Palsonic 7128 инструкция обслуживания

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888 71CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 7128 OWNER'S MANUAL Type Tested Electrical Safety AS/NZS 3250 Lic 4163 Standards Australia APP No: N15957[...]

Congratulations on your purchase of this Palsonic colour television receiver We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain is manual in an easily accessible location for future reference. Contents Main features Notes for operation .......................[...]

Main features Hyperband Auto/manual search 100 preset channels TV system: PAL-BG, NTSC 3.58/4.43(AV) Full function remote control English on screen menu display No-signal blue background display and AUTO-POWER-OFF function Four picture mode settings Sound mute function Sleep timer AV IN/OUT, S-VHS operation function 2 . . . . . . . . . . .[...]

NOTES FOR OPERATION * Do not let the TV set be in standby condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow caution[...]

Installation and appearance Antenna connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: When you connect the outdoor aerial cable to the aerial terminal on the TV set, please turn off the power switch on the TV while connectin[...]

Appearance Front view PUSH OWER SWITCH MENU MENU CHANNEL UP CHANNEL DOWN VOLUME DOWN VOLUME UP Note: Functions of MENU, VOL , CH and AV/TV are also provided to remote controller. Back view 5 AV/TV[...]

The remote controller Standby Channel direct select Sleep timer Picture mode selection *Sound system select Previous channel On screen recall Colour system select Picture control Volume control Channel select * NOTE: this TV model's RF sound system is BG only. Therefore the SYS1/2 button on the remote controller is ineffective in sound system [...]

Operation Turning the power on/off 1. Connect the power, push the main power switch, the red indicator is on, the set is in standby mode. 2. Push the button on the remote controller to turn on the set when the set is in standby, this time, the green indicator is on, on the upper right corner of the screen will display channel number, colour and sou[...]

1. PICTURE menu Making use of the PICTURE menu can adjust the picture effect according to your personal preference and it will be stored as picture memory mode automatically. Press the CH button to select the item (the selected item is highlighted in red). Press the VOL button to adjust it. The range is 0-63. Press the MENU button to exit to the ma[...]

2. PRESET menu PROG 28 SYS 1 SKIP OFF AUTO AFT ON SEARCH BAND U MANUAL Making use of the PRESET menu can fulfil the function of auto-search, search. manual search , channel and band selection. AFT and skip on/off. Press CH button to select the item. (the selected item is highlighted in red). Press the MENU button to exit to the main menu. 1) PROG ([...]

5) SYS ( sound system ) This item is used to select sound system. Since this TV model’s RF sound system is B/G only, this item gets into ineffectiveness in sound system selection. 6) Auto - search (AUTO) Press CH button to highlight AUTO . Press VOL button the set will automatically search and store the active TV signals in your local area from l[...]

3. FUNCTION menu STD AUTO BLUE ON Making use of the FUNCTION menu can select BLUE ON/OFF and current channel’s colour and sound system. Press CH button to select item (the selected item is highlighted). Press MENU button to exit to the main menu. 1) STD (colour system) selection. In this TV model the colour system is automatically identified. In [...]

l.......... Press " " Press " " BRIGHTNESS 0 2. Using CH button Press CH button, the channel number will be increased or decreased progressively. 3. Making use of button Press button to swap the currently viewed channel with the previous channel. Picture and volume adjustment 1. Picture adjustment Press PIC button repeatedly, on[...]

You can press the button to mute the sound. Press the button again or VOL button. The sound is restored to normal. 2. Volume adjustment You can press the VOL button to adjust the volume, and the green bar will move rightward or leftward, the volume output range is 0-63. SOUND MUTE MODE NORMAL SOUND MODE 13 MILD Picture mode selection You can select[...]

3. SLEEP timer Using the SLEEP button allows you to have the appliance automatically turned off after a preset time (the time range will be as long as 120 minutes), and set the appliance to standby mode. At every press of the button the setting time will be decreased by 30 minutes. When the remaining time is 5 minutes left, it will be displayed onc[...]

the screen displays AV1 and colour system; Press the button again and the set will be switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set will be switched to TV mode and the screen displays current TV channel. 12 AUTO Press AV Note: S-VHS IN and AV2 use the same interface. If you want to receive signals i[...]

External equipment connection This set is incorporated with Audio & Video input and output terminals which allows direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. 1. Video playback If your video equipment has a S-VHS output terminal, connect it to the S[...]

2. Recording 2.1 According to the following figure connect the TV set to the VCR. (Y) YELLOW (VIDEO) (W) WHITE (AUDIO, L/MONO) (R) (AUDIO, R) 2.2 When recording, set the TV on the desired channel, the program recorded is the program displayed on the screen. 17[...]

18 . . . . . . . . . . . Troubleshooting Guide Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Spots appear on the screen Stripes appear on the screen Double images or "ghosts" Colour and Sound is abnormal The remote controller does not work TV cabinet creaks Spe[...]

PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-29A03-00[...]