Sanyo VCC-3912 инструкция обслуживания

INSTRUCTION MANUAL COLOR CCD Camera VCC-3912 L53L 2/US G B 1995 , 11, 1[...]

1AC6P1P0866-- L53L2/US (1095SY) 21350 Lassen Street, Chatsworth, CA 91311 Printed in Japan SANYO INDUSTRIAL VIDEO COLOR VIDEO CAMERA LIMITED WARRANTY OBLIGATIONS In order to obtain warranty service, the product must be delivered to and picked up from an Authorized Sanyo Service Center at the user’s expense, unless specifically stated otherwise in[...]

CONTENTS ACCESSORIES .................................................... 1 INFORMATION TO USER .................................. 2 FEATURES .......................................................... 3 PRECAUTIONS ................................................... 4 PREPARATION ................................................... 5 CONNECTIONS ...[...]

Safety Guard THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THIS UNIT. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ENGLISH INFORMATION TO USER For the customers in Canada This Cla ss B digi tal appar at us mee ts all [...]

FEATURES Electronic iris function The electronic iris function regulates the electronic shutter speed. To the contrary of electronic shutters with a fixed speed, the electronic iris modifies the shutter speed according to the CCD input. The electronic iris will automatically control the amount of light entering the camera, so manual iris lenses can[...]

PRECAUTIONS In case of problem Do not use the camera if smoke or a strange odor comes from the unit, or if it seems not to function correctly. Disconnect the power cord immediately, and consult your dealer (or a Sanyo Authorized Service Center). Do not open or modify Do not open the cabinet, as it may be dangerous and cause damage to the unit. For [...]

PREPARATION Camera installation A: Lens mount cap Remove the lens mount cap before installing the lens (sold separately). • Use with t his cam era a CS m ount type auto-iris lens (for 1/3 inc h) . Auto- iris len ses regu late the amount of light entering the camera according to the brig htness of the su bject. • C m ount auto- iris lens es c an[...]

Installation of a DC type lens (sold separately) 1/3 inch CS mount type (Flange-back: 12.5 mm) 1 Remove the lens mount cap. 2 Install the auto-iris lens onto the camera. Sanyo auto-iris lenses (sold separately) • VCL-C S8LY: S tandard angle, f = 8 mm • VC L-CS4LY: Wide angle, f = 4 m m • VCL-CS 2LY: Ultra- wide angle, f= 2. 8 mm CAUTION: Do n[...]

PREPARATION Installation of a VIDEO type lens (sold separately) 1/2 or 2/3 inch C mount type (Flange-back: 17.526 mm) 1 Remove the lens mount cap. 2 Attach the supplied C mount adaptor to the auto-iris lens. 3 Install the auto-iris lens onto the camera. CAUTION: Do not use a lens if the length “ L ” is more than 5 mm. That may damage the camera[...]

CONNECTIONS Basic connection for monitoring or recording The peripheral devices (VCR, monitor, etc.) and cables are sold separately. 1 Make the video signal connection between the camera and the monitor or time lapse VCR. 2 Connect DC connecting cord from the AC adaptor to the 12V DC IN terminal on the camera. 3 Plug the AC adaptor into an AC outle[...]

CONNECTIONS Multiple camera connections The following two connections can be used when using 4 monitoring cameras. The power connection is as described on page 8, and should be realized for each camera. The peripheral devices (VCR, monitor, multi-video processor, camera switcher, etc.) and cables are sold separately. A) Connection using a multi-vid[...]

SETTINGS The switches setting illustrated are the factory default settings. A: Flange-back adjustment If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the flange-back position[...]

SETTINGS C: White balance adjustment Normally the WB (white balance) switch is set to the A (automatic) position and the white balance is adjusted automatically. If a manual white balance adjustment is necessary, follow the steps below. Set the WB switch to the M (manual) position, then adjust the color. • Turn R (VR403) to set the red ratio and/[...]

If using a VIDEO type auto-iris lens • The ALC volume on the lens should be turned all the way to Av (Average). • If the backlight compensation function does not compensate properly for the conditions, set using the LEVEL volume on the lens. CAUTION: The electronic iris function and the backlight compensation function cannot operate simultaneou[...]

TROUBLESHOOTING Before taking the camera for repairs, please check below to make sure that the camera is used correctly. If it still does not perform correctly, please consult your dealer or a Sanyo Authorized Service Center. No picture on the monitor screen • Is the power turned on to all connected devices? Is the voltage correct? • Are all th[...]

SPECIFICATIONS Camera Color system : NTSC color TV system (525 TV lines, 60 fields/sec.) Interlace : PLL 2:1 interlace Image device : 1/3 inch interline transfer CCD Picture elements : 537 (H) x 505 (V) Effective picture elements : 510 (H) x 492 (V) Synchronizing system : Internal sync Resolution : 330 TV lines horizontally, 350 TV lines vertically[...]