Precor EFX LCD инструкция обслуживания

Cardio Theater Integr ated Brac k et Assemb ly Instructions EFX ® Integrated LCD Scr een Option[...]

[...]

Cardio Theater Integrated Brac ket Assemb ly Instructions page 3 T able of Contents T able of Contents Bef ore Y ou Begin ............................................................................................. 4 Obta inin g Serv ice .............................................................................................................. [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 4 IMPOR T ANT SAFETY INSTRUCTIONS 1 Before Y ou Begin Thank you f or adding the Precor Cardio Theater Integrated LCD Screen Option to y our EFX ® . This option will add a new dimension to your workout. For proper installation, please read this guide thoroughly and follow the assembly i[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 5 Preparations 2 Important: T o attach the Cardio Theater Integrated Bracket, ask another adult for help. Do not attempt the assembly by yourself. Remember to read and follow the instructions in this guide. If y ou do not assemble the Cardio Theater Integrated Bracket according to these[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 6 Preparing the Unit 3 The illustration sho ws how the Cardio Theater Integrated Bracket will look after you install it on the EFX. This section contains preparation instructions for both the EFX546i and the EFX556i. EFX556i EFX546i Preparing the Unit[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 7 Preparing the EFX546i Preparing the EFX546i 1. Loosen the two screws on the handrail clamp using a ⁵⁄₃₂ -inch he x ke y . Important: Leave the handrails in the clamp. Do not remove the handrail clamp screws! 2. Remov e the front cov er . Loosen and remove the two screws securi[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 8 5. Remove the four fasteners securing the upright suppor t. Use a ¼-inch hex and ½-inch box end wrench to remov e the f asteners. K eep the fasteners together and within easy reach. Important: Ask someone for help before completing the next step . 6. Separate the display console fro[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 9 8. Attach the power extension cable to the power connector on the coaxial/power cable. Locate the coaxial/power cable provided with the LCD Screen. One end of the coaxial/power cable has three connectors; the other end has two connectors. Attach the power extension cable to the power [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 10 11 . Secure the display console. Replace two of the screws at the base of the console bracket. Do not fully tighten the screws. Leave space between the screw head and the displa y console brack et. The brack et assembly slides in betw een the two . Note: Once the display is secure, y[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 11 14 . Continue to feed the cable with its connectors through the lower support. Star t with the coaxial and power e xtension connectors. F eed them into the low er suppor t. Continue to slide the cable and its connectors so no excess remains at the gap between the upper and low er sup[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 12 19 . Secure the upright suppor t by replacing the f our fasteners set aside in step 5. 20 . Retighten the two handrail clamp screws. Important: Look underneath the handrail clamp at the gap between the handrails . The area between the ends of the handrails should be no larger than a [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 13 22 . Reinstall the front cover and secure it with the two scre ws remov ed in step 2. Bef ore tightening the front cov er , be sure to fit the lip of the front cover into the tabs along the inside surface of the grommet. T o complete the installation, ref er to the instr uctions on p[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 14 Preparing the EFX556i 1. Pry the rubber end cap off the base using a flat head screwdriver . Set the end cap aside. 2. Remov e the front cov er . Loosen and remove the two screws securing the front cov er . Set the front cov er and f asteners aside. 3. Move rubber grommet. Slide the [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 15 Important: Ask someone for help before completing the next step. 5. Remove the four fasteners securing the upright suppor t. Ask your assistant to hold the upper support while you use a ¼-inch he x and ½-inch box end wrench to remov e the f our fasteners that secure the upright sup[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 16 10 . Attach the power extension cable to the power connector on the coaxial/power cable. Locate the coaxial/power cable provided with the LCD Screen. One end of the coaxial/power cable has three connectors; the other end has two connectors. Attach the power extension cable to the pow[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 17 13 . Secure the display console. Replace two of the screws at the base of the display console bracket. Do not fully tighten the screws! Leave space between the screw heads and the displa y console brack et. The brack et assembly slides in betw een the two . 14 . Reconnect the data ca[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 18 16 . Pull the cable and its two connectors out of the low er suppor t and base tube. Note: Remember to leave about 3 feet (1 meter) of cable hanging out of the hole in the display console bracket. 17 . Secure the upright suppor t by replacing the f our fasteners set aside in step 5. [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 19 Front cover Upright support 21 . Replace the back cover and rubber grommet. Replace the back cover onto the upright sup- por t. Fit the lip of the back cov er into the tabs along the inside surface of the grommet. Apply pressure to the top of the back cover while you tighten the scre[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 20 4 Install the Bracket Assembly 1. Remov e the brack et cov er . Loosen the bolts on the pivot tube using a ⁷⁄₃₂ -inch he x ke y . Pull the brack et cov er aw a y from the assembly . Set it aside. 2. Feed the coaxial/power cable with its three connectors through the brac ket a[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 21 Install the Bracket Assembly 3. Fit the bracket assembly on to the display console bracket. Ask your assistant to lift the bracket assembly and position it along the back of the display console bracket. Make sure the bracket assem- bly slides into place so that the cutouts at the bas[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 22 5 Attach the LCD Screen Important: The screen spacer is used only f or the Cardio Theater PVS4/5/15 LCD Screen. 1. T o protect the LCD Screen f or the next f ew steps, place it screen side down on a clean work surface. Important: Use proper materials to protect the LCD Screen while y[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 23 6. Fully tighten the bottom two screws. Use a Phillips-head screwdriver to fully tighten the bottom two screws. Leave the top two screws finger tight. 7. Connect the coaxial/power cable connectors to the LCD Screen. Attach the connectors—coaxial, power , and D VD—to the bac k of [...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 24 6 Reinstall the Bracket Cover 1. Prepare the fasteners for reinstalling the bracket cov er . Push the washers and bearings toward the bolt heads so there is room for the bracket cover to slide in flush against the pivot tube. Important: Keep the br ack et cov er flanges flush with th[...]

Cardio Theater Integrated Brack et Assembly Instr uctions page 25 Connect the Controller and the Cables 7 Note: Retrieve the rubber adapter mounts from the bracket assembly package. Retrieve the controller from the LCD Screen package. 1. Connect the controller cable to the controller . A definite click is heard when the connector snaps into place i[...]

[...]

[...]

Cardio Theater Bracket Assembly Lit Kit # CX47836-102 EFX546i and EFX556i 20 June 2005 Precor and Cardio-Theater are registered trademarks of Precor Incor porated. Specifications subject to change without notice. Copyright 2005 Precor Incorporated. Precor web site: www .precor .com Precor Incor porated 20031 142nd Av enue NE P .O. Bo x 7202 Woodin [...]