Roberts Radio CR9970 инструкция обслуживания

CR9970 Dual Alarm CD Clock Radio Please read this manual before use ROBER TS Sound for Generations cr9970 instruction book.PMD 6/11/2004, 10:57 AM 1[...]

2 Contents ............................................................................ 2 Controls .......................................................................... 3- 4 Switching on and setting the time .................................... 5 Listening to the radio ........................................................ 6 Compact discs ..[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 3 Controls Front 1. Stop button 2. Repeat button 3. Snooze button 4. B.Skip button 5. Time Set button 11. Low Battery LED 12. Clock/CD Display 13. Play/Pause button 14. FM Stereo indicator 15. Power indicator 6. F.Rev button 7. F.Fwd button 8. Alarm 2 i[...]

4 Controls 25. Alarm 1 function switch 26. Alarm 2 function switch 27. Dimmer switch 28. Alarm Mode switch 29. CD Door handle 30. Tuning control 31. Function switch 32. Volume control 33. Battery compartment (on underside) 25 26 27 28 29 30 31 32 Left hand side Right hand side 33 cr9970 instruction book.PMD 6/11/2004, 10:57 AM 4[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 5 Switching on and setting the time Before using your CD clock radio you must first set the correct time. 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on at the wall socket. 2. The clock display will show 12:00.[...]

6 Listening to the Radio 1. Switch on your CD clock radio by pressing the Power On button . The Power indicator LED will light. 2. Slide the Function switch to the required waveband. 3. Tune in to the desired station by rotating the Tuning control . The station frequency is indicated in the dial scale. The Wire aerial located on the rear of your CD[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 7 Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD [...]

8 Inserting a CD 1. Press the Power On button to switch on your CD clock radio. The Power indicator will light. 2. Set the Function switch to CD. 3. To open the CD compartment, lift the CD door by the handle as shown. 4. Press the CD onto the spindle and close the CD door . The CD player will scan the contents of the CD and the number of the first [...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 9 Playing a CD 1. Press the Play/Pause button to start playback. The Play indicator will light. The display will show the track number. 2. Set the Volume control to the required setting. 3. To pause playback press the Play/Pause button . The track numbe[...]

10 Selecting a track 1. Whilst the CD is playing, press either the F.skip or B.skip buttons to change to the desired track. You can also skip tracks when the player is in stop mode. Skip to the desired track using the F.skip or B.skip buttons. 2. Press the Play/Pause button to play the selected track. Search function 1. Whilst the CD is playing, pr[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 11 CD repeat mode 1. Whilst the CD is playing press the Repeat button once to repeat the current track. The Repeat indicator will flash. 2. Press the Repeat button again to repeat all tracks on the CD. The Repeat indicator will light up. 3. Press the Re[...]

12 Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in Stop mode, press the Program button . The display will show ‘01’ and the Program indicator will flash. 2. Select the first track you wish to play using the F.skip or B.skip buttons . The track number will flash on the display. [...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 13 1 Erasing a programme 1. Programmes are erased by opening the CD door , changing position of the Function switch , pressing the Power Off button , or interrupting the mains supply. Checking a programme 1. Whilst the CD is in Stop mode, repeatedly pre[...]

14 Setting the alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times. Setting Alarm 1 1. Slide the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will show in the display. 2. Press the F.Fwd button to increase the t[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 15 Checking the Alarm Times 1. To check Alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will show in the display. 2. Return the Alarm 1 function switch to its previous position. The display will revert to show[...]

16 Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. Set the Alarm mode switch to the 'Buzz' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light. 3. Press the Power Off button to switch off your CD clock radio, the Power indi[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 17 Setting the alarms to wake to radio 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indi[...]

18 Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm Mode switch to the 'Music' position. 2. Set the Alarm 1 or Alarm 2 function switch to the 'On' position. The corresponding Alarm indicator will light. 3. Set the Function switch to the 'CD' position, insert a CD and ensure [...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 19 Snooze control 1. The buzzer, CD or radio alarm can be silenced for 7 minutes by pressing the Snooze button. This sequence can be repeated during the 60 minute alarm period. Sleep timer 1. CD or radio playback can be set to switch off automatically a[...]

20 Dimmer 1. The Dimmer switch, located on the left side of your clock radio, can adjust the intensity of the clock display to suit room brightness. Slide the Dimmer switch to either the High or Low setting to change the display brightness. 1 1 Changing the back up battery 1. If the Batt. Low LED illuminates it is necessary to change the back up ba[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 21 The Company reserves the right to amend the specification without notice. Specifications Power Requirements Mains AC 230 volts, 50Hz only Back-up Battery IEC size 6LR61 (6F22, PP3) Frequency Coverage F M 87.5 - 108MHz M W 525 - 1605kHz Circuit Featur[...]

22 Fuse This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug (BS1363). If another type of plug is used a 5A fuse should be fitted in the plug, adaptor or distribution board. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Back-up Battery (not necessary for the unit to function) Slide the battery cover catch in the direction of the ar[...]

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri) 23 Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail durin[...]

ROBERTS RADIO TECHNICAL SERVICES 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1 cr9970 instruction book.PMD 6/11/2004, 10:57 AM 24[...]