. Do not drive on these types of roads. ● When driving on an unstable surface such as a turntable, ferry, elevator or ramp, the indicator may flash or[...]

3. Tire chains may be used. For details see “Tire chains” in the “Maintenance and do-it- yourself” section of this manual. SPECIAL WINTER EQUIPMENT It is recommended that the following items be carried in the vehicle during winter: ● A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. ● A sturdy [...]

T o use the engine block heater: 1. T urn the engine off. 2. Open the hood and unwrap the engine block heater cord. 3. Plug the engine block heater cord into a grounded 3 wire, 3 pronged extension cord. 4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (V AC) outlet. 5. The engine block heater must be p[...]

6 In case of emergency Flat tire ...........................................6 - 2 Tire Pressure Monitoring System (TPMS) (if so equipped) ................................6 - 2 Changing a flat tire .............................6 - 2 Jump starting .....................................6 - 7 Push starting ..................................... 6-10 If y[...]

TIRE PRESSURE MONITORING SYSTEM (TPMS) (if so equipped) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, one or more of your tires is significantly under-inflated. If the vehicle is being driven with low tire pressur[...]

6. Have all passengers get out of the vehicle and stand in a safe place, away from traffic and clear of the vehicle. WARNING ● Make sure the parking brake is securely applied and the automatic transmission (A/T) or the continuously variable trans- mission (CVT) models is shifted into P (Park) , or the manual transmission (M/T) model into R (Rever[...]

T o remove the jack, take off the strap. If neces- sary , remove the spare tire first to easily access the jack strap. If equipped with spacers remove them before removing the spare tire. Removing wheel cover (if so equipped) CAUTION Do not use your hands to pry off wheel caps or wheel covers. Doing so could re- sult in personal injury. T o remove [...]

● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe[...]

Always refer to the proper illustrations for the correct placement and jack -up points for your specific vehicle model and jack type. Carefully read the caution label attached to the jack body and the following instruc- tions. 1. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrench. Do not remove the wheel nu[...]

4. Lower the vehicle slowly until the tire touches the ground. Then, with the wheel nut wrench, tighten the wheel nuts securely in the sequence illustrated ( 䊊 A , 䊊 B , 䊊 C , 䊊 D ). Lower the vehicle completely . WARNING ● Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose or come off. This could [...]

● Do not allow battery fluid to come into contact with eyes, skin, clothing or painted surfaces. Battery fluid is a cor- rosive sulfuric acid solution which can cause severe burns. If the fluid should come into contact with anything, imme- diately flush the contacted area with water. ● Keep battery out of the reach of children. ● The booster [...]

WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift se- lector t[...]

CAUTION ● Do not push start this vehicle. The three-way catalyst may be damaged. ● Automatic T ransmission (A T) or Con- tinuously V ariable Transmission (CVT) models cannot be push-started or tow- started. Attempting to do so may cause transmission damage. ● For manual transmission models, never try to start the vehicle by towing it. When th[...]

WARNING Be careful not to allow your hands, hair, jewelry or clothing to come into contact with, or get caught in, engine belts or the engine cooling fan. The engine cooling fan can start at any time. 6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coo[...]

T OWING RECOMMENDED BY NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. 䊊 A (A/T) or (CVT) 䊊 B (M/T) WCE0194 䊊 A (A/T) or (CVT) 䊊 B (M/T) WCE0195 6-12 In case of emergency[...]

CAUTION ● Never tow Automatic T ransmission (A/T) or Continuously V ariable Trans- mission (CVT) models with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to the transmission. If it is nec- essary to tow the vehicle with the rear wheels raised always use towing d[...]

● Only use devices specifically designed for vehicle recovery and follow the manufacturer’s instructions. ● Always pull the recovery device straight out from the front of the vehicle. Never pull at an angle. ● Route recovery devices so they do not touch any part of the vehicle except the attachment point. If your vehicle is stuck in sand, s[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPOTS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBODY In areas where road salt is used in winter, it is necessary to clean the und[...]

Occasionally remove loose dust from the interior trim, plastic parts and seats using a vacuum cleaner or soft bristled brush. Wipe the vinyl and leather surfaces with a clean, soft cloth damp- ened in mild soap solution, then wipe clean with a dry , soft cloth. Regular care and cleaning is required in order to maintain the appearance of the leather[...]

Floor mat positioning aid This vehicle includes a front floor mat bracket to act as a floor mat positioning aid. NISSAN floor mats have been specially designed for your ve- hicle model. The driver’s and passenger’s side floor mats have a grommet hole incorporated in them. P osition the mat by placing the floor mat bracket hook through the floor[...]

T emperature High temperatures accelerate the rate of corro- sion to those parts which are not well ventilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use acceler- ates the corrosion process. Road salt also accel- erates the disintegration of paint surfaces. T O PROTECT YOUR VEHICLE [...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions . . .........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ..........[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions which should be closely observed. WARNING ● Park the vehicle on a level surface, ap- ply the parking brake securely and block the wheels to prevent [...]

HR16DE Engine Model 1. Engine oil filler cap 2. Brake and clutch (*1) fluid reservoir 3. Air cleaner 4. Battery 5. Fuse/fusible link box 6. Automatic T ransmission Fluid (A TF) dipstick (*2) 7. Radiator cap 8. Engine coolant reservoir 9. Engine oil dipstick 10. Drive belt location 11. Windshield-washer fluid reservoir *1: For Manual T ransmission ([...]

MR18DE Engine Model 1. Engine oil filler cap 2. Brake and clutch (*1) fluid reservoir 3. Air cleaner 4. Battery 5. Fuse/Fusible link box 6. Automatic T ransmission Fluid (A TF)/ Continuously V ariable T ransmission (CVT) dipstick (*2) 7. Radiator cap 8. Engine oil dipstick 9. Engine coolant reservoir 10. Drive belt location 11. Windshield-washer fl[...]

The engine cooling system is filled at the factory with Genuine NISSAN Engine Coolant (blue) to provide year-round anti-freeze and coolant pro- tection. The anti-freeze solution contains rust and corrosion inhibitors. Additional engine cooling system additives are not necessary . WARNING ● Never remove the radiator or coolant reservoir cap when t[...]

CHANGING ENGINE COOLANT A NISSAN dealer can change the engine coolant. The service procedure can be found in the NISSAN Service Manual. Improper servicing can result in reduced heater performance and engine overheat- ing. WARNING ● T o avoid the danger of being scalded, never change the coolant when the en- gine is hot. ● Never remove the radia[...]

5. Remove the dipstick again and check the oil level. It should be between the H (High) and L (Low) marks 䊊 1 . This is the normal oper- ating oil level range. If the oil level is below the L (Low) mark 䊊 2 , remove the oil filler cap and pour recommended oil through the opening. Do not overfill 䊊 3 . 6. Recheck oil level with the dipstick. I[...]

4. Place a large drain pan under the drain plug 䊊 B . 5. Remove the drain plug 䊊 B with a wrench by turning it counterclockwise and completely drain the oil. If the oil filter is to be changed, remove and replace it at this time. See “Changing engine oil filter” later in this section. WARNING ● Prolonged and repeated contact with used eng[...]

CHANGING ENGINE OIL FILTER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 C . 4. Loosen the oil filter with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn yourself. [...]

CAUTION ● Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. ● Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT , which is not covered by the NISSAN new vehicle limited warranty. When checking or replacement of CVT fluid is required, we recommend your NISSAN dealer for servicing. WARNING ?[...]

● The fluid can be checked at fluid tempera- tures of 86 - 122°F (30 - 50°C) using the COLD range on the dipstick after the engine is warmed up and before driving. However, the fluid should be re-checked using the HO T range. 1. Park the vehicle on a level surface and set the parking brake. 2. Start the engine and then move the shift selector t[...]

For further brake and clutch fluid specification information, refer to “Capacities and recom- mended fuel/lubricants” in the “T echnical and consumer information” section of this manual. WARNING ● Use only new fluid from a sealed con- tainer. Old, inferior or contaminated fluid may damage the brake and clutch (if so equipped) systems. The[...]

WINDSHIELD-WASHER FLUID RESERVOIR T o check the windshield-washer fluid level, use your finger to plug the center hole of the cap/tube assembly , then remove it from the reservoir. If there is no fluid in the tube, add fluid. Add a washer solvent to the windshield-washer fluid reservoir for better cleaning. In the winter season, add a windshield-wa[...]

● Do not operate the vehicle if the fluid in the battery is low. Low battery fluid can cause a higher load on the battery which can generate heat, reduce bat- tery life, and in some cases lead to an explosion. ● When working on or near a battery, al- ways wear suitable eye protection and remove all jewelry. ● Do not tip the battery. Keep the [...]

V ehicles operated in high temperatures or under severe conditions require frequent checks of the battery fluid level. JUMP STARTING If jump starting is necessary , see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may have to be replaced. Contact a NISSAN de[...]

1. Visually inspect the belt for signs of unusual wear, cuts, or fraying. If the belt is in poor condition, have it replaced or adjusted by a NISSAN dealer. 2. Have the belt checked regularly for condi- tion. REPLACING SPARK PLUGS Platinum-tipped spark plugs (if so equipped) It is not necessary to replace platinum-tipped 䊊 A spark plugs as freque[...]

WARNING Be sure the engine and ignition switch are off and that the parking brake is engaged securely. CAUTION Be sure to use the correct socket to re- move the spark plugs. An incorrect socket can damage the spark plugs. If replacement is required, see your NISSAN dealer for assistance. The air cleaner filter should not be cleaned and reused. Repl[...]

CLEANING If your windshield is not clear after using the windshield washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing with clear water. Clean each blade [...]

Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B . Rear window wiper blade Contact a NISSAN dealer if checking or replace- ment is required. If the brakes do not operate properly , have the [...]

Under some driving or climate conditions, occa- sional brake squeak, squeal or other noise may be heard. Occasional brake noise during light to moderate stops is normal and does not affect the function or performance of the brake system. Proper brake inspection intervals should be followed. For more information regarding brake inspections, see the [...]

ENGINE COMPARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not come on, check for an open fuse. 1. Be sure the ignition switch and the headlight switch are OFF . 2. Open the engine hood. 3. Remove the[...]

Fusible links If any electrical equipment does not operate and the fuses are in good condition, check the fusible links in the holders 䊊 1 , 䊊 2 and 䊊 3 . If any of these fusible links are melted, replace only with genuine NISSAN parts. For checking and replacing the fusible links in holders 䊊 2 and 䊊 3 , see a NISSAN dealer. PASSENGER CO[...]

4. If the fuse is open 䊊 A , replace it with an equivalent good fuse 䊊 B . 5. Push the fuse box cover to install. 6. If a new fuse also opens, have the electrical system checked and repaired by a NISSAN dealer. CAUTION Be careful not to allow children to swallow the battery or removed parts. T ype A WDI0452 T ype B LDI0456 BATTERY REPLACEMENT 8[...]

K EYFOB (if so equipped) Replace the battery in the keyfob as follows: 䊊 1 Open the lid using a coin 䊊 A . 䊊 2 Remove the battery 䊊 B . 䊊 3 Install a new battery 䊊 C with the “+” facing down. ● Hold the battery by the edges. Holding the battery across the contact points will seri- ously deplete the storage capacity . ● Do not to[...]

FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interfere[...]

4. Close the lid securely as illustrated 䊊 C 䊊 D . 5. Operate the buttons to check the operation. See a NISSAN dealer if you need assistance for replacement. FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. This device complies w[...]

● High pressure halogen gas is sealed inside the halogen bulb. The bulb may break if the glass envelope is scratched or the bulb is dropped. ● Use the same number and wattage as shown in the chart. Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the ou[...]

䊊 1 Front view 1. Map lights (if so equipped) 2. Interior light 3. Front fog light (if so equipped) 4. Headlight assembly 䊊 2 Rear view (hatchback) 䊊 3 Rear view (sedan) 5. Luggage compartment light (hatchback) T runk light (sedan) (if so equipped) 6. High-mounted stop light 7. License plate light 8. Rear combination light WDI0575 Maintenance[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth to protect the housing. SDI1805 Interior light SDI1499A 8-32 Maintenance and do-it-yourself[...]

Use a cloth to protect the housing. Open the trunk to access the bulb base. Use a cloth to protect the housing. Map lights (if so equipped) WDI0624 High-mounted stop light (sedan) LDI0625 Luggage compartment light (Hatchback) SDI1873 Maintenance and do-it-yourself 8-33[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) (if so equipped) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is l[...]

Incorrect tire pressure, including un- der inflation, may adversely affect tire life and vehicle handling. WARNING ● Improperly inflated tires can fail suddenly and cause an accident. ● The Gross V ehicle Weight Rating (GVWR) is located on the F .M .V.S.S./C .M .V .S.S. certifica- tion label. The vehicle weight ca- pacity is indicated on the Ti[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See “V ehicle load- ing information” in the “T echnical and consumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the facto[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

TIRE LABELING Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information iden- tifies and describes the fundamental characteristics of the tire and also pro- vides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify the tire in case of [...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

For additional traction on icy roads, studded tires may be used. However, some U.S. states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS Use o[...]

Wheel nut tightening torque: 83 ft-lb (113 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Infor- mation” (Canada) in the Warranty In- formation Booklet. Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the un[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel recommendation . . .........................9 - 4 Engine oil and oil filter recommendations ..........9 - 6 Air conditioner system (if so equipped) refrigerant and oil recommendations ..............9 - 7 Specifications ..............................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) US measure Imp measure Liter Recommended Fluids and Lubricants Fuel 13-1/4 gal 11 gal 50.[...]

Capacity (Approximate) US measure Imp measure Liter Recommended Fluids and Lubricants Air conditioning system refrigerant — — HFC-134a (R-134a) *8 Air conditioning system oil HR16DE and MR18DE with M/T or A/T — — Genuine NISSAN A/C System Oil T ype R (DH-PR) or equivalent *8 MR18DE with CVT — — NISSAN A/C System Oil T ype S (DH-PS) or e[...]

FUEL RECOMMENDATION Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be [...]

E–85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel V ehicle (FFV) . Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the a[...]

ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve [...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model HR16DE MR18DE T ype Gasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder, inline 4-cylinder, inline Bore x Stroke in (mm) 3.071 x 3.291 (78.0 x 83.6) 3.307 x 3.192 (84.0 x 81.1) Displacement cu in (cm 3 ) 97.51 (1,598) 109.65 (1,797) Firing order 1–3–4–2 1–3–4–2 Idle speed No adjustment is necessa[...]

WHEELS AND TIRES Wheel type Size Offset in (mm) Aluminum and steel 14 x 5.0JJ 15 x 5.5JJ 16 x 6.0J 1.57 (40) 1.57 (40) 1.57 (40) Tire size P185/65R14 P185/65R15 P195/55R16 Spare tire T125/70D15 DIMENSIONS AND WEIGHTS Unit: in (mm) Body T ype Hatchback Sedan Overall length 169.2 (4,297) 176.1 (4,473) Overall width 66.7 (1,695) 66.7 (1,695) Overall h[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICATION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Weig[...]

EMISSION CONTROL INFORMATION LABEL The emission control information label is at- tached to the underside of the hood as shown. TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICATION LABEL (if so equipped) The air conditioner specifica[...]

Use the following steps to mount the front license plate: Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag: ● License plate bracket ● License plate bracket screws x 2 ● License plate screws x 2 ● Screw grommets x 2 1. Hold the license plate bracket 䊊 1 and make a shallow hole in the bumpe[...]

● GVW (Gross V ehicle Weight) - curb weight plus the combined weight of passengers and cargo. ● GVWR (Gross V ehicle Weight Rat- ing) - maximum total combined weight of the unloaded vehicle, pas- sengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is lo- cated on the F .M.V .S.S./C.M.V .S.S. certifica[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. Before driving a loaded vehicle, confirm that you do not exceed the Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GAWR) for your vehicle. Se[...]

Do not tow a trailer with your vehicle. FLAT TOWING T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is sometimes used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION ● Failure to follow these guidelines can result in severe transmission damage. ● Whenever fl[...]

WARNING The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristic s. T emperature A , B and C The temperature grades are A (the highest) , B, and C, representing the tire’s resistance to the generation of heat, and its abi[...]

If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform the National Highway T raffic Safety Administration (NHTSA) in addi- tion to notifying NISSAN. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a [...]

the type of personally identifying data routinely acquired during a crash investigation. T o read data recorded by an EDR, special equip- ment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manu- facturer and NISSAN dealer, other parties, such as law enforcement, that have the special equip- ment, can read th[...]

Insist on the use of genuine NISSAN collision parts! If you want your vehicle to be restored using parts made to NISSAN’s original exacting specifica- tions – if you want to help it to last and hold its resale value, the solution is simple. T ell your insurance agent and your repair shop to only use Genuine NISSAN Collision Parts. NISSAN does n[...]

MEMO 9-22 T echnical and consumer information[...]

10 Index A ABS (Anti-lock Braking System) ....... .5-29 Air bag (See supplemental restraint system) .................... .1-41 Air bag system Front (See supplemental front impact air bag system) .............. .1-48 Side and curtain (See supplemental side air bag and curtain side-impact air bag system) .............. .1-52 Air bag warning labels ..[...]

Precautions on child restraints ........ .1-22, 1-29, 1-33, 1-38 T op tether strap anchor point locations . .1-27 Child safety rear door lock ........... .3-7 Chimes, audible reminders .......... .2-15 Cleaning exterior and interior .......... .7-2 Clock ............... .4-27, 4-31, 4-37 Clutch Clutch fluid ................. .8-15 C.M.V .S.S. certi[...]

Front seats .................... .1-2 Fuel Capacities and recommended fuel/lubricants ................ .9-2 Fuel economy ............... .5-26 Fuel gauge .................. .2-6 Fuel octane rating .............. .9-5 Fuel recommendation ............ .9-4 Fuel-filler door and cap .......... .3-27 Fuel-filler door lock opener lever ..... .3-27 Loose [...]

Interior light ................. .2-36 Light bulbs ................. .8-29 Low tire pressure warning light ...... .2-10 Low windshield-washer fluid warning light ..................... .2-11 Passenger air bag and status light .... .1-49 Security indicator light ........... .2-14 T runk light ................. .2-38 W arning/indicator lights and audi[...]

FM/AM radio with compact disc (CD) player ................. .4-37 FM/AM/SA T radio with compact disc (CD) changer ............... .4-31 FM/AM/SA T radio with compact disc (CD) player ................. .4-41 Steering wheel audio control switch . . . .4-53 Readiness for inspection maintenance (I/M) test .................... .9-19 Rear center seat bel[...]

Rear window and outside mirror defroster switch .................... .2-21 Rear window wiper and washer switches .................. .2-20 T urn signal switch ............. .2-23 V ehicle dynamic control (VDC) off switch .2-25 Windshield wiper and washer switch . . .2-19 T T achometer ................... .2-6 Theft (NISSAN vehicle immobilizer system[...]

When traveling or registering your vehicle in another country ............... .9-10 Windows Locking passengers’ windows ...... .2-33 Manual windows .............. .2-34 Power rear windows ............ .2-33 Power windows .............. .2-31 Rear power windows ........... .2-33 Windshield wiper and washer switch .... .2-19 Windshield-washer fluid[...]

RECOMMENDED FUEL: Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91) . CAUTION ● Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. ● Under no circumstances should a leaded gasoline be us[...]

® 2011 VE R S A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2011 N IS SAN VE R SA C11-D Printing : May 2010 Publication No.: OM1E 0C11U0 Printed in U .S.A. C11-D ' 11[...]