Planet Technology ADW-4302A v2 инструкция обслуживания

ADSL 2/2+ VPN Firewall Router ADW-4302A v2 / ADW-4302B v2 User's Manual[...]

Copyright Copyright © 2006 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, tr anscribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the p[...]

R&TTE Compliance Statement This equipment complies with all the r equirements of DIRE CTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/1[...]

[...]

Table of Contents CHAPTER 1 INTR ODUCTION ...................................................................................... 1 ADW-4302v2 F eatures .......................................................................................... 1 Package Cont ents .......................................................................................[...]

Diagnosti cs ....................................................................................................... 108 Remote Admini strati on .................................................................................... 109 Routin g ...........................................................................................................[...]

1 Chapter 1 Introduction This Chapter provides an overview of the ADW-4302v2's features and capabilities. Congratulations on the purchase of your new ADW-4302v2. The ADW-4302v2 is a multi-function device providing the following services: • ADSL 2/2+ Modem . • Shared Broadband Internet Access for all LAN users. • Wireless Access Point for[...]

ADW-4302v2 User Guide valid) IP Addresses are hidden from external sources. This process is called NAT (Network Address Translation). • Built-in ADSL 2/2+ Modem. The ADW-4302v2 has a built-in ADSL 2/2+ modem, supporting all common ADSL 2/2+ connections. • IPoA, PPPoE, PPPoA, Direct Connection Support. The ADW-4302v2 supports all common connecti[...]

Introduction Wireless Features • Standards Compliant. The ADW-4302v2 complies with the IEEE802.11g (DSSS) specifications for Wireless LANs. • Supports both 802.11b and 802.11g Wireless Stations. The 802.11g standard provides for backward compatibility with the 802.11b standard, so both 802.11b and 802.11g Wireless stations can be used simultane[...]

ADW-4302v2 User Guide • Firewall. All incoming data packets are monitored and all incoming server re- quests are filtered, thus protecting your network from malicious attacks from external sources. • Protection against DoS attacks. DoS (Denial of Service) attacks can flood your Internet connection with invalid packets and connection requests, u[...]

Introduction WLAN On - Wireless enabled. Off - No Wireless connections currently exist. Flashing - Data is being transmitted or received via the Wireless access point. This includes "network traffic" as well as user data. ADSL On - ADSL connection is available. Off - No ADSL connection available. Flashing - Data is being transmitted or re[...]

2 Chapter 2 Installation This Chapter covers the physical installation of the ADW-4302v2. Requirements • Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors. • TCP/IP protocol must be installed on all PCs. • For Internet Access, an Internet Access account with an ISP, and a DSL connec- tion. • To use the Wirel[...]

Installation 3. Connect ADSL Cable Connect the supplied ADSL cable from to the WAN port on the ADW-4302v2 (the RJ-11 connector) to the ADSL termi nator provided by your phone company. 4. Power Up Connect the supplied power adapter to the ADW-4302v2. Use only the power adapter provided. Using a differ ent one may cause hardware damage. 5. Check the [...]

Chapter 3 Setup This Chapter provides Set up details of the ADW-4302v2. Overview This chapter describes the setup procedure for: • Internet Access • LAN configuration • Wireless setup • Assigning a Password to prot ect the configuration data. PCs on your local LAN may also requi re configuration. For details, see Chapter 4 - PC Configuratio[...]

Setup Use any of the following Administration Configuration settings or features: • PC Database • Config File • Logging • E-mail • Diagnostics • Remote Admin • Routing • Upgrade Firmware Chapter 7 Advanced Administration 9[...]

ADW-4302v2 User Guide Configuration Program The ADW-4302v2 contains an HTTP server. This enables you to connect to it, and configure it, using your Web Browser. Your Brow ser must support JavaScript . The configuration program has been tested on the following browsers: • Netscape V4.08 or later • Netscape 7 • Internet Explorer V5.01 or later [...]

Setup If you can't connect If the ADW-4302v2 does not respond, check the following: • The ADW-4302v2 is properly install ed, LAN connection is OK, and it is powered ON. You can test the connec tion by using the "Ping" com- mand: • Open the MS-DOS window or command prompt window. • Enter the command: ping 192.168.0.1 If no respo[...]

ADW-4302v2 User Guide Common Connection Types Type Details ISP Data required Dynamic IP Address Your IP Address is allocated automatically, when you con- nect to you ISP. a) ADSL parameters (VPI and VCI) may be required, if they cannot be detected automati- cally. b) Some ISP's may require you to use a particular Host- name or Domain name, or [...]

Setup Home Screen After finishing the Setup Wizard, you will see the Home screen. When you connect in future, you will see this screen when you connect. An example screen is shown below. Figure 5: Home Screen Main Menu The main menu, on the left, contains links to the most-commonly used screen. To see the links to the other available screens, c lic[...]

ADW-4302v2 User Guide LAN Screen Use the LAN link on the main menu to reach the LAN screen. An example screen is shown below. Figure 6: LAN Screen Data - LAN Screen TCP/IP IP Address IP address for the ADW-4302v2, as seen from the local LAN. Use the default value unless the address is already in use or your LAN is using a different IP address range[...]

Setup • The DHCP Server provides the Gateway and DNS addresses to the client, as well as allocating an IP Address. • The ADW-4302v2 can act as a DHCP server . • Windows 95/98/ME and other non-Server ve rsions of Windows will act as a DHCP client . This is the default Windows setting fo r the TCP/IP network protocol. How- ever, Windows uses th[...]

ADW-4302v2 User Guide Wireless Screen The ADW-4302v2's settings must match the other Wireless stations. Note that the ADW-4302v2 will automat ically accept both 802.11b and 802.11g con- nections, and no configuration is required for this feature. To change the ADW-4302v2's default settings fo r the Wireless Access Point feature, use the W[...]

Setup SSID This is also called the "Network Name". • If using an ESS (Extended Service Set, with multiple access points) this ID is called an ESSID (Extended Service Set Identifier). • To communicate, all Wireless stations should use the same SSID/ESSID. Options Mode Select the desired mode: • 802.11G-plus (TI) This allows clients t[...]

ADW-4302v2 User Guide Allow access by … Use this feature to determine which Wireless stations can use the Access Point. The options are: • All Wireless Stations - All wireless stations can use the access point, provided they hav e the correct SSID and secu- rity settings. • Trusted Wireless stations only - Only wireless stat ions you designat[...]

Setup Wireless Security This screen is accessed by clicki ng the "Configure" button on the Wireless screen. There are 3 options for Wireless security: • Disabled - no data encryption is used. • WEP - data is encrypted using the WEP standard. • WPA-PSK - data is encrypted using the WPA- PSK standard. This is a later stan- dard than W[...]

ADW-4302v2 User Guide You must enter a Key Value for the Default Key . Key Value Enter the key value or values you wish to use. The Default Key is required, the other keys ar e optional. Other stations must have the same key. Passphrase If desired, you can generate a key from a phrase, instead of entering the key value directly. Enter the desired p[...]

Setup Trusted Wireless Stations This feature can be used to prevent unknown Wireless stations from using the Access Point. This list has no effect unless the setting Allow access by trusted stations only is enabled. To change the list of trusted wireless stations, use the Modify List button on the Ac- cess Control screen. You will see a screen like[...]

ADW-4302v2 User Guide Edit Use this to change an existing entry in the "Trusted Stations" list: 1. Select the Station in the Trusted Station list. 2. Click the Edit button. The address will be copied to the "Address" field, and the Add button will change to Up- date . 3. Edit the address (MAC or physical address) as required. 4.[...]

Setup Password Screen The password screen allows you to assign a password to the ADW-4302v2. Figure 11: Passw ord Screen Old Passw ord Enter the existing password in this field. New passw ord Enter the new password here. Verify pass- wo r d Re-enter the new password here. You will be prompted for the password when you connect, as shown below. Figur[...]

ADW-4302v2 User Guide Mode Screen Use this screen to change the mode between Router mode and Modem (Bridge) mode. Figure 13: Mode Screen Select the desired option, and click "Save". Router Both the ADSL Modem and the Rout er features are operational. In this mode, this device can provide shared Internet Access to all your LAN users. Also,[...]

4 Chapter 4 PC Configuration This Chapter details the PC Confi guration required on the local ("Inter- nal") LAN. Overview For each PC, the following may need to be configured: • TCP/IP network settings • Internet Access configuration • Wireless configuration Windows Clients This section describes how to configure Windows clients fo[...]

ADW-4302v2 User Guide Checking TCP/IP Settings - Windows 9x/ME: 5. Select Control Panel - Network . You should see a screen like the following: Figure 14: Netw ork Configuration 6. Select the TCP/IP protocol for your network card. 7. Click on the Properties button. You should then see a screen like the following. Figure 15: IP Address (Win 95) Ensu[...]

PC Configuration • On the Gateway tab, enter the ADW-4302v2's IP address in the New Gateway field and click Add , as shown below. Your LAN admin istrator can advise you of the IP Address they assigned to the ADW-4302v2. Figure 16: Gatew ay Tab (Win 95/98) • On the DNS Configuration tab, ensure Enable DNS is selected. If the DNS Server Sear[...]

ADW-4302v2 User Guide Checking TCP/IP Settings - Windows NT4.0 1. Select Control Panel - Network , and, on the Protocols tab, select the TCP/IP protocol, as shown below. Figure 18: Window s NT4.0 - TCP/IP 2. Click the Properties button to see a screen like the one below. 28[...]

PC Configuration Figure 19: Window s NT4.0 - IP Address 3. Select the network card for your LAN. 4. Select the appropriate radio button - Obtain an IP address from a DHCP Server or Specify an IP Address , as explained below. Obtain an IP address from a DHCP Server This is the default Windows setting. Using this is recommended . By default, the ADW-[...]

ADW-4302v2 User Guide Figure 20 - Window s NT4.0 - Add Gatew ay 2. The DNS should be set to the address provided by your ISP, as follows: • Click the DNS tab. • On the DNS screen, shown below, click the Add button (under DNS Service Search Order ), and enter the DNS pr ovided by your ISP. Figure 21: Window s NT4.0 - DNS 30[...]

PC Configuration Checking TCP/IP Settings - Windows 2000: 1. Select Control Panel - Network and Dial-up Connection . 2. Right - click the Local Area Connection icon and select Properties . You should see a screen like the following: Figure 22: Netw ork Configuration (Win 2000) 3. Select the TCP/IP protocol for your network card. 4. Click on the Pro[...]

ADW-4302v2 User Guide 5. Ensure your TCP/IP settings are correct, as described below. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically . This is the default Windows setting. Using this is recommended . By default, the ADW-4302v2 will act as a DHCP Server. Restart your PC to ensure it obtains an IP Address from the [...]

PC Configuration Checking TCP/IP Settings - Windows XP 1. Select Control Panel - Network Connection . 2. Right click the Local Area Connection and choose Properties . You should see a screen like the following: Figure 24: Netw ork Configuration (Window s XP) 3. Select the TCP/IP protocol for your network card. 4. Click on the Properties button. You[...]

ADW-4302v2 User Guide Figure 25: TCP/IP Properties (Window s XP) 5. Ensure your TCP/IP settings are correct. Using DHCP To use DHCP, select the radio button Obtain an IP Address automatically . This is the default Windows setting. Using this is recommended . By default, the ADW-4302v2 will act as a DHCP Server. Restart your PC to ensure it obtains [...]

PC Configuration Internet Access To configure your PCs to use the ADW-4302v2 for Internet access: • Ensure that the DSL modem, Cable modem, or other permanent connection is functional. • Use the following procedure to configure your Browser to access the Internet via the LAN, rather than by a Dial-up connection. For Windows 9x/ME/2000 1. Select[...]

ADW-4302v2 User Guide Macintosh Clients From your Macintosh, you can access t he Internet via the ADW-4302v2. The proce- dure is as follows. 1. Open the TCP/IP Control Panel. 2. Select Ethernet from the Connect via pop-up menu. 3. Select Using DHCP Server from the Configure pop-up menu. The DHCP Client ID field can be left blank. 4. Close the TCP/I[...]

PC Configuration Wireless Station Configuration This section applies to all Wireless stati ons wishing to use the ADW-4302v2's Access Point, regardless of the operating system which is used on the client. To use the Wireless Access Point in t he ADW-4302v2, each Wireless Station must have compatible settings, as follows: Mode The mode must be [...]

ADW-4302v2 User Guide Figure 27 Wireless Netw orks (Window s XP) If the "Broadcast SSID" setting on the ADW-4302v2 has been disabled, its SSID w ill NOT be listed. See the follow ing section "If the SSID is not listed" for details of dealing w ith this situation. 4. The next step depends on whether or not Wireless security has b[...]

PC Configuration To connect: • Check the checkbox Allow me to connect to the selected wireless network, even though it is not secure . • The Connect button will then be available. Click the Connect button, and wait a few seconds for the connection to be established. If using WEP Data Encryption If WEP data encryption has been enabled on the ADW[...]

ADW-4302v2 User Guide Figure 30: Advanced - Wireless Networks Select the SSID for the ADW-4302v2, and click Configure , to see a screen like the following: Figure 31: Wireless Netw ork Properties - WEP Configure this screen as follow s: • Set Network Authentication to match the ADW-4302v2. (If the setting on the ADW- 4302v2 is "Auto", t[...]

PC Configuration • For the Network key and Confirm network key , enter the default key v alue used on the ADW-4302v2. (Windows will determine if 64bit or 128bit encryption is used.) • The Key index must match the default key index on the ADW-4302v2. The default value is 1. • Ensu r e the options The key is provided for me automatically and Th[...]

ADW-4302v2 User Guide If using WPA-PSK Data Encryption If WPA-PSK data encryption has been enabl ed on the ADW-4302v2, it does not matter which network is selected on the screen below. Just click the Advanced button. Figure 33: Wireless Netw orks (Window s XP) You will then see a screen like the example below. Figure 34: Advanced - Wireless Network[...]

PC Configuration Figure 35: Wireless Netw ork Properties- WPA-PSK Configure this screen as follow s: • Set Network Authentication to WPA-PSK . • For Data Encryption , select TKIP . • For the Network key and Confirm network key , enter the network key (PSK) used on the ADW-4302v2. • Ensu r e the option This is a computer-to-computer (ad hoc)[...]

ADW-4302v2 User Guide Figure 36: Preferred Netw orks Click OK to establish a connection to the ADW-4302v2. If the SSID is not listed If the "Broadcast SSID" setting on the AD W-4302v2 has been disabled, its SSID will NOT be listed on the screen below. Figure 37: Wireless Netw orks (Window s XP) In this situation, you need to obtain the SS[...]

PC Configuration Figure 38: Unlisted Wireless Netw ork 2. Click the Add button. You will see a screen like the example below. Figure 39: Add Wireless Netw ork 3. Configure this screen as follows: • Enter the correct SSID, as used on the ADW-4302v2. Remember the SSID is case-sensitive, so be sure to matc h the case, not just the spelling. • Set [...]

ADW-4302v2 User Guide • If using data encryption (WEP or WPA-PSK), enter the key used on the ADW- 4302v2. See the preceding sections for details of WEP and WPA-PSK. • Uncheck the options. The key is provided for me automatically and this is a com- puter-to-computer (ad hoc) network . • Click OK to save and exit. 4. This wireless network will [...]

5 Chapter 5 Operation and Status This Chapter details the operati on of the ADW-4302v2 and the status screens. For Details of operation in Bridge (Modem) mode, see Chap- ter 8 - Modem Mode. Operation - Router Mode Once both the ADW-4302v2 and the PCs are configured, operation is automatic. However, there are some situations wher e additional Intern[...]

ADW-4302v2 User Guide Figure 41: Status Screen Data - Status Screen ADSL Modem Status This indicates the status of the ADSL modem component. Dow nStream Connection Speed Displays the speed for the DownStream Connection. UpStream Connection Speed If connected, displays the speed for the Up Stream (upload) ADSL Connection. 48[...]

Operation and Status VC 1 Status VC 2 Status VC 3 Status VC 4 Status For each VC (Virtual Circuit), the current status is dis- played. This will be either "Enabled" or "Disabled". Note: VC 1 is a standard (Routed) Internet connection. VC 2, VC 3 and VC 4 are Bridge-mode connections. Internet (VC1) Connection Method Displays the [...]

ADW-4302v2 User Guide Firmw are Version The version of the current firmware installed. Buttons ADSL Details Click this button to open a sub-window and view the details of each VC (Virtual Circuit). Connection Details Click this button to open a sub-window and view a detailed description of the current connection. Depending on the type of connection[...]

Operation and Status Connection Status - PPPoE & PPPoA If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the following example will be displayed when t he "Connection Details" button is clicked. Figure 42: PPPoE Status Screen Data - PPPoE/PPPoA Screen Connection Time This indicates how long the current connecti[...]

ADW-4302v2 User Guide Connection Details - Dynamic IP Address If your access method is "Direct" (no login), with a Dynamic IP address, a screen like the following example will be displayed when the "Connection Details" button is clicked. Figure 43: Connection Details - Fixed/Dynamic IP Address Data - Dynamic IP address Internet [...]

Operation and Status 53[...]

ADW-4302v2 User Guide Connection Details - Fixed IP Address If your access method is "Direct" (no login) , with a fixed IP address, a screen like the following example will be displayed when t he "Connection Details" button is clicked. Figure 44: Connection Details - Fixed/Dynamic IP Address Data - Fixed IP address Screen Intern[...]

6 Chapter 6 Advanced Features This Chapter explains when and how to use the ADW-4302v2's "Ad- vanced" Features. Overview The following advanced features are provided: • Access Control • Internet Access • Trusted PCs • Internet: • DMZ • Special Applications • URL filter • Dynamic DNS • Firewall Rules • Firewall Ser[...]

ADW-4302v2 User Guide Figure 45: Access Control Screen Data - Access Control Screen Internet Access Access control Select the desired options for Internet access control: • Disable - Nothing is blocked. • Block all Internet access - All traffic via the WAN port is blocked. • Block selected Services - You can select which Ser- vices are to blo[...]

Advanced Features Figure 46: Trusted PCs Data - Trusted PCs Trusted PCs Trusted PCs This lists any PCs which y ou have designated as “Trusted”. Other PCs This list any PCs detected by the router, which you have not designated as "Trusted". Buttons << Add a Trusted PC to the list (mov e from the "Other PCs" list). • S[...]

ADW-4302v2 User Guide Figure 49: Internet Screen DMZ This feature, if enabled, allows the DMZ computer on your LAN to be exposed to all users on the Internet. • This allows almost any applicat ion to be used on the "DMZ PC". • The "DMZ PC" will receive a ll "Unknown" connections and data. • If the DMZ feature is [...]

Advanced Features Figure 50: Special Applications Screen Data - Special Applications Screen Checkbox Use this to Enable or Disable this Special Application as required. Name Enter a descriptive name to identify this Special Application. Incoming Ports • Type - Select the protocol (TCP or UDP) used when you receive data from the special applicatio[...]

ADW-4302v2 User Guide Using a Special Application • Configure the Special Applications screen as required. • On your PC, use the application norma lly. Remember that only one (1) PC can use each Special application at any time. Also, when 1 PC is finished using a par- ticular Special Application, there ma y need to be a "Time-out" bef[...]

Advanced Features Note: It is necessary to click the Save button in the Access Control page for activation of Trusted PCs if you add/delete any entry of Trusted PCs page. Figure 51: URL Filter Screen Data - URL Filter Screen Current Filter Strings Current Filter Strings The list contains the current list of items to block. • To add to the list, u[...]

ADW-4302v2 User Guide Dynamic DNS (Domain Name Server) This free service is very useful when combined with the Virtual Server feature. It allows Internet users to c onnect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change[...]

Advanced Features DDNS Data Host Name Enter the domain name allocated to you by the DDNS Service. If you have more than one name, enter the name you wish to use. User Name Enter your Username for the DDNS Service. (TZO.com uses your E-mail address.) Passw ord Enter your current password for the DDNS Service. (TZO.com calls this a key.) Domain Name [...]

ADW-4302v2 User Guide Firewall Rules The Firewall Rules screen allows you to define "Firewall Rules" which can allow or prevent certain traffic. "Traffic" means incoming connection attempts, not packets. By default: • All Outgoing traffic is permitted. • All Incoming traffic is denied. Because of this default behavior, any O[...]

Advanced Features WAN Users The WAN IP address or addresses covered by this rule. Log Indicates whether or not connec tions covered by this rule should be logged. Buttons Use the Add button to create a new rule. The other buttons - Edit , Move , or Delete - require that a rule be selected first. Use the radio buttons in the left column to select th[...]

ADW-4302v2 User Guide Incoming Rules (Inbound Services) This screen is displayed when the "Add" or "E dit" button for Incoming Rules is clicked. Figure 54: Inbound Services Screen Data - Incoming Rules Screen Inbound Services Service Select the desired Service. This determines which packets are covered by this rule. If necessa r[...]

Advanced Features desired values in the "Single/Start" and "Finish" fields to de- termine the address range. • Single address - Enter the required address in the "Sin- gle/Start" fields. Log This determines whether packets co vered by this rule are logged. Select the desired action. • Alw ays - always log traffic c[...]

ADW-4302v2 User Guide • ALLOW by schedule, otherwise Block Note: • Any outbound traffic which is not blocked by rules you create will be allowed by the Default rule. • ALLOW rules are only useful if the traffic is already covered by a BLOCK rule. (That is, you wish to allow a subset of traffic which is currently blocked by another rule.) • [...]

Advanced Features Firewall Services Services are used when creating Firewall Rules. If you wish to create a firewall rule, but the required service is not listed in the "Ser- vice" list, you can use this feature to defi ne the required service or services. Once created, these services will be listed in the "Service" list, and ca[...]

ADW-4302v2 User Guide Add/Edit Service This screen is displayed when the Add or Edit button on the Services screen is clicked. Figure 57: Add/Edit Service Data - Add/Edit Service Services Name If editing, this shows the current name of the Service. If adding a new service, this will be blank, and you should enter a suitable name. Type Select the pr[...]

Advanced Features Options This screen allows advanced users to ent er or change a number of settings. For normal operation, there is no need to use this screen or change any settings. An example Options screen is shown below. Figure 58: Options Screen Data - Options Screen Internet Respond to Ping • If checked, the Wireless Router will respond to[...]

ADW-4302v2 User Guide Schedule This Schedule can be used for the Firewall Rules and the URL filter. Figure 59: Schedule Screen Data - Schedule Screen Schedule Day Each day of the week can scheduled independently. Session 1 Session 2 Two (2) separate sessions or periods can be defined. Session 2 can be left blank if not required. Start Time Enter th[...]

Advanced Features Use this NTP Server If you prefer to use a particula r NTP server as the primary NTP server, check the checkbox "Use this NTP Server" and enter the Server's IP address in the fields provided. If this setting is not enabled, the default NTP Servers is used. Current Time This displays the current time on the ADW-4302v[...]

ADW-4302v2 User Guide Virtual Servers This feature, sometimes called Port Forwarding , allows you to make Servers on your LAN accessible to Internet users. Normally , Internet users would not be able to ac- cess a server on your LAN because: • Your Server does not have a valid external IP Address. • Attempts to connect to dev ices on your LAN a[...]

Advanced Features • For Internet Users, ALL of your Servers have the same IP address. This IP ad- dress is allocated by your ISP. • To make it easier for Internet users to connect to your Servers, you can use the "DDNS" feature. This allows Internet user s to connect to your Servers with a URL, rather than an IP address. This technolo[...]

ADW-4302v2 User Guide For each entry, the PC must be running the appropri- ate Server software. If the desired Server ty pe is not listed, you can define your own Servers, using the Firew all Rules. Connecting to the Virtual Servers Once configured, anyone on the Internet can connect to your Virtual Servers. They must use the Internet IP Address (t[...]

Advanced Features VPN (IPSec) The VPN (Virtual Private Network) featur e in the ADW-4302v2 allows you to create a VPN connection between 2 ADW-4302v2s, or a remote PC to establish a VPN con- nection to the ADW-4302v2. To establish a VPN connection from a remote PC to the ADW-4302v2, you need suitable (IPSec) VPN cli ent software on your PC. For mor[...]

ADW-4302v2 User Guide VPN Policies Screen This screen is displayed when you select VPN on the Advanced menu. It allows you to create, modify and manage your VPN Policies. If you have not created any policies, the Policy Table will be empty. Figure 62: VPN Policies Screen Data - VPN Policies Screen Policy Table The Policy Table contains the followin[...]

Advanced Features VPN Status View details of each current VPN Tunnel (connection) in a sub-window. You also have the option of viewing the VPN Log. VPN Auto Policy Screen This screen is displayed when you click the Add Auto Policy button on the VPN Poli- cies screen, or when you edit an existing Auto Po licy. It allows you to define or edit an &quo[...]

ADW-4302v2 User Guide Data - VPN-Auto Policy Screen General Policy Name Enter a unique name to identify this policy. This name is not supplied to the remote VPN endpoint. It is used only to help you manage the policies. Remote VPN Endpoint If the remote endpoint has a dynamic IP address, select "Dynamic IP address". No "Address Data&[...]

Advanced Features IKE Direction This setting is used when determining if the IKE policy matches the current traffic. Select the desired option. • Responder only - Incoming connections are allowed, but outgoing connections will be blocked. • Initiator and Responder - Both incoming and outgoing connections are allowed. Exchange Mode IPSec has 2 p[...]

ADW-4302v2 User Guide IPSec PFS (Per- fect Forw ard Secrecy) If enabled, security is enhanced by ensuring that the key is changed at regular intervals. Also, even if one key is broken, subsequent keys are no easier to break. (Each key has no relationship to the previous key.) This setting applies to both IKE and IPSec SAs. When con- figuring the re[...]

Advanced Features VPN- Manual Policy Screen This screen is displayed when you click the Add Manual Policy button on the VPN Policies screen, or when you edit an existing Manual Policy. It allows you to define or edit a "Manual" VPN policy. A "Manual" VPN policy requires that you ent er all data on both VPN endpoints. There is no[...]

ADW-4302v2 User Guide NETBIOS Enable Check this if you wish NETBIOS traffic to be forwarded over the VPN tunnel. The NETBIOS prot ocol is used by Microsoft Networking. Local LAN Local LAN This identifies which PCs on your LAN are covered by this policy. For each selection, data must be provided as follows: • Single address Enter an IP address in [...]

Advanced Features Authentication Select the desired Authentication Algorithm, and enter the key in the field provided. • For MD5, the key should be 16 ASCII characters (32 Hex characters). • For SHA-1, the key shoul d be 20 ASCII (40 Hex charac- ters). 85[...]

ADW-4302v2 User Guide VPN Status Screen This screen is displayed when you cli ck the VPN Log button on the VPN Policies screen, or on the Status screen. This screen allows you to view details of each current VPN Tunnel (connection). If there are no current connections, t he status table will be empty. Figure 65: VPN-Status Screen Data - VPN Status [...]

Advanced Features Microsoft VPN Microsoft VPN uses the Micros oft VPN Adapter which is prov ided in recent versions of Windows. This feature can be used to provi de remote access to your LAN by individ- ual PCs. This method provides an alternat ive to using IPSec VPN, which is described in the previous chapter. Using Microsoft VPN provides easier s[...]

ADW-4302v2 User Guide Data – Microsoft VPN Screen PPTP Server Enable Use this checkbox to enable or disable this feature as required. To allow connection by remote Windows clients, you must enable this feature, and enter the client details (on the Clients screen) to allow them to login to this Server. Auto-disconnect Idle Time-out Use this checkb[...]

Advanced Features VPN Server Status Screen This screen is displayed when you click t he VPN Server Status button on the Micro- soft VPN screen. Figure 67: Microsoft VPN Status Screen Data - Microsoft VPN Status Screen Connection Table This table contains the following data about each current con- nection. • User Name – The login name. • Remot[...]

ADW-4302v2 User Guide Window s 98/ME 1. Click Start - Settings - Dial-up Networking 2. Select Make New Connection 3. Type a name for this connection, and ens ure that "Microsoft VPN Adapter" is selected. Click "Next" to continue. Figure 68: Window s ME VPN Adapter 4. Enter the Internet IP address or domai n name of this device. [...]

Advanced Features Figure 70: Window s ME VPN Dialing Properties To establish a connection: 1. Ensure you are connected to the Internet. 2. Select Start - Settings - Dial-up Networking 3. Double-click the new VPN entry in Dial-up Networking. 4. Enter your User name and Password, as recorded in the Client database on ADW-4302v2. 5. Click the "Co[...]

ADW-4302v2 User Guide 3. On the screen below: • Select "Do not dial the initial connecti on" if Internet access is via the LAN. • If using a PPPoE software client, select "A utomatically dial this initial connec- tion" and select the PPPoE connection. • Click Next to continue. Figure 72: Window s 2000 Public Netw ork 4. On[...]

Advanced Features Figure 74: Window s 2000 Connection Availability 6. Enter a suitable name, and click "Finish" to save and exit. Figure 75: Window s 2000 Finish Wizard Setup is now complete. To establish a connection: 1 Right-click the connection in "Netwo rk Connections", and select "Connect". 2 You will then be prom[...]

ADW-4302v2 User Guide • The Properties dialog has a Networking t ab with a "Type of VPN" setting. If you have trouble connecting, you can change this setting from "Automatic" to "PPTP VPN". Window s XP Ensure you have logged on with Administrato r rights before attempting this procedure. 1. Open Network Connections ([...]

Advanced Features Figure 78: Window s XP Connection Name 5. On the screen below, select "Do not dial the initial connection". Click Next to continue. Figure 79: Window s XP Public Netw ork 6. On the screen below, enter the Domain Name or Internet IP address of ADW- 4302v2 you wish to connect to. Click Next to continue. Figure 80: Window s[...]

ADW-4302v2 User Guide 7. Choose whether to allow this connection for everyone, or only for yourself, as required. Click Next to continue. Figure 81: Window s XP Connection Availability 8. On the final screen, click Finish to save and exit. Setup is now complete. To establish a connection: 1 Right-click the connection in "Netwo rk Connections&q[...]

Advanced Features SNMP Simple Network Management Protocol (SNMP) is the protocol which enable adminis- trator to monitor network and bandwidth usage as well as various other network parameters like system information and port usages, providing system administrators with live readings and periodical usage trends to optimize the network efficiency. S[...]

7 Chapter 7 Advanced Administration This Chapter explains the settings available via the "Administration" section of the menu. Overview Normally, it is not necessary to use these screens, or change any settings. These screens and settings are provided to deal with non-standard situations, or to provide additional options for advanced user[...]

Advanced Features PC Database The PC Database is used whenever you need to select a PC (e.g. for the "DMZ" PC). • It eliminates the need to enter IP addresses. • Also, you do not need to use fi xed IP addresses on your LAN. However, if you do use a fixed IP address on some devices on your LAN, you should enter details of each such dev[...]

ADW-4302v2 User Guide Data - PC Database Screen Know n PCs This lists all current entries. Data displayed is name (IP Address) type . The "type" indicates whether the PC is connected to the LAN. Name If adding a new PC to the list, enter its name here. It is best if this matches the PC's "hostname". IP Address Enter the IP [...]

Advanced Features PC Database - Advanced This screen is displayed if the "A dvanced Administration" button on the PC Database is clicked. It provides more control than the standard PC Database screen. Figure 84: PC Database (Admin) Data - Advanced PC Database Know n PCs This lists all current entries. Data displayed is name (IP Address) t[...]

ADW-4302v2 User Guide IP Address Select the appropriate option: • Automatic - The PC is set to be a DHCP client (Windows: "Obtain an IP address automatically"). The ADW-4302v2 will allocate an IP address to this PC when requested to do so. The IP address could change, but normally won't. • DCHP Client - Reserved IP Address - Sele[...]

Advanced Features Config File This feature allows you to download the current settings from the ADW-4302v2, and save them to a file on your PC. You can restore a previously-downloaded conf iguration file to the ADW-4302v2, by uploading it to the ADW-4302v2. This screen also allows you to set the AD W-4302v2 back to its factory default configu- rati[...]

ADW-4302v2 User Guide Logging The Logs record various types of activity on the ADW-4302v2. This data is useful for troubleshooting, but enabling all logs w ill generate a large amount of data and ad- versely affect performance. Since only a limited amount of log data c an be stored in the ADW-4302v2, log data can also be E-mailed to your PC. Use th[...]

Advanced Features Logs Include (Check- boxes) Use these checkboxes to determine which events are included in the log. Checking all options will increase the size of the log, so it is good practice to disable any events which are not really required. • Attempted access to blocked sites - If checked, attempted Internet accesses which were blocked a[...]

ADW-4302v2 User Guide E-mail This screen allows you to E-mail Logs and Alerts. A sample screen is shown below. Figure 87: E-mail Screen Data - E-mail Screen E-Mail Notification Turn E-mail Notification on Check this box to enable this feature. If enabled, the E-mail address information (below) must be provided. Send to this E- mail address Enter th[...]

Advanced Features E-mail Alerts Send E-mail alerts immedi- ately You can choose to have alerts E-mailed to you, by checking the desired checkboxes. The ADW-4302v2 can send an im- mediate alert when it detects a significant security incident such as • A known hacker attack is directed at your IP address • A computer on the Internet scans your IP[...]

ADW-4302v2 User Guide Diagnostics This screen allows you to perform a "Ping" or a "DNS lookup". These activities can be useful in solving network problems. An example Network Diagnostics screen is shown below. Figure 88: Netw ork Diagnostics Screen Data - Network Diagnostics Screen Ping Ping this IP Address Enter the IP address [...]

Advanced Features Remote Administration If enabled, this feature allows you to manage the ADW-4302v2 via the Internet. Figure 89: Remote Administration Screen Data - Remote Administration Screen Remote Administration Enable Remote Management Check to allow administration/management via the Internet. (To connect, see below). If Disabled, this device[...]

ADW-4302v2 User Guide To connect from a remote PC via the Internet 1. Ensure your Internet connection is established, and start your Web Browser. 2 In the "Address" bar, enter "HTTP://" follo wed by the Internet IP Address of the ADW-4302v2. If the port number is not 80, t he port number is also required. (After the IP Address, [...]

Advanced Features Routing Overview • If you don't have other Routers or Gate ways on your LAN, you can ignore the "Routing" page completely. • If the ADW-4302v2 is only acting as a Ga teway for the local LAN segment, ignore the "Routing" page even if your LAN has other Routers. • If your LAN has a standard Router (e.g[...]

ADW-4302v2 User Guide Figure 90: Routing Screen Data - Routing Screen RIP RIP Direction Select the desired RIP Direction. RIP Version Choose the RIP Version for the Server. Static Routing Static Routing Table Entries This list shows all entries in the Routing Table. • This area shows details of the selected item in the list. • Change any the pr[...]

Advanced Features Destination IP Address Normally 0.0.0.0, but c heck your router documenta- tion. Netw ork Mask Normally 0.0.0.0, but c heck your router documenta- tion. Gatew ay IP Address The IP Address of the ADW-4302v2. Metric 1 Other Routers on the Local LAN Other routers on the local LA N must use the ADW-4302v2's Local Router as the De[...]

ADW-4302v2 User Guide Entry 2 (Segment 2) Destination IP Address 192.168.2.0 Network Mask 255.255.255.0 (Standard Class C) Gateway IP Address 192.168.0.100 Metric 3 For Router A's Default Route Destination IP Address 0.0.0.0 Network Mask 0.0.0.0 Gateway IP Address 192.168.0.1 (ADW-4302v2's IP Address) For Router B's Default Route Des[...]

Advanced Features Upgrade Firmware The firmware (software) in the ADW-4302v2 can be upgraded using your Web Browser. You must first download the upgrade file, then select Upgrade Firmware on the Ad- ministration menu. You will see a screen like the following. Figure 92: Router Upgrade Screen To perform the Firmware Upgrade: 1. Click the Browse butt[...]

8 Chapter 8 Modem Mode This Chapter explains configurat ion and operation when in "Modem" or "Bridge" mode.. Overview There are two modes available on the Mode screen. • Router - Both the ADSL Modem and the Router features are operational. In this mode, this device can provide shared Inter net Access to all your LAN users. Als[...]

Advanced Administration Home Screen If in Modem mode, the home screen will look like the example below. Figure 93: Home Screen - Modem Mode Note that the menu has changed, many of t he options in Router mode are not avail- able. The screens available are: • Mode - change back to Router mode, if desired. • LAN - set IP address, mask and gateway.[...]

ADW-4302v2 User Guide Mode Screen This screen is change back to Router mode, if desired. Figure 94: Mode Screen Data - Mode Screen Device Name This field displays the current name of this device. Device Mode Select the desired device mode for the router: • Router - Both the ADSL Modem and the Router features are operational. In this mode, this de[...]

Advanced Administration Status Screen In Modem mode, the Status scr een looks like the example below. Figure 95: Status Screen - Bridge Mode Data - Status Screen (Bridge Mode) System Device Name The current name of the Router. This name is also the "hostname" for users with a "@Home" type connection. Firmw are Version The versio[...]

ADW-4302v2 User Guide UpStream Connection Speed If connected, displays the speed for the Up Stream (upload) ADSL Connection. VC 1 Status VC 2 Status VC 3 Status VC 4 Status For each VC (Virtual Circuit), the current status is dis- played. This will be either "Enabled" or "Disabled". ADSL Details Click this button to open a sub-w[...]

A Appendix A Troubleshooting This Appendix covers the most likely problems and their solutions. Overview This chapter covers some common probl ems that may be encountered while using the ADW-4302v2 and some possible solutions to them. If you follow the suggested steps and the ADW-4302v2 still does not func tion properly, contact your dealer for fur[...]

ADW-4302v2 User Guide • Check the ADW-4302v2's status scr een to see if it is working correctly. Problem 2: Some applications do not run properly when using the ADW- 4302v2. Solution 2: The ADW-4302v2 processes the data passing through it, so it is not transparent. For incoming connections, you must use the Virtual Server or Fire- wall Rules[...]

Appendix A - Troubleshooting devices should be shielded or relocated. • RF Shielding Your environment may tend to block transmission between the wireless stations. This will mean high access speed is only pos- sible when close to the ADW-4302v2. 123[...]

B Appendix B About Wireless LANs This Appendix provides some background information about using Wireless LANs (WLANs). Modes Wireless LANs can work in either of two (2) modes: • Ad-hoc • Infrastructure Ad-hoc Mode Ad-hoc mode does not require an Access Po int or a wired (Ethernet) LAN. Wire- less Stations (e.g. notebook PCs with wire less cards[...]

Appendix B - About Wireless LANs performance. This capability is called Roaming . (Access Points do not have or require Roaming capabilities.) Channels The Wireless Channel sets the radio frequency used for communication. • Access Points use a fixed Channel. You can select the Channel used. This allows you to choose a Channel which provides the l[...]

ADW-4302v2 User Guide Encryption The same encryption method must be used. The most common encryption method is TKIP. Another widely- supported method is AES. Wireless LAN Configuration To allow Wireless Stations to use the Access Point, the Wireless Stations and the Access Point must use the same s ettings, as follows: Mode On client Wireless Stati[...]

C Appendix C About VPNs Overview A VPN (Virtual Private Network) provides a secure connection between 2 points, over an insecure network - typically the Inte rnet. This secure connection is called a VPN Tunnel . There are many standards and protocols fo r VPNs. The standard implemented in the ADW-4302v2 is IPSec . IPSec IPSec is a near-ubiquitous V[...]

ADW-4302v2 User Guide Because the IKE and IPSec connections are s eparate, they have different SAs (secu- rity associations). Policies VPN configuration settings are stored in Policies . Note that different vendors use different terms. Generally, the terms "VPN Policy", "IPSec Policy", and "IPSec Proposal" have t he sa[...]

Appendix C - VPNs Common VPN Situations VPN Pass-through Figure 96: VPN Pass-through Here, a PC on the LAN behind the Router/Gat eway is using VPN software, but the Router/Gateway is NOT acting as a VPN endpoint. It is only allowing the VPN connec- tion. • The PC software can use any VPN pr otocol supported by the remote VPN. • The remote VPN S[...]

ADW-4302v2 User Guide Connecting 2 LANs via VPN Figure 98: Connecting 2 VPN Gatew ays This allows two (2) LANs to be connected. PCs on each endpoint gain secure access to the remote LAN. • The 2 LANs MUST use different IP address ranges. • The VPN Policies at each end determine when a VPN tunnel will be established, and what systems on the remo[...]

Appendix C - VPNs Configuration Settings - Gateway A Gateway A should be configured as shown below. Figure 100: Gatew ay A Configuration 131[...]

ADW-4302v2 User Guide Configuration Settings - Gateway B Gateway B should be configured as shown below. Figure 101: Gatew ay B Configuration Settings Setting LAN A Gatew ay LAN B Gatew ay Notes Policy Name Example Example Name does not affect operation. Select a meaningful name. Remote VPN Endpoint Fixed IP Address 205.17.11.43 Fixed IP Address 202[...]

Appendix C - VPNs NetBIOS Enable Enable Disable if not required. Local LAN IP address Mask 192.168.0.1 255.255.255.0 192.168.1.1 255.255.255.0 Local Address subnet. Use a more restrictive definition if possible. Remote LAN IP address Mask 192.168.1.1 255.255.255.0 192.168.0.1 255.255.255.0 Remote Address subnet. Use a more restrictive definition if[...]

Appendix D Specifications ADSL 2/2+ VPN Firewall Router Product 802.11g Wireless ADSL 2/2+ VPN Firewall Router Model ADW-4302v2A/B Hardware Standard Multi-Mode code support ANSI T1.413 Issue 2 ITU-T G.994.1 (G.hs) rev. 3 ITU-T G.992.1(G.dmt) - Annex A (ADSL over POTS for ADW-4302v2A) - Annex B (ADSL over ISDN for ADW-4302v2B) ITU-T G.992.2(G.lite) [...]

Appendix D - Specifications Dimension (W x D x H) 175 x 114 x 29 mm Power 12V DC, 1A Power Consumption Maximum 9.6W, 32.7 BTU Temperature: Humidity 0~40 degree C (operating), -10~70 degree C (storage) 5%~ 95% (non-condensing) Emission FCC, CE Wireless Interface Standards IEEE802.11b, IEEE802.11g WLAN , 802.11G-plus (Texas Instruments proprietary en[...]

ADW-4302v2 User Guide Regulatory Approvals FCC Statement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of t he FCC Rules. These limits are designed to provide reasonable protection against harmful in terference in a residential installation. This equipment generates, uses and c[...]