Samsung Pro815 инструкция обслуживания

ENGLISH User ’ s Manual Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera.[...]

ŝ 2 Ş ƈ Use this camera in the following order Insert the USB cable Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p.138) ſ To play back the movie clip on a PC, DirectX 9.0 or later must be i[...]

ŝ 3 Ş ƃ Getting to know your camera 5 ƃ Danger 6 ƃ Warning 6 ƃ Caution 7 ƃ System chart 8 ƃ Identification of features 10 ƈ Front 10 ƈ Side (Left/ Right) 10 ƈ Top 11 ƈ Back 12 ƈ Bottom 13 ƈ Self-timer lamp 14 ƈ Camera Status Lamp 14 ƈ Mode icon 14 ƃ Before using the camera 15 ƈ Connecting to a Power Source 15 ƈ Using the battery [...]

ŝ 4 Ş ƃ Save/ Load a specific camera configuration (MySET) 78 ƃ Spot AE point 79 ƃ Starting play mode 80 ƃ LCD monitor indicator 82 ƈ Rear LCD/ Finder LCD 82 ƈ Top LCD 83 ƃ Thumbnail button/ Enlargement button 84 ƃ Display/ Information button 86 ƃ Album mode 87 ƃ 5-function button 90 ƃ Remote control 91 ƃ Delete button 92 ƃ Setting u[...]

ŝ 5 Ş Thank you for buying a Samsung Digital Camera. ƃ Prior to using this camera, please read the user manual thoroughly. ƃ When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc.) to the A/S centre. ƃ Please check that the camera is operating properly prior to w[...]

ŝ 6 Ş ƈ Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. ƈ Please do not use this product in close proximity to flammable or explosive gases, [...]

ŝ 7 Ş Caution ƈ Leaking, overheating, or burst batteries could result in fire or injury. Ү Use batteries with the correct specification for the camera. Ү Do not short circuit, heat or dispose of battery in fire. Ү Do not insert the batteries with the reverse polarities. ƈ Remove the batteries when not planning to use the camera for a long pe[...]

ŝ 8 Ş Please check that you have the correct contents before using this product. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. CF (CompactFlash) card (p.20) DPOF compatible printer (see p.103) Exclusive bounce flash Flash plate Camera case User manual, Warranty card Camera strap Remote control Softw[...]

ŝ 9 Ş PictBridge compatible printer (see p.105) Computer (p.144) External monitor Yellow cable - Video, White/ Red colour - Stereo voice (see p.121) USB cable AV cable For Windows Ү PC with processor better than Pentium II 450MHz (Pentium 700MHz or better is recommended) Ү Windows 98/ 98SE/ 2000/ ME/ XP Ү Minimum 64MB RAM (XP : 128MB) Ү 200MB[...]

ŝ 10 Ş Front Side (Left/ Right) Side (Left) Side (Right) AF passive sensor High Speed shutter (HS) button Remote control sensor Flash Focus area selection (AF-A) button Focus mode selection button Speaker Connector cover Memory card slot cover Pop-up flash (OPEN) button/ Flash compensation button AF lock(AF-L) button Remote control sensor Microph[...]

ŝ 11 Ş To p Drive button Self-timer button Power button/ Power lamp Top LCD ISO button Metering button Hot shoe Flash status lamp Mode dial Speaker Shutter button EVC (Exposure Value Compensation) ring Focus ring Zoom ring Zoom scale indicator Flash Hot shoe cap Identification of features[...]

ŝ 12 Ş Back Connectors Memory card slot Strap eyelet AV port USB connector port DC-in port Finder LCD Diopter adjustment ring Card in use lamp LCD button ,Q[XTIa1VNWZUIQWVJ]WV Connector cover SCENE/ Delete button Back LCD Memory card slot cover Memory card eject lever Memory card slot 5-function button Play mode button Digital zoom/ E[...]

ŝ 13 Ş Bottom Battery chamber Battery chamber cover & lock Tripod socket Battery holder Battery chamber Diopter adjustment ring Identification of features[...]

ŝ 14 Ş ƈ Self-timer lamp ƈ Camera Status Lamp Icon Status Description - For the first 7 seconds, the lamp blinks at 1 second intervals. - For the final 3 seconds, the lamp blinks quickly at 0.25-second intervals. A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken. Blinking Blinking Blinking Lamp Co[...]

ŝ 15 Ş ƈ There are two ways in which to provide the camera with power. You can use battery or alternatively, you can use the AC adaptor. ƈ Specification of SLB-1974 rechargeable battery ſ To buy the exclusive AC adapter (SAC-81, DC 8.4V 1.5A), contact your nearest Samsung dealer or Samsung service centre. Connecting to a Power Source ƃ Please[...]

ŝ 16 Ş Using the battery : If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+/-). 1. Turn the battery chamber lock in the direction of the arrow (OPEN) and open the battery chamber cover. 2. Insert the battery taking note of the polarity (+/-). 3. Close the bat[...]

ŝ 17 Ş Battery status Battery indicator The battery is fully charged Prepare new battery There is low battery capacity (Warning indicator will display). There is no battery capacity (Red colour : Change the battery). ƈ There are 4 indicators for battery condition that are displayed on the LCD monitor. Removing the battery 1. Turn off the camera.[...]

ŝ 18 Ş 1. Plug the AC cord’s power plug into the wall outlet and insert the AC cord into the charger. ſ If the charging LED doesn’t blink as red or blinks as yellow, please check whether the battery is inserted with the correct polarity (+/-). ſ Check the battery charging status with the Charging LED of the charger. Status LED Being charged[...]

ŝ 19 Ş ƃ Always turn off the power before taking the AC adapter out of the mains supply. ƃ As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials. ƃ Please ensure that you use an AC adapter (SAC-81, DC 8.4V) with the correct specification for the ca[...]

ŝ 20 Ş ƃ Be sure to format the memory card (see p.116) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory car[...]

ŝ 21 Ş ƃ When the memory card slot cover opens, the camera can't be turned on by pressing the power button. ƃ Don’t remove the memory card when the Card in use lamp is blinking as this may cause damage to data in the memory card. ƃ If the memory card slot cover is opened while data is being saved, a warning alarm sounds and the camera p[...]

ŝ 22 Ş 1. Turn off the camera power by using the power button. Open the memory card slot cover. Press the memory card eject lever and the lever will pop up. Press the lever again and then the memory card will be released. 2. Remove the memory card and close the memory card slot cover. 3. To close, push the memory card slot cover until you hear a [...]

ŝ 23 Ş 1. Thread the strap through the strap eyelet on the camera as shown alongside. 3. Fasten the strap as shown. 4. Repeat steps 1 ~ 3 to attach the other end of the strap to the other eyelet. 2. Thread the strap back through the strap ring as shown alongside. Attaching the strap Before using the camera[...]

ŝ 24 Ş ƈ When you shoot in direct or bright lighting conditions, the image quality may be deteriorated caused by unnecessary light. In this case, use the lens hood. 1. Attach the lens adapter to the camera by turning the lens adapter clockwise as shown alongside. ſ You can use a general purpose filter ( Ґ 72mm) after attaching the lens adapter[...]

ŝ 25 Ş ƈ When you don’t use the camera, attach the lens cap. You can attach the lens cap as show below. Attaching the lens cap Before using the camera[...]

ŝ 26 Ş No. Description Icons Page 1 Drive modes p.36~39 2 Image size p.70 3 Self-timer/ Remote control p.40~41 4 Metering p.43 5 Battery status p.17 6 High speed shutter mode/Camera shake warning p.49, 34 7 Voice memo p.76 8 Contrast p.73 9 Saturation p.74 10 Image quality p.71 11 Sharpness p.75 12 Focus Lock p.47 13 Focus mode p.47~48 [ Image &a[...]

ŝ 27 Ş 14 Direct MF p.48 15 Focal length/ Digital zoom 28mmX4.0 p.44~45 16 Exposure compensation p.50 17 Flash power compensation p.58 18 Date imprint p.119 19 Flash p.57~60 20 Macro p.55~56 21 White balance p.53~54 22 ISO p.42 23 Aperture value F2.2 p.30~31 24 Shutter speed 1/1600 p.30~31 25 Colour space p.77 27 Number of available shots remaini[...]

ŝ 28 Ş ڹں ڻ ڼ ڽ ھ ڿ ۀ ہ ۂ ۃ ۄ ۅۆ ۇ ؅ ؆ ؇ ؈ ؉ ؊ ؋ ، No. Description Icons Page 2 ISO p.42 3 Shutter speed 1/1600 p.30~31 4 Camera shake warning p.34 5 Exposure lock p.51 6 Aperture value F2.2 p.30~31 7 Saturation p.74 8 Sharpness p.75 9 Image size p.70 10 Image quality p.71 11 Number of shots remaining 25 p.21 12 Drive mode [...]

ŝ 29 Ş 17 Focus lock/ Focus mode p.47~48 18 Contrast p.73 19 Compensation indicator p.50 20 Flash power compensation p.58 21 Self-timer p.40~41 22 White balance p.53~54 23 Flash p.57~60 Recording mode Please select this mode for quick and easy picture taking with minimal user interaction. 1. Insert the battery and memory card. (p.16, 22) 2. Press[...]

ŝ 30 Ş ƈ How to use the PROGRAM mode ( ) Selecting the program mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. Step 1~2 are the same as those for AUTO mode. 3. Select the PROGRAM mode by rotating the mode dial. 4. Press the menu button to configure [...]

ŝ 31 Ş ƈ How to use the SHUTTER PRIORITY mode ( ) This mode will set the shutter speed for automatic exposure depends on the brightness of the object by automatic aperture value setting in the camera. Steps 1~2 are the same as those for AUTO mode. 3. Select the SHUTTER PRIORITY mode by rotating the mode dial. 4. Select the desired shutter speed [...]

ŝ 32 Ş ƈ How to use the MySET mode ( ) This mode allows users to save frequently used shooting settings for later use. Steps 1~2 are the same as those for AUTO mode. 3. Select the MySET mode by rotating the mode dial. 4. Press the menu button and select the [ ] menu tab. 5. Press the Right button and select the [Load Myset] menu by pressing the [...]

ŝ 33 Ş ƈ How to use the SCENE mode ( ) Use the menu to easily configure optimal settings for a variety of shooting situations. These include NIGHT, PORTRAIT, CHILDREN, LANDSCAPE, CLOSE UP, TEXT, SUNSET, DAWN, BACKLIGHT, FIREWORKS and BEACH & SNOW scenes. Steps 1~2 are the same as those for AUTO mode. 3. Select the SCENE mode by rotating the [...]

ŝ 34 Ş ƈ Pressing the shutter button down half way. Lightly press the shutter button to confirm focus and flash battery charge (p.14). - When the green auto focus frame lights up, it means the camera is focused on the subject and a beep will sound. - When the flash is charged, the flash status lamp (Red) will illuminate. Press the shutter button[...]

ŝ 35 Ş ƈ The RECORDING (AUTO, PROGRAM, APERTURE PRIORITY, SHUTTER PRIORITY, MANUAL, MySET, MOVIE CLIP, SCENE) mode can be set up by using the camera buttons. ƃ Used for turning the camera’s power on or off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Ref[...]

ŝ 36 Ş ƈ You can select various shooting modes. ƈ Drive mode ƃ Single shooting ( ) : Takes one picture only. ƃ Continuous shooting ( ) : Images will be taken continuously until the shutter button is released. ƃ High speed continuous shooting ( ) : This takes 2.5 shots per second when the shutter is pressed down and held. ƃ Ultra High speed [...]

ŝ 37 Ş ƃ How to set the AEB 1. Select the AEB icon by rotating the Rear jog dial (JOG2) 2. Select a desired exposure value by rotating the Front jog dial (JOG1). - The pre-view image will display on the Rear LCD as the exposure value is changed. 3. Press the OK or Shutter button to set the exposure value. 4. Press the shutter button to capture a[...]

ŝ 38 Ş ſ You can’t select the WBB icon in the Auto recording mode and movie clip mode. ƃ How to set the WBB 1. Select the WBB icon by rotating the Rear jog dial (JOG2) 2. Select a desired white balance value by rotating the Front jog dial (JOG1). - The pre-view image will display on the Rear LCD as the white balance value is changed. 3. Press[...]

ŝ 39 Ş ƃ How to use the interval shooting 1. Select the Interval shooting icon [ ] by rotating the Rear jog dial (JOG2). 2. Press the shutter button to capture an image. Images are taken at a set interval. - After taking a picture, the camera power is turned off automatically. - After a set time, the camera power is turned on automatically and t[...]

ŝ 40 Ş ƈ This function is often used when the photographer would also like to be in the image. ƈ How to use the Self-timer/ Remote button 1. Press the self-timer button and a self-timer icon will display on the LCD. 2. Select a desired self-timer by rotating the Rear jog dial (JOG2). 3. Press the OK button to set the setting. - Selecting a self[...]

ŝ 41 Ş [ Shutter button on the remote control ] ƃ Remote control range When you take an image by using the remote control, refer to the illustrations shown alongside about the remote control range. ƃ Replacing batteries for the remote control Make sure the + polarity is toward the top and the - polarity is toward the bottom while installing bat[...]

ŝ 42 Ş ƈ You can select the ISO sensitivity when taking pictures. The speed or specific light-sensitivity of a camera is rated by ISO numbers. ƈ ISO - AUTO ( ) : The camera’s sensitivity is automatically changed by variables such as lighting value or subject brightness. - 50, 100, 200, 400 : You can increase the shutter speed while the same a[...]

ŝ 43 Ş ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take better pictures. ƈ Metering methods - Multi metering ( ) : Exposure will be calculated based on each parts of the LCD divided into several parts. This is suitable for general use. - CWA (Centre Weighted Average) metering ( ) : Exposure will be[...]

ŝ 44 Ş ƈ You can change the zoom rate by rotating the Zoom ring. ƃ This camera has a 15X optical zoom and a 2X and 4X digital zoom function. Using both will offer a total zoom ratio of 30X or 60X. [ Wide ] [ Tele ] [ Tele ] [ Wide ] ƃ Optical Zoom WIDE Rotate the Zoom ring to left. This will zoom out from the subject i.e. the subject will appe[...]

ŝ 45 Ş ƃ Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. ƃ The digital zoom cannot be used in RAW, TIFF and movie clip shots. ƃ You may notice a decrease in image quality when using the digital zoom. ƃ The higher optical and digital zoom, the more camera shake can be t[...]

ŝ 46 Ş ƈ You can select the proper focus mode by switching the focus switch. ƃ AF-A : Changing the focus frame ( ) You can change the focus frame size and position according to the subject size and position by pressing the AF-A button. This function is available in the AF-S, AF-C mode. - Wide AF : This is useful when taking wide range of frame.[...]

ŝ 47 Ş ƃ AF-C : Continuous Auto Focus This is suitable for taking moving subject. The camera keeps focusing the subject when the shutter button is pressed halfway down. ſ Note that using the Continuous Auto Focus uses more battery than the Single Auto Focus. ƃ AF-L : Focus lock To focus on the subject positioned outside of the centre, use this[...]

ŝ 48 Ş ƃ MF : Manual Focus Where the automatic focusing is not available, for example, in very dark conditions, use the manual focus. Please be careful when using the manual focus as the picture can be blurred easily. ƃ How to set Manual focus in the Program mode You can change the focus even though the camera is focused on a subject by rotatin[...]

ŝ 49 Ş ƈ You can reduce camera shake without using the flash in this mode. ƃ How to set the High speed shutter mode 1. Press the HS (High Speed) button for over 1 second to set the High speed shutter mode. 2. The HS icon will display on the Rear LCD as shown alongside. 3. Press the shutter button to capture an image. ƃ Note that the noise leve[...]

ŝ 50 Ş ƈ Exposure compensation This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the EVC (Exposure Value Compensation) ring. This function is available in the PROGRAM, APERTURE PRIORITY, SHUTTER PRIORITY, SCENE, MySET, MOVIE CLIP mode. * A negative exposur[...]

ŝ 51 Ş ƈ Exposure lock This camera automatically adjusts the exposure according to the ambient lighting conditions. You can change the exposure value manually by using the AE-L (Auto Exposure Lock) button in a lighting situation where there are exposure differences between a subject and background. ƃ How to set the Exposure Value Compensation 1[...]

ŝ 52 Ş ƈ The 5 function button activates the following; - Up button : While the menu is showing, press the Up button to move up the cursor up the sub menu. When the menu is not displayed on the LCD monitor, the UP button operates as the white balance button. - Down button : While the menu is showing, press the Down button to move the cursor down[...]

ŝ 53 Ş ƈ The white balance control allows you to adjust the colours to appear more natural looking. ƃ How to set the white balance 1. Press the WB (Up) button and a white balance icon will display on the LCD monitor. 2. Select a desired white balance by rotating the Rear jog dial (JOG2). AUTO : The camera automatically selects the appropriate w[...]

ŝ 54 Ş ƃ How to set the custom white balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. 1. Select the CUSTOM ( ) menu of the White Balance. You can select CUSTOM 1 or CUSTOM 2 whi[...]

ŝ 55 Ş ƈ When the menu is not showing, you can use the MACRO/ DOWN button to take macro pictures. 1. Press the Macro (Down) button and the macro icon will display on the LCD. 2. Select a desired macro icon by rotating the Rear jog dial (JOG2). 3. Press the Macro (Down) button to set the setting. 1. Rotate the Zoom ring and place the zoom ring at[...]

ŝ 56 Ş ƈ Available focusing method, by recording mode. The items indicated by are default settings. (O: Selectable, X: Not selectable) ƃ If you rotate the zoom ring to the zoom mark on the barrel of the lens, macro mode will change to Auto macro (unless it is in S. MACRO mode). ƃ When the macro mode is selected, it is possible that camera shak[...]

ŝ 57 Ş ƈ You can select a flash according to the shooting conditions. ƃ How to set the pop-up flash 1. Press the Menu button and select the [P] menu tab. 2. Press the Right button and select [Pop-up] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired menu by pressing the Up/ Down button. - [Auto] : The flash wi[...]

ŝ 58 Ş ƃ Flash compensation : The intensity of the flash will be controlled, according to the lighting conditions. 1. Press the Pop-up flash button and the flash will pop up. 2. Press the Pop-up flash button again and a gauge will display as shown alongside. 3. Rotate the Front jog dial (JOG1) to select a desired intensity of flash. 4. Press the[...]

ŝ 59 Ş ƈ Flash range (Internal flash) ƈ Flash mode indicator (Unit : cm, ISO 100) Icon Flash mode Description If the subject or background is dark, the camera flash will operate automatically. The Fill in flash icon will display in dark condition and the Flash off icon will display in bright condition. If a subject or background is dark, the ca[...]

ŝ 60 Ş ƃ If the pop up flash doesn ’ t open fully, do not press the shutter button. It may damage the flash. ƃ Keep the flash clearly or the flash power ratio can be decreased. ƃ When you press the shutter button after selecting the Auto, Fill in, Slow synchro flash, the flash will fire to check the shooting conditions like the subject’s d[...]

ŝ 61 Ş ƈ You can mount an external flash in accordance with the shooting conditions. ƈ If the external flash is mounted, you can’t use the internal flash. ƈ When the external flash is mounted, it is possible that camera shake will occur. We recommend using a tripod to reduce this. ƈ Refer to the user manual of the external flash (optional) [...]

ŝ 62 Ş ƃ How to set the Custom settings in the Program mode 1. Press the Menu button and select the [P] menu tab. 2. Press the Right button and select the [Custom] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. - Size - Quality - Effect - Sharpness - Voice memo - LCD[...]

ŝ 63 Ş ƈ You can change the display of the Rear LCD, Finder LCD and Top LCD. ƈ Refer to page 26 for more information about each LCD. ƃ How to change the display status - Rear LCD is on - Top LCD is on (Icon) - Finder LCD is off Pressing the LCD button Pressing the LCD button Pressing the LCD button - Rear LCD is off - Top LCD is on (Icon) - Fi[...]

ŝ 64 Ş ƈ You can check the recording status in the LCD. Pressing the Display/ Information button will change the display as shown below. ƈ Some information will not display in the AUTO, MOVIE CLIP and SCENE mode. ſ Information displayed on the Finder LCD is the same as the information on the Rear LCD. ƈ Histogram shows you the distribution of[...]

ŝ 65 Ş Sub menu Icon Description [Children] [Landscape] [Close up] [Sunset] [Dawn] [Backlight] [Firework] [Beach & Snow] ƈ Select the [Scene] submenu to automatically configure optimal settings, depending on the selected scene. ƈ If you change the camera mode, Macro (p.56), Flash (p.57), High speed shutter (p.49) and Drive mode settings (p.[...]

ŝ 66 Ş ƈ You can see the Finder LCD clearly by rotating the diopter. ƈ The range is from -4 to +2 dpt. ƃ Diopter 1. Select the Finder LCD by pressing the LCD button (p.63). 2. While looking though the Finder LCD, rotate the diopter to the left or the right. 3. When you can see the Finder LCD clearly, adjustment is complete. Diopter[...]

ŝ 67 Ş ƈ You can use the menu on the LCD to set up recording functions. ƈ The following functions are available, depending on the mode you have selected. The items indicated by are default settings. ƃ The menu will not be displayed on the LCD monitor in the following circumstances : - When another button is being operated. - While image data i[...]

ŝ 68 Ş Main menu Sub menu Camera working mode Page Normal B & W Sepia Negative Contrast +2 ~ 0 ~ -2 Saturation +2 ~ 0 ~ -2 Soft Normal Vivid Off One Pic All Pics Interval/Time 1 ~ 60 min Interval/Number 2 ~ 99 pics Sharpness sRGB Adobe RGB Myset 1 Myset 2 Myset 3 Myset 1 Myset 2 Myset 3 Sharpness Voice memo p.72 p.73 p.74 p.75 p.76 p.39 p.62 [...]

ŝ 69 Ş Main menu Sub menu Camera working mode Page 1st Curtain 2nd Curtain Auto Manual Off On Center Focus Area * Menus are subject to change without prior notice. p.58 p.57 p.48 p.79 Flash Synchro. Flash Pop-up Direct MF Spot AE Point Using the LCD monitor to adjust the camera settings[...]

ŝ 70 Ş ƈ You can select the image size appropriate for your application. With Menu button With Jog dial Icon 3264X2448 L 3264X2176 3:2 3264X1840 16:9 2400X1800 M1 1632X1224 M2 1024X768 S1 640X480 S2 640X480 640 320X240 320 160X120 160 Still image Movie clip ƃ The higher the resolution, the lower the number of available shots will be because hig[...]

ŝ 71 Ş ƈ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode Icon RAW TIFF Sub menu RAW TIFF S. Fine Fine Normal 25 FPS 15 FPS File format dng tif jpeg jpeg jpeg avi avi Still image mode Movie clip mode ƃ A RAW file contains the origi[...]

ŝ 72 Ş ƈ By using the camera’s digital processor, it is possible to add special effects to your images. [Normal] : No effect is added to the image. [B & W] : Converts the image to black and white. [Sepia] : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). [Negative] : Saves the image in negative mode.[...]

ŝ 73 Ş ƈ You can change the distinction between light and dark parts of images. ƈ You can make images with marked differences in light and shadow softer, and those with less differences more vivid. ƃ How to set the contrast in the Program mode 1. Press the Menu button and select the [P] menu tab. 2. Press the Right button and select the [Contr[...]

ŝ 74 Ş ƈ You can change the saturation of images. ƃ How to set the saturation in the Program mode 1. Press the Menu button and select the [P] menu tab. 2. Press the Right button and select the [Saturation] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired menu by pressing the Up/ Down button. - Setting range :[...]

ŝ 75 Ş ƈ You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD before you take a picture, because this function is applied only when the captured image is stored in the memory. Sub menu Icon Description The edges of the image are softened. This effect is suitable for editing images on your[...]

ŝ 76 Ş ƈ You can add your voice-over to a stored image. ƃ Recording a voice memo in the Program mode 1. Press the Menu button and select the [P] menu tab. 2. Press the Right button and select the [Voice Memo] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired menu by pressing the Up/ Down button. - [Off] : canc[...]

ŝ 77 Ş ƈ You can select how the colours are reproduced (sRGB, Adobe RGB) on the monitor or printer. ƈ Adobe RGB has more colour spectra than sRGB and it is suitable for printing and computer graphics. ƃ How to set the Colour space in the Program mode 1. Press the Menu button. and select the [P] menu tab. 2. Press the Right button and select th[...]

ŝ 78 Ş ƈ Use the MySET mode to save frequently used camera settings (Save Myset) and use it later (Load Myset). ƃ Saving the camera configuration : Available in the PROGRAM, A, S, M shooting mode and MySET mode. 1. Use the camera buttons and menu to set the desired camera configuration. 2. Press the menu button in any mode except AUTO, MOVIE CL[...]

ŝ 79 Ş Flash Synchro. Flash Pop-up Direct MF Spot AE point Size Quality Effect Center Focus Area ƈ You can select a spot AE point where the brightness is calculated. ƃ How to set the spot AE point in the Program mode 1. Select the spot metering mode (p.43). 2. Press the Menu button and select the [P] menu tab. 3. Press the Right button and sele[...]

ŝ 80 Ş ƈ Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. ƈ If you have turned on the camera by pressing the POWER button, you can press the PLAY MODE button once to switch to Play mode and press it again to switch to Recording mode. ƈ You can turn the p[...]

ŝ 81 Ş ƈ Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the Left/ Right button. 4. Press the Play & Pause button ( ) to play back a movie clip file. - To play back or pause a movie clip. Press the Play & Pause button. - To re[...]

ŝ 82 Ş ڼ ڽ ھ ڿ ۀ ہ ۄ ؅ ۇ ۅ ۆ ؆ ؇ ؈ ڻ ں ڹ ؉ No. Description Icon Page 1 Image size p.70 2 Metering p.43 3 Battery status p.17 4 Date 2005.07.01 p.117 5 Time 13:00 PM p.117 6 Contrast p.73 7 Saturation p.74 8 Quality p.71 9 Sharpness p.75 10 Focal Length 28mm p.44 11 Exposure compensation p.50 ƈ The LCD displays shooting informat[...]

ŝ 83 Ş 12 Flash p.57~60 13 Macro p.55~56 14 White balance p.53~54 15 ISO p.42 16 Aperture value F2.2 p.30~31 17 Shutter speed 1/30 p.30~31 18 Colour space p.77 19 Play mode p.80 20 Folder name and Stored image number 100-0009 p.112 No. Description Icon 1 Play mode 2 Battery status 3 Remote control Top LCD ڹ ں ڻ LCD monitor indicator[...]

ŝ 84 Ş ƈ In Play mode, you can use the buttons and the jog dial on the camera to conveniently set up the Play mode functions. ƈ You can view multiple pictures, enlarge a selected picture, and crop and save a selected area of an image. ƃ Thumbnail display 1. While an image is displayed full screen, press the Thumbnail button ( ). 2. The thumbna[...]

ŝ 85 Ş ƃ You can tell whether the image displayed is an enlarged view by checking the image enlargement indicator shown at the bottom left of the LCD. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement. ƃ RAW, TIFF and Movie clip files can’t be enlarged. ƃ If an image is en[...]

ŝ 86 Ş ƈ The shooting and playing back information will be displayed on the LCD. The last image stored in the memory is displayed on the LCD by pressing the play mode button. ƈ Pressing the Display/ Information button( ) in the PLAY mode will change the display as shown below. ƈ Refer to page 82 for more information about the shooting informat[...]

ŝ 87 Ş ƈ You can organise the captured still images into albums. ƈ This camera has 8 albums and each album can take up to 100 images. ƈ The album menu loading time depends on the memory card type. ƈ How to use the album ƃ Selecting the album 1. In the play mode, press the Album (Up) button. 2. Select the [ ] menu by pressing the Up/ Down but[...]

ŝ 88 Ş 3. Select the still images you wish to add by pressing the Up/ Down/ Left/ Right buttons and rotate the Front jog dial (JOG1). V marks are displayed on the selected images. * To cancel the selection, rotate the Front jog dial (JOG1) again. 4. Press the OK button and a confirmation window will display. Select a desired sub menu by pressing [...]

ŝ 89 Ş ƃ If an image is deleted from the memory, the image doesn’t display on an album. ƃ An image can’t be added twice into the same album. ƃ An image can be added into the different albums. INFORMA TION ƃ Playing back the albums Ƅ Playing back all of the albums 1. Select [ ] menu and press the OK button. All of the albums will be selec[...]

ŝ 90 Ş ƈ The 5 function button activates the following. - Up button : While the menu is showing, press the Up button to move the cursor up the menu. When the menu is not displayed on the LCD, the Up button operates as the Album button. - Down button : While the menu is showing, press the Down button to move the cursor down. If a still image with[...]

ŝ 91 Ş ƈ After connecting the camera with an external monitor, you can see the captured image by using the remote control. ƈ Remote control is optional in some countries. ƈ In play mode, you can use the remote control to set up the play mode functions. ƈ See below for operation of buttons - Enlargement button : In play mode, this button enlar[...]

ŝ 92 Ş ƈ This deletes images stored on the memory. ƃ While the delete menu is displaying, you can select a different image by pressing the Left/ Right button. ƃ Before deleting images from the camera, you should protect (p.98) or download images (p.145~146, 152~153) to your computer that you wish to keep. INFORMA TION ƃ Deleting Images in Pla[...]

ŝ 93 Ş ƈ PLAY mode functions can be changed by using the LCD monitor. Press the Menu button and select the [ Ȟ ] menu tab. The play back menu will display. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the Play mode button or shutter button. Menu tab Main menu Sub menu Secondary [...]

ŝ 94 Ş ƈ This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu tab Main menu Sub menu Secondary menu Page - - - - Auto Postcard Card 4X6 L 2L Letter A4 A3 Auto Full 1 2 4 8 9 16 Auto Plain Photo Fastphoto Auto Set Custom Set Images p.107 p[...]

ŝ 95 Ş ſ Menus are subject to change without prior notice. Quality Menu tab Main menu Sub menu Secondary menu Page Auto Draft Normal Fine Auto Off On Auto Off On Standard - Index - No - Yes - No - Yes - Print Custom Set p.108 p.108 p.109 p.107 File Name Date Print DPOF Print Reset Setting up the play back function using the LCD monitor[...]

ŝ 96 Ş ƈ Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. In play mode, press the Menu button and select the [ Ȟ ] menu tab. 2. Press the Right button and select the [Slide Show] menu by pressing the Up/ Down button. 3. Press the Right button and select a [...]

ŝ 97 Ş ƃ Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the Up/ Down button and press the Right button. 2. Use the Up/ Down button to select the type of effect. [Off] : Normal display. [Effect 1] : Image moves from the top left. [Effect 2] : The image slides diagon[...]

ŝ 98 Ş ƈ This is used to protect specific shots from being accidentally erased (Lock). It also unprotects images that have been previously protected (Unlock). ƃ How to protect images 1. In play mode, press the Menu button. 2. Select the [ Ȟ ] menu tab and press the Right button. 3. Select the [Protect] menu by pressing the Up/ Down button and [...]

ŝ 99 Ş ƈ Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera’s internal memory (i.e., not on the memory card) a[...]

ŝ 100 Ş ƃ How to add a voice to a still image 1. Select an image that you wish to add sound to by pressing the Left/ Right button. 2. Select the [ Ȟ ] menu by pressing the Menu button and press the Right button. 3. Select the [Voice Memo] menu by pressing the Up/ Down button and press the Right button. 4. Select the [On] menu by pressing the Up[...]

ŝ 101 Ş ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. In play mode, press the Menu button and select the [ Ȟ ] menu tab. 2. Press the Right button and select the [Resize] menu by pressing the Up/ Down button. 3. Press the Right[...]

ŝ 102 Ş ƈ You can rotate the stored images by various degrees. 1. In play mode, press the Menu button and select the [ Ȟ ] menu. 2. Press the Right button and select the [Rotate] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. [Right 90°] : Rotate picture in a clock[...]

ŝ 103 Ş ƈ DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. ƈ The DPOF indicator will display on the LCD when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing [...]

ŝ 104 Ş ƈ Images (except for movie clips and voice file) are printed as index type. 1. In play mode, press the Menu button and select the [ Ȟ ] menu tab. 2. Press the Right button and select the [DPOF/Index] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/Down button. If [No] is s[...]

ŝ 105 Ş ſ If you selected [Computer] in Step 4, when you connect the camera to your printer, the [Connecting Computer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 1 and onward. Video Out Quick View Auto Rotating USB Reset All File Power Off Print[...]

ŝ 106 Ş ƈ Select pictures to print 1. Connect the camera to your printer. The USB menu must be set to [Printer] before you connect the camera to the printer. (See p.105) 2. Press the Menu button and select the [ ] menu tab by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. An[...]

ŝ 107 Ş Menu Paper Size Setting the size of the printing paper Auto, Postcard, Card, 4X6, L, 2L, Letter, A4, A3 Setting the number of pictures to be printed on a sheet of paper Paper Type Setting the quality of the printing paper Auto, Plain, Photo, Fastphoto Setting the quality of the picture to be printed Date Print Setting whether to print the[...]

ŝ 108 Ş ƈ Printing Pictures Connect the camera to your printer. The USB menu must be set to [Printer] before you connect the camera to the printer. (See p.105) 1. Select the [Print] menu by pressing the Up/ Down button. 2. Press the Right button and select a desired sub menu by pressing the Up/ Down button. [Standard] : Print the pictures stored[...]

ŝ 109 Ş ƈ Initialises user-changed configurations. Connect the camera to your printer. The USB menu must be set to [Printer] before you connect the camera to the printer. (See p.105) 1. Select the [Reset] menu by pressing the Up/ Down button. 2. Press the Right button and select a desired sub menu by pressing the Up/ Down button. If [No] is sele[...]

ŝ 110 Ş ƈ In this mode, you can set up basic settings. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu Page Series - Reset - Power Off 1, 3, 5 min - p.113 LCD Off Off, 10, 20, 30, 60 sec - p.114 ENGLISH ጥૹ࿴ FRANÇAIS DEUTSCH ESPAÑOL ITALIANO ⁹᪎ᷘ P”CCK»… PORTUGUÊS DUTCH DANSK SVENSKA SUOM[...]

ŝ 111 Ş Menu tab Main menu Sub menu Secondary menu Page Okhotsk Denver, Phoenix Wellington, Auckland Chicago, Dallas Samoa, Midway New York, Miami Honolulu, Hawaii Caracas, La Paz Alaska Buenos Aires LA, San Francisco Mid-Atlantic Off Date - Date & Time Off Low Medium High Main LCD EVF Top LCD NTSC PAL Quick View Off, 0.5, 1, 3, 5 sec - Off O[...]

ŝ 112 Ş ƈ This function allows the user to select the file naming format. ƃ How to set the file names 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [File] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. [Series] : New [...]

ŝ 113 Ş ƃ Even if the battery or AC adapter are removed and inserted again, the power off setting will be preserved. ƃ Note that the automatic power off function will not operate if the camera is in PC mode, slide show, interval shooting and playing back a movie clip. INFORMA TION ƃ How to set the Auto power Off 1. Press the Menu button and se[...]

ŝ 114 Ş ƃ Even if the battery or AC adapter are removed and inserted again, the auto LCD turn off setting will be preserved. ƃ Note that the automatic LCD off function will not operate if the camera is in PC mode, slide show, interval shooting and playing back a movie clip. INFORMA TION ƃ How to set the auto turn off time 1. Press the Menu but[...]

ŝ 115 Ş ƃ How to set the language 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Language] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S. Chin[...]

ŝ 116 Ş ƃ How to format the memory card 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Format] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. If [No] is selected : The memory card will not be formatted. If [Yes] is sel[...]

ŝ 117 Ş ƈ You can change the date and time that will be displayed on the captured images. ƃ How to set the Date & Time 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Date & Time] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the [...]

ŝ 118 Ş ƈ You can check the time of cities of various nations. ƃ How to check the time 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [World Time] menu by pressing the Up/ Down button. 3. Press the Right button and a world map will display as shown alongside. - Left/ Right or Rear jog dial (JOG2) [...]

ŝ 119 Ş ƈ There is an option to include Date/Time on still images. ƃ How to imprint the date & time 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Imprint] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu. [Off] : The DATE & TIME will not be im[...]

ŝ 120 Ş ƈ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. ƃ How to set the sound 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Sound] menu by[...]

ŝ 121 Ş ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƃ How to set the video out type 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the[...]

ŝ 122 Ş ƈ If you enable Quick View before capturing an image, you can view the image you just captured on the LCD for the duration set in the [Quick View] setup. Quick view is possible only with still images. ƃ How to set the quick view 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Quick View] m[...]

ŝ 123 Ş ƈ When an image taking vertically plays back, the auto rotating sensor will rotate the image correctly. ƈ You can view the reversed image correctly without rotating the image. ƃ How to set the auto rotating sensor 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Auto Rotating] menu by pres[...]

ŝ 124 Ş ƈ You can select an external device to which you want to connect the camera using the USB cable. ƃ How to set the external device 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [USB] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing t[...]

ŝ 125 Ş ƈ You can set up a start up image, start up sound, shutter sound and sound effect. The items indicated by are default settings. * Menus are subject to change without prior notice. Menu tab Main menu Sub menu Page Off Logo User Image - Off Sound 1 Sound 2 Sound 3 Off Shutter 1 Shutter 2 Shutter 3 Off Effect 1 Effect 2 Effect 3 Start Image[...]

ŝ 126 Ş ƃ How to set the start up image 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Start Image] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. 4. Press the OK button to set the setting. ƈ You can select the image [...]

ŝ 127 Ş ƈ You can select the shutter sound. ƃ How to select the shutter sound 1. Press the Menu button and select the [ ] menu tab. 2. Press the Right button and select the [Shutter Sound] menu by pressing the Up/ Down button. 3. Press the Right button and select a desired sub menu by pressing the Up/ Down button. 4. Press the OK button to set [...]

ŝ 128 Ş Be sure to observe the following precautions! ƈ This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. - Envi[...]

ŝ 129 Ş ƈ Caution on Using the Lens - If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of the image sensor. - Pay attention not to get fingerprints or foreign substances on the surface of the lens. ƈ If the digital camera is not used for a long period, an electric discharge can occur. It is a good [...]

ŝ 130 Ş ƈ There are several warnings that may appear on the LCD display. Card Error ! ϛ Memory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card (p.116) No Card ! ϛ A memory card is not inserted ƍ Insert a memory card ϛ The camera can’t recognis[...]

ŝ 131 Ş Set USB ϛ [USB] sub menu and connected device are not matched. ƍ Reconfigure [USB] in the [Setup] menu. Out Of Number ϛ When selecting too many printing pages in the PictBridge menu. ƍ Select printing page within the limitation. ƈ Please check the following The camera doesn’t switch on ϛ There is low battery capacity. ƍ Insert ch[...]

ŝ 132 Ş Camera does not take images when pressing the Shutter button ϛ There is insufficient memory capacity. ƍ Delete unnecessary image files ϛ The memory card has not been formatted ƍ Format the memory card (p.116) ϛ The memory card is exhausted ƍ Insert a new memory card ϛ The camera’s power is off ƍ Turn the camera power on ϛ The b[...]

ŝ 133 Ş The images don't play back ϛ Incorrect file name (Violation of DCF format) ƍ Do not change the image file name Colour of image is different to the original scene ϛ White balance or effect setting is incorrect ƍ Select appropriate White balance and effect Images are too bright ϛ Exposure is excessive ƍ Reset exposure compensatio[...]

ŝ 134 Ş Type 2/3 " CCD Effective Pixel Approx. 8.0 Mega-pixel Total Pixel Approx. 8.3 Mega-pixel Schneider Lens f = 7.2 ~ 108.0mm (35mm film equivalent : 28~420mm) F No. F2.2 ~ F4.6 Still Image mode : 1.0X, 2.0X, 4.0X Play mode : 1.0X ~ 10.2X (depends on image size) Electronic Viewfinder 0.44 " color TFT LCD (235,000 dot) Main : 3.5 &qu[...]

ŝ 135 Ş With stereo audio (recording time : memory capacity dependent) (640X480 and 25fps : up to 30 sec.) Size : 640x480, 320x240, 160x120 Frame rate : 25 fps, 15 fps CompactFlash Card Type I or Type II (Up to 4GB guaranteed) Still Image : RAW(DNG), TIFF, JPEG (DCF), EXIF 2.2, DPOF 1.1, PictBridge 1.0 Movie Clip : AVI (MJPEG) Audio : WAV L : 326[...]

ŝ 136 Ş Please ensure that you read the instruction manual carefully before use. ϛ The attached software is a camera driver and image editing software tool for Windows. ϛ Under no circumstances should all or part of either the software or the user manual be reproduced. ϛ Copyrights for software are licensed only for use with a camera. ϛ In th[...]

ŝ 137 Ş After inserting the software CD provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ƈ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the cam[...]

ŝ 138 Ş To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean 1. Cli[...]

ŝ 139 Ş 6. A window where you can choose the program you want to install will appear. Click the [Install] button. For information on application software, please refer to page 137. 7. The Digimax Master installation window will be displayed as shown alongside. Click the [Next >] button. 4. A window will open. Click the [Next(N) >] button. 5[...]

ŝ 140 Ş 8. A window will open. Click the [Next >] button. 9. A destination selection window will open. Click [Next >]. To copy the files to another folder, click [Browse..] and choose a folder you want. 11. Click [Install(I)] button and Digimax Master starts installing. 10. A window will open, asking you to choose a folder to which program [...]

ŝ 141 Ş 13. A window will be displayed as shown alongside. Click the [INSTALL] button. - If you click the [Manual] button instructions, instructions for using Digimax reader will be displayed. - Click the [EXIT] button and the Digimax reader installation will be cancelled and a window for restarting the computer will appear. 14. A window will ope[...]

ŝ 142 Ş 16. A destination selection window will open. Click the [Next >] button. To copy the files to another folder, click [Browse...] and choose a folder you want. 17. Digimax Reader Installation is completed. The system will not reboot even if the [Yes, I want to restart the computer now] option is selected. ſ The screen shot of step 17 ca[...]

ŝ 143 Ş ƃ If you have installed the camera driver, The [Found New Hardware Wizard] may not open. ƃ On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied. (for Windows 98 and 98 SE). ƃ Before conn[...]

ŝ 144 Ş Ү If you connect the USB cable to a USB port on your PC and then turn on the power, the camera will automatically switch to "computer connection mode". Ү In this mode, you can download stored images to your PC through the USB cable. Ү The LCD monitor is always turned off in PC mode. Ү The Card in use lamp will blink when the[...]

ŝ 145 Ş 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click the [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit the[...]

ŝ 146 Ş 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files. Starting PC mode[...]

ŝ 147 Ş ƈ To remove the USB driver, refer to the process shown below. 1. Click [Start ƍ Settings] and click [Control Panel]. 4. Click the [OK] button. The camera is removed from the system. 2. Double-click [System]. 3. Select [Device manager ƍ Hard Disk Controller ƍ Samsung Digital Camera] and click the [Remove] button. [Click !] Removing the[...]

ŝ 148 Ş 5. Trace [Start ƍ Settings ƍ Control Panel] and double click [Add/Remove programs]. 6. The [Add/Remove Programs Properties] window will open. Click [Pro 815] and click the [Add/Remove] button. 7. Uninstallation is complete. Click the [Finish] button and the window will disappear. [Click !] [Click !] Removing the USB Driver for Windows 9[...]

ŝ 149 Ş ƈ To use this camera as a Removable Disk, install (p.138) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My Computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM ƍ 100SSCAM) can be transferred to the PC. Important infor[...]

ŝ 150 Ş [Click !] [Double-click!] [Click !] ƈ Windows 98/98SE 1. Check whether the camera and PC is transferring a file. If the Card in use lamp blinks, you have to wait until the lamp is turned off. 2. Unplug the USB cable. ƈ Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Windows O/S.) 1. Ch[...]

ŝ 151 Ş 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. This camera is compatible with MAC OS 10.0 or later. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the desktop after connecting the camera to the MAC. Using the U[...]

ŝ 152 Ş ƈ You can download, view, edit and save your digital images and movies with this software. This software is only compatible with Windows except for the Windows 98. ƈ To start the program, click [Start ƍ Programs ƍ Samsung ƍ Digimax Master]. ƃ Downloading images 1. Connect the camera to your PC. 2. A window for downloading images wil[...]

ŝ 153 Ş 7. Downloaded images will be displayed. 4. Select a destination and make a folder to save downloaded images and folders. - Folders will be made in order of date and images will be downloaded. - Folder names can be made as you want and images will be downloaded. - After selecting a folder that was made before, images will be downloaded. 5.[...]

ŝ 154 Ş ƃ Image viewer : You can view the stored images. - Image viewer functions are listed below. ڹ Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ں Image selection window : You can select the desired images in this window. ڻ Media type selection menu : You can select image viewer, imag[...]

ŝ 155 Ş - Image edit functions are listed below. ڹ Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or insert effects on the image. See the [Help] menu. ں Drawing tools : Tools f[...]

ŝ 156 Ş ƃ DNG converter : You can convert a RAW (*.dng) file into a JPEG or TIFF file format. - DNG converter functions are listed below. ڹ Histogram display : Histogram of displayed image will be displayed. ں Tools : You can edit the RAW (*.dng) files as you want [White Balance] : You can edit the colour temperature and saturation of the imag[...]

ŝ 157 Ş - Movie clip edit functions are listed below. ڹ Edit menu : You can select the following menus. [Add Media] : You can add other media elements to a movie. [Edit Clip] : You can change the brightness, contrast, colour and saturation. [Effects] : You can insert an effect. [Set Text] : You can insert texts. [Narrate] : You can insert a narr[...]

ŝ 158 Ş ƈ Digimax Reader is a Text recognition program. You can save an image file that is captured in the Text mode, as a text file with this program. This software is only compatible with Windows. ƈ To start the program, click [Start ƍ Programs ƍ Digimax Reader]. The following screen will appear. ƈ How to use the Digimax Reader 1. Connect [...]

ŝ 159 Ş 4. Select the image you want to save as a text file. * Only an image that was taken with a SAMSUNG camera can be opened. 5. Click the Area Analysis( ) icon to scan the image. 6. Part of the image you selected will be displayed as shown. 7. Click the Character Recognition( ) icon. The part selected in the previous step will be recognized a[...]

ŝ 160 Ş ƃ To get an image that can be recognized as a text : - Keep a distance that you can capture the image clearly between the subject and the camera. - The subject need to be centered. - Avoid camera shake to get a good image. ƃ Refer to the [Help] menu in Digimax Reader for further information. INFORMA TION 9. Select the file type that you[...]

ŝ 161 Ş [Case 5] There is an unexpected error during file transfer ƍ Turn the camera power off and on again. Transfer the file again. [Case 6] How do I know my computer supports a USB Interface? ƍ Check the USB port in your computer or keyboard. ƍ Check the OS version. A USB Interface is available in Windows 98, 98SE, 2000, ME, XP. ƍ Check [U[...]

ŝ 162 Ş ƈ When the movie clip doesn’t play back on the PC ſ When the movie clip recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC. ƃ When the DirectX 9.0 or later is not installed ƍ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows exp[...]

ŝ 163 Ş ƈ If a PC (Windows 98) stops responding while the camera and PC are connected repeatedly ƍ If a PC (Windows 98) is turned on for a long time and the camera is connected repeatedly the PC may not recognise the camera. In this case, re-start the PC. ƈ If a PC connected with the camera stops responding while Windows is starting. ƍ In thi[...]

6806-2787 SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : [...]