Oregon Scientific EMR211 инструкция обслуживания

EN 1 Weather@Home Thermo Bluetooth-enabled Thermometer Model: EMR21 1 USER MANUAL CONTENTS Introduction .............................................................. 2 Overview ................................................................... 2 Front view .............................................................. 2 Rear view ................[...]

EN 2 INTRODUCTION Thank you for selecting our Oregon Scientific TM Weather@Home Bluetooth-enabled Thermometer , which has changeable display on indoor and outdoor temperature. NOTE Please keep this manual handy as you use your new product. It contains practical step-by-step instructions, as well as technical specifications and warnings you should k[...]

EN 3 REMOTE SENSOR (THN132N) 1 2 3 4 5 1. LED status indicator 2. Wall mount hole 3. Battery compartment 4. RESET hole 5. CHANNEL switch REFERENCE Other supported sensors include models: THGN328N, THGR328N, BTH sensor , THN318N. GETTING STARTED INSERT BATTERIES 1. Remove the battery compartment. 2. Insert the batteries, matching the polarities ( + [...]

EN 4 NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing. SENSOR DATA TRANSMISSION T o search for a sensor: 1. Press or to select among 5 different outdoor channels of remote sensors. 2 . Press and hold for 2 seconds to enforce researching for the selected sensor. T o auto-scan among sens[...]

EN 5 CONNECT WITH YOUR MOBILE DEVICE Y ou can remotely set the thermometer and read the weather information through Bluetooth 4.0 using your mobile device with the downloaded application from the Apple Store. T o quickly nd the application, type ‘Weather@Home’ as keyword in the search engine. Ensure your mobile device is compatible with iOS [...]

EN 6 T o reposition the sensors on screen: 1. On STATION screen, tap . 2. Press and hold at the right side of a sensor. Drag it to your desired position. 3. Tap to conrm. SETTINGS Y ou can set your weather station through the application, such as measurement units. The settings are as follows: • Temperature • Barometric (not available in EMR[...]

EN 7 VIEW CURRENT READINGS You can directly view all the temperature readings fr om different sensors through the application at a time. The readings are on the HOME screen. NOTE If low battery icon displays on the screen, please replace the batteries for the corresponding device. T o show unavailable sensor: If the sensor is out of range, the read[...]

EN 8 USE FUL REFERENCE The optional sensor (Model: BTH Sensor) can be purchased from Oregon Scientific. PRECAUTIONS • Do not subject the unit to excessive force, shock, dust, temperature or humidity. • Do not cover the ventilation holes with any items such as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid ov[...]

EN 9 T emperature range for ice alert 3°C to -2°C REMOTE THERMO SENSOR (THN132N) L x W x H 96 x 50 x 22 mm (3.78 x 1.97 x 0.87 in) Weight 62g (2.22 ounces) Transmission range 30 m (98 ft) unobstructed T emperature range -20°C to 60°C (-4°F to 140°F) Power 1 x UM-3 (AA) 1.5V batteries ABOUT OREGON SCIENTIFIC Visit our website www .oregonscient[...]

EN 10 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to ra[...]