Nissan Leaf (2016) инструкция обслуживания

2016 N I S S AN L EAF Z E O-D Z E O-D ' 16 Printing : July 2015 (14) Publication No.: 0C11U0 Printed in U .S.A. OM16EA 0Z E0U0 ® 2016 L EAF OWN E R’S MAN UAL For y our safety , read car efully and keep in this v ehicle.[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this [...]

MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its perfor- mance, safety or durability, and may even violate governmental regulations. In addition, damage or performance problems resulting from modification may not be covered under NISSAN war- ranties. This manual includes information for all features [...]

If you see the symbol above, it means “Do not do this” or “Do not let this happen” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action. Arrows in an illustration that are similar to those [...]

NISSAN CARES ... Both NISSAN and your NISSAN certified LEAF dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN certified LEAF dealer are our primary concerns. Y our NISSAN certified LEAF dealer is always available to assist you with all your automobile sales and service needs. However, if[...]

T able of contents Illustrated table of contents EV Overview Charging Safety–Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Display screen, heater, air conditioner, audio and phone systems Starting and driving In case of emergency Appearance and care Maintenance and do-it yourself T[...]

[...]

0 Illustrated table of contents Seats, seat belts and Supplemental Restraint System (SRS) ............................. .0-2 Exterior front ......................... .0-3 Exterior rear ......................... .0-4 Passenger compartment .................. .0-5 Cockpit ............................ .0-6 Instrument panel ....................... .0-8 [...]

1. Rear head restraints/headrests (P . 1-5) 2. Child restraint anchor points (for top tether strap child restraint) (P . 1-18) 3. Roof-mounted curtain side-impact supple- mental air bags (P . 1-38) 4. Front seat belt with pretensioner(s) and shoulder height adjuster (P . 1-8, 1-38) 5. Front head restraints/headrests (P . 1-5) 6. Front seats (P . 1-[...]

1. Charge port lid —Charging lid switch (P . 3-19) —Front camera (if so equipped) (P . 4-11) 2. Hood (P . 3-17) 3. Headlight and turn signal lights — Switch operation (P . 2-42) — Bulb replacement (P . 8-22) 4. Wiper and washer switch — Switch operation (P . 2-38) — Blade replacement (P . 8-13) — Windshield-washer fluid (P . 8-11) 5. [...]

1. Rear view camera (P . 4-3, 4-11) 2. Rear wiper and washer switch — Switch operation (P . 2-38) — Windshield-washer fluid (P . 8-11) 3. High-mounted stop light — Bulb replacement (P . 8-22) 4. Rear window defroster (P . 2-41) 5. Solar cell module (if so equipped) (P . EV-25) 6. Antenna — Satellite radio antenna (P . 4-57) 7. Rear combinat[...]

1. Room light (P . 2-58) 2. Sun visors (P . 3-22) 3. Map lights — Switch operation (P . 2-58) — Bluetooth® Hands-Free Phone System (without Navigation) microphone (P . 4-59) — Bluetooth® Hands-Free Phone System (with Navigation) microphone (Refer to LEAF Navigation System Owner’s Manual) 4. Sunglasses holder (P . 2-51) 5. Mirror — Insid[...]

1. TRIP switch for twin trip odometer (P . 2-5) 2. T rip computer switch (P . 2-22) 3. Instrument brightness control switch (P . 2-41) 4. Headlight, fog light and turn signal switch — Headlight (P . 2-42) — T urn signal light (P . 2-42) — Fog light (if so equipped) (P . 2-45) 5. Steering-wheel-mounted controls (left side) — Audio control (P[...]

16. V ehicle Dynamic Control (VDC) OFF switch (P . 2-48) 17. Heated steering wheel switch (if so equipped) (P . 2-45) 18. Fuse box cover (P . 8-17) Illustrated table of contents 0-7[...]

1. Side vents (P . 4-22) 2. Meters and gauges (P . 2-5) 3. Center multi-function control panel — Navigation system (Refer to LEAF Naviga- tion System Owner’s Manual) — Without navigation system (P . 4-38) 4. Hazard warning flasher switch (P . 6-2) 5. Center vents (P . 4-21) 6. Rear window defroster switch (P . 2-41) 7. Front passenger supplem[...]

This vehicle is equipped with an upper display and a lower display. 1. Master warning lights (P . 2-18) 2. ECO indicator (P . 2-10) 3. Speedometer (P . 2-6) 4. Clock (P . 2-11) 5. Outside air temperature (P . 2-10) 6. T urn signal/Hazard indicator light (P . 2-21) 7. Li-ion battery capacity level gauge (P . 2-10) 8. Li-ion battery available charge [...]

1. Brake fluid reservoir (P . 8-10) 2. 12-volt battery (P . 8-12) 3. Fuse holder (P . 8-17) 4. Fuse/Fusible link holder (P . 8-17) 5. Coolant reservoir cap (P . 8-8) 6. Windshield-washer fluid reservoir (P . 8-11) 7. Fuse/Fusible link holder (P . 8-17) MO T OR COMP ARTMENT 0-10 Illustrated table of contents[...]

Warn- ing light Name Page 12-volt battery charge warning light 2-13 Anti-lock Braking Sys- tem (ABS) warning light 2-14 Approaching Vehicle Sound for Pedestrians (VSP) system warning light 2-14 BRAKE system warning light (yellow) 2-14 BRAKE warning light (red) 2-15 Electric shift control sys- tem warning light 2-16 Warn- ing light Name Page EV syst[...]

Indica- tor light Name Page Plug-in indicator light 2-20 P ower limitation indica- tor light 2-20 READ Y to drive indica- tor light 2-20 Security indicator light 2-20 Slip indicator light 2-21 T urn signal/hazard indi- cator lights 2-21 V ehicle Dynamic Control (VDC) OFF indicator light 2-21 0-12 Illustrated table of contents[...]

EV Overview The EV (Electric Vehicle) system ............ .EV-2 Li-ion battery ........................ .EV-2 Driving with a discharged Li-ion battery ...... .EV-3 Charging the 12-volt battery ............. .EV-5 Li-ion battery warmer (if so equipped) ....... .EV-5 High voltage precautions ................. .EV-7 High-voltage components ...........[...]

The LEAF is an electric vehicle. Some of the vehicle’s systems operate differently and have different operating characteristics than vehicles equipped with an internal combustion engine. It is important to carefully review the entire Owner’s Manual for this reason. The main difference is the LEAF is powered by electricity . The LEAF does not re[...]

NO TE: • If the outside temperature is −13°F (−25°C) or less, the Li-ion battery may freeze and it cannot be charged or provide power to run the vehicle. Move the vehicle to a warm location. • The capacity of the Li-ion battery in your vehicle to hold a charge will, like all such batteries, decrease with time and usage. As the battery age[...]

There are three levels of information that will be displayed as the Li-ion battery becomes dis- charged: 1. The following warning lights illuminate on the instrument panel and messages are displayed on the vehicle information display at the same time to indicate low Li-ion battery charge: • The low battery charge warning light • The master warn[...]

2. If the vehicle is driven and the Li-ion battery continues to discharge, the driving range on the instrument panel changes to “—-” 䊊 2 . Messages are displayed on the Navigation Sys- tem screen (if so equipped) . For additional infor- mation, refer to “Low battery warning” in the “In- struments and controls” section of this manual[...]

The Li-ion battery warmer uses electrical power from an external source when a charger is con- nected to the vehicle. The Li-ion battery warmer uses electrical power from the Li-ion battery when the charger is not connected to the vehicle. NO TE: • Connect the charger to the vehicle and place the power switch in the OFF posi- tion when parking th[...]

HIGH-VOL T AGE COMPONENTS WARNING • The EV (Electric Vehicle) system uses high voltage up to approximately DC 400 volt. The system can be hot during and after starting and when the vehicle is shut off. Be careful of both the high voltage and the high temperature. Fol- low the warning labels that are at- tached to the vehicle. • Never disassembl[...]

WARNING In case of a collision: • If your vehicle is drivable, pull your vehicle off the road, push the P (Park) position switch on the shift lever, apply the parking brake and turn the EV (Electric V ehicle) system off. • Check your vehicle to see if there are exposed high-voltage parts or cables. For their locations, refer to “High volt- ag[...]

EMERGENC Y SHUT -OFF S Y STEM The emergency shut-off system is activated and the high-voltage system automatically turns off in the following conditions: - Front and side collisions in which the air bags are deployed. - Certain rear collisions. - Certain EV (Electric Vehicle) system malfunc- tions For the above collisions and certain other EV syste[...]

• Less deceleration is provided by the re- generative brake system when the Li-ion battery is fully charged. The regenerative brake is automatically reduced when the Li-ion battery is fully charged to prevent the Li-ion battery from becoming over- charged. The regenerative brake is also automatically reduced when the battery temperature is high/l[...]

EV Overview EV-11[...]

EV-12 EV Overview[...]

BEFORE DRIVING Y OUR VEHICLE (MODELS WITH NA VIGA TION S Y STEM) The Li-ion battery charging status and the Li-ion battery warmer (if so equipped) operation can be checked using an internet enabled smart phone or personal computer at home. Y ou may also choose to have SMS messages (text messages) sent to a cel- lular phone. Additionally, the heater[...]

Checking Li-ion battery charging status The Li-ion battery charge status can be checked on the NISSAN Data Center website via an inter- net enabled smart phone or personal computer. If the Li-ion battery is not sufficiently charged, you can start charging the Li-ion battery via the re- mote charge function. For additional information, refer to “C[...]

Operating the climate control system before driving The vehicle heating and air conditioning system can be turned on via remote control with an internet enabled smart phone or personal com- puter. This allows the interior of the vehicle to be heated or cooled while the vehicle is charging. This re- duces the load on the Li-ion battery while the veh[...]

Notification of the Li-ion battery warmer operation (if so equipped) Y ou can be notified with the status of the Li-ion battery warmer operation on the NISSAN Data Center website via an internet enabled smart phone or personal computer. When the power switch is in the OFF position and the charge connector is not connected, if the Li-ion battery war[...]

ST ARTING Y OUR VEHICLE 1. Depress the brake pedal. 2. Press the power switch. 3. Check that the READ Y to drive indicator light illuminates and the start up sound is audible. For additional information, refer to “Ready to drive indicator light” in the “Instruments and controls” section of this manual. 4. For models with navigation system: [...]

DRIVING THE VEHICLE 1. Depress the brake pedal. 2. Release the parking brake. 3. Move the shift lever into the D (Drive) position. When released, the shift lever returns to its original center position. 4. Confirm that the vehicle is in the D (Drive) position. The indicator next to the “D” by the shift lever illuminates and “D” is displayed[...]

NO TE: The regenerative brake converts the vehi- cle’s forward motion to electric power to help slow the vehicle. Use the ECO mode for maximum vehicle range and for city driving. The ECO mode helps reduce power consumption by reducing acceleration when compared to the same accelerator pedal position in the D (Drive) position. While the vehicle is[...]

If the low battery charge warning light illuminates, the Li-ion battery charge is too low for travel. For additional information, refer to ⬙ Low battery charge warning light” in the “Instruments and controls” section of this manual. Charge the Li-ion battery as soon as possible. EV-20 EV Overview[...]

Parking the vehicle 1. When stopping the vehicle, push the P (Park) position switch on the shift lever while de- pressing the brake pedal. Confirm that the vehicle is in the P (Park) position by checking the shift indicator located near the shift lever on the vehicle information display . 2. Apply the parking brake. 3. Push the power switch to the [...]

CHARGING AFTER DRIVING Charging the Li-ion battery When you return home, connect the vehicle to the charging station installed at your home using the normal charge connector. Charge the vehicle or set the charging timer function to have the vehicle charge at a specific time. For additional information, refer to “Charg- ing timer” in the “Char[...]

RANGE The distance you can drive the vehicle (range) varies considerably depending upon available charge, weather, temperature, usage, battery age, topography, and driving style. Refer to the Monroney label (window sticker) for the official EPA range. Y our actual range can vary, either initially or as the battery ages and with use over time. For a[...]

• Release the accelerator pedal to slow down and do not apply the brakes when traffic and road conditions allow . – This vehicle is equipped with a regenerative brake system. The primary purpose of the regenerative brake system is to provide some power to recharge the Li-ion battery and extend driving range. A secondary ben- efit is “engine b[...]

LI-ION BA TTERY MAINTENANCE In addition to the regular maintenance recom- mended by NISSAN, the LEAF requires some special Li-ion battery inspections. • Refer to the NISSAN W arranty Information Booklet for significant limitations, exclusions and possible voiding of your warranty resulting from failure to have these necessary inspec- tions, repai[...]

ECO indicator: This indicator provides instant information about how efficiently the vehicle is being operated. Y ou can see how changing your driving style or op- eration of vehicle accessories affects power con- sumption. For additional information, refer to “ECO indica- tor” in the “Instruments and controls” section of this manual. Lower[...]

Driving range: This indicator displays the estimated driving range (calculated based on a program that ac- counts for current driving style and operational conditions) that can be driven before recharging is necessary. For additional information, refer to “Driving range” in the “Instruments and controls” section of this manual. Li-ion batte[...]

W arning and indicator lights The EV (Electric Vehicle) system uses the follow- ing EV (Electric V ehicle) specific warning and indicator lights. 1. Master warning light (red) 2. Master warning light (yellow) 3. 12-volt battery charge warning light 4. Plug-in indicator light 5. READ Y to drive indicator light 6. Power limitation indicator light 7. [...]

The sound stops when the vehicle stops. The sound does not stop with the vehicle in the R (Reverse) position even if the vehicle stops. WARNING • If the sound cannot be heard, pedestri- ans may not notice the oncoming ve- hicle, which may cause an accident re- sulting in serious injury or death. Immediately contact a NISSAN certi- fied LEAF deale[...]

SOLAR CELL MODULE (IF SO EQUIPPED) This vehicle uses a solar cell module to provide power to the 12-volt battery. The solar cell mod- ule only provides power to help maintain the charge of the 12-volt battery; it will not recharge a discharged 12-volt battery. The solar cell module does not provide power to the Li-ion battery . For maintenance, ref[...]

Charging Precautions on charging ................. .CH-2 T ypes of charge and how to charge the Li-ion battery ........................... .CH-5 How to normal charge ................ .CH-9 How to trickle charge ................ .CH-11 How to quick charge (if so equipped) ...... .CH-15 Charge connector lock switch .......... .CH-18 Charging methods [...]

WARNING • If you use any medical electric devices, such as an implantable cardiac pace- maker or an implantable cardiovascu- lar defibrillator, check with the electric medical device manufacturer concern- ing the effects that charging may have on implanted devices before starting the charge operation. Charging may affect the operation. • Make s[...]

– Do not store and use charging equipment in locations where the temperature is over 185°F (85°C) . – Do not place the charging equip- ment close to a heater or other heat source. • Make sure the cap is closed on the charge port when charging is finished. If the charge port lid is closed when the cap is open, water or foreign materials may [...]

• If the vehicle will not be used for an ex- tended period of time, charge the Li-ion battery using the long life mode once ev- ery three months. Do not operate the charging timer repeatedly while the charge connector is connected to the ve- hicle after the Li-ion battery charging is completed. Doing so may discharge the 12-volt battery. For addi[...]

TYPES OF CHARGE AND HOW T O CHARGE THE LI-ION BA TTER Y Charging CH-5[...]

CH-6 Charging[...]

This vehicle is an electric vehicle and it requires electricity to operate. The Li-ion battery is the only source of power to operate the vehicle. It is important to conserve power and plan your charging needs when you drive to avoid com- pletely discharging the Li-ion battery and being unable to drive. There are three methods available to charge t[...]

A vehicle equipped with a quick charge port is compatible with most CHAdeMO (Japanese in- dustry standard) connectors on charging sta- tions. Charging stations using this standard are UL certified and safe to use in the US. While supported by NISSAN, this connector may not become the US SAE standard. Quick charging is possible (even several times a[...]

Li-ion battery tem- perature gauge Estimated charge time 䊊 E 10 or more seg- ments illuminated More than approxi- mately 60 minutes NO TE: Charging time is typically limited to 60 min- utes when using a quick charger. Press the start switch on the quick charger after it stops if additional charge time is necessary to reach an 80% charge. For addi[...]

• Immediate charge, charging timer and remote charge (models with navigation system) can be performed in the normal charge mode. For ad- ditional information, refer to “Charging meth- ods” in this section. • The Genuine NISSAN charging equipment communicates with the vehicle before Li-ion battery charging starts. If this communication does [...]

T o stop normal charge: 1. Ensure that the charge connector lock is not engaged. For additional information, refer to “Charge connector lock switch” in this section. 2. Press the button on the charge connector, release the lock and remove the charge con- nector from the charge port and properly store it. 3. After closing the charge port cap on [...]

– The device has parts that may spark inside. Do not use it where gasoline, paint, or flammable liquids are used or stored. – Do not use if a malfunction occurs or if the charger has been damaged in any manner. Return to a NISSAN certified LEAF dealer for replace- ment. – The charger contains no user ser- viceable parts. Do not attempt to rep[...]

T o start trickle charging: *:Y ou can pass a rope through the hole 䊊 A on the control box in order to hang it up while the Li-ion battery is charging. 1. Push the P (Park) position switch to place the vehicle in the P (Park) position and apply the parking brake. 2. When charging the Li-ion battery , place the power switch in the OFF position. Wh[...]

8. Connect the charge connector to the charge port. If it is connected normally , a beep will sound once. 9. If charging has started, or if the Li-ion battery is waiting for the charging timer, a beep will sound twice and the charging status indicator light display will change. For additional infor- mation, refer to “Charging status indicator lig[...]

5. Store in its case. NO TE: Perform the following procedure to store the EVSE (Electric Vehicle Supply Equipment) in the case. a. Wind the charge cable into a size that will allow it to be stored in the case (approximately 9.8 in (250 mm) in diameter) . b. Place the EVSE (Electric V ehicle Sup- ply Equipment) control box into the back of the case.[...]

NO TE: Quick charging is possible (even several times a day) if the battery temperature is not near the red zone. If the battery tem- perature reaches the red zone, in order to protect the battery, quick charging is not allowed and the power limitation mode will be triggered. When the Li-ion battery available charge and the Li-ion battery capacity [...]

CAUTION • Be sure to insert the charge connector straight into the quick charge port right up to the base. Failure to do so may result in the Li-ion battery not charging or could cause damage to the charging equipment. 5. Grasp the lock lever and lock the charge connector. 6. Follow the instructions on the quick charge equipment to start charging[...]

T o finish charging: 1. Confirm charging is stopped by looking at the indicators on the dash. The charge connector can be disconnected from the vehicle when charging is stopped. 2. Unlock the charge connector, remove from the vehicle and properly store it. 3. Close the quick charge port cap. 4. Shut the charge port lid. CAUTION • As the quick cha[...]

AUT O mode T o select AUT O mode, push the AUT O side 䊊 1 of the charge connector lock switch. The indicator light on the switch 䊊 3 will illuminate. When AUT O mode is selected, the charge con- nector is locked while charging is in process. The charge connector will be unlocked automatically when charging is complete. L OCK mode T o select the[...]

Unlock operation using charge port lid opener switch 1. Push the charge port lid opener switch. 2. The charging status indicator light flashes three times and a beep sounds three times. The charge connector lock is unlocked for 30 seconds. 3. After 30 seconds, the charge connector lock is locked. NO TE: • Depending on the charging station, the lo[...]

CHARGING TIMER Use charging timer to schedule when the Li-ion battery charges. The vehicle automatically begins charging at the scheduled times when the charge connector is connected to the vehicle. The timers do not need to be reset each time the Li-ion battery needs charging. Charging timer Use the charging timer to schedule when the Li-ion batte[...]

• When only the charging timer end time is set, the system automatically stops charg- ing when the Li-ion battery charges to a full charge. Charging may stop before the scheduled end time. • If charging timer and the Climate Ctrl. Timer are operating at the same time due to an overlap of the timer settings, you can prioritize which function rec[...]

Timer Charge setting screen: T wo different timer settings can be registered (one on the left side and another on the right side of the screen) . 1. T ouch to turn on/of the timer. The indicator light will turn on when the timer setting is turned on. 2. Indicates start/end time of the scheduled timer charge. 3. T ouch corresponding keys to adjust t[...]

• When the Charging Timer and the Climate Ctrl. Timer are set at the same time, the charging start time moves to an earlier time. • Depending on the Li-ion battery condition and the power source status, charging may end earlier than the charging end time. This is not a malfunction. 1. Push the switch 䊊 A on the left side of the combination me[...]

T o turn the timer on or off, use the switch to highlight “On” or “Off” and then push the switch. If “On” is selected, an additional screen is displayed that allows you to change the time of the charging timer. 4. The hour portion of the time is highlighted on the screen. Push the switch to change the hour field in increments of one hou[...]

2. Press the immediate charge switch. 3. Connect the normal or trickle charge cable when the charging status indicator light changes to display immediate charge mode. For additional information, refer to “Charging status indicator lights” in this section. NO TE: • Y ou have 15 minutes to connect a normal or trickle charge connector to the veh[...]

NO TE: • Establishing the NissanConnect SM EV service is necessary before using this ser- vice. For additional information, refer to the LEAF Navigation System Owner’s Manual. • T o check the Li-ion battery charging status using an internet enabled smart phone or personal computer, the following condi- tions must be met: – The vehicle must [...]

When the normal charge connector lock is unlocked All of the indicator lights, 䊊 1 to 䊊 3 , will flash and a beep will sound three times when the normal charge connector lock switch on the Intelligent K ey or the charge port lid opener switch is pushed. When the normal charge connector is con- nected incorrectly All of the indicator lights, 䊊[...]

When charging When the Li-ion battery is being charged, the charging status indicator lights will change de- pending on the amount the Li-ion battery is charged. *: This value is also displayed by the illumination of segments of the Li-ion battery available charge gauge on the instrument panel. When fully charged All of the indicator lights 䊊 1 t[...]

The indicator will also flash for up to 5 minutes if the electrical power to the EVSE is interrupted during charging. Charging will restart automati- cally when the electrical power to the EVSE is restored if the charging connector is connected. The charge start beep will not sound when charging restarts. The indicator will also flash when the foll[...]

READ Y CHARGE F AUL T Status and action to be taken 䡩䡩 䡩 Every time the EVSE plug is connected to an outlet, all indicator lights illuminate for 0.5 seconds. 䡩 쏹쏹 After initial processing is completed, when the EVSE is not connected to the vehicle, or the EVSE is con- nected to the vehicle but charging is not being performed. 䡩䡩 쏹[...]

Symptom Possible cause Possible solution Charging cannot be per- formed. The vehicle power switch is in the ON position. Before charging, place the vehicle power switch in the OFF position. Both the normal charge connector and the quick charge (if so equipped) connector are connected at the same time. The normal charge connector and the quick charg[...]

Symptom Possible cause Possible solution Charging timer cannot be performed. The charge cable is not connected. Connect the charge cable. The time on the clock is wrong. The charging timer function does not start charging based on the clock located on the upper dis- play. Confirm that the date and time shown on the charging timer screen are the sam[...]

Symptom Possible cause Possible solution Normal charge stops in the middle of charging. There is no power coming from the outlet. There may have been a electrical power failure, or the breaker may have failed. Charging will resume when the power source is reset. The charge cable has been disconnected. Check that the charge cable has not been discon[...]

1 Safety–Seats, seat belts and supplemental restraint system Seats ............................. .1-2 Front seats ........................ .1-3 Rear seats ........................ .1-4 Head restraints/headrests ................. .1-5 Adjustable head restraint/headrest components . . .1-6 Non-adjustable head restraint/headrest components .........[...]

WARNING • Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. • For the most effective protecti[...]

FRONT SEA TS Front manual seat adjustment Y our vehicle seats can be adjusted manually . For additional information about adjusting the seats, refer to the steps outlined in this section. Forward and backward: Pull the bar up and hold it while sliding the seat forward or backward to the preferred position. Release the bar to lock the seat in positi[...]

REAR SEA TS Folding Before folding the rear seats: • Secure the seat belts on the seat belt hooks located on the side wall. For additional informa- tion, refer to “Seat belt hooks” in this section. T o fold down the seatback, pull the release knob. T o return the seatback to the seating position, lift up each seatback and push it to the uprig[...]

WARNING Head restraints/headrests supplement the other vehicle safety systems. They may provide additional protection against injury in certain rear end colli- sions. Adjustable head restraints/ headrests must be adjusted properly, as specified in this section. Check the ad- justment after someone else uses the seat. Do not attach anything to the h[...]

ADJUST ABLE HEAD RESTRAINT/ HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Multiple notches 3. Lock knob 4. Stalks NON-ADJUST ABLE HEAD RESTRAINT/HEADREST COMPONENTS 1. Removable head restraint/headrest 2. Single notch 3. Lock knob 4. Stalks REMOVE Use the following procedure to remove the head restraint/headrest. 1. Pull the head rest[...]

INST ALL 1. Align the head restraint/headrest stalks with the holes in the seat. Make sure the head restraint/headrest is facing the correct direc- tion. The stalk with the notch (notches) 䊊 1 must be installed in the hole with the lock knob 䊊 2 . 2. Push and hold the lock knob and push the head restraint/headrest down. 3. Properly adjust the h[...]

Raise T o raise the head restraint/headrest, pull it up. Make sure the head restraint/headrest is posi- tioned so the lock knob is engaged in the notch before riding in that designated seating position. Lower T o lower, push and hold the lock knob and push the head restraint/headrest down Make sure the head restraint/headrest is posi- tioned so the[...]

Safety–Seats, seat belts and supplemental restraint system 1-9[...]

WARNING • Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be in the rear seats and in an appropriate restraint. • The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system and increase the chance or severity of inj[...]

SEA T BEL T W ARNING LIGHT Both the driver’s and passenger’s front seats are equipped with a seat belt warning light. The warning light, located on the instrument panel, will show the status of the driver and passenger seat belt. NO TE: The front passenger seat belt warning light will not light up if the seat is not occupied. For additional inf[...]

Fastening the seat belts 1. Adjust the seat. For additional information, refer to “Seats” in this section. 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. • The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the be[...]

The ALR mode should be used only for child restraint installation. During normal seat belt use by an occupant, the ALR mode should not be activated. If it is activated, it may cause uncomfortable seat belt ten- sion. It can also change the operation of the front passenger air bag. For additional information, refer to “Front passenger air bag and [...]

Center of rear seat Selecting correct set of seat belts: The center seat belt buckle is identified by the CENTER mark 䊊 A . The center seat belt tongue can be fastened only into the center seat belt buckle. Shoulder belt height adjustment (front seats) The shoulder belt anchor height should be ad- justed to the position that is best for you. For [...]

Seat belt hooks When the rear seat belts are not in use and when folding down the rear seats, hook the rear outer seat belts on the seat belt hooks. SEA T BEL T EXTENDERS If, because of body size or driving position, it is not possible to properly fit the lap/shoulder belt and fasten it, an extender that is compatible with the installed seat belts [...]

WARNING Do not allow children to play with the seat belts. Most seating positions are equipped with Automatic Locking Retrac- tor (ALR) mode seat belts. If the seat belt becomes wrapped around a child’s neck with the ALR mode activated, the child can be seriously injured or killed if the seat belt retracts and becomes tight. This can occur even i[...]

INF ANTS Infants up to at least 1 year old should be placed in a rear-facing child restraint. NISSAN recom- mends that infants be placed in child restraints that comply with Federal Motor V ehicle Safety Standards or Canadian Motor V ehicle Safety Standards. Y ou should choose a child restraint that fits your vehicle and always follow the manu- fac[...]

If you answered no to any of these questions, the child should remain in a booster seat using a three-point type seat belt. NO TE: Laws in some communities may follow dif- ferent guidelines. Check local and state regulations to confirm your child is using the correct restraint system before traveling. WARNING Never let a child stand or kneel on any[...]

– The child restraint must be used and installed properly. Always follow all of the child restraint manufacturer’s instructions for installation and use. – Infants and children should never be held on anyone’s lap. Even the strongest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another pa[...]

Several manufacturers offer child restraints for infants and small children of various sizes. When selecting any child restraint, keep the following points in mind: • Choose only a restraint with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V e- hicle Safety Standard 213. • Check the chil[...]

seat belt (not the lower anchors) to install the child restraint. Be sure to follow the child restraint manufacturer’s instructions for installation. The LA T CH lower anchor points are provided to install child restraints in the rear outboard seating positions only . Do not attempt to install a child restraint in the center position using the LA[...]

Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle. With this sys- tem, you do not have to use a vehicle seat belt to secure the child restraint. Check your child re-[...]

• Child restraint anchorages are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used to attach adult seat belts, or other items or equipment to the vehicle. Doing so could damage the child restraint anchorages. The child restraint will not be properly in- stalled usin[...]

2. Secure the child restraint anchor attachments to the LA T CH lower anchors. Check to make sure that the LA T CH attachment is properly attached to the lower anchors. 3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward and rearward firmly in the center[...]

4. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the seat near the LA TCH attach- ment path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the LA T CH attachment holds the restraint in place. If the[...]

Follow these steps to install a rear-facing child restraint using the vehicle seat belt in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and there- fore must not be used in the front seat. P osition the child restraint on the seat. Always follow the child restraint manufacturer’s instructions. 2. Route [...]

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the child restraint. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the c[...]

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH For additional informat[...]

If the seating position does not have an adjust- able head restraint/headrest and it is interfer- ing with the proper child restraint fit, try an- other seating position or a different child restraint. 4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attachments. Press downward [...]

7. Check to make sure the child restraint is prop- erly secured prior to each use. If the child restraint is loose, repeat steps 1 through 6. Installing top tether strap 䊊 1 T op tether strap 䊊 2 T ether anchor point The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments. [...]

CENTER SEA TING POSITION 1. Position the top tether strap 䊊 1 over the seatback. 2. Secure the tether strap to the tether anchor point 䊊 2 on the bottom of the seatback be- hind the child restraint. 3. Tighten the tether strap according to the manufacturer’s instructions to remove any slack. If you have any questions when installing a top tet[...]

Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seat or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be placed in the forward-facing direction only. Move the seat to the rearmost position. Child re- straints for infants must be used in the r[...]

5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 6. Remove any additional slack from the seat belt. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 7. Tighten the tether strap ac[...]

9. Check to make sure the child restraint is prop- erly secured prior to each use. If the seat belt is not locked, repeat steps 2 through 8. 10. If the child restraint is installed on the front passenger seat, push the power switch to the ON position. The front passenger air bag status light should illuminate. If this light does not illuminate, ref[...]

Rear bench seat OUTBOARD SEA TING POSITIONS 1. Remove the head restraint/headrest and store it in a secure place. Be sure to reinstall the head restraint/headrest when the child restraint is removed. For additional infor- mation about head restraint/headrest adjustment, removal and installation, refer to “Head restraints/headrests ⴖ in this sec[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: • Choose only a booster seat with a label certify- ing that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V e- hicle Safety Standard 213. • Check the booster seat in your vehicl[...]

Booster seat installation WARNING T o avoid injury to a child, do not use the lap/shoulder belt Automatic Locking Re- tractor (ALR) mode when using a booster seat with the seat belts. For additional information, refer to all W arnings and Cautions in “Child safety”, “Child restraints” and “Booster seats” sections of this manual be- fore[...]

If the seating position does not have an adjust- able head restraint/headrest and it is interfer- ing with the proper booster seat fit, try another seating position or a different booster seat. 4. Position the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s instructions for adjust[...]

Roof-mounted curtain side-impact supple- mental air bag system This system can help cushion the impact force to the head of occupants in front and rear outboard seating positions in certain side impact collisions. In a side impact, the curtain air bags are designed to inflate on the side where the vehicle is im- pacted. The SRS is designed to suppl[...]

WARNING • The front air bags ordinarily will not in- flate in the event of a side impact, rear impact, rollover or lower severity frontal collision. Always wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents. • The front passenger air bag will not inflate if the passenger air bag status light is lit [...]

WARNING • Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations. • Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if they are n[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted cur- tain side-impact supplemental air bags: • The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, rollover or lower severity side collision. Always wear your seat belts to help reduce the risk or severity [...]

• The seat belts, the side air bags and curtain air bags are most effective when you are sitting well back and upright in the seat. The side air bag and curtain air bag inflate with great force. Do not allow anyone to place their hand, leg or face near the side air bag on the side of the seatback of the front seat or near the side roof rails. Do [...]

NISSAN ADV ANCED AIR BAG S Y STEM (FRONT SEA TS) WARNING T o ensure proper operation of the front passenger’s NISSAN Advanced Air Bag System, please observe the following items. • Do not allow a passenger in the rear seat to push or pull on the seatback pocket. • Do not place heavy loads heavier than 9 lb (4 kg) on the seatback, head restrain[...]

the crash severity. Additionally , the front passen- ger air bag may be automatically turned OFF under some conditions, depending on the weight detected on the passenger seat and how the seat belt is used. If the front passenger air bag is OFF , the passenger air bag status light will be illumi- nated (if the seat is unoccupied, the light will not [...]

Front passenger air bag status light Status light The front passenger seat is equipped with an occupant classification sensor (weight sensor) that turns the front passenger air bag on or off depending on the weight applied to the front passenger seat. The status of the front passen- ger air bag (ON or OFF) is indicated by the front passenger air ba[...]

passenger air bag to be automatically turned OFF . For small adults it may be turned OFF , however if the occupant takes his/her weight off the seat cushion (for example, by not sitting up- right, by sitting on an edge of the seat, or by otherwise being out of position) , this could cause the sensors to turn the air bag OFF . Always be sure to be s[...]

If a malfunction occurs in the front passenger air bag system, the supplemental air bag warning light , located in the meter and gauges area of the instrument panel, will blink. Have the sys- tem checked by a NISSAN certified LEAF dealer. Normal operation In order for the occupant classification sensor system to classify the front passenger based o[...]

NO TE: A system check will be performed during which the front passenger air bag status light will remain lit for about 7 seconds initially. If the light is ON after this, the vehicle should be checked by a NISSAN certified LEAF dealer as soon as possible. 2. If the light is ON with an adult occupying the front passenger seat: • Occupant is a sma[...]

the above conditions. Restart the vehicle and wait 1 minute. NO TE: A system check will be performed during which the front passenger air bag status light will remain lit for about 7 seconds initially. If the light is still OFF after this, the small adult, child or child restraint should be repositioned in the rear seat and the vehicle should be ch[...]

• No unauthorized changes should be made to any components or wiring of the seat belt system. This may affect the front air bag system. T ampering with the seat belt system may result in serious personal injury. • Work on and around the front air bag system should be done by a NISSAN certified LEAF dealer. Installation of electrical equipment s[...]

The seat belts should be correctly worn and the driver and passenger seated upright as far as practical away from the side air bags. Rear seat passengers should be seated as far away as practical from the door finishers and side roof rails. The side air bags and curtain air bags inflate quickly in order to help protect the occupants in the outboard[...]

SEA T BEL T WITH PRETENSIONER(S) (FRONT SEA TS) WARNING • The pretensioner(s) cannot be reused after activation. They must be replaced together with the retractor and buckle as a unit. • If the vehicle becomes involved in a collision but pretensioner(s) are not activated, be sure to have the preten- sioner system checked and, if neces- sary, re[...]

SUPPLEMENT AL AIR BAG W ARNING LABELS A . Supplemental front-impact air bag system warning labels SRS air bag warning labels The warning labels are located on the surface of the sun visors. SUPPLEMENT AL AIR BAG W ARNING LIGHT The supplemental air bag warning light, display- ing in the instrument panel, monitors the circuits of the Air bag Control [...]

WARNING If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag and/or pre- tensioner systems will not operate in an accident. T o help avoid injury to yourself or others, have your vehicle checked by a NISSAN certified LEAF dealer as soon as possible. Repair and replacement procedure The[...]

NO TES 1-56 Safety–Seats, seat belts and supplemental restraint system[...]

2 Instruments and controls Cockpit ............................ .2-3 Instrument panel ....................... .2-4 Meters and gauges ..................... .2-5 Speedometer and odometer .............. .2-6 Li-ion battery temperature gauge ........... .2-6 P ower meter ....................... .2-7 Driving range ....................... .2-8 Li-ion bat[...]

Seatback Pocket (if so equipped) .......... .2-52 Sunglasses holder ................... .2-52 Glove box ........................ .2-53 Console box ...................... .2-53 T onneau cover (if so equipped) ........... .2-53 Stowing golf bags ................... .2-55 Windows .......................... .2-55 P ower windows .................... .2-[...]

1. TRIP switch for twin trip odometer (P . 2-5) 2. T rip computer switch (P . 2-22) 3. Instrument brightness control switch (P . 2-41) 4. Headlight, fog light and turn signal switch — Headlight (P . 2-42) — T urn signal light (P . 2-42) — Fog light (if so equipped) (P . 2-45) 5. Steering-wheel-mounted controls (left side) — Audio control (P[...]

1. Side vents (P . 4-22) 2. Meters and gauges (P . 2-5) 3. Center multi-function control panel — Navigation system (Refer to LEAF Naviga- tion System Owner’s Manual) — Without navigation system (P . 4-38) 4. Hazard warning flasher switch (P . 6-2) 5. Center vents (P . 4-21) 6. Rear window defroster switch (P . 2-41) 7. Front passenger supplem[...]

This vehicle is equipped with an upper display and a lower display. 1. Master warning lights (P . 2-18) 2. ECO indicator (P . 2-10) 3. Speedometer (P . 2-6) 4. Clock (P . 2-11) 5. Outside air temperature (P . 2-10) 6. T urn signal/Hazard indicator light (P . 2-21) 7. Li-ion battery capacity level gauge (P . 2-10) 8. Li-ion battery available charge [...]

SPEEDOMETER AND ODOMETER The vehicle is equipped with a speedometer and odometer. The speedometer is located on the top of the meter cluster. The odometer is located within the vehicle information display . Speedometer Odometer/twin trip odometer The odometer 䊊 1 and twin trip odometer 䊊 2 are displayed on the vehicle information display when t[...]

NO TE: • If the display indicates that the tempera- ture of the Li-ion battery is near the red zone end of the normal range, reduce ve- hicle speed to decrease the temperature. If the indicator is over the normal range, the power provided to the traction motor is reduced when the power limitation in- dicator light is illuminated. Therefore, the v[...]

The Power meter also indicates if the power provided to the motor is limited or if regenerative braking is limited. When power or regenerative braking is limited, the circles on the display change from a double circle to a single circle 䊊 2 . Regenerative braking is automatically reduced when the Li-ion battery is fully charged to prevent the Li-[...]

LI-ION BA TTERY AV AILABLE CHARGE GAUGE The gauge 䊊 1 indicates the approximate avail- able Li-ion battery charge to run the vehicle. Charge the Li-ion battery before the display reaches the bottom line. The low battery charge warning light illu- minates when the Li-ion battery available charge gauge is getting low . Charge as soon as it is conve[...]

LI-ION BA TTERY CAPACITY LEVEL GAUGE This gauge indicates the amount of charge the Li-ion battery is capable of storing. When the capacity of the Li-ion battery de- creases with age and usage, the level of the gauge will also decrease. OUTSIDE AIR TEMPERA TURE The outside air temperature is displayed in °F or °C. The display may differ from the a[...]

• Time the vehicle is not moving while the vehicle is in the READ Y to drive mode and accessories are on. Instant ECO driving level The instant ECO driving level 䊊 1 is displayed by the number of bars that increase (more economi- cal driving) or decrease (less economical driving) depending on vehicle operation. Long term ECO driving level Long [...]

12-volt battery charge warning light Low battery charge warning light Front passenger air bag status light or Anti-lock Braking System (ABS) warning light Low tire pressure warning light High beam indicator light (blue) Approaching Vehicle Sound for Pedestrians (VSP) system warning light Master warning light (red/yellow) Plug-in indicator light BRA[...]

Headlight warning light Exterior light indicator light T urn signal/hazard indicator lights Front fog light indicator light (if so equipped) V ehicle Dynamic Control (VDC) OFF indicator light CHECKING LIGHTS With all doors closed, apply the parking brake, fasten the seat belts and place the power switch for Leaf to the ON position without starting [...]

• The DC/DC converter system may not be functioning properly if the 12-volt warning light illuminates continuously when the power switch is in the READY to drive position. Do not charge the 12-volt battery while this warning light is illuminated. It may lead to a mal- function of the DC/DC converter sys- tem. Contact a NISSAN certified LEAF deale[...]

cooperative regenerative brake and/or the elec- tronically driven intelligent brake systems are not functioning properly. Have the system checked by a NISSAN certified LEAF dealer. If the BRAKE warning light (red) also illuminates, stop the ve- hicle immediately and contact a NISSAN certified LEAF dealer. For additional information, refer to- “Br[...]

• Pressing the brake pedal when the power switch position is not in the ON or READ Y to drive position and/or low brake fluid level may increase the stopping distance and braking will re- quire greater pedal effort as well as pedal travel. • If the brake fluid level is below the minimum or MIN mark on the brake fluid reservoir, do not drive unt[...]

When the low tire pressure warning light illuminates, you should stop and adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Load- ing Information label. The low tire pressure warning light does not automatically turn off when the tire pressure is adjusted. After the tire is inflated to the recommended pressure, th[...]

• Since the spare tire is not equipped with the TPMS, when a wheel is re- placed, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Contact a NISSAN certified LEAF dealer as soon as possible for tire re- placement and/or system resetting. • Replacin[...]

For additional information, refer to “Seat belts” in the “Safety — Seats seat belts and supplemental restraint system” section of this manual for pre- cautions on seat belt usage. Supplemental air bag warning light After turning the power switch to the ON posi- tion, the supplemental air bag warning light will illuminate. The supplemental[...]

Plug-in indicator light This light illuminates when the charge connector is connected to the vehicle and blinks during charging. NO TE: If the charge connector is connected to the vehicle, the power switch can not be placed in the READ Y to drive position. P ower limitation indicator light When the power limitation indicator light is illu- minated,[...]

If the security system is malfunctioning, this light will remain on while the power switch is in the ON position. For additional information, refer to “Se- curity systems” in this section. Slip indicator light This indicator will blink when the VDC system or the traction control system is operating, thus alerting that the vehicle is nearing its[...]

P ower switch reminder chime The power switch reminder chime will sound when the driver’s door is opened while the power switch is in the ON or READ Y to drive position. Push the power switch to the OFF position. Seat belt warning chime The seat belt warning chime will sound for about 6 seconds unless the driver’s seat belt is securely fastened[...]

INDICA T ORS FOR OPERA TION 1. READ Y to drive position operation indicator This indicator appears while the vehicle is in the P (Park) position. This indicator means that the EV system will start when the power switch is pressed with the brake pedal depressed. 2. K ey is not detected warning This warning appears in either of the following conditio[...]

4. EV system operation for discharged Intelligent K ey® system indicator This indicator appears when the Intelligent Key battery is running out of power and when the Intelligent Key system and vehicle are not com- municating normally. If this indicator appears, touch the power switch with the Intelligent K ey while depressing the brake pedal. For [...]

12. Remove charge connector warning This warning appears when the power switch is in the ACC or ON position and if the power switch is pushed to the READ Y to drive position with the brake pedal depressed, while the charge connector is inserted to the vehicle. Remove the charge connector. 13. Electric shift control system warning This message appea[...]

19. Apply parking brake warning This warning appears if the DC/DC converter system is not functioning properly after the “Stop the vehicle” message above. If this warning ap- pears on the display, stop the vehicle in a safe location and push the P (Park) position switch on the shift lever. If the parking brake is applied, the display turns off.[...]

TRIP COMPUTER Switches for the trip computer are located on the left side of the combination meter panel. T o op- erate the trip computer, push the following switches: 䊊 A switch 䊊 B switch When the power switch is pushed to the ON position, modes of the trip computer can be selected by pushing the switch 䊊 A . Each time the switch 䊊 A is p[...]

NO TE: • Immediately after charging has finished, the charge time will be displayed as “--:--” . • The estimated charging time stops updat- ing if the air conditioner is turned on while the Li-ion battery is charging. The esti- mated charging time updates approxi- mately 15 minutes after the air condi- tioner is turned off. • The 6 kW and[...]

[...]

Settings Settings cannot be accessed while driving. The message, “Settings can only be ac- cessed when stationary” is also displayed on the vehicle information display. The switch 䊊 A and switch 䊊 B are used in the settings mode. Push the switch 䊊 B to scroll through the menus. Push the switch 䊊 A to select a menu. Skip: Push the switch[...]

• Outside temp Select this submenu to display the low outside temperature (On or Off) . Units: Units displayed can be set for the following items on this menu. • Back Select this submenu to return to the top page of the settings mode. • T emperature • Speed Language: Select this submenu to choose the language displayed. T o return to the to[...]

W ARNING INFORMA TION DISPLA Y S Low battery warning When the low battery charge warning light and the master warning light (yellow) illu- minate, the system displays a message on the navigation screen that warns the driver that the Li-ion battery power level is low. 1. The notification is displayed on the upper left side of the ST A TUS screen. T [...]

NO TE: • The low battery warning can be set to off. Refer to LEAF Electric Vehicle Information System Owner’s Manual. • When the battery power level is low, the system automatically obtains charging station information. Limited power warning When the Li-ion battery power level is extremely low or the Li-ion battery malfunctions, the power lim[...]

INDICA T ORS FOR MAINTENANCE 1. Tire replacement indicator This indicator appears when the customer set distance comes for replacing tires. Y ou can set or reset the distance for replacing tires. For addi- tional information, refer to “T rip computer” in this section. WARNING The tire replacement indicator is not a substitute for regular tire c[...]

INDICA T OR FOR TIMER When the power switch is turned off, this display appears for 10 seconds. If the switch is pushed within 10 seconds, the display can be selected and each setting information display can be confirmed. 1. Timer setting status (charging and Climate Ctrl.) and charge connector lock setting status The timer setting status (ON or OF[...]

VEHICLE SECURITY S Y STEM The vehicle security system provides visual and audio alarm signals if someone opens the doors, or rear hatch when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. The system helps deter vehicle theft but cannot prevent it, nor can it[...]

• The alarm automatically turns off after approxi- mately 50 seconds. However, the alarm reacti- vates if the vehicle is tampered with again. The alarm is activated by: • Unlocking the door without using the Intelligent K ey , the request switch or the key. (Even if the door is opened by releasing the door inside lock knob, the alarm will activ[...]

Security Indicator Light The security indicator light is located on the me- ter panel. It indicates the status of the NISSAN V ehicle Immobilizer System. The light blinks after the power switch was in the ACC or OFF position. This function indicates the security systems equipped on the vehicle are operational. If the NISSAN Vehicle Immobilizer Syst[...]

• Pre-mix windshield-washer fluid con- centrates with water to the manufac- turer’s recommended levels before pouring the fluid into the windshield- washer fluid reservoir. Do not use the windshield-washer fluid reservoir to mix the windshield-washer fluid con- centrate and water. If the windshield wiper operation is inter- rupted by snow or ic[...]

REAR WIPER OPERA TION WARNING In freezing temperatures the windshield- washer fluid may freeze on the rear win- dow glass and obscure your vision. Warm the rear window with the defroster before you wash the rear window. CAUTION • Do not operate the washer continu- ously for more than 30 seconds. • Do not operate the washer if the windshield-was[...]

T o defrost the rear window glass and outside mirrors, place the power switch in the ON posi- tion and push the switch 䊊 1 on. The indicator light will illuminate. Push the switch again to turn the defroster off. It will automatically turn off in approximately 15 minutes. CAUTION When cleaning the inner side of the rear window, be careful not to [...]

If the switch 䊊 1 is pushed again, the instrument lights are turned on to the lowest brightness setting. HEADLIGHT SWIT CH Lighting 䊊 1 Rotate the switch to the position, the front parking, tail, license plate, and instru- ment panel lights come on. 䊊 2 Rotate the switch to the position, the headlights come on and all the other lights remain [...]

The autolight system can turn on the headlights automatically when it is dark and turn off the headlights when it is light. For US models: The headlights will also be turned on automatically at twilight or in rainy weather (when the windshield wiper is operated continu- ously) . If the power switch is placed in the OFF position and one of the doors[...]

Battery saver system • When the headlight switch is in the or position while the power switch is in the ON position, the lights will automatically turn off 45 seconds after the power switch has been placed in the OFF position. • When the headlight switch remains in the or position after the lights automatically turn off, the lights will turn on[...]

Move the lever up or down until the turn signal begins to flash, but the lever does not latch, and release the lever. The turn signal will automati- cally flash three times. Choose the appropriate method to signal a lane change based on road and traffic conditions. T o turn the fog lights on, rotate the headlight switch to the position, then rotate[...]

If the surface temperature of the steering wheel is below approximately 68°F (20°C) , the system will heat the steering wheel and cycle off and on to maintain a temperature above 68°F (20°C) . The indi- cator light will remain on as long as the system is on. Push the switch again to turn the heated steering wheel system off manually. The indica[...]

T o activate the ECO mode, push the ECO switch 䊊 1 on the right side of the steering wheel. The “ECO indicator” on the instrument cluster will illuminate. T o deactivate the ECO mode, push the ECO switch 䊊 1 again. The “ECO indicator” on the instrument cluster will go out. For additional information, refer to “Electric Shift Control S[...]

The heater is controlled by a thermostat, auto- matically turning the heater on and off. The indi- cator light will remain on as long as the switch is on. When the vehicle’s interior is warmed, or before you leave the vehicle, be sure to turn the switch off. NO TE: The heated seats consume less power than the heater and can be used to either help[...]

Push the VDC OFF switch again to turn on the VDC system, or the VDC is automatically turned back on when the power switch is placed in the OFF position and then placed back in the READ Y to drive position. For additional information, refer to “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” section of this manual. T o op[...]

T o turn off the charge timer, push the charge timer OFF switch. For additional information, re- fer to “Charging timer” in the “Charging” section of this manual. The power outlet is located in the instrument panel. CAUTION • The outlet and plug may be hot during or immediately after use. • Do not use with accessories that ex- ceed a 12[...]

CUP HOLDERS CAUTION • Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. • Use only soft cups in the cup holder. Hard objects can injure you in an accident. CAUTION • Do not use the bottle holder for any other objects that could be thrown[...]

SEA TBACK POCKET (IF SO EQUIPPED) The seatback pocket is located on the back of the passenger’s seat. The pocket can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to avoid obstructing the driver’s[...]

GL OVE BOX T o open the glove box, pull the handle. T o close, push the lid in until it latches. WARNING Keep the glove box lid closed while driv- ing to prevent injury in case of an acci- dent or a sudden stop. CONSOLE BO X T o open the console box, pull up the lever 䊊 A and pull up the lid. T o close, push the lid down until it is latched. T ON[...]

– If the tonneau cover contacts the top tether strap when it is attached to the top tether anchor, remove the tonneau cover from the vehicle or secure it on the cargo floor below its attachment location. If the tonneau cover is not removed, it may damage the top tether strap during a colli- sion. – Do not allow cargo to contact the top tether s[...]

ST OWING GOLF BAGS Normally , two standard golf bags can be stowed in the cargo area. Insert the top of the golf bag into the right side of the cargo area 䊊 1 then rotate the bag backward 䊊 2 . Insert the top of the sec- ond golf bag into right side of the cargo area 䊊 3 and stow the bottom of golf bag forward all the way 䊊 4 . In some case[...]

Main power window switch (driver’s side) 1. Driver side window 2. Front passenger side window 3. Rear left passenger side window 4. Rear right passenger side window 5. Window lock button T o open or close a window , push down 䊊 A or pull up 䊊 B the corresponding switch and hold it. The main switches, on the driver’s side, will open or close[...]

Automatic operation The automatic operation is available for the switch that has an mark on its surface. T o fully open or close the window , completely push down or pull up the switch and release it; the switch need not be held. The window will automatically open or close all the way. T o stop the window , just push or lift the switch in the oppos[...]

CAUTION Do not use for extended periods of time with the power switch in the OFF posi- tion. This could result in a discharged 12-volt battery. MAP LIGHTS Press the button to turn the map lights on. T o turn them off, press the button again. ROOM LIGHT The room light switch has three positions: ON, DOOR and OFF . ON position When the switch is in t[...]

DOOR position When the switch is in the DOOR position 䊊 2 , the ceiling light will illuminate under the following conditions: • the power switch is placed in the LOCK position – remains on for about 15 seconds. • doors are unlocked by pushing the UNL OCK button or the request switch, with the power switch in the L OCK position – remains o[...]

WARNING • Do not use the HomeLink® Universal T ransceiver with any garage door opener that lacks safety stop and re- verse features as required by federal safety standards. (These standards be- came effective for opener models manufactured after April 1, 1982.) A garage door opener that cannot detect an object in the path of a closing ga- rage d[...]

[...]

stop transmitting. Continue to press and hold the desired HomeLink® button while you press and re-press (“cycle”) your hand-held transmitter every two seconds until the fre- quency signal has been learned. The HomeLink® indicator light will flash slowly and then rapidly after several seconds upon successful training. DO NOT release until the [...]

REPROGRAMMING A SINGLE HOMELINK® BUTT ON T o reprogram a HomeLink® Universal T rans- ceiver button, complete the following: 1. Press and hold the desired HomeLink® but- ton. DO NOT release the button. 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink® button, proceed with “Programming HomeLink®” - [...]

NO TES 2-64 Instruments and controls[...]

3 Pre-driving checks and adjustments K e y s .............................. .3-2 NISSAN Intelligent K ey® ............... .3-2 NISSAN Vehicle Immobilizer System keys ...... .3-3 Doors ............................. .3-4 Locking with mechanical key (driver’s side only) . . .3-4 Locking with inside lock knob ............. .3-5 Locking with power do[...]

A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet) , not in the vehicle. If you lose your keys, see a NISSAN certified LEAF dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate. A key nu[...]

• Do not place the Intelligent Key near an electric appliance such as a televi- sion set, personal computer or cellular phone. • Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function. If an Intelligent Key is lost or stolen, NISSAN recommend[...]

LEAF dealer for registration. This is because the registration process will erase the memory of all key codes previously registered into the NISSAN V ehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Any key that is not given to [...]

• T urning the driver’s door key cylinder, once to- wards the rear of the vehicle 䊊 2 , will unlock the driver’s door. After returning the key to the neu- tral position, turning it towards the rear again within five seconds will unlock all doors and the rear hatch. • For models equipped with navigation, you can switch the lock system to t[...]

Lockout protection When the power door lock switch is moved to the lock position while any door is open, all doors will unlock automatically and a chime will sound after the door is closed. This function help to prevent the Intelligent Key from being accidentally locked inside the vehicle. AUT OMA TIC DOOR L OCKS • All doors lock automatically wh[...]

CAUTION • Be sure to carry the Intelligent Key with you when operating the vehicle. • Never leave the Intelligent Key in the vehicle when you leave the vehicle. The Intelligent K ey is always communicating with the vehicle because it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interf[...]

If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelli- gent Key from the vehicle. This may prevent the unauthorized use of the Intelligent K ey to operate the vehicle. For additional information, contact a NISSAN certified LEAF dealer. The Intelligent Key function can be disabled. For additional information,[...]

DOOR L OCKS/UNL OCKS PRECAUTION • Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelligent K ey is outside the vehicle. • After locking with the door handle request switch, [...]

Y ou can lock or unlock the doors without taking the key out from your pocket or bag. When you carry the Intelligent K ey with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passen- ger’s) 䊊 A or rear hatch request switch 䊊 B within the range of operation. When you lock or unlock the doors[...]

All doors will be locked automatically unless one of the following operations is performed within one minute after pushing the request switch while the doors are locked. • Opening any door. • Pushing the power switch. During this one minute time period, if the UN- L OCK button on the Intelligent K ey is pressed, all doors will be locked automat[...]

TROUBLESHOO TING GUIDE V erify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible cause Action to take When opening the driver’s door to get out of the vehicle The inside warning chime so[...]

HOW T O USE REMO TE KEYLESS ENTR Y FUNCTION WARNING • Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manu- facturer for the possible influences be- fore use. • The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the ra[...]

Locking doors 䊊 1 L OCK button 䊊 2 UNL OCK button 䊊 3 CHARGE PORT UNL OCK 䊊 4 P ANIC button When you lock or unlock the doors, the hazard indicator will flash and the horn will sound as a confirmation. For additional information, refer to “Hazard warning flasher switch” in the “In case of emergency” section and “Horn” in the “[...]

Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the P ANIC button 䊊 4 on the Intelligent K ey for more than 1 second. 2. The theft warning alarm and headlights will stay on for a period of time. 3. The panic alarm stops when: • It has run for a period of time, [...]

Hazard indicator and horn mode: Operation DOOR LOCK DOOR UNLOCK Pushing door handle request switch or rear hatch request switch HAZARD - twice OUTSIDE CHIME - twice HAZARD - once OUTSIDE CHIME - once Pressing or button HAZARD - twice HORN - once HAZARD - once HORN - none Hazard indicator mode: Operation DOOR LOCK DOOR UNLOCK Pushing door handle req[...]

WARNING • Make sure that the hood is completely closed and latched before driving. Fail- ure to do so could cause the hood to open during driving and result in an accident. • If steam or smoke is emitting from the motor compartment, do not open the hood. Doing so could cause an injury. When opening the hood: 1. Securely close the charge port do[...]

WARNING • Always make sure that the rear hatch has been closed securely to prevent it from opening while driving. • Do not drive with the rear hatch open. • Make sure that all passengers have their hands, etc . inside the vehicle be- fore closing the rear hatch. T o open the rear hatch, unlock it and push the rear hatch opener switch 䊊 A . [...]

SECONDAR Y REAR HA T CH RELEASE The secondary rear hatch release mechanism allows the rear hatch to be opened in the event of a discharged battery , etc. Push the lever to the right to open the rear hatch with a suitable tool. If you had to open the rear hatch using this lever, have the vehicle checked by a NISSAN certified LEAF dealer as soon as p[...]

When opening the charge port lid perform one of the following: • Push the charge port lid opener switch located on the instrument panel, or • Press and hold the charge port lid unlock button on the Intelligent Key for more than one second. When opening the charge port lid: 1. The charging status indicator lights flash and a chime sounds three t[...]

CAUTION • When charging is finished, be sure to close the charge port cap. If water or dust gets inside the charge port, this may cause a malfunction. • Pay particular attention when using the normal charge port as the charge port lid can be closed even when the normal charge port cap is open. • Close the quick charge (if so equipped) port ca[...]

䊊 1 T o block out glare from the front, swing down the sun visor. 䊊 2 T o block glare from the side, remove the sun visor from the center mount and swing it to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION • Do not store the sun visor before re- turning the extension to its original position. • Do not pull the e[...]

T o access the card holder, slide card in the card holder. Do not view information while operating the vehicle. INSIDE REARVIEW MIRROR Adjust the angle of the inside rearview mirror to the preferred position. AUT OMA TIC ANTI-GLARE TYPE (IF SO EQUIPPED) T ype A (if so equipped) T ype B (if so equipped) CARD HOLDER (DRIVER’S SIDE ONL Y) MIRRORS Pr[...]

The inside mirror is designed so that it automati- cally changes reflection based on the intensity of the headlights of the vehicle behind. When the system is turned on, the indicator light 䊊 A will illuminate and excessive glare from the headlights of the vehicle behind you will be re- duced. T ype A (if so equipped): The anti-glare system autom[...]

The outside mirror control switch is located on the armrest. The outside mirror will operate only when the power switch is in the ACC or ON position. T urn the switch right or left to select the right or left side mirror 䊊 1 , then adjust the mirror using the control switch 䊊 2 . Defrosting outside mirrors (if so equipped) The outside mirrors w[...]

NO TES 3-26 Pre-driving checks and adjustments[...]

4 Display screen, heater, air conditioner, audio and phone systems RearView Monitor (if so equipped) ............ .4-3 RearView Monitor system operation ......... .4-4 How to read the displayed lines ............ .4-5 Difference between predicted and actual distances ......................... .4-5 How to park with predicted course lines (models wit[...]

CD Care and cleaning ................ .4-56 Steering wheel switch for audio control ...... .4-56 Antenna ......................... .4-57 NissanConnect sm Mobile Apps (models without navigation system) ......... .4-57 Car phone or CB radio ................ .4-58 Bluetooth® hands-free phone system without navigation system (if so equipped) .........[...]

1. CAMERA button (if so equipped) REARVIEW MONITOR (IF SO EQUIPPED) Display screen, heater, air conditioner, audio and phone systems 4-3[...]

WARNING Failure to follow the warnings and in- structions for proper use of the RearView Monitor system could result in serious injury or death. • RearView Monitor is a convenience fea- ture and is not a substitute for proper backing. Always turn and look out the windows and check mirrors to be sure that it is safe to move before operating the ve[...]

HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line 䊊 A are displayed on the monitor. Distance guide lines Indicate distances from the vehicle body. • Red line 䊊 1 : approx. 1.5 ft (0.5 m) • Y ellow line 䊊 2 : approx. 3 ft (1 m ) • Green line ?[...]

Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. Note that any object on the hill is closer than it appears on the monitor. Backing up near a projecting object The predicted course lines (models with naviga- tion) 䊊 A do n[...]

HOW T O P ARK WITH PREDICTED COURSE LINES (MODELS WITH NA VIGA TION) WARNING • If the tires are replaced with different sized tires, the predicted course lines may be displayed incorrectly. • On a snow-covered or slippery road, there may be a difference between the predicted course line and the actual course line. • If the battery is disconne[...]

3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines. 5. When the vehicle is parked in the space com- pletely , [...]

Models with navigation 1. While on a RearView Monitor screen, touch the touch-screen display. The Camera Set- ting screen will come up. 2. T ouch the Display Settings key. 3. T ouch the “Brightness,” “Contrast,” “Tint,” “Color,” or “Black Level” key. 4. Adjust the item by touching the + or - key on the touch-screen display . HOW[...]

• When washing the vehicle with high pressure water, be sure not to spray it around the camera. Otherwise, water may enter the camera unit causing wa- ter condensation on the lens, a mal- function, fire or an electric shock. • Do not strike the camera. It is a preci- sion instrument. Otherwise, it may malfunction or cause damage result- ing in [...]

1. CAMERA button AROUND VIEW® MONITOR (IF SO EQUIPPED) Display screen, heater, air conditioner, audio and phone systems 4-11[...]

WARNING Failure to follow the warnings and in- structions for proper use of the Around View® Monitor system could result in serious injury or death. • The Around View® Monitor is a conve- nience feature and is not a substitute for proper vehicle operation because it has areas where objects cannot be viewed. The four corners of the vehicle in pa[...]

Available views WARNING • The distance guide lines and the ve- hicle width lines should be used as a reference only when the vehicle is on a paved, level surface. The apparent dis- tance viewed on the monitor may be different than the actual distance be- tween the vehicle and displayed ob- jects. • Use the displayed lines and the bird’s eye v[...]

V ehicle width guide lines 䊊 5 : Rear view Indicate the approximate vehicle width when backing up. Predicted course lines 䊊 6 : Indicate the predicted course when operating the vehicle. The predicted course lines will be dis- played on the monitor when the steering wheel is turned. The predicted course lines will move de- pending on how much th[...]

The driver can check the approximate direction and angle of the tire on the display by the tire icon 䊊 3 when driving the vehicle forward or backward. WARNING • Objects in the bird’s-eye view will ap- pear further than the actual distance. • T all objects, such as a curb or vehicle, may be misaligned or not displayed at the seam of the view[...]

Backing up on a steep uphill When backing up the vehicle up a hill, the dis- tance guide lines and the vehicle width guide lines are shown closer than the actual distance. Note that any object on the hill is further than it appears on the monitor. Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and t[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display. However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW T O P ARK WITH PREDI[...]

1. Visually check that the parking space is safe before parking your vehicle. 2. The rear view of the vehicle is displayed on the screen 䊊 A when the shift lever is moved to the R (Reverse) position. 3. Slowly back up the vehicle adjusting the steering wheel so that the predicted course lines 䊊 B enter the parking space 䊊 C . 4. Maneuver the [...]

ADJUSTING THE SCREEN 1. T ouch the touch-screen display with the Around View® Monitor on. 2. T ouch the “Brightness,” “Contrast,” “Tint,” “Color,” or “Black Level” key. 3. Adjust the item by touching the + or — key on the touch-screen display . Note Do not adjust any of the display settings of the Around View® Monitor while [...]

There are some areas where the system will not show objects and the system does not warn of moving objects. When in the front or rear view display , an object below the bumper or on the ground may not be viewed 䊊 1 . When in the bird’s-eye view , a tall object near the seam 䊊 2 of the camera viewing areas will not appear in the monitor. The f[...]

When the “[X]” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding de- vices. This will not hinder normal driving opera- tion but the system should be inspected by a NISSAN certified LEAF dealer if it occurs fre- quently . S Y STEM MAINTENANCE CAUTION • Do not use alcohol, benz[...]

SIDE VENTS Open/close the vents by moving the control to either direction. : This symbol indicates that the vents are closed. Moving the side control to this direction will close the vents. : This symbol indicates that the vents are open. Moving the side control to this direction will open the vents. Adjust the air flow direction of the vents by mo[...]

Note • Odors from inside and outside the vehicle can build up in the air conditioner unit. Odor can enter the passenger compart- ment through the vents. • When parking, set the heater or air condi- tioner controls to turn off air recirculation to allow fresh air into the passenger com- partment. This should help reduce odors inside the vehicle.[...]

DISPLA YING CLIMA TE CONTROL SY STEM ST A TUS SCREEN (MODELS WITH NA VIGA- TION S Y STEM) Press the ST A TUS button to display the climate control system status on the navigation system screen. For additional information, refer to the separate Navigation Owner’s Manual. NO TE: • If the READ Y to drive indicator light is illumi- nated and the EV[...]

• If the charger is connected to the vehicle when it is in the ready to drive mode and the air conditioner or heater is on, the power switch automatically changes to the ON position. The climate control system automatically turns off the heater or air conditioner and switches to the air recirculation mode. Place the power switch in the off positi[...]

AUT OMA TIC CLIMA TE CONTROL (MODELS WITHOUT NA VIGA TION S Y STEM) 1. (fan speed control) dial 2. (intake air control) button 3. (front defroster) button 4. Climate Ctrl. display 5. Rear window and outside mirror (if so equipped) defroster switch 6. T emperature control dial 7. AUT O climate control ON button 8. A/C (air conditioner) button 9. MOD[...]

Note • If the fan speed control button, MODE button, or intake air control button is operated while AUT O is in use, all the other buttons operate in AUT O mode. • While the AUT O indicator is illuminated, electric power consumption of the air con- ditioner can be economized compared to the amount consumed while the AUT O indicator is not illum[...]

Note • The ventilation mode requires a lower power consumption, so cruising distance will increase. • In ventilation mode, temperature is not indicated on the navigation monitor or on the air conditioner display. Dehumidified defrosting/defogging: Press the front defroster button (the indi- cator light will illuminate) . • T o remove moisture[...]

T o turn the system off T o turn off the climate control, press the Climate control system OFF button. The same operating mode (Heater or A/C) that was active when the system is turned off is active when system is turned back on. Climate Ctrl. Timer While the charger is connected to the vehicle, this function pre-heats or pre-cools the passen- ger [...]

3. The “Climate Ctrl. Timer” screen is displayed. T o change the time of day and the day of the week that the climate control timer turns on or off, or to turn the climate control timer on or off, push the switch. 4. T o turn the timer on or off, use the switch to highlight “On” or “Off” and then push the switch. If “On” is selected[...]

5. The hour portion of the time is highlighted on the screen. Push the switch to change the hour field in increments of one hour. Push and hold the switch to fast forward the hours. Push the switch to move to the minutes field. 6. Push the switch to change the minute field in increments of ten minutes. Push and hold the switch to fast forward the m[...]

8. The settings confirmation screen will be dis- played. T o confirm and finish setting the cli- mate control timer, push the switch. 4-32 Display screen, heater, air conditioner, audio and phone systems[...]

AUT OMA TIC CLIMA TE CONTROL (MODELS WITH NA VIGA TION S Y STEM) 1. T emperature control button 2. (HEA T) button 3. Climate Ctrl. Timer indicator 4. (front defroster) button 5. (fan speed control) button 6. Rear window and outside mirror (if so equipped) defroster switch 7. (intake air control) button 8. Climate control system ON·OFF button 9. AU[...]

Note • If the fan speed control button, MODE button, or intake air control button is operated while AUT O is in use, all the other buttons operate in AUT O mode. • While the AUT O indicator is illuminated, electric power consumption of the air con- ditioner can be economized compared to the amount consumed while the AUT O indicator is not illum[...]

Note • The ventilation mode requires a lower power consumption, so cruising distance will increase. • In ventilation mode, temperature is not indicated on the navigation monitor or on the air conditioner display. Dehumidified defrosting/defogging: Press the front defroster button (the indi- cator light will illuminate) . • T o remove moisture[...]

Remote climate control This vehicle incorporates a communication de- vice that is called a T CU (T elematics Communi- cation Unit) . The communication connection be- tween this unit and Nissan Data Center allows for various remote function services. Even when away from the vehicle, climate control can be started by accessing the Nissan Data Center [...]

• Communication becomes unavailable when the vehicle is not used for two weeks or more. When the power switch is placed in the ON position, communication with the Nissan Data Center can be restored. • Air conditioning is limited to the capacity of the electric power when the charge connector is connected to the vehicle. Therefore, the tem- pera[...]

3. Set the temperature and the touch “OK” . Note • The temperature in the passenger com- partment may not be comfortable if enter- ing the vehicle too soon before or too long after the scheduled time of departure. • Air conditioning is limited to the capacity of the electric power when the charge connector is connected. Therefore, the tempe[...]

when the finest equipment is used. These char- acteristics are completely normal in a given re- ception area and do not indicate any malfunction in your NISSAN radio system. Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal rec[...]

SA TELLITE RADIO RECEPTION When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly . This is not a mal- function. Wait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the necessary data. N[...]

• CDs that are in poor condition or are dirty, scratched or covered with fingerprints may not work properly. • The following CDs may not work properly. – Copy control compact disc s (CCCD) – Recordable compact disc s (CD-R) – Rewritable compact disc s (CD-RW) • Do not use the following CDs as they may cause the CD player to malfunction:[...]

Playback order chart Playback order Musical playback order of a CD with MP3 or WMA files is as illustrated. • The names of folders not containing MP3 or WMA files are not shown in the display. • If there is a file in the top level of the disc, “Root Folder” is displayed. • The playback order is the order in which the files were written by[...]

Specification chart Supported media CD, CD-R, CD-RW Supported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not sup- ported. Supported versions*1 MP3 V ersion MPEG1, MPEG2, MPEG2.5 Sampling frequency 8 kHz - 48 kHz Bit rate 32 kbps - 320 kbps, VBR WMA V ersion WMA7, WMA8, WMA9 Sampling f[...]

T roubleshooting guide Symptom Cause and Countermeasure Cannot play Check if the disc was inserted correctly. Check if the disc is scratched or dirty . Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player wil[...]

USB (Universal Serial Bus) connection port WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION • Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down[...]

Bluetooth® streaming audio • Some Bluetooth® audio devices may not be recognized by the in-vehicle audio system. • It is necessary to set up the wireless connection between a compatible Bluetooth® audio device and the in-vehicle Bluetooth® module before using the Bluetooth® audio. • Operating procedure of the Bluetooth® audio will vary [...]

FM-AM-SA T RADIO WITH COMP ACT DISC (CD) PLA YER 1. CD EJECT button 2. RPT (repeat) button 3. RDM (random) button 4. Display screen 5. SCAN button 6. SEEK button CA T button 7. Apps button 8. BACK button 9. TUNE/SCROLL knob /ENTER/SETTING button 10. Station select (1–6) buttons 11. (power) button /VOL (volume) con- trol knob 12. DISP button 13. M[...]

Audio Bass Adjusts the bass to the desired level. T reble Adjusts the treble to the desired level. Balance Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers. Fade Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers. Speed Sens V ol. (Spee[...]

Bass, treble, balance and fade can also be ad- justed by pressing the ENTER/SETTING button and turning the TUNE/SCROLL control knob to select the item to adjust. When the desired item is shown on the display, turn the tuning to adjust and then press the ENTER/SETTING button until the display returns to the main audio screen. If the button is not pr[...]

1 to 6 Station memory operations Six stations can be set for the AM band. T welve stations can be set for the FM band (6 for FM1, 6 for FM2) . Eighteen channels can be set for the satellite radio (6 for XM1, 6 for XM2, 6 for XM3) . 1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button, or choose the satellite band XM1, XM2 or XM3 u[...]

If the CD comes out and is not removed, it will be pulled back into the slot to protect it. AUX IN jack The AUX IN jack is located under the control panel. The AUX IN audio jack accepts any stan- dard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer. MEDIA With a CD loaded, press the MEDIA button unt[...]

WARNING Do not connect, disconnect or operate the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury. CAUTION • Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the port. Make su[...]

IPOD® PLA YER OPERA TION (MODELS WITHOUT NA VIGA TION S Y STEM) Connecting iP od® The USB outlet connector is located in the center console. Open the lid and connect the iPod® cable to the USB connection port. The battery of the iPod® is charged while the connection to the vehicle. Depending on the version of the iP od®, the dis- play on the i[...]

• Second generation iPod nano® (Firmware ver- sion 1.1.3) • Third generation iP od nano® (Firmware version 1.0.0 or 1.1.3) • Fourth generation iP od nano® (Firmware ver- sion 1.0.2 or 1.0.4) • Fifth generation iPod nano® (Firmware version 1.0.1 or 1.0.2) • Sixth generation iPod nano® (Firmware version 1.0 or 1.2) • Seventh generati[...]

RANDOM (RDM) When the RDM play button is pressed while a track is being played, the play pattern can be changed as follows: Shuffle Off → T rack Shuffle → Album Shuffle- → Shuffle Off BACK button When the BACK button is pressed, it returns to the previous display . BLUET OO TH® STREAMING AUDIO (MODELS WITHOUT NA VIGA TION S Y STEM) If you ha[...]

CD CARE AND CLEANING • Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. • Always place the discs in the storage case when they are not being used. • T o clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. • Do not use a [...]

iPod®: • Tilt up/down for less than 1.5 seconds to in- crease or decrease the track number. CD: • Tilt up/down for less than 1.5 seconds to in- crease or decrease the track number. • Tilt up/down for more than 1.5 seconds to in- crease or decrease the folder number (if playing compressed audio files) . USB: • Tilt up/down for less than 1.5[...]

Registering with NissanConnect sm Mobile Apps T o use the Smartphone Integration feature, it is necessary for the user to register. In order to register, visit the NissanConnect sm Mobile Apps website, www .nissanusa.com/connect/ or https://canada.nissanconnect.com and sign up or create an account through the prompts on the NissanConnect Mobile App[...]

CAUTION • Keep the antenna as far away as pos- sible from the electronic control mod- ules. • Keep the antenna wire more than 8 in (20 cm) away from the electronic con- trol system harnesses. Do not route the antenna wire next to any harness. • Adjust the antenna standing-wave ra- tio as recommended by the manufac- turer. • Connect the grou[...]

Y our NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you have a com- patible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology, you can make or receive a hands-free telephone call with your cellular phone i[...]

• Y ou will not be able to use a hands-free phone under the following conditions: – Y our vehicle is outside of the cellular service area. – Y our vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area. – Y our cellular ph[...]

Initialization When the power switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. If the button is pressed before the initialization completes, the system will announce “Hands-free phone system not ready” and will not react to voice commands. Operating tips T o get the best performance out of[...]

1. Phone/send button 2. Phone/end button 3. T uning switch Phone/send Press the button to initiate a V oice Recog- nition session or answer an incoming call. Y ou can also use the button to interrupt the system feedback and give a command at once. For additional information, refer to “V oice com- mands” and “During a call” in this section. [...]

Menu Item Result Bluetooth ON/OFF Allows user to switch Bluetooth® on and off. Bluetooth® must be turned on in order to connect device. On T urns Bluetooth® functionality on. Off T urns Bluetooth® functionality off. Add Phone or Device Upon pressing this button, a message with a PIN appears on the screen. Operate the Bluetooth® phone to enter [...]

“Recent Calls” The following commands are available under “Recent Calls”: • Incoming Speak this command to list the last five incom- ing calls to the vehicle. If the call is from an entry in the phonebook, the name will be dis- played. Otherwise, the phone number of the incoming call will be displayed. Say “Dial” to call the number or[...]

• “Number” — Speak this command to place a call by inputting numbers. • For 7- and 10-digit phone numbers, speak the numbers. When finished, say “Dial” to initiate the call. Say “Correction” at any time in the process to correct a misspoken or misinterpreted number. • For phone numbers with more digits or spe- cial characters, s[...]

TEXT MESSAGING WARNING • Laws in some jurisdictions may restrict the use of “T ext-to-Speech” . Check lo- cal regulations before using this fea- ture. • Laws in some jurisdictions may restrict the use of some of the applications and features, such as social network - ing and texting. Check local regula- tions for any requirements. • Use t[...]

For additional information on setting and man- aging custom text messages, refer to “Bluetooth® settings” in this section. Reading a received text message: 1. Press the button on the steering wheel. 2. Say “Messaging” after the tone. 3. Say “Read T ext” after the tone. The text message, sender and delivery time are shown on the screen.[...]

• Select to delete a phone from the displayed list. The system will ask to confirm before deleting the phone. • Replace Phone • Select to replace a phone from the displayed list. When a selection is made, the system will ask to confirm before proceeding. The recorded phonebook for the phone being deleted will be saved as long as the new phone[...]

Operating tips • T o enter manual control mode, start the Voice Recognition system and tilt the tuning ( ) switch up or down. The system will speak “Showing Manual Options” when manual con- trols are initially activated. • T o browse the menu options, tilt the tuning ( ) switch up or down. The system will al- ways speak the current menu opt[...]

For additional information, refer to the separate Navigation Owner’s Manual. For additional information, refer to the separate Navigation Owner’s Manual. BLUET OO TH® HANDS-FREE PHONE S Y STEM WITH NA VIGA TION S Y STEM (IF SO EQUIPPED) NISSAN VOICE RECOGNITION S Y STEM (IF SO EQUIPPED) Display screen, heater, air conditioner, audio and phone [...]

NO TES 4-72 Display screen, heater, air conditioner, audio and phone systems[...]

5 Starting and driving Precautions when starting and driving .......... .5-2 Tire Pressure Monitoring System (TPMS) ...... .5-2 Avoiding collision and rollover ............. .5-5 Off-road recovery .................... .5-6 Rapid air pressure loss ................. .5-6 Drinking alcohol/drugs and driving .......... .5-7 Push-button power switch ....[...]

WARNING • Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cau[...]

speeds above 16 mph (25 km/h) to active the TPMS and turn off the low tire pressure warning light. Use a tire pressure gauge to check the tier pressure. The CHECK TIRE PRESSURE warning also appears on the vehicle information display when the low tire pressure warning light is illuminated oand low tire pressure is detected. The CHECK TIRE PRESSURE w[...]

• Replacing tires with those not origi- nally specified by NISSAN could affect the proper operation of the TPMS. • Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pres- sure sensors. CAUTION • The TPMS may not function properly when the wheels are equipped with tire chains or t[...]

Operation: 1. Add air to the tire. 2. After a few seconds, the hazard indicators will start flashing. 3. When the designated pressure is reached, the horn beeps once and the hazard indica- tors stop flashing. 4. Perform the above steps for each tire. • If the tire is over-inflated more than approxi- mately 4 psi (30 kPa) , the horn beeps and the [...]

OFF-ROAD RECOVER Y While driving, the right side or left side wheels may unintentionally leave the road surface. If this occurs, maintain control of the vehicle by follow- ing the procedure below. Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the con- ditions of the vehicle, road and tra[...]

DRINKING AL COHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alco- hol or drugs. Alcohol in the bloodstream reduces coordination, delays reaction time and impairs judgement. Driving af- ter drinking alcohol increases the likeli- hood of being involved in an accident injuring yourself and others. Additionally, if you are injured in[...]

OPERA TING RANGE FOR EV ST ART FUNCTION The Intelligent Key function can only be used for starting the EV system when the Intelligent Key is within the specified operating range 䊊 1 . When the Intelligent Key battery is almost dis- charged or strong radio waves are present near the operating location, the Intelligent Key sys- tem’s operating ra[...]

POWER SWIT CH OPERA TION When the power switch is pushed without de- pressing the brake pedal, the power switch posi- tion will change as follows. • Push once to change to ACC. • Push two times to change to ON. • Push three times to change to OFF. • Push four times to return to ACC. • Open or close any door to return to L OCK while in the[...]

POWER SWIT CH POSITIONS L OCK (Normal parking position) The power switch can only be locked in this position. The power switch will be unlocked when it is pushed to the ACC position while the driver is carrying the Intelligent Key . ACC (Accessories) This position activates electrical accessories, such as the radio, when the EV system is off. ON Th[...]

4. Push the power switch while depressing the brake pedal within 10 seconds after the chime sounds. The power switch position changes to the READY to drive mode. After step 3 is performed, if the power switch is pushed without depressing the brake pedal, the power switch position will change to ACC. NO TE: • When the power switch is pushed to the[...]

ELECTRIC SHIFT CONTROL S Y STEM This vehicle is electronically controlled to produce maximum available power and smooth operation. The recommended operating procedures for this vehicle are shown on the following pages. Starting vehicle 1. After placing the vehicle in the READ Y to drive position, fully depress the foot brake pedal before moving the[...]

NO TE: • Confirm that the vehicle is in the desired shift position by checking the shift indica- tor 䊊 1 located near the shift lever or the vehicle information display in the meter. • T o place the vehicle into the D (Drive) position from the B position, move the shift lever into the D (Drive) position. After placing the vehicle in the READY[...]

P (Park): Use this shift position when the vehicle is parked or when placing the vehicle in the READ Y to drive position. Make sure that the vehicle is completely stopped. In order to switch to the P (Park) position, press the P (Park) position switch as shown in the illustration above once the vehicle has come to a complete stop. If the P (Park) p[...]

B-mode: The B-mode engages the regenerative braking system more aggressively on downhill slopes, and helps reduce brake use. It is activated by moving the shift lever left and down. The shift lever will then return to the center position. ECO mode: Use ECO in order to help extend the driving range. In comparison to the D (Drive) position, ECO consu[...]

T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Firmly depress the parking brake and it will release. 3. Before driving, be sure the brake warning light goes out. PRECAUTIONS ON CRUISE CONTROL • If the cruise control system malfunctions, it will cancel automatically. The SET indicator on the vehicle i[...]

CRUISE CONTROL OPERA TION 1. ACCELERA TE (ACCEL)/RESUME (RES) switch 2. COAST/SET switch 3. CANCEL switch 4. CRUISE (ON/OFF) switch The cruise control allows driving at a speed be- tween 25 to 93 mph (40 to 149 km/h) without keeping your foot on the accelerator pedal. T o turn on the cruise control, push the CRUISE ON/OFF switch on. The CRUISE indi[...]

V ehicle range depends on a number of factors. Actual vehicle range will vary depending upon: • speed • vehicle load • electrical load from vehicle accessories • traffic and road conditions NISSAN recommends the following driving habits to help maximize vehicle range: Before driving: • Follow recommended periodic maintenance. • K eep ti[...]

1. Firmly apply the parking brake. 2. Push the P (Park) position switch on the shift lever. 3. T o help prevent the vehicle from rolling into the street when parked on a slope, it is a good practice to turn the wheels as illustrated. • HEADED DOWNHILL WITH CURB: 䊊 1 • T urn the wheels into the curb and move the vehicle forward until the curb [...]

Y ou may hear a noise when the steering wheel is operated quickly . However, this is not a malfunc- tion. If the power steering warning light illumi- nates while the READ Y to drive indicator light is ON, it may indicate the power steering system is not functioning properly and may need servicing. Have the power steering system checked by a NISSAN [...]

• If the power switch position is in a posi- tion other than ON or READ Y to drive, you can stop the vehicle by depressing the brake pedal. However, greater foot pres- sure on the brake pedal will be required to stop the vehicle, and the stopping dis- tance will be longer. • When depressing the brake pedal, the braking pedal feel will not be sm[...]

ANTI-L OCK BRAKING S Y STEM (ABS) WARNING • The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot prevent accidents resulting from care- less or dangerous driving techniques. It can help maintain vehicle control during braking on slippery surfaces. Remember that stopping distances on slippery surfaces will be longer than on [...]

The VDC system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to per- form the following functions. • Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a drive wheel on the same axle that is not slipping. • Controls brake [...]

• Do not modify the vehicle’s suspen- sion. If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not NISSAN recommended for your ve- hicle or are extremely deteriorated the VDC system may not operate properly. This could adversely affect vehicle handling performance, and the warning may flash or[...]

The hill start assist system automatically keeps the brakes applied to help prevent the vehicle from rolling backwards in the time it takes the driver to release the brake pedal and apply the accelerator when the vehicle is stopped on a hill. Hill start assist will operate automatically under the following conditions: • The shift lever is shifted[...]

FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry key fob. ANTIFREEZE In the winter when it is possible that the outside temperature will drop below 32°F (0°C) , check the antifreeze to[...]

• Allow greater following distances on slippery roads. • Watch for slippery spots (glare ice) . These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reach- ing it. T ry not to brake while on the ice, and avoid any sudden steering maneu- vers. • Do not use cruise control on slippery roads. [...]

NO TES 5-28 Starting and driving[...]

6 In case of emergency Hazard warning flasher switch .............. .6-2 Roadside assistance program ............... .6-2 Emergency EV (Electric Vehicle) shut off ........ .6-3 Flat tire ............................ .6-3 Tire Pressure Monitoring System (TPMS) ...... .6-3 Repairing flat tire .................... .6-4 Jump starting ..................[...]

Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights will flash. WARNING • If stopping for an emergency, be sure to move the vehicle well off the road. • Do not use the hazard warning flash- ers while moving on the highway un- less unusual circumstances force you to drive so sl[...]

T o shut off the EV (Electric Vehicle) system in an emergency situation while driving, perform the following procedure. • Rapidly push the power switch three consecu- tive times in less than 1.5 seconds, or • Push and hold the power switch for more than 2 seconds. TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with TPMS. It [...]

• Replacing tires with those not origi- nally specified by NISSAN could affect the proper operation of the TPMS. • The Genuine NISSAN Emergency Tire Repair Sealant or equivalent can be used for temporarily repairing a tire. Do not inject any other tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of tire pressu[...]

• Do not use the emergency tire punc- ture repair kit under the following con- ditions. Contact a NISSAN certified LEAF dealer or professional road assistance. – when the sealant has passed its ex - piration date (shown on the label attached to the bottle) – when the cut or the puncture is ap- proximately 0.25 in (6 mm) or longer – when the[...]

Before using emergency tire puncture repair kit • If any foreign object (for example, a screw or nail) is embedded in the tire, do not remove it. • Check the expiration date of the sealant (shown on the label attached to the bottle) . Never use a sealant whose expiration date has passed. Repairing tire: WARNING Observe the following precautions[...]

2. T ake the hose 䊊 1 and the power plug 䊊 2 out of the air compressor. Remove the cap of the bottle holder from the air compressor. 3. Remove the cap from the tire sealant bottle, and screw the bottle clockwise onto the bottle holder. (Leave the bottle seal intact. Screwing the bottle onto the bottle holder will pierce the seal of the bottle.)[...]

5. Remove the protective cap 䊊 A of the hose and screw the hose securely onto the tire valve. Make sure that the pressure release valve 䊊 B is securely tightened. Make sure that the air compressor switch is in the OFF (O) position, and then insert the power plug into the power outlet in the vehicle. 6. Push the power switch to the “ ACC” po[...]

WARNING T o avoid serious personal injury while us- ing the emergency tire puncture repair kit : • Securely tighten the compressor hose to the tire valve. Failure to do so can cause the sealant to spray into the air and get into your eyes or on the skin. • Do not stand directly beside the dam- aged tire while it is being inflated be- cause of t[...]

• If you used the Emergency Tire Sealant to repair a minor tire puncture, a NISSAN certified LEAF dealer will also need to replace the TPMS sensor in addition to repairing or replacing the tire. • NISSAN recommends using only NISSAN Genuine Emergency Tire Seal- ant provided with your vehicle. Other tire sealants may damage the valve stem seal w[...]

WARNING • Always follow the instructions below. Failure to do so could result in damage to the DC/DC converter and cause per- sonal injury. • Do not attempt to perform a jump start on the 12-volt battery at the same time that the Li-ion battery is being charged. Doing so may damage the vehicle or charging equipment and could cause an injury. CA[...]

9. While the booster vehicle 䊊 B engine is run- ning, place the EV system in the READ Y to drive position. CAUTION If the system does not start right away, push the power switch to the OFF posi- tion and wait 10 seconds before trying again. 10. After starting your EV system, carefully dis- connect the negative cable and then the positive cable ( [...]

Do not attempt to start the system by pushing the vehicle. CAUTION An EV (Electric Vehicle) cannot be push- started or tow-started. Attempting to do so may cause traction motor damage. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could dam- age your vehicle.[...]

T OWING RECOMMENDED B Y NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or that the vehicle be placed on a flatbed truck as illustrated. CAUTION • Never tow with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage to t[...]

• Do not use the vehicle tie-downs to tow or free a stuck vehicle. • Only use devices specifically designed for vehicle recovery and follow manu- facturer’s instructions • Always pull the recovery device straight out from the vehicle. Never pull on the vehicle at an angle. • Route recovery devices so they do not touch any part of the vehi[...]

NO TES 6-16 In case of emergency[...]

7 Appearance and care Cleaning exterior ...................... .7-2 W ashing ......................... .7-2 W axing .......................... .7-2 Removing spots ..................... .7-3 Underbody ........................ .7-3 Glass ........................... .7-3 Solar cell module (if so equipped) .......... .7-3 Wheels .......................[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, wash your vehicle as soon as you can: • after a rainfall to prevent possible damage from acid rain • after driving on coastal roads • when contaminants such as soot, bird drop- pings, tree sap, metal particles or b[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the paint surface to avoid lasting damage or staining. Spe- cial cleaning products are available at a NISSAN certified LEAF dealer or any automotive acces- sory stores. UNDERBOD Y In areas where road salt is used in winter, the underbody mus[...]

CAUTION Follow the directions below to avoid staining or discoloring the wheels: • Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. • Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as ambient temperature. • Rinse the wheel to completely remove the cleaner[...]

CAUTION • Never use benzine, thinner, or any similar material. • Small dirt particles can be abrasive and damaging to the leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, detergents or ammonia-based cleaners as they may damage the leather’s natural finish. • Never[...]

The illustration shows the location of floor mat brackets. SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. For additional information, refer to “Seat belts” in the “Safety-Seats seat belts and supplemental restraint syst[...]

T emperature A temperature increase will accelerate the rate of corrosion to those parts which are not well ven- tilated. Air pollution Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accel- erate the corrosion process. Road salt will also accelerate the disintegration of paint surfaces. PRO TECT [...]

NO TES 7-8 Appearance and care[...]

8 Maintenance and do-it yourself Maintenance requirement ................. .8-2 Scheduled maintenance ................ .8-2 General maintenance .................. .8-2 Where to go for service ................ .8-2 General maintenance .................... .8-2 Explanation of maintenance items .......... .8-2 Maintenance precautions .................[...]

Y our new NISSAN has been designed to have minimum maintenance requirements with long service intervals to save you both time and money . However, some day-to-day and regular maintenance is essential to maintain your NISSA- N’s fine mechanical condition, and its Electric V ehicle (EV) system performance. It is the owner’s responsibility to make[...]

keeps the motor hood from opening when the primary latch is released. When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights and other lights are all operating properly and install[...]

Seat belts: Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly, and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel: Check for changes in the steering conditions, such as excessive free play , hard steering or strang[...]

When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precau- tions that should be closely observed. WARNING • The EV system uses high voltage up to approximately DC 400 volt. The system can be hot during and after s[...]

– The Climate Ctrl. Timer is not active or operating. For additional infor- mation, refer to “Climate Ctrl. Timer” in the “Display screen, heater, air conditioner, audio and phone system” section of this manual. – The 12-volt battery is not being charged by the Li-ion battery and that all charging status indicator lights are off. For ad[...]

1. Brake fluid reservoir 2. 12-volt battery 3. Fuse holder 4. Fuse/Fusible link holder 5. Coolant reservoir cap 6. Windshield-washer fluid reservoir 7. Fuse/Fusible link holder MO T OR COMP ARTMENT CHECK LOCA TIONS Maintenance and do-it yourself 8-7[...]

The cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and 50% wa- ter to provide year-round antifreeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors. Additional cooling sys- tem additives are not necessary . WARNING • Never remove t[...]

CHECKING COOLANT LEVEL Check the coolant level in the reservoir when the high-voltage parts are cold. If the coolant level is below the MIN level 䊊 B , open the reservoir cap and add coolant up to the MAX level 䊊 A .I f the reservoir is empty , check the coolant level in the coolant reservoir when the high-voltage parts are cold. If there is in[...]

When checking or replacement is required, we recommend a NISSAN certified LEAF dealer for servicing. CAUTION • Use only Genuine NISSAN Matic S A TF. Do not mix with other fluids. • Using reduction gear fluid other than Genuine NISSAN Matic S A TF will cause deterioration in driveability and reduction gear durability, and may damage the reductio[...]

Except for Canada T o check the fluid level, use your finger to plug the center hole 䊊 1 of the cap/tube assembly, then remove it from the reservoir. If there is no fluid in the tube, add fluid. For Canada Fill the windshield-washer fluid reservoir periodi- cally . Add windshield-washer fluid when the low washer fluid warning appears on the vehic[...]

• K eep the 12-volt battery surface clean and dry . Clean the 12-volt battery with a solution of baking soda and water. • Make certain the terminal connections are clean and securely tightened. NO TE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation [...]

2. Check the fluid level in each cell. If it is nec- essary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe conditions require frequent checks of the 12-volt battery fluid level. JUMP ST ARTING Jump sta[...]

REPLACING Replace the wiper blades if they are worn. Pulling up the wiper arm The wiper arm should be in the up position when replacing the wiper. Pull up the wiper arm manually or using the wiper rise-up function. Wiper rise-up function: T o pull up the wiper arm, pull the lever 䊊 1 within 1 minute after the power switch is turned off. The wiper[...]

Replacing 1. Push the release tab 䊊 A , and move the wiper blade down the wiper arm 䊊 B while pushing the release tab to remove. 2. Insert the new wiper blade onto the wiper arm until a click sounds. 3. Rotate the wiper blade so that the dimple is in the groove. CAUTION • After wiper blade replacement, return the wiper arm to its original pos[...]

REAR WINDOW WIPER BLADE Contact a NISSAN certified LEAF dealer if checking or replacement is required. If the brakes do not operate properly, have the brakes checked by a NISSAN certified LEAF dealer. WARNING Do not adjust the height of the brake pedal. Doing so could alter the effective- ness of the brakes, which could result in a serious accident[...]

MO T OR COMP ARTMENT WARNING • Never touch, disassemble, remove or replace the high-voltage parts and cables, as well as their connectors. High-voltage cables are colored or- ange. T ouching, disassembling, re- moving or replacing those parts and cables can cause severe burns or elec- tric shock that may result in serious injury or death. • Nev[...]

6. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 7. If a new fuse also opens, have the electrical system checked, and if necessary, repaired by a NISSAN certified LEAF dealer. Fusible links If any electrical equipment does not operate and the fuses are in good condition, check the fusible links in the holders 䊊 1 , 䊊 2 and 䊊 [...]

P ASSENGER COMP ARTMENT WARNING Never use a fuse of a higher or lower amperage rating than that specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not operate, check for an open fuse. 1. Make sure that the power switch and the headlight switch are turned off. 2. Insert a screwd[...]

CAUTION • Be careful not to allow children to swallow the battery and removed parts. • An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal. • When changing batteries, do not let dust or oil get on the components. • There is danger of explosion if the lithium battery is incorrectly r[...]

4. Align the tips of the upper and lower parts 䊊 1 , and then push them together 䊊 2 until it is securely closed. 5. Operate the buttons to check that it is func- tioning properly. See a NISSAN certified LEAF dealer if you need any assistance for replacement. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is [...]

1. Headlight assembly 2. Map light 3. Room light 4. High-mounted stop light 5. Rear combination light 6. Cargo light 7. License plate light 8. Side marker light 9. Fog light (if so equipped) Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of th[...]

HEADLIGHTS Replacing Halogen headlight (high-beam): The headlight high-beam is a semi-sealed beam type that uses a replaceable headlight (halogen) bulb. CAUTION • Do not leave the bulb out of the head- light reflector for a long period of time. Dust, moisture, smoke, etc . entering the headlight body may affect bulb performance. • High-pressure[...]

Disconnect the battery negative cable before replacing bulbs. 1. Remove the connector 䊊 1 . 2. T urn the headlight bulb, and then remove the bulb 䊊 2 . EXTERIOR AND INTERIOR LIGHTS Item Wattage (W) Bulb No. Headlight assembly (T ype A) (if so equipped) High/Daytime running (Canada only) 65 H9 Low* — — Park/T urn signal 27/7 3457NAK Clearanc[...]

Replacement procedures All other lights are either type A , B, C, D or E. When replacing a bulb, first remove the lens and/or cover. : REMOVE : INST ALL Front turn signal light Clearance light (if so equipped) Maintenance and do-it yourself 8-25[...]

1. Remove the rear combination attachment bolt 䊊 1 . 2. Pull the rear combination assembly evenly toward rear of the vehicle 䊊 2 . 3. T urn the bulb socket and then remove the bulb 䊊 3 . License plate light Rear combination light 8-26 Maintenance and do-it yourself[...]

If you have a flat tire, refer to “Flat tire” in the “In case of emergency” section. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires. When the low tire pressure warning light is lit, and the CHECK TIRE PRESSURE warn- ing ap[...]

The TPMS with Easy Fill Tire Alert also provides visual and audible signals out- side the vehicle for inflating the tires to the recommended COLD tire pressure. For additional information, refer to “TPMS with Easy Fill Tire Alert” in the “Starting and driving” section of this manual. Incorrect tire pressure, including un- der inflation, may[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum number of occupants that can be seated in the vehicle. 䊊 2 Original size: The size of the tires originally installed on the vehicle at the factory. 䊊 3 Cold tire pressure: Inflate the tires to this pressure when the tires are cold. Tires are considered COLD after the vehicle[...]

4. Read the tire pressure on the gauge stem and compare it to the specifica- tion shown on the Tire and Loading Information label. 5. Add air to the tire as necessary. If too much air is added, press the core of the valve stem briefly with the tip of the gauge stem to release pressure. Re- check the pressure and add or release air as necessary . 6.[...]

䊊 1 Tire size (example: P215/ 60R16 94H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles. (Not all tires have this information.) 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to sidewall edge. 3. T wo-digit number (60): This number, known as the aspect ratio, giv[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identi- fication mark 3. T wo-digit code: Tire size 4. Three[...]

Other tire-related terminology: In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears white lettering or bears manufacturer, brand and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (2) the ou[...]

TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When installing tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain manufacturer’s suggestions. Use only SAE Class S chains. Class “S” chains are used on[...]

The wheel nuts must be kept tight- ened to the specification at all times. It is recommended that wheel nuts be tightened to the specification at each tire rotation interval. WARNING • After rotating the tires, check and adjust the tire pressure. • Retighten the wheel nuts when the vehicle has been driven for 600 miles (1,000 km) (also in cases[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. For additional information, re- fer to “Specifications” in the “T echnical and con- sumer information” section of this manual for rec- ommended types and sizes of tires and wheels. WARNING • Th[...]

Wheel balance Unbalanced wheels may affect vehicle handling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be bal- anced as required. Wheel balance service should be per- formed with the wheels off the vehicle. Spin balancing the wheels on the vehicle could lead to mechanical damage. For additional infor[...]

NO TES 8-38 Maintenance and do-it yourself[...]

9 T echnical and consumer information Recommended fluids/lubricants and capacities .... .9-2 Air conditioning system refrigerant and lubricant recommendations .................... .9-4 Specifications ........................ .9-5 Charging system .................... .9-5 Motor ........................... .9-6 Wheels and tires .................... .[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure that is described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (approximate) Recommended specifications US measure Imp measure Liter Cooling system With reser[...]

Capacity (approximate) Recommended specifications US measure Imp measure Liter Air conditioning system refrigerant — — — • HFC-134a (R-134a) • For additional information, refer to “ Air conditioner specification label” in this section of the manual. See a NISSAN dealer for service Air conditioning system lubricants — — — • Wit[...]

AIR CONDITIONING S Y STEM REFRIGERANT AND LUBRICANT RECOMMENDA TIONS The air conditioning system in your NISSAN vehicle must be charged with the refriger- ant, HFC-134a (R-134a) and the oil, com- pressor oil ND-OIL11 or the equivalents. CAUTION The use of any other refrigerant or oil will cause severe damage to the air condi- tioning system and wil[...]

CHARGING S Y STEM Rated input voltage AC120V (single phase) , AC240V (single phase) Rated input frequency 60Hz Maximum rated current 12A AC120V, 18A (AC240V) , 32A (AC220V; if so equipped) Charging modes/T ypes of connection AC Level 2 (Normal charge with home installation type EVSE (Electric V ehicle Supply Equipment)) DC Charging (Quick charge) R[...]

MO T OR Model EM57 WHEELS AND TIRES Road wheel T ype Size Offset in (mm) Steel 16 × 6 1/2J 1.57 (40) Aluminum 16 × 6 1/2J 1.57 (40) Aluminum 17 × 6 1/2J 1.77 (45) Tire Tires Size 205/55R16 215/50R17 DIMENSIONS AND WEIGHTS Overall length in (mm) 175.0 (4,445) Overall width in (mm) 69.7 (1,770) Overall height in (mm) 61.0 (1,550) Front tread w/ 16[...]

When planning to travel in another country, you should first find out if the charging equipment is compatible with that country’s electrical sys- tem. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regula[...]

TRACTION MO T OR SERIAL NUMBER The serial number of the traction motor is stamped on the traction motor as shown. 9-8 T echnical and consumer information[...]

F .M.V .S.S./C.M.V .S.S CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standards (F .M.V .S.S./C.M.V .S.S.) certification label is affixed as shown. This label contains valuable vehicle information, such as: Gross V e- hicle Weight Ratings (GVWR) , Gross Axle W eight Rating (GA WR) , month and year of manufacture, V ehicle Identifi[...]

AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is attached to the underside of the hood as shown in the illustration. Perform the following procedure to mount the license plate. Before mounting the license plate, confirm that the following parts are enclosed in the plastic bag. • License plate bracket 䊊 1 • Screw[...]

WARNING • It is extremely dangerous to ride in the cargo area inside the ve- hicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure everyone in your vehicle is in a seat and using [...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be rid- ing in your vehicle. 3. Subtract the combined weight of the driver and passengers from XX[...]

Also check tires for proper inflation pres- sures. For additional information, refer to the Tire and Loading Information label. L OADING TIPS • The GVW must not exceed the GVWR or GA WR as specified on the F .M.V .S.S./C.M.V .S.S. certification label. • Do not load the front and rear axle to the GA WR. Doing so will exceed the GVWR. WARNING •[...]

Do not tow a trailer with your vehicle. T owing your vehicle with all four wheels on the ground is sometimes called flat towing. This method is typically used when towing a vehicle behind a recreational vehicle, such as a motor home. CAUTION • Failure to follow these guidelines can result in severe transmission damage. • Whenever flat towing yo[...]

TRACTION AA , A , B AND C The traction grades, from highest to lowest, are AA , A , B and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified govern- ment test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. WARNING The traction grade assig[...]

Y ou may notify NISSAN by contacting our Consumer Affairs Department, toll-free, at 1-877-NOGASEV (1-877-664-2738) . For Canada If you believe that your vehicle has a de- fect which could cause a crash or could cause injury or death, you should immedi- ately inform T ransport Canada in addition to notifying NISSAN. If T ransport Canada receives com[...]

life; to offer you new or additional products or services; and as otherwise may be required by law . Such data may be shared with NISSAN’s parents, subsidiaries, affiliates, successors or as- signees; authorized NISSAN certified LEAF deal- ers; NISSAN’s marketing partners; your fleet company , if your vehicle is a fleet vehicle; your rental com[...]

T elematics features are dependent on cellular data transmission. Some areas may have limited or no cellular connectivity, resulting in a loss or interruption of data transmission and, as a result, certain features may be temporarily unavailable. Even if areas with good signal reception, cellular connectivity can be adversely affected by things suc[...]

NO TE: EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (for example, name, gender, age and crash location) are recorded. However, other par- ties, such as law enforcement, could com- bine the EDR data with the type of person- ally[...]

CHARGING INFORMA TION 9-20 T echnical and consumer information[...]

T echnical and consumer information 9-21[...]

The label is typically located on the driver side center pillar or on the driver’s door. For additional information, refer to “Wheels and tires” in the “Maintenance and do-it-yourself” section of this manual. COLD TIRE PRESSURES 9-22 T echnical and consumer information[...]

10 Index A ABS (Anti-lock Braking System) ........ 5 - 2 2 Advanced air bag system ........... 1 - 4 4 Air bag system ................. 1 - 4 4 Advanced air bag system .......... 1 - 4 4 Front passenger air bag and status light . .1-45 Front-seat mounted side-impact supplemental air bag system ........ 1 - 5 1 Roof-mounted curtain side-impact suppl[...]

T op tether strap ................ 1 - 2 2 C h i l d s a f e t y .................... 1 - 1 6 Child safety rear door lock ............ 3 - 6 Circuit breaker, Fusible link ........... 8 - 1 8 Cleaning exterior and interior ........ 7 - 2 , 7 - 4 C l i m a t e c o n t r o l .................. 4 - 3 8 Climate control service ............ 4 - 3 8 Clima[...]

Li-ion battery capacity level gauge ..... 2 - 1 0 Li-ion battery temperature gauge ....... 2 - 6 Odometer .................... 2 - 6 P ower meter .................. 2 - 7 Speedometer .................. 2 - 6 G e n e r a l m a i n t e n a n c e ............... 8 - 2 G l o v e b o x ..................... 2 - 5 3 H Hazard warning flasher switch ......[...]

Automatic door locks ............. 3 - 6 Door locks ................... 3 - 4 P ower door lock ................ 3 - 4 R e a r h a t c h l o c k ................ 3 - 1 8 Low tire pressure warning light ......... 2 - 1 6 Low tire pressure warning system (Refer to Tire Pressure Monitoring System (TPMS)) ...... 5 - 2 M Maintenance ................... 8[...]

R e a r c e n t e r s e a t b e l t .............. 1 - 1 4 Rear door lock, Child safety rear door lock . . .3-6 Rear hatch .................... 3 - 1 8 R e a r s e a t s ..................... 1 - 4 RearView Monitor ................. 4 - 3 Rear window and outside mirror defroster switch ....................... 2 - 4 1 Rear window wiper and washer sw[...]

Hazard warning flasher switch ........ 6 - 2 H e a d l i g h t s w i t c h ............... 2 - 4 2 P ower door lock switch ............ 3 - 5 Rear window and outside mirror defroster s w i t c h ..................... 2 - 4 1 T u r n s i g n a l s w i t c h .............. 2 - 4 4 V ehicle Dynamic Control (VDC) off s w i t c h ..................... 2[...]

W a r n i n g l i g h t ................... 1 - 5 4 A i r b a g w a r n i n g l i g h t ......... 1 - 5 4 , 2 - 1 9 Anti-lock braking system (ABS) warning l i g h t...................... 2 - 1 4 BRAKE system warning light (yellow) .... 2 - 1 4 BRAKE warning light (red) .......... 2 - 1 5 Low tire pressure warning light ....... 2 - 1 6 S e a t b e l[...]