Sanyo VSP-9000 инструкция обслуживания

INSTRUCTION MANUAL System Controller VSP-9000 About this manual • Before installing and using this unit, please read this man ual carefully . Be sure to k eep it handy for later reference . • This manual giv es basic connections and operating instructions.[...]

English 1 Introduction Table of Co ntents Precautions (For UL) ...................................2 Safety Cau tions..... .... ....... ...... .... ...... ....... .... .3 Major Charac teristics ...... .... ...... ...... ....... .... .8 Accessories........................ ..................... .....8 Part Names ...... ...... ...... ....... .... .....[...]

English Introduction 2 Precautions (F or UL) CAUTION: Changes or modifications not expressly approv ed by the manuf acturer may void the user 's authority to operate this equipment. This equipment has been tested and found t o comply with the limits for a Class B digit al device, pursuant to part 15 of t he FCC Rules. These limits are designed[...]

English 3 Introduction Safety Cautions Main Unit WARNING b b b b Never use when unit emits smoke, unusual noises, or un usual smells. Using under these abnormal conditions can cause fires and electric shock. Immediately unplug the AC adapter power plug from the outlet, confirm t hat the smoke stops, and then request repairs from the installer or th[...]

English Introduction 4 Safety Cautions CAUTION b b b b Transport with care Unplug the AC adapter power plug from the outlet, confirm that connection cables are disconnected, and transport carefully to avoid dropping the unit or su bjecting it to seve re s hoc k. b b b b Cautions for care or long-term disuse Unplug the AC adapter power plug from the[...]

English 5 Introduction Safety Cauti ons (Continued) Provided AC Adapter WARNING b b b b Use only the provided AC adapter Use the prov ided AC adapter. Using a different AC adap ter can cause fires or electric shock, due to differences in po wer cord current capac ity. b b b b Never touch the AC adapter with wet hands This can c ause electric shock.[...]

English Introduction 6 Safety Cautions CAUTION b b b b Do not co nnect t o other equipme nt The provided AC adapter is exclusively for this unit. Connecting to ot her equipment can cause f ires or electric shoc k. b b b b Power cord Damaging the po wer cord in the following manner can cause fires or electric shock. When the power cord is damaged, c[...]

English 7 Introduction Safety Cauti ons (Continued) Always Observ e These Rules for Proper Use b b b b Trademark Brands and product names described in this document ar e trademarks or registered trademarks of their respective companies. b b b b When no t using for l ong per iods Unplug the power plug from t he outlet. However, this could damage the[...]

English Introduction 8 Major Characteristics • Use joystick for pan/tilt/zoom operations • Select your language • Wide- range contr ol of high-s peed dome cameras and receivers • Automatically test commu nication channels • RS485 communication line b b b b Security • Communication err ors and warning buz zers • Three-stage passwords a[...]

English 9 Preparation Part Names 1 Menu Display (P1 1) When the unit is turned on, the main menu is displayed. Press the buttons in the menu to display setup screens, etc. to access s ettings and operate the unit. 2 Joystick This pans, tilts, and zooms the camera. It is also used to init ialize the touch screen and to exit graphics settings. 3 Cont[...]

English Preparation 10 Part N ames 1 Power te rminal Connect the DC terminal on the AC adapter provided. 2 Dip swi tch (S W) Used for PC settings, communication settings, or terminate settings on this unit. 3 PC connection terminal (COM: RS-232C) Use for connect ing to a PC. Install software on the provided CD-R OM to a connected P C to add other l[...]

English 11 Preparation Menu Display CAM 1 DVR 1 CAM 1 DVR 1 SEQ ON PA N ON TOUR ON SEQ/ P AN/ TOUR OFF ONE PUSH AF FOCUS FAR FOCUS NEAR IRIS CENTER GO TO PRESET TO SUB SCREEN SYSTEM SETUP MAP ENTER IRIS IRIS ADDRESS ? DVR MUX ADDRESS ? esc i SERVICE GENERAL INFORMATION GENERAL INFORMATION UNDER SELECTION UNDER SELECTION Present camera.......: 00001[...]

English Preparation 12 System Informatio n Press the button to display the current ini tial setting s informat ion for this uni t. These settings change when c ommunicat ion line settings have b een chan ged i n System Setup. 1 Status of selecte d equipment (UNDER SELECTION) • Present camera (00001) Currently selected camera channel • Camera ad[...]

English 13 Preparation Sample System Conn ection A When co nnected to vid eo communi cation term inal (VIDEO) P15 B When co nnected to vid eo communi cation term inal (VIDEO) P18 C When co nnected to vid eo communi cation term inal (VIDEO) and camera communication te rminal (TELEMETRY A) P21 VIDEO AB TELEMETRY CARD CARD MENU RESET EJECT Modular cab[...]

English Preparation 14 Sample System Connection D When co nnected to vi deo communica tion termin al (VIDEO) and camera communica tion terminal (TELEMETRY B) P24 E When co nnected to vi deo communica tion termin al (VIDEO) and camera communicati on terminal s (TELEME TRY A/B) P27 CARD CARD MENU RESET EJECT B VIDEO AB TELEMETRY Modular cable (Compet[...]

English 15 Preparation Connectio n and Comm unicatio n Setup 1 A When co nnected to vid eo communi cation term inal (VIDEO) b b b b Connecting communication conve rsion connectors RS-485 MONITOR OUT MAIN A 1 IN 2 B VIDEO COM SW ON 1 234 AB TELEMETRY 12V 3 1 2 1 2 3 3 3 Dome camera (sold separately) Zoom camera (sold separately) Hard disk digital re[...]

English Preparation 16 Connection and Communication Setup 1 b b b b Making Connections 1 1 1 1 Connect this unit to equipment for communication and operation. Before connecting, make sure all equipment is turned off. 2 2 2 2 Terminate Setup. SW1: OFF (Fixed) SW2: OFF (For Cam era A) SW3: OFF (For Cam era B) SW4: ON (For Video) 3 3 3 3 Connect this [...]

English 17 Preparation Connection and Communication Setu p 1 (continued) Check Setup: • Type : To operate a hard disk digital recorder with a multiplexer function, this s hould display “ DVR/MUX ” . • Protoco l: When “ DVR /MU X ” is s elected for “ Type ” , “ SANYO DVR/MU ” is automatically displayed. • Baudrate: “ 19200 ?[...]

English Preparation 18 Connectio n and Comm unication Setup 2 B When co nnected to vi deo communica tion termin al (VIDEO) RS-485 MONITOR OUT MAIN A 1 IN 2 B VIDEO COM SW ON 1 234 AB TELEMETRY 12V 3 1 2 1 2 3 3 3 Dome camera (sold separately) Zoom camera (sold separately) Zoom camera (sold separately) Zoom camera (sold separately) Hard disk digital[...]

English 19 Preparation Connection and Communication Setu p 2 (continued) b b b b Making Connections 1 1 1 1 Connect this unit to equipment for communication and operation. Before co nnecting, make sure all equipment is turned off. 2 2 2 2 Terminate Setup. SW1: OFF (Fixed) SW2: OF F (For Came ra A) SW3: OF F (For Came ra B) SW4: ON (For Video) 3 3 3[...]

English Preparation 20 Connection and Communication Setup 2 Check Setup: • Type : To operate a hard disk digital recorder with a multiplexer function, this should display “ DVR/MUX ” . • Protocol : When “ DVR/MUX ” is selected for “ Type ” , “ SANYO DVR/MU ” is automat ically displayed. • Baudrate: “ 19200 ” is automatical[...]

English 21 Preparation Connectio n and Comm unicatio n Setup 3 C When connected to video communication terminal (VIDEO) and camera communication terminal (TE LEMETRY A) b Connecting communication conversion connectors (Figure 1) b Connecting communication conversion connectors (Figure 2) Green Red (A) (B) Yellow Yellow White White WH B L S L O R B [...]

English Preparation 22 Connection and Communication Setup 3 b b b b Making Connections 1 1 1 1 Connect this unit to equipment for communication and operation. Before connecting, make sure all equipment is turned off. 2 2 2 2 Terminate Setup. SW1: OFF (Fixed) SW2: ON (For Camera A) SW3: OFF (For Cam era B) SW4: ON (For Video) 3 3 3 3 Connect this un[...]

English 23 Preparation Connection and Communication Setu p 3 Check Setup: • Type : To operate a hard disk digital recorder with a multiplexer function, this s hould display “ DVR/MUX ” . • Protoco l: When “ DVR /MU X ” is s elected for “ Type ” , “ SANYO DVR/MU ” is automatically displayed. • Baudrate: “ 19200 ” is automat[...]

English Preparation 24 Connectio n and Comm unication Setup 4 D When connected to video communication t erminal (VIDEO) and camera communica tion terminal (TELEMETRY B) b Connecting communication conversion connectors (Figure 1) b Connecting communication conversion connectors (Figure 2) Green Red (A) (B) Yellow Yellow White White Dome camera (sold[...]

English 25 Preparation Connection and Communication Setu p 4 (continued) b b b b Making Connections 1 1 1 1 Connect this unit to equipment for communication and operation. Before co nnecting, make sure all equipment is turned off. 2 2 2 2 Terminate Setup. SW1: OFF (Fixed) SW2: OF F (For Came ra A) SW3: ON (For Ca mera B) SW4: ON (For Video) 3 3 3 3[...]

English Preparation 26 Connection and Communication Setup 4 Check Setup: • Type : To operate a hard disk digital recorder with a multiplexer function, this should display “ DVR/MUX ” . • Protocol : When “ DVR/MUX ” is selected for “ Type ” , “ SANYO DVR/MU ” is automat ically displayed. • Baudrate: “ 19200 ” is automatical[...]

English 27 Preparation Connectio n and Comm unicatio n Setup 5 E When connected to video communication terminal (VIDEO) and camera communication terminals (TELEMETRY A/B) b Connecting communication conversion connectors (Figure 1) b Connecting communication conversion connectors (Figure 2) Green Red (A) (B) Yellow Yellow White White WH B L S L O R [...]

English Preparation 28 Connection and Communication Setup 5 b b b b Making Connections 1 1 1 1 Connect this unit to equipment for communication and operation. Before connecting, make sure all equipment is turned off. 2 2 2 2 Terminate Setup. SW1: OFF (Fixed) SW2: ON (For Camera A) SW3: ON (For Camera B) SW4: ON (For Video) 3 3 3 3 Connect this unit[...]

English 29 Preparation Connection and Communication Setu p 5 (continued) Check Setup: • Type : To operate a hard disk digital recorder with a multiplexer function, this s hould display “ DVR/MUX ” . • Protoco l: When “ DVR /MU X ” is s elected for “ Type ” , “ SANYO DVR/MU ” is automatically displayed. • Baudrate: “ 19200 ?[...]

English Preparation 30 Commun ication Lines an d Number of Connected Units This uni t can ope rate mu ltiple ha rd disk d igital rec orders with a mult iplexer func tion connect ed to th e rear vid eo termina l (VIDEO), or m ultiple d ome or zo om came ras connect ed to the c amera term inals (TELEME TRY A/B). Address a nd termin ate se ttings are [...]

English 31 Preparation Communication Lines and Number of Connected Units (Continued) VIDEO COM SW ON 1 234 AB TELEMETRY 12V SW ON 1 234 RS-485 TERMINATE TERMINATE OFF ON RS-485 OFF ON 1 VIDEO COM SW ON 1 234 AB TELEMETRY 12V 2 VIDEO COM SW ON 1 234 AB TELEMETRY 12V 3 VIDEO COM SW ON 1 234 AB TELEMETRY 12V 4 VIDEO COM SW ON 1 234 AB TELEMETRY 12V 5 [...]

English Operati on 32 Hard Disk Digital Recorder (DVR) Operation When con necting t his unit w ith hard disk di gital reco rders, zoo m cameras, etc. Note: Some operation buttons may not be operable, depending on the connected equipment. 1 Press the button. The address input screen appears, and Datum “ 00000 ” will flash. 2 Use the te n-key pad[...]

English 33 Operati on Hard Disk Digital Recor der (DVR) O peration (Continued) 4 Press . changes to . 5 Use the ten-key pad to enter the camera addres s (Exam ple: 2) . The Datum “ 00002 ” will f lash. 6 Press t he button. The Datum changes to “ 00000 ” , and the camera input channel in the message display is “ 2 ” . Press the button t [...]

English Operati on 34 Hard Disk Digital Recorder (DVR) Opera tion Recording stop button The recording s top screen is displayed on the menu display. Press to c ontinue recording, or press to stop recording. Mul tiple disp lay b utto n The main monitor displays a nine-pane or sixteen-pane s creen. The display panes dif fer based on the number of cam[...]

English 35 Operati on Hard Disk Digital Recor der (DVR) O peration (Continued) Security lock button Press to engage a security lock on hard disk digital recorder operation. Camera sequence button This automatically switches t he monitored live image. P ress again to cancel. Menu butt on Press to display the hard disk d igital recorder menu. Ten-key[...]

English Operati on 36 Multiplexer (MUX) operation Note: Some operation buttons may not be operable, depending on the connected equipment. 1 Press the button. The but ton changes to . 2 Press the button. The address input screen appears, and Datum “ 00000 ” will flash. 3 Use the te n-key pad to enter the multiplexe r address (Exampl e: 1), then [...]

English 37 Operati on Multiplexer ( MUX) operation (Continued) b b b b Main Menu Screen O peration Spot monitor b uttons ( *) Press to select the im age to output to the spot monitor. Main monitor button (*) Press to operate the main m onitor. Mult iple d ispla y but ton The main monitor displays a nine-pane or sixteen-pane s creen. The display pan[...]

English Operati on 38 Dome Camera/Z oom Camera Operation Note: Some operation buttons may not be operable, depending on the connected equipment. 1 Press the button. The address input screen appears, and Datum “ 00000 ” will flash. 2 Use the te n-key pad to enter the camera i nput channe l (Exampl e: 1), then pre ss the button. The Datum changes[...]

English 39 Operati on Dome Camera/Zoom Camera Operation (Continued) b b b b Main Menu Screen O peration Perfor ms a sequenti al pan. Performs an automatic pan. Engage s tour mode. Cancels sequential pan/automatic pan/ tour m ode. Performs one-push auto-fo cus. Uses manual focus to adjust focus on a far point. Uses manual focus to adjust focus on a [...]

English Operati on 40 Dome Camera/Zoom Camera Operation Turns OFF ot her funct ions. The ten-key pad screen is displayed on the menu display. Select the function nu mber, and press the button. To return to the previous screen, press the button. Sets zoom to max telefocus. Sets z oom to max wi de. Turns ON backlight compensation. Turns OFF backlight[...]

English 41 System Setup System Setup Overview SYSTEM ent 1-ITALIANO > 2-ENGLISH 3-FRANÇAIS 4-DEUTSCH 5-******** 6-******** 7-******** 8-******** 9-******** 10-******** 11-******** 12-******** ENABLED: ENGLISH LANGUAGE >1-RESTORE BASIS VALUES 2-BUZZER/DISPLAY 3-JOYSTICK 4-TOUCH SCREEN SETTING 5-TOUCH TEST CONFIGURATION >1-AT SWITCHING ON 2[...]

English System Setup 42 Language Selection Passwords and menu display settings are avai lable for o peratin g this un it. As an exampl e, changin g the langu age (LANGU AGE) is expla ined here. Use the sam e method for other s ettings o n the Syst em scree n. 1 System Menu selection buttons Pressing any button will display another menu screen. 2 Pr[...]

English 43 System Setup Communic ation Setup This se ts up com munica tion with equipme nt connecte d to the video c ommunicati on terminal (VIDEO) or camera com munication term inals (TELEMET RY A/B). Serial commu nication testing be tween c onnected equipme nt is als o availa ble. b b b b Select a communication item (COMMUNICATIONS) Press the but[...]

English System Setup 44 Communication Setup b b b b Unit Addres s Setup When purchased, the unit address is set to “ 1 ” . Change the address when using multi ple controllers. Allocate addresses from 0 to 4. * The addresses can also be checked using the but ton. Changing the Un it Address 1 Press the button to select “ Keyboard Add ” , then[...]

English 45 System Setup Communication Setup (Cont inued) B 2 – TELEMETRY (Dome came ra or zoom camera commu nication setu p) Upon purchasing, the communica tion settings are set to c onnect our video equipment to cameras using coaxial cables. Communication uses the video communication term inal (VIDEO) . For details, see “ A-Connector ” . b b[...]

English System Setup 46 Communication Setup C 3 – SERIAL TESTS (Communicati on output t est for video comm unication te rminal an d camera com munication t erminal) Remove all lines c onnected to this unit, and use two m odular cables and two communication converter connec tors to connect as shown below. 1 Connect test cables to each camera commu[...]

English 47 System Setup Control Setu p Sets up e quipment and funct ions effec tive for t his unit. b b b b Select a Control Item (ACCE PTED VA LUES) Press the button or button to select a setup item, then press the button. Displays the selected screen. See the selection item ( A B C ). Selection Items A 1 – CAMERAS (Camera Co mmunica tion Setup)[...]

English System Setup 48 Control Setup Single row cl ear button Clears a row at a time. Individual camera setup button The ten camer as on the c ursor line can be set (A/B/ m ) individually. A line selection button When pressed, the A/B line switch button switches to the button. B line selection button When pressed, the A/B line switch button switch[...]

English 49 System Setup Control Setup (Continue d) C 3 – FUNCTIONS Other functions c an be started or stopped. • Mtx/Dvr/Mux setup Enables display of the video equipment menu. • Telemetry setup Enables display of the camera menu. • Autopan/Scan/Patrol Enables automatic operation of dome cameras. • Joystick Enables joystick operation. • [...]

English System Setup 50 Password Setup (PASSWORD) Passwords can be s et for opera tions upon unit power O N, setup m enu acce ss, etc. enter . 0 Digit password Start enter . 0 Digit password Alarm reset enter . 0 Digit password Parameters enter . 0 Digit password Level 1 enter . 0 Digit password Level 2 enter . 0 Digit password Level 3 ent >1-AT[...]

English 51 System Setup Passwor d Setup (PASSWORD) (Continued) The pass word se tup procedure is the s ame for ea ch ite m. Here, ente ring the p assword upon uni t power ON is explai ned. b b b b AT SWITCHING ON (Power ON passwor d) 1 Press the button or button to select “ AT SWITCHING ON ” , then press the button. The password entry scre en a[...]

English System Setup 52 Setup (CO NFIGURATION) Enter Enter ESC ESC ent ent ent ent 1-RESTORE BASIS VALUES 1-RESTORE BASIS VALUES >Confirm? (ENTER) CONFIGURATION 2-BUZZER/DISPLAY 2-BUZZER/DISPLAY >1-Key pressed : MAX 2-Joystick : YES 3-Serial error : YES 4-Matrix alarm : YES 5-Power saving : NO CONFIGURATION 3-JOYSTICK 3-JOYSTICK >1-Release[...]

English 53 System Setup Setup ( CONFIGURATION) (Continued) b b b b Initialize (RESTORE BASIS VA LUES) When this is set, the settings of each menu screen revert to the default settings. 1 Press the button or button to select “ RESTORE BASIS VALU ES ” , then pres s the button. The “ 1 – RESTORE BASI S VA LUES ” screen is displayed. 2 Press [...]

English System Setup 54 Setup ( CONFIGURATION) • 4 – Matrix alarm: M atrix alarm detection This setting sounds a buzzer when an alarm is dete cted. Selections: YES , N O • 5 – Power saving: Power save functi on When no button s are operated for approximately one minute, the screen brightness is automatically switched (dimmed). When another [...]

English 55 System Setup Setup ( CONFIGURATION) (Continued) b b b b Touch scr een adjust ment (TOUCH SCREEN SETTING) 1 Press the button or button to select “ TOUCH SCREEN SETTING ” , then press the button. The adjustment screen appears. 2 Press t he center of the button at the upper left to display t he press ed coordinates. The “ ***** ” ch[...]

English System Setup 56 Setup ( CONFIGURATION) 6 Press t he button. The coordinates at the lower right are placed in mem ory, and change to “ = = = = = ” . 7 Press t he button. The coordinates at the upper left and lower right are in m emory. b b b b Touch Screen Initialization and Reset Initialize the set coordinates, and set the coordinates a[...]

English 57 System Setup Setup ( CONFIGURATION) (Continued) 5 After initiali zing, operate the joystick as shown i n the drawing to perform touch screen adjustment. The touch screen adjustment screen appear s. Perform settings using the procedure on P55. Afte r setu p is compl ete, the “ DOWNLOAD MODE ” scree n is displayed. Turn t he dipswitch [...]

Software CONT ENTS 2 2 2 2 Software Configuration ..... .............. ............ 59 2 2 2 2 Connection and Software Ins tallation ........ 60 2 2 2 2 System Setup (Setup) ............ .............. ........ 61 2 2 2 2 Language Setup (La nguage) ........... ............ 68 2 2 2 2 Graphics Env ironment Setup (Maps) ......... 71[...]

English 59 Software Software Confi guration Use the s oftware on th e provide d CD-ROM to p erform various settings for this unit on your PC. Syst em set up fo r thi s un it ar e per form ed on t he PC. Th e se ttin g cont ents can be saved on the PC, m aking it e fficient to manage d iffering s ettings, set one setting on mult iple sy stem con tro[...]

English Software 60 Connectio n and Software Installation b b b b Install the Software 1 Insert the provided CD-ROM in the CD- ROM drive on th e PC, open it, and click SET UP.EXE. The next screen is displayed. 2 Follow the instructions on the screen to install the soft ware. Three pieces of software are installed: Keyboard S etup, Keyboard Language[...]

English 61 Software System Setup (Setup) 1 Menu [File] New: Create new system settings. Open: Open existing settings. Save: Sa ve settings. Save as: Save settings by another name. Receive from keybo ard: Download unit settings to this software. Send to keyb oard: Upload software set tings to the unit. COM Port: Select the PC port number (1 to 9). [[...]

English Software 62 System Setup (Se tup) A General ( General S ettings) 1 From the “ Fil e ” menu, select “ New ” . • To open sav ed settings, select “ Open ” . • To download the c urrent unit settings and change them , select “ Receive from keyboard ” . 2 Clic k t he [ Gen eral ] t ab. 3 Make the various settings. (P63) 1 Lang[...]

English 63 Software System Se tup (Setup) (Continued) 1 Language (Select Lang uage): Each nu mber corr esponds to the numb er by each langua ge displayed in the L ANGUAGE sc reen unde r Syst em Set up ( ). Check th e display l anguage and select th e proper number. 2 Communica tions (Communi cation Se tup) : b b b b When controlling a camera connec[...]

English Software 64 System Setup (Se tup) B Cameras (C amera communic ation setup) 1 Click the [Cameras] tab. 2 Set camer a lines using the various buttons. : Clear butto n Disconnects all cameras. : Single row clear button Clears a row at a time. : A/B lin e sw itch but ton When pres sed, all camera connection terminals switch to A. : Single row s[...]

English 65 Software System Se tup (Setup) (Continued) Changing the Camera Address Number • Click to enter input/output settings mode (upper left grid displays “ Addr. ” ). To set a camera address, double-click it and enter the number. • To change the address of a camera connected to another hard disk digital recorder or multiplexer (Dvr/Mux[...]

English Software 66 System Setup (Se tup) C Monitor/Local Mux (Valid/Invalid set up for hard disk digit al recorder with mult iplexer) 1 Click the [Monit or/Local Mux] tab. 2 Set the video equipme nt output using the various buttons. : Clear butto n Invalidates all video equ ipment. : Single row invalidate button Sets a row to be invalid. : All val[...]

English 67 Software System Se tup (Setup) (Continued) D Enabling (stopping or starting settings) 1 Click the [Enabling] tab. 2 Check the functions to turn ON. Uncheck the f unctions to turn OFF, leaving them blank. • Setup Matrix/Dv r/Mux Enables display of the v ideo equipment menu. • Setup Telem etry Enables display of the camera m enu. • A[...]

English Software 68 Languag e Setup (Lang uage) 1 Menu [Text m anagement ] Receive from keybo ard: Receives the current language from the unit. Load fr om file: Opens language settings file. Send to keyboard: Uploads software language settings to the unit. Save on fi le: Saves current language settings to a file. Special characters: Displays an inp[...]

English 69 Software Language Setup (Language ) (Continued) b b b b Creating Two Different English Tabs 1 From the “ Text management ” menu, sel ect “ Receive fr om keyboard ” . 2 Receives t he current la nguage from the un it. The receive status is displayed on the screen, and t he language is displayed when receiving is com plete. Exampl e[...]

English Software 70 Language Setup (Language) 7 Use the s ame proced ure to change other words o r change them into symbols, cre ating tabs with different English wording. Pressing will display t he special character input scre en. Enter the language name in the t op row. 8 From the “ Tex t ma nage me nt ” menu, sel ect “ Sen d to keyboard ?[...]

English 71 Software Graphics Environm ent Setup (Map s) 1 Menu [Project] • New: Creates new graphics. • Open: Opens an existing file. • Save: Sav es cur ren t set tin gs. • Save as: Save settings by another name • Receive from keyboard: Downloads the current settings from the unit. • Send t o keyboa rd: Upload software settings to the u[...]

English Software 72 Graph ics Envir onment Se tup (Ma ps) b b b b Display Telephone Number on Open ing S cre en 1 From the “ Project ” menu, selec t “ New ” . The Opening screen appears. 2 Click the “ Servic e ” tab, click “” , and selec t the imag e file to read. 3 Fro m th e “ Project ” menu, select “ Send to keyboard ” . [...]

English 73 Software Graphics Environment S etup (Maps) (Continue d) b b b b Map Sc reen Ex planat ion 1 From the “ Projec t ” menu, select “ New ” . The Opening screen appears. 2 Click the [Maps] tab. The left window displays Map 1, and the right window displays the General icon. Double-clic k 1 7 3 6 G 89 5 4 F 2[...]

English Software 74 Graph ics Envir onment Se tup (Ma ps) 1 Map Displa y 2 Map Se lection Click the up or down arrows on the spin button to switch the map display screen. Note: Maps 1 to 4 are basic displays for this unit, and cannot be changed (Locked ). To allocate button f unctions, select Map 5 to 30. 3 Map selection button From the pull-down m[...]

English 75 Software Graphics Environment S etup (Maps) (Continue d) (Allocation Setup Screen) (1) Matrix /Mux-Dvr Allocates functions and selects video equipment and camera s for operat ion. (2) Moveme nts Allocates dome camera automatic functions. See Protocol Ch art (Autopan/Patrol). (P79, 80) (3) Focus/Iris Allocates camera foc us and iris funct[...]

English Software 76 Graph ics Envir onment Se tup (Ma ps) b b b b Sample Equipment Alloca tion A To allocate “ Play ” to the hard disk digital recorder (DVR) at ad dress 1 1 Check “ Mix ed Sy stem ” . 2 Check “ Local Dvr ” . 3 Check “ Select Dvr ” , and enter “ 1 ” in the text box (input field). 4 Check “ Dvr Functions ” , a[...]

English 77 Software Graphics Environment S etup (Maps) (Continue d) B Select the camera connected to CH16 of the hard disk digital recorder (DVR) on ad dress 2, a nd alloca te “ Autopan ” . 1 Check “ Mi xed System ” . 2 Check “ Local Dvr ” . 3 Check “ Select Dvr ” , and enter “ 2 ” in the text box (inpu t field). 4 Check “ Sel[...]

English Software 78 Graph ics Envir onment Se tup (Ma ps) C To switch the map disp lay screen t o Map 15 1 At the lower right of the scr een, b y “ Ju mp p age ” , check “ No. ” , and e nter “ 15 ” in the text box. 2 Press “ S ave and ex it ” to exit the screen . 2 1[...]

English 79 Software Graphics Environment S etup (Maps) (Continue d) b b b b Protocol Char t (Autopan) (*) only wi th VKR Eneo ma trix on video li ne Proto col Start 1 Stop 2 Toggle 3 Number Funct ion Number Func tion Number Function ------ --------- --- 1..32 START MULTISEQUEN CE (*) 1..32 START SALVO (* ) 1..32 START SEQUENC E(*) ELBEX 0..2 0 S TA[...]

English Software 80 Graph ics Envir onment Se tup (Ma ps) b b b b Protocol Chart (Patr ol) (*) only with VKR Eneo matrix on video line Protoco l Start 4 St op 5 To ggle 6 Number Funct ion Number Function Number Function ------- ----- ------ 1..32 START T OUR (*) 0 STOP TOUR (*) 0 RESET TOUR (*) ELBEX ELMO 0..3 START SEQUE NCE 1..4 (0..3) ENEO 0 STA[...]

English 81 Software Graphics Environment S etup (Maps) (Continue d) b b b b Changing the Opening screen to “ SANYO ” 1 From the “ Projec t ” menu, sele ct “ New ” . The Opening screen appears. 2 Click the “” icon, and sele ct t he ima ge f ile t o rea d. 3 Past es the sele cted “ SANYO ” logo onto the opening screen. 4 From the [...]

English Software 82 Graph ics Envir onment Se tup (Ma ps) b b b b Create a map using the graphics tool and display on opening screen. 1 From the “ Project ” menu, selec t “ New ” . The Opening screen appears. 2 Fro m th e “ Images ” m enu, select “ Change ima ge ” . A paint screen (FPaint) is displayed. Create a map or other graphic[...]

English 83 Software Graphics Environment S etup (Maps) (Continue d) 3 Click to save setting s. 4 From the “ Projec t ” menu, sele ct “ Send to keyboard ” . A dialog box is displayed for select ing the upload screen. Check the “ Maps ” checkbox, and click the OK button. The pasted image is uploaded. Saving settings on PC From the “ Pro[...]

English Software 84 Graph ics Envir onment Se tup (Ma ps) 3 Drawing Tools : Selects t he item (c ursor) : Draws lines freehand : Draws straight line : Draws rectangle (outline only) : Draws solid rectang le : Draws rectangle with rounded corners (outline only) : Draws solid rectangle with rounded corners : Draws circle (outline only) : Draws solid [...]

English 85 Others Specifications Appearance and specifications may be revised without notice. Thank you for your understanding. b b b b Outer Dimen sions (Units: mm) Communica tion Meth od RS485 Keyboard Backlight LCD, 320 x 240 touch screen Joystick Three-axis joystick (pan/tilt/zoom) Control terminal RJ-11 terminal: V IDEOx1, TELEMETE RYx2 RS-232[...]

English Others 86 Appendix b b b b Communications Chart 1 – VIDEO (Vi deo Line) Type Proto col Baudrate DVR/MUX SANYO DV R/MU 2400, 4800, 9600, 19200 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4/2 VIDEOTEC MACRO MACRO NO P. 1200, 9600, 19200, 38400 1200, 9600, 19200, 38400 8/2 VIDEOTEC MACRO MACRO NO P. 12[...]

English 87 Others Appendix (Continued) 2 – TELEMETRY A (Camer a Line) 2 – TELEMETRY B (Camer a Line) Connector P rotoco l Baudrate Video Video Video Video SANYO SSP SANYO HSSP SANYO HSSP SANYO HSSP SANYO HSSP - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - When any other protocol is selected, the connector is aut[...]

English Others 88 Appendix b b b b Message Chart ALARM: Esc to ex it PATROL: Sen t 'Walk' Stop AUX: Select fu nction PATROL: Sent Re cording "Walk" nr. AUX: Function not available PRESET: Select func tion AUX: Function not enabled PRESET: Sent De lete preset position AUX: Sent Set PRESET: Esc to exit AUX: Sent Res et PRESET: Sen[...]

English 89 Others Appendix (Continued) b b b b Special Co de Chart These functions can be loaded by entering their special codes. ERNITEC SA TURN ........ ....... ...... .... ...... ....... ...... 89 MARK MERCER ........ .... ....... ...... ...... ....... .... ...... 90 PELCO . ...... ..... ...... ...... .... ....... ...... .... ....... ...... ....[...]

English Others 90 Appendix b b b b MARK MERCER Cod e Functio n IRIS MANUAL 11 Opens the iris. 12 Clo se s th e ir is . ON SCREEN DISPLAY 21 Screen display ON. 22 Screen display OFF. 23 Screen display on top half of monitor. 24 Screen display on bottom half of monitor. INFRARED RESPONSE CURVES 31 Initially set curve (visible light) 32 950nm curve 33[...]

English 91 Others Appendix (Continued) Code Functio n TOGGLE AUTO PARK (ON/OFF) 2XX Dome camera s can be set to automatically move to preset position No. 1 after a set stopping inter val passes. XX= 01 – 99 (*): Waiting time (minutes) be fore automatically stopping (*) when waiting time XX =00 , the funct ion is invalid. Example: “ 205 ” Auto[...]

English Others 92 Appendix b b b b PELCO Cod e Functio n 0 Pan 0 positio n SPEED CURVES 11 First speed c urve (speed values : 1, 5, 10, 20, 30, 45, 63). 12 Second speed curve (speed values: 1, 10, 20, 30, 40, 50, 63). 13 Third speed curve (speed values: 10, 15, 20, 25, 30, 45, 63). 14 Fourth speed curve (default setting) (speed values: 29, 37, 45, [...]

English 93 Others Appendix (Continued) Code Functio n ALARMS X Alarm identification ( X is 1 to 8 ) MISC 99 Cleans screen. 999 Initializes remote camera operations (pan/tilt). 9999 Initializes remote camera operations (to default values). 70 Backlight compensat ion ON 71 Backlight compensat ion OFF 80 White balance O N 81 White balance O FF 90 Make[...]

English Others 94 Appendix b b b b SENSO RMATI C Cod e Functio n RELAYS 0 All relays OFF 1 Relay 1 ON 2 Relay 2 ON 3 Relay 3 ON 4 Relay 4 ON 12 Relay 1 and 2 ON 13 Relay 1 and 3 ON 14 Relay 1 and 4 ON 23 Relay 2 and 3 ON 24 Relay 2 and 4 ON 34 Relay 3 and 4 ON 123 Relay 1, 2 and 3 ON 124 Relay 1, 2 and 4 ON 134 Relay 1, 3 and 4 ON 234 Relay 2, 3 an[...]

1AC6P1P2951-- L8CSC/WA (0805KP)a VTECH SANYO Electric Co., Ltd.[...]