Samsung SSC-2000 инструкция обслуживания

System Keyboard SSC-2000 User's Manual GB F D ES I R P[...]

This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product. This symbol alerts you that important litera- ture concerning operation and maintenance has been included with this product. T o prevent damage which may result in fire or electric shock hazard, do not expose this [...]

Contents Chapter 1. General Facts ........................................................gb-3 Introduction ............................................................gb-3 Features ..................................................................gb-3 Name and function of each part ............................gb-3 Chapter 2. Installation .........[...]

GB-4 B. Camera movement key - PRESET - P A TTERN - SCAN - AUTO P AN C. Alarm release key D. Joystick controller (UP/DOWN/LEFT/DOWN/AF/ZOOM) The Pan/T ilt connected with Samsung Dome Camera or Receiver Unit is moved to UP/DOWN/LEFT/RIGHT . Press the button on the top of Joystick to control the Auto Focus. And use for the zoom control by turning to t[...]

• Be sure to check dangers, which may occur due to damped floor , ungrounded power extension cable, worn power cord or lack of safety grounding. Caution When cleaning this unit, be sure to wipe with a dried cloth. If the unit is heavily contaminated, wipe it with a soft cloth dampened with a mild detergent solution, then wipe dry with a soft clea[...]

GB-6 • In case of connecting with Full Duplex - Connect the Txd (+) of Dome Camera RS-485 port with the Rx (+) of SSC-2000. - Connect the Txd (-) of Dome Camera RS-485 port with the Rx (-) of SSC-2000. - Connect the Rxd (+) of Dome Camera RS-485 port with the Tx (+) of SSC-2000. - Connect the Rxd (-) of Dome Camera RS-485 port with the Tx (-) of [...]

GB-7 7) Connecting PC based DVR (Applicable to the SPR Smart View V2.3 over) - Connect SSC-2000 through the RS-485 port in the back of PC BASED DVR. - Connect SIGNAL (+) in the RS-485 port of PC BASED DVR with Tx (+) of SSC-2000. - Connect SIGNAL (-) in the RS-485 port of PC BASED DVR with Tx (-) of SSC-2000. Connecting PC by RS-232 Connect a PC in[...]

GB-8 Chapter 4. Instructions Log-in 1. T urn on the power of all the components of the system. 2. When the power is applied by connecting the power adapter at the back of system keyboard, the following indication is displayed on the LCD screen. 3. Using the keypad of the touch screen or the number key of the keyboard, enter the registered Operator [...]

GB-9 P A TTERN movement This function is to view the camera movement for 30 seconds desig- nated by the user on the pattern mode of the camera menu. Press the pattern button on the keyboard, enter the pattern number(1~3) you want, and press “ENTER” to execute P A TTERN movement. “P A TTERN 1” will appear on the screen. • If there is any o[...]

English small letter input page will appear . Press “TEXT” if you want to enter large letters. Press “NUMBER” if you want to enter numbers. Press “SYMBOL” if you want to enter symbols. Press a word at a time until you complete the title you want. Maximum 14 characters can be entered. Press “Back” to delete the last word. Press “Sp[...]

CAMERA MENU Press the “SETUP” ICON on left below to control the menu of the selected camera. Using the direction key and the enter key , control the CAMERA MENU. Press the EXIT ICON to clear the camera menu. • When you control the menu of SAMSUNG DOME CAMERA, you can use the joystick as a direction or enter key by moving it or after pressing [...]

MUX channel selection 1. Press the “CH” ICON below on the MUX screen. 2. A channel selection screen will appear as shown below . 3. Select the channel you want. 4. Press the EXIT ICON on the lower right to finish selecting and return to the MUX control screen MUX MENU Press the setup icon on the lower left to control the menu of the selected MU[...]

ADDRESS SET The address of the system keyboard can be set. Press “ADDRESS SET” and the keyboard address input window will appear as shown below . Enter the address by using the number keys and press the enter key . Press enter the “EXIT” ICON on lower left if you want to clear the window without entering the address. • The ADDRESS of the [...]

P ARITY CHECK The P ARITY BIT of RS-232 communication can be set. Press “P ARITY CHECK” and a pop-up window will appear as shown below . Select one among None / Odd / Even. STOP BIT The STOP BIT of RS-232 communication can be set. Press “STOP BIT” and a pop-up window will appear as shown below . Choose one between 1 / 2. CHANGE P ASSWORD Th[...]

- Operator No. : Newly registered use's number - Password : New password is displayed.( ****** ) - Operator Level : The level of the new user can be set. Operator Level Press “Operator Level” to set the level. Y ou can choose one level among Admin. / Manager / Operator . • DEF AUL T OPERA TOR LEVEL is OPERA TOR level. Please refer to the[...]

UPLOAD progress screen When you press “OK” on the UPLOAD check screen, UPLOAD progress screen will appear as shown below . ‘Complete’ message will appear when uploading is completed. SYSTEM INFORMA TION AND SETUP - S/W V ersion : Present version. Setup impossible. - Factory Default Setup : Reset all the menu values to the initial default va[...]

Chapter 7. Product Specification ITEM DESCRIPTION INTERF ACE (RS-485) CONNECTOR TYPE : 4P TERMINAL TYPE POR T : 1 POR T BAUD RA TE : 4,800/9,600/19,200/38,400bps INTERF ACE (RS-232C) CONNECTOR TYPE : D-SUB 9P POR T : 1 POR T BAUD RA TE : 600/1,200/2,400/4,800/ 9,600/19,200/38,400/57,600bps LCD P ANEL 5.7” GRAPHIC P ANEL (320X240line) + TOUCH P AN[...]

GB-18[...]