Savin C4540 инструкция обслуживания

Operating Instructions Printer Reference Read this manual carefully before yo u use this machi ne and keep it h andy for future reference. For safe and corre ct use, be sur e to rea d the Safety Informatio n in "About This Machi ne" before using the ma chine. Preparing the Machine Setting Up th e Printer Driver Other Print Operations Dire[...]

Introduction This manual contains detailed instructions and note s on th e operation and use of this ma chine. For your safety and benefit, read this manual carefully be fo re using the machine. Kee p this manual in a handy place for quick reference. Important Contents of this manual are subject to change witho ut prior notice. In no event wil l th[...]

i Manuals for This Machine Refer to the manuals that are relevant to what y ou want to do w ith the machine. ❖ About This Machine Be sure to read the Safety Informatio n in this manual before using the ma- chine. This manual provides an introductio n to the functions of the mac hine. It also explains the control panel , preparation procedures for[...]

ii ❖ Other manuals • Manuals for This Machine •S a f e t y I n f o r m a t i o n • Quick Reference Copy Guide • Quick Reference Fax Guide • Quick Reference Printer Guide • Quick Reference Scanner Guide • PostScript3 Supplement •U N I X S u p p l e m e n t • Manuals for DeskTopBinder Li te • DeskTopBinder Lite Setup Guide • D[...]

iii TABLE OF CONTENTS Manuals for This Machine .............................................. ........................................ i How to Read This Manual .............................................. ....................................... 1 Symbols ........... ........... ........... .............. ........... ............ .............. .[...]

iv Installing Font Manager 2000.............................................................. ................ 54 Using Adobe PageMaker Version 6.0, 6.5, or 7.0 ................... ........................... 55 2. Setting Up the Printer Driver PCL - Accessing the Printer Properties ............................................................. 57 W[...]

v Chaptering ....................................... .......................................... ......................... 125 No slip sheets ........... ................................................... ................ ................. .......... 125 Inserting chapter slip sheets ..... .............. ... ..... ............ .............. ......[...]

vi[...]

1 How to Read This Manual Symbols This manual uses the foll owing symbols: Indicates important sa fety notes. Ignoring these notes could resu l t i n s e r i o u s i n j u r y o r d e a t h . B e s u r e t o r e a d t h e s e notes. They can be found in the "Safety Information" section of About This Ma- chine. Indicates important sa fety [...]

2 Display Panel This section describes configuration us ing the display panel when the printer function is selected. Initial Display Important ❒ The machine switch es to offline when yo u make settings when th e machine is online. After you complete the settin g, the machine switches to online au- tomatically. ❒ If you make a setting when the m[...]

3 5. [ Print Jobs ] Press to display print jobs sent from a computer. 6. [ Error Log ] Press to display the error logs of print jobs sent from a computer. 7. [ Spooling Job List ] Press to display spooled jobs. 8. Paper Tray Status indicators The paper tray settings appear. Note ❒ When the power is turned on, the copier display is show n. This is[...]

4 Job List Jobs printed using Copy, Do cument Server or Printer mode are temporarily stored in the machine, and then executed in order. Using th e Job List function allows you to manage th ese jobs. For exam ple, you can cancel incorr ect job set- tings or print an urgent docum ent. Note ❒ You cannot use the Job List function when Interrupt Copy [...]

5 ❖ When [ Job Order ] is selected: The job list is displayed for all fu nctions in the order of print jobs. A Switches between job lists for each function. B Switches between [ Current / Waiting Job List ] and [ Job History ] . C Displays the Job List screen. D Reserved job numbers are displ ayed. E Functions that printed jobs are displayed. : J[...]

6 Changing the order of jobs You can change the order in which prin t jobs in the j ob list are served: A Press [ Job List ] . B Select the job whose order you want to change. C Press [ Change Order ] . D Change the order using [ Top ] , [ Previous ] , or [ Next ] . The order of th e job list is changed. E Press [ OK ] .[...]

7 Holding print jobs The machine holds a job currently prin ting or jobs in the print queue: A Press [ Job List ] . B Select the job(s) to hold. C Press [ Suspend Printing ] . Deleting jobs You can delete a job curr ently printing or jobs in the print queue. A Press [ Job List ] . B Select the job to be deleted. To delete mult iple print jobs , sel[...]

8 Printer Features Menu The following explains settings and mean ings of functions on Printer Feature. Select [ Printer Feature ] after you press the { User Tools/Counter } key. For details, see “Printer Features”, General Settings Guide. ❖ List / Test Print ❖ Maintenance Menu Description Multiple Lists Yo u ca n p ri n t t h e configuratio[...]

9 ❖ System Menu Description Print Error Report You can print an erro r report when a printer or memory error oc curs. Auto Continue You can select th is to en able Auto Continue. When it is On, printing continues after a sys- tem error occu rs. Memory Overflow Select this to have a mem ory overflow error report printed. Job Separation You can ena[...]

10 ❖ Host Interf ace ❖ PCL Menu Edge to Edge P rint Y ou can s elect whether or not to print on the entire sheet. Default Printer Language You can set the default printe r language if the machine cannot find the printer language automatically. Tray Switching You can set to switch the paper tray. Menu Description I/O Buffer You can set the size [...]

11 ❖ PS Menu (optional) ❖ PDF Menu (optional) Note ❒ Some options do not appear depending op tional units or se lected printer lan- guages. ❒ Some options cannot be set de pending on security settings. Reference For details, see “Pr inter Features” , General Sett ings Guide. For more information about copier features and system settings[...]

12 Setting Paper on the Bypass Tray This section g ives instruc tions fo r setting paper on the bypass tray. For details about paper size and paper type, see “Paper Size and Paper Type”, About This Machine. Important ❒ The following functions are disabled when printing from the bypass tray: • Duplex/Booklet printing •A u t o T r a y S e l[...]

13 C Set the paper size using the printe r driver or the control panel. The following procedures are not required i f you select [ Driver / Command ] from [ Bypass Tray Setting Priority ] in [ System ] of [ Printer Features ] . In that case, set the paper size using the printer driver. Note ❒ Paper sizes that can be l oaded onto the bypass tray a[...]

14 E Select the paper size. F Press [ OK ] . G Press the { User Tools/Counter } key. The initia l screen appear s. Note ❒ When loading OHP transparencies or th ick paper, set paper size and paper type. ❒ [ Auto Detect ] is the default setting for [ Printer Bypass Paper Size ] . Reference For printer driver settings, see the printer driver Help.[...]

15 F Press [ Vertical ] , enter the vertical size of the paper using the number keys, and then press the { q } key. G Press [ Horizontal ] , enter the horizontal size of the paper using the number keys, and then press the { q } key. H Press [ OK ] . The paper sizes entered are displayed. I Press the { User Tools/Counter } key. The initia l screen a[...]

16 F Press [ OHP (Transparency) ] on the [ Paper Type ] area when loading OHP trans- parencies. Press [ No Display ] on the [ Paper Type ] area, and then press [ Thick Pa- per 1 ] , [ Thick Paper 2 ] , or [ Thick Paper 3 ] on the [ Paper Thickness ] area when loading thick paper. G Press [ OK ] . The paper type selected is displayed. H Press the { [...]

17 1. Preparing the Machine Confirming the Connection Method This machine suppo rts netw ork and local connection. Before ins talling the printer driv er, ch eck how the machine is connected. Follow the driver installation proc edure that is appropriate to the connection method. Network Connection This machine can be used as a Win dows printing por[...]

Preparing the Machine 18 1 ❖ Windows Me ❖ Windows 2000 ❖ Windows XP ❖ Windows Server 2003 ❖ Windows NT 4.0 Reference See the explanatio n about how to instal l the printer driver for each ty pe of port. For the Sm artDeviceMonitor for C lient port, see p.2 2 “Using the Smar t- DeviceMonitor for Client Port”. For the Standard TCP/IP po[...]

Confirming the Connection Method 19 1 Using as a network printer This machine can be used as the Wind ows network pr inter, the NetWare print server, or the NetWare remote printer. Note ❒ In an IPv6 environment, NetW are servers cannot be used. Reference See the explanatio n about how to instal l the printer driver for each ty pe of network print[...]

Preparing the Machine 20 1 Local Connection Local connections can be established vi a parallel, USB, I EEE 1394 (SCSI print), and Bluetooth connections. Windows operating system version determ ines the available connection methods. •W i n d o w s 9 5 : Parallel connections • Windows 98: Parallel connections • Windows 98 SE / Me: USB and Paral[...]

Installing the Printer Driver 21 1 Installing the Printer Driver This section e xplains how to install the printer driver. There are two ways to in- stall the printer driver: usin g Quick Install, which insta lls the settings at once, or installing the ap propriate driver according to the po rt you want to us e. Quick Install Windows 95 / 98 / Me /[...]

Preparing the Machine 22 1 H Click [ Finish ] . A message about restarting the computer appears. Restart the computer to complete installation. I Click [ Exit ] in the first dialog box of the installer, and then take out the CD- ROM. Note ❒ To stop installation of th e selected software, click [ Cancel ] before instal la- tion is complete. ❒ Au[...]

Installing the Printer Driver 23 1 F The message to quit all other applica tions appears. Quit al l applications, and then click [ Next > ] . G The software license agreement appears in the [ License Agreement ] dialog box. After reading through its contents, click [ Yes ] . H Click [ Full install ] or [ Custom Install ] . [ Full install ] insta[...]

Preparing the Machine 24 1 Windows XP, Window s Server 2003: A Open the [ Printers and Faxes ] window from the [ Start ] menu. The [ Printers and Faxes ] window appears. B Click the icon of the machine you want to use. On the [ File ] menu, click [ Properties ] . The printer properties appear. C Click the [ Ports ] tab, and then click [ Configure P[...]

Installing the Printer Driver 25 1 F Select the printer driver you want to use in the [ Select Program ] dialog box. You can select several printer dr ivers. G Click [ Next > ] . H Select the machine model you want to use. The printer name can be chan ged in the [ Change settings for 'Printer Name' ] box. I Double-click the printer nam[...]

Preparing the Machine 26 1 Reference A message appears if there is a newer version of the printer driver already installed. If there is, you cannot install the printer driver using Auto Run. If you still want to install the printer driver, use [ Add Printer ] . See “When a Mes- sage Appears during Installation of the Pr inter Driver”, Trouble S[...]

Installing the Printer Driver 27 1 M Enter a name for identifying the printer in [ IPP Port Name ] . Use a name dif- ferent from the one of any existing port. If a name is not specified here, the address entered in the [ Printer URL ] box be- comes th e IPP port name. N Click [ Detailed Settings ] to make necessary settings. For information about t[...]

Preparing the Machine 28 1 Using the Standard TCP/IP Port This describes how to inst all the PCL or RPCS printe r driver using the TCP/IP port. Important ❒ To install this printer driver unde r Windows 2000 / XP Professional, and Windows Server 2003, you must have an account that has Manage Printers permission. Log on as an Administra tors or Pow[...]

Installing the Printer Driver 29 1 M Enter the printer name or IP address in the [ Printer Name or IP Address ] box. The [ Port Name ] text box automatically obtains a port name. Change this name if necessary. When the device selection appears, se lect “RICOH Ne tworkPrinter D river C Model”. N Click [ Next > ] . O Click [ Finish ] in the [ [...]

Preparing the Machine 30 1 Using the LPR Port This describes how to install the PCL or RPCS printer driver using the LPR port. Important ❒ To install this printer driver unde r Windows 2000 / XP Professional, Win- dows Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. Log on as an Administrators or Pow[...]

Installing the Printer Driver 31 1 N Check that the port of the selected printer is displayed in [ Port: ] . O Configure the default printer as necessary. P Click [ Continue ] . The printer driver installation starts. Q After the installation is completed, se lect one of the options to restart the computer either now or later, and then click [ Fini[...]

Preparing the Machine 32 1 Using as a Windows Network Printer This describes how to install the PCL or RPCS printer driver when using the printer as a Windows network pr inter. To use the print server, install the prin ter driver by selecting “Network printer server”, and then select the Windows 2000 / XP, Windows Server 2003, or Win- dows NT 4[...]

Using as a Windows Network Printer 33 1 H Select the [ Pri nter Name ] check box to select the printer models you want to use. The printer name can be chan ged in the [ Change settings for 'Printer Name' ] box. I Double-click the printer name to display the printer settings. The details shown in [ Comment: ] , [ Dr iver: ] , and [ Port: ][...]

Preparing the Machine 34 1 Using as a NetWare Print Server / Remote Printer This describes how to set up the Windows computer used as the NetWa re client. Important ❒ To install this printer driver unde r Windows 2000 / XP Professional, Win- dows Server 2003, and Windows NT 4.0, you must have an account that has Manage Printers permission. Log on[...]

Using as a NetWare Print Server / Remote Printer 35 1 H Double-click the printer name to display the printer settings. The details shown in [ Comment: ] , [ Dr iver: ] , and [ Port: ] vary depending on the operating system, printer model, and port. I Click [ Port: ] , and then click [ Add ] . J Click [ Network Printer ] , and then click [ OK ] . K [...]

Preparing the Machine 36 1 Form Feed Do not use NetWare to configure form feed . Form feed is cont rolled by the print- er driver on Windows. If NetWare fo rm feed is configured, the prin ter may not print properly. Follow the procedure below to disable fo rm feed accordi ng to the operating sys- tem used: • Under Windows 95 / 98 / Me, clear the [...]

Installing the Printer Driver Using USB 37 1 Installing the Printer Driver Using USB This section ex plains how to in stall printer drivers using USB. Before installing, check that only the op erating system is running on the comput- er and no print jo bs are in progress. The printer drivers can be installed fr om the supplied CD-ROM provided with [...]

Preparing the Machine 38 1 H Insert the printer driver. Click [ Search for the best driver for your device. [Recom- mended] ] , and then click [ Next > ] . I Select the [ Specify a location: ] check box, and then click [ Browse... ] . The [ Browse for Folder ] dialog box appears. J Insert the CD-ROM into the CD- ROM drive. Note ❒ When Auto Run[...]

Installing the Printer Driver Using USB 39 1 Windows 2000 - USB Important ❒ Installing a printer driver requires Administrator permission. Log on using an account that has Administrator permission. When USB is first used, Found New Hardware Wizard starts, and USB Printing Support is installed automatically. If the printer driver has already been [...]

Preparing the Machine 40 1 H Click [ Finish ] . If the printer driver has already been in stalled, plug and play is enabled, and the icon of the printer connected to the “USB001” port is added to the [ Printers ] window. Note ❒ The number after “USB” varies depend ing on the number of printers con- nected. Windows XP, Windows Server 2003 [...]

Installing the Printer Driver Using USB 41 1 D Select the [ Include this location in the search ] check box under [ Search for the best driver in these location ] , and then click [ Browse ] to select the printer driver lo- cation. If the CD-R OM drive is D, the sour ce files of th e printer dr iver are stored in the following location: •R P C S [...]

Preparing the Machine 42 1 Printing with Parallel Connection This describes how to install the PCL or RPCS printer driver when using the par- allel port. To use a machine connected using a parallel interface, click [ LPT1 ] when install- ing the printer driver. Important ❒ To install this printer driver unde r Windows 2000 / XP Professional, Win-[...]

Printing with Parallel Connection 43 1 M After the installation is completed, se lect one of the options to restart the computer either now or later, and then click [ Finish ] . Restart the computer to complete installation. Note ❒ To stop installation of th e selected software, click [ Cancel ] before instal la- tion is complete. ❒ Auto Run ma[...]

Preparing the Machine 44 1 Installing the Printer Driver Using IEEE 1394 (SCSI print) The printer drivers can be installed fr om the supplied CD-ROM provided with this machine. Important ❒ Quit all applications currently running, and do not print during installation. ❒ Do not connect IEEE 1394 or USB devices to the computer or turn on another p[...]

Installing the Printer Driver Using IEEE 1394 (SCSI print) 45 1 E Insert the CD-ROM into the CD- ROM drive. • If Auto Run starts, click [ Cancel ] , and then [ Exit ] . • To disable Auto Run, press the left { Shift } key when inserting the CD-ROM into the drive and keep it pressed un til the computer finishes reading from the CD-ROM. F Click [ [...]

Preparing the Machine 46 1 Windows XP, Windows Server 2003 This describes how to install the printe r driver to the computer with Windows XP or Windows Server 2003 instal led, using IEEE 1394 (SCSI print). Important ❒ SCSI print must be set to “active” from the contr ol panel. For de tails, see Net- work Guide. ❒ Installing this printer dr [...]

Installing the Printer Driver Using IEEE 1394 (SCSI print) 47 1 F Follow the on-screen instructions. If the printer driver has already been inst alled, the printer icon is added to the [ Printers and Faxes ] window. In this case, printer driver installation is not nec- essary. Even if the printer driver is already installed, the message “Found Ne[...]

Preparing the Machine 48 1 Printing with Bluetooth Connection This describes how to print wi th Bluetooth devices. Supported Profiles Refer to following supported prof iles for Bluetooth connection. ❖ SPP, HCRP • A maximum of two Bluetooth adapto r or Bluetooth-equ ipped computers can be connected at the same time using the Bluetooth interface:[...]

Printing with Bluetooth Connection 49 1 Printing with Bluetooth Connection To install the printer driver, follow the pr ocedure used to install parallel interface. Important ❒ To install the printer driver under Wi ndows 2000 / XP Professional or Win- dows Server 2003, you must have an account that has Manage Printers per- mission. Log on as an A[...]

Preparing the Machine 50 1 Configuring Security Mode Settings This describes how to configur e the security mode settings. A Start 3Com Bluetooth Connection Manager. B On the [ Tools ] menu, click [ Security Mode ] . The [ Security Mode ] dialog box appears. C Select the security mode in the [ Security Mode: ] list. If you click [ High ] , or [ Cus[...]

Making Option Settings for the Printer 51 1 Making Option Settings for the Printer Make option settings for the machine usin g the printer driver when bidirectional communication is disabled. Reference For details about maki ng option setting s for the printer, see p.53 “If Bidi rec- tional Communication Is Disabled”. Conditions for Bidirection[...]

Preparing the Machine 52 1 ❖ When connected with the network • The machine must support bidirectional communication. • SmartDeviceMonitor for Client incl uded on the CD-ROM must be in- stalled, and TCP/IP must be used. • Under Windows 2000, [ Enable bidirectional support ] must be selected, and [ Enable printer pooling ] m u s t n o t b e s[...]

Making Option Settings for the Printer 53 1 If Bidirectional Communication Is Disabled Set up option settings w hen bidire ctional communications are disabled. Important ❒ Under Windows 2000 / XP and Windows Server 2003, Manage Printers per- m i s s i o n i s r e q u i r e d t o c h a n g e the printer properties in the [ Printers ] folder. Log o[...]

Preparing the Machine 54 1 Installing Font Manager 2000 Important ❒ Under Windows 2000 / XP, Windows Server 2003, or Windows NT 4.0, in- stalling applications by Auto Run requ ires admini strator permission. To i n- stall a printer driver by Auto Run, log on using an account that has administrator permission. A Quit all applications currently run[...]

Using Adobe PageMaker Version 6.0, 6.5, or 7.0 55 1 Using Adobe PageMaker Version 6.0, 6.5, or 7.0 Under Windows 95 / 98 / Me / 2000 / XP, Wi ndows Server 2003, or Windows N T 4 . 0 w i t h A d o b e P a g e M a k e r , y o u n e e d t o c o p y P P D f i l e s t o t h e P a g e M a k e r folder . PPD files have th e .ppd extension i n the folder ?[...]

Preparing the Machine 56 1[...]

57 2. Setting Up the Printer Driver PCL - Accessing the Printer Properties Windows 95 / 98 / Me - Acce ssing the Printer Properties There are two methods to open th e printer properties dialog box. Making Printer Default Settings To make the printer default sett ings, open the printer properti es dialog box from the [ Printers ] window. Important ?[...]

Setting Up the Printer Driver 58 2 D Click [ OK ] to start print ing. Note ❒ The procedure to open the printer prop erties dialog box may vary depend- ing on the application. For details, see the manuals provided with the ap- plication you use. ❒ With some applications, the printer dr iver settings are not used, and the application's own d[...]

PCL - Accessing the Printer Properties 59 2 Making Printer Default Settings - Printing Preferences Important ❒ You cannot change the prin ter default settings for each user. Settings made in the printer properties dialog box are applied to al l users. A On the [ Start ] menu, point to [ Settings ] , and then click [ Printers ] . The [ Printers ] [...]

Setting Up the Printer Driver 60 2 Windows XP, Windows Server 2003 - Accessing the Printer Properties Making Printer Default Settings - The Printer Properties Important ❒ To change the printe r default settings including option configuration settings, log on using an account that has Manage Printers permission. Members of the Administrators and P[...]

PCL - Accessing the Printer Properties 61 2 Making Printer Settings from an Application You can make printer settings for a specific application. To make printer settings for a specific application, open the [ Printing Preferences ] dialog box from that application. The foll owing explains how to make settings for the NotePad application provide d [...]

Setting Up the Printer Driver 62 2 D Make the necessary settings, and then click [ OK ] . Note ❒ S e t t i n g s y o u m a k e h e r e a r e u s e d a s t h e default settings for all applications. Reference For details, see the printer driver Help. Making Printer Default Settings - Default Important ❒ To change the printe r default settings in[...]

PCL - Accessing the Printer Properties 63 2 D Click [ OK ] to start print ing. Note ❒ The procedure to open the printer prop erties dialog box may vary depend- ing on the application. For details, see the manuals provided with the ap- plication you use. ❒ With some applications, the printer dr iver settings are not used, and the application&apo[...]

Setting Up the Printer Driver 64 2 RPCS - Accessing the Printer Properties Windows 95 / 98 / Me - Acce ssing the Printer Properties There are two dia log box types of the printer properties dialog box. “Multi-tab” is used as an example in this manual. For details about changing the dialog box types, see the printer driver Help. ❖ Multi-tab Th[...]

RPCS - Accessing the Printer Properties 65 2 Making Printer Settings from an Application You can make printer settings for a specific application. To make printer settings for a specific application, open the printer prope rties dialog box from that application. The foll owing explains how to make settings for the NotePad application provid ed with[...]

Setting Up the Printer Driver 66 2 Windows 2000 - Accessing the Printer Properties This describes how to launch printer driver's properties. Making Printer Default Settings - The Printer Properties Important ❒ To change the printe r default settings including option configuration settings, log on using an account that has Manage Printers per[...]

RPCS - Accessing the Printer Properties 67 2 D Make the necessary settings, and then click [ OK ] . Note ❒ S e t t i n g s y o u m a k e h e r e a r e u s e d a s t h e default settings for all applications. Reference For details, see the printer driver Help. Making Printer Settings from an Application You can make printer settings for a specific[...]

Setting Up the Printer Driver 68 2 Windows XP, Windows Server 20 03 - Accessing the Printer Properties Making Printer Default Settings - The Printer Properties Important ❒ To change the printe r default settings including option configuration settings, log on using an account that has Manage Printers permission. Members of the Administrators and [...]

RPCS - Accessing the Printer Properties 69 2 D Make the necessary settings, and then click [ OK ] . Note ❒ S e t t i n g s y o u m a k e h e r e a r e u s e d a s t h e default settings for all applications. Reference For details, see the printer driver Help. Making Printer Settings from an Application You can make printer settings for a specific[...]

Setting Up the Printer Driver 70 2 Windows NT 4.0 - Accessing the Printer Properties Making Printer Default Settings - The Printer Properties Important ❒ To change the printe r default settings including option configuration settings, log on using an account th at has Full Control permi ssion. Members of the Ad- ministrators, Server Operat ors, P[...]

RPCS - Accessing the Printer Properties 71 2 C On the [ File ] menu, click [ Document Defaults... ] . The [ Default ] dialog box appears. D Make the necessary settings, and then click [ OK ] . Note ❒ S e t t i n g s y o u m a k e h e r e a r e u s e d a s t h e default settings for all applications. Reference For details, see the printer driver H[...]

Setting Up the Printer Driver 72 2[...]

73 3. Other Print Operations Printing a PDF File Directly You can send PDF files direc tly to the machine fo r printing, without having to open a PDF application. Important ❒ This function is possible on ly when the optional PostS cript 3 unit is installed. ❒ This function is possible for genuine Adobe PDF files only. ❒ Version 1.3, 1.4, and [...]

Other Print Operations 74 3 DeskTopBinder Lite Enhancements Follow the DeskTopBinder Lite enhancem ent procedure to print PDF files di- rectly. A On the [ Start ] menu, click [ Programs ] , [ DeskTopBinder ] , and [ Extended Feat ures Wizard ] . B When [ Extended Features Wizard ] appears, select [ Start ] , and then click [ Next> ] repeatedly u[...]

Printing a PDF File Directly 75 3 Printing PDF Password-Protected Documents Follow the procedure below to pr int password-protected PDF files. A In the Windows [ Start ] menu, click [ Programs ] , [ DeskTopBinder ] , and [ Extended Features Wizard ] . B When [ Extended Features Wizard ] appears, select [ Start ] , and then click [ Next> ] repeat[...]

Other Print Operations 76 3 PDF Direct Print Properties 1. Setting name: Displays the plug-in configuration name (up to 63 single byte characters) 2. Change Icon... Changes the icon displayed on the tool bar. 3. Printer: Displays a list of RPCS drivers that sup- port PDF direct printing. 4. Duplex Prints on both sides of sheets. 5. Layout Prints mu[...]

Printing a PDF File Directly 77 3 Using commands You can print PDF files directly, using commands such as “ftp” “sftp”and “lpr”. Reference For details about UNIX co mmands, see Network Guide.[...]

Other Print Operations 78 3 Unauthorized Copy Control You can embed patterns and text under printed text to prevent unauthorized copying of the document. Un authorized Copy Control consists of two functions: [ Data security fo r copying ] and [ Mask type: ] . Important ❒ This function is designed to discourage copying of confidential documents; i[...]

Unauthorized Copy Control 79 3 ❖ Printing a document using [ Data security for copying ] 1. The pattern and text you have set is printed. 2. The document is copied or stored in copiers / multifunction machines which the optional Copy Data Secu- rity unit is installed. 3. The document is blanked by gray overprint. Note ❒ When printing a docu men[...]

Other Print Operations 80 3 Using [ Mask type: ] You can embed patterns and text in a document by setting in the printer driver to prevent unauthorized copying. ❖ Setting [ Mask type: ] in the printer driver • Select a pattern from [ Mask ty pe: ] , and then enter text in the [ Text: ] box. • You can select overprint color from [ Black ] , [ [...]

Unauthorized Copy Control 81 3 Note ❒ Only the RPCS printer driver is supported. ❒ Printing at 200 × 200 dpi is not possible. ❒ You cannot partially embed patterns and text strings in a document. ❒ To make the embedded pattern clear, set the character size at least 50 pt (pref- erably 70 to 80 pt) and character an gle to between 3 0 and 40[...]

Other Print Operations 82 3 Using the Print Job Function This describes how to print files stored in the machine. The following types of printing can be selected using t he printer driv er: Sample Print, Locked Print, Hold Print, and Stored Print. You can print or delete the print jobs saved in the machine which is sent from computers. If you selec[...]

Using the Print Job Function 83 3 E Hold Print Job List Displays only Hold Print files stored in the machine. F Stored Print Job List Displays only Stored Print files stored in the machine. G Details Displays details about a selected file. H [ U Previous ] / [ T Next ] If the list of files doe s not fit on the scree n, scroll down to view t he list[...]

Other Print Operations 84 3 ❖ List Per User ID If you select [ List Per User ID ] from [ Initial Print Job List ] , the following screen appears: A User ID Displays the User IDs who sent files to the machine. B [ Clear ] Deselects a selection. C [ Exit ] Returns to the Printer s creen. D [ Complete List ] Displays all print jobs. E [ List Per Use[...]

Using the Print Job Function 85 3 Selecting the Initial Print Job List Follow the procedure below to set the in itial Print Jobs scr een, and to show it. Selecting the Initial Print Job List A Press the { User Tools/Counter } key. B Press [ Printer Features ] . The Printe r Features me nu appears C On the [ System ] tab, press [ Initial Print Jo b [...]

Other Print Operations 86 3 Printing from the Print Job Screen Explains Sample Print, Locked Prin t, Hold Print, and Stored Print. Sample Print Use this function to p rint only the first set of a multiple-set print job. After you have checked the result, remaining sets ca n be printed or canceled using the ma- chine's control panel. This can r[...]

Printing from the Print Job Screen 87 3 Printing a Sample Print File The following proced ure describes how to print a Sample Print file with the PCL 6 / 5c and the RPCS printer driver. For information about how to print a Sample Print file with the PostScript 3 printe r driver, see PostScript 3 Supplement in- cluded as a PDF file on the CD-ROM. Im[...]

Other Print Operations 88 3 F Select the file you want to print, and press [ Print ] . G Enter the new number of sets using the number keys. You can enter up to 999 sets. Press the { Clear/Stop } key to correct any entry mistakes. H Press [ Yes ] . The remain ing sets are pri nted. Press [ No ] to cancel printing. Note ❒ If you select mu ltiple f[...]

Printing from the Print Job Screen 89 3 Deleting Sample Print Files If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it agai n until the settings are suitable. A Press the { Printer } key to display the Printer screen. B Press [ Print Jobs ] . A list of the print files stored in the machin[...]

Other Print Operations 90 3 Locked Print Use this function to maintain privacy when printing confidential do cuments on the machine over a shared ne twork. Usually, it is possib le to pri nt data using the display panel once it is stored in this ma chine. When using Locked Print, it is not possible to print unless a password is entered on the machi[...]

Printing from the Print Job Screen 91 3 Printing a Locked Print File The following procedur e describes how to print a Locked Print file wi th the PCL 6/5c and the RPCS printer driver. For information about how to print a Locked Print file with the PostScript 3 printe r driver, see PostScript 3 Supplement in- cluded as a PDF file on the CD-ROM. Imp[...]

Other Print Operations 92 3 F Select the file you want to print, and then press [ Print ] . The password screen appears. G Enter the password using the number keys, and then press [ OK ] . The print confirmation screen appears. A confirmation screen will appear if the password is not entered correctly. Press [ Exit ] to enter the password again. If[...]

Printing from the Print Job Screen 93 3 Deleting Locked Print Files A Press the { Printer } key to display the Printer screen. B Press [ Print Jobs ] . C Press [ Locked Print Job List ] . A list of Locked Print files stored appears. Depending on the security settings, ce rtain print jobs may not be displayed. D Select the file you want to delete, a[...]

Other Print Operations 94 3 Hold Print Use this funct ion to tempor arily hold a file in the machine , and print it from th e computer or the machin e's control panel later. Important ❒ A Hold Print f ile cannot be stor ed if: • the total number of Sam ple Print, Locked Print, Hold Print, and Stored Print files in the ma chine is over 10 0[...]

Printing from the Print Job Screen 95 3 C Start printing from the application’s [ Print ] dialog box. The Hold Print job is sent to the machine and stored. D On the machine’s control panel, press the { Printer } key to display the printer screen. E Press [ Print Jobs ] . F Press [ Hold Print Job List ] . A list of a print files stored in the ma[...]

Other Print Operations 96 3 Note ❒ When printing is completed, the stored file is deleted. ❒ T o s t o p p r i n t i n g a f t e r p r inting has started, press [ Exit ] until th e Printer screen appears, and then press [ Job Reset ] . The file will be deleted. ❒ If you select mu ltiple file s, the confirma tion screen displ ays the total nu [...]

Printing from the Print Job Screen 97 3 Stored Print Use this function to store a file in the machine, and then print it from the com- puter or the machine' s control panel later. Jobs are not delete d after they are printed, so the same jo b need not be re-se nt in order to print multiple copies. Important ❒ A Stored Print file cannot be st[...]

Other Print Operations 98 3 A Configure Stored Print in th e printer driver’s properties. You can select two methods o f Stored Print: • [ Stored Print ] Stores the file in the printer and pr int it later using the display panel . • [ Store and Normal Print ] Prints the file at once and also stores the file in the machine. For details about c[...]

Printing from the Print Job Screen 99 3 G Select the file you want to print, and press [ Print ] . The confirmation screen appears. If you set a password in the print er driver, a password confirmation screen appears. Enter the password. If multiple print files are selected, an d some of these require a password, the machine prints files that corre[...]

Other Print Operations 100 3 ❒ Stored Print files that are sent to the machine are deleted only if you select [ Auto Delete Stored Print Jobs ] or select them for deletion (see “Printer Fea- tures ”, General Sett ings Guide). Reference For details about setting printer driver s, see the printer driver Help. You can also print or delete a Stor[...]

Printing from the Jobs Per User ID Screen 101 3 Printing from the Jobs Per User ID Screen This describes how to print the file s saved in the machine from the User ID screen. Printing the Selected Print Job A Press the { Printer } key. The Printer screen appears. B On the Printer screen, press [ Print Jobs ] . A list of user IDs whos e files ar e s[...]

Other Print Operations 102 3 D Press [ List Per User ID ] . The print job list of the selected user ID appears. E Select the desired print jobs. To cancel a selection, press the highlight ed print job again. To clear all selec- tions, press [ Clear All ] . F Press [ Print ] . The confirmation screen appears. G Press [ Yes ] . The selected files are[...]

Printing from the Jobs Per User ID Screen 103 3 Printing All Print Jobs A Press the { Printer } key. The Printer screen appears. B On the Printer screen, press [ Print Jobs ] . A list of user IDs whos e files ar e stored in the machine appe ars. C Press the user ID whose file you want to print. You cannot select multiple user IDs at the same time. [...]

Other Print Operations 104 3 E Select the desired print job type, and then press [ OK ] . The confirmation screen appears. The confirmation scr een does not appear if the selected ID ha s only one type of print jobs. F Press [ Yes ] . The selected files are printed. Note ❒ After printing is completed, Sample Print, Locked Print, and Hold Print fi[...]

Form Feed 105 3 Form Feed This section give s in structions for operating the ma chine when there is no tray for the selected paper size or type, or when paper l oaded in the machine has run out. Important ❒ The tray cannot be changed if the following functions are set: •S t a p l e •P u n c h • Duplex Print to a tray that does not suppo rt[...]

Other Print Operations 106 3 Canceling a Print Job Follow the procedur e below to cancel a print job if the message prompting form feed appears. A Press the { Printer } key. The Printer screen appears. B Press [ Job Reset ] or the { Clear/Stop } key. Delete the stored print jobs, and then cancel form feed. C Press [ Reset the Job ] to cancel the cu[...]

Canceling a Print Job 107 3 Canceling a Print Job This section gives instructio n to stop printing fro m the computer or the display panel. Canceling a Print Job Using the Control Panel A Press the { Printer } key. The Printer screen appears. B Press [ Job Reset ] . C Press [ Reset the Job ] or [ Reset All Jobs ] . • [ Reset the Job ] : cancels t[...]

Other Print Operations 108 3 Windows - Canceling a Print Job from the computer You can cancel a print job fr om the computer if transferri ng print jobs is not com- pleted. A Double-click the printer icon on the Windows task tray. A window appears, show ing all print jo bs currently queued for printing. Check the current status of the job you want [...]

Checking the Error Log 109 3 Checking the Error Log If files could not be stored due to printing errors, identify the cause of the errors by checking the error lo g on th e control panel. Important ❒ The most recent 30 errors are stor ed in the error log. If a new error is added when there are 30 errors already stored, the oldest error is deleted[...]

Other Print Operations 110 3 ❒ [ Error Log ] is not available in simplified di splay mode. To view the error log, you must first sw itch to norm al display mode by pressing { Simplified Display } to turn into the normal display mode.[...]

Spool Printing 111 3 Spool Printing Spool Printing allows print jobs transferred from a compu ter to be temporarily stored, and then prints them after they are transferred. This shortens printing time as it maximizes printer efficiency. Important ❒ During Spool Printing, the hard disk is accessed and the Data In indicator blinks. Turning off the [...]

Other Print Operations 112 3 User Defined Pages Using this function, you can specify th e page numbers for each input tray. Important ❒ This function is available with the PCL 6/5c printer driver only. ❒ If [ Document Server ] is selected under [ Job Type: ] , User Defined Page cannot be used. ❒ If [ User Defined Pages ] is sele cted under [ [...]

Printing with the Finisher 113 3 Printing with the Finisher You can collate, staple, or punch holes in printed paper by installing the optional finisher. Ma ke sure you read the fo llowi ng precautions when usi ng the optional finish er. Important ❒ Make option settings for the machine using the printer dr iver when bidirec- tional communicati on[...]

Other Print Operations 114 3 Staple With the optional Finisher SR3030, Bookl et Finisher SR3020 or Finisher SR790 in- stalled, sets can be stapled individu ally when printin g multiple sets. Staple Position The specified staple position varies depe nding on paper size, type, quantity and feed orientation. The foll owing table shows staple positions[...]

Printing with the Finisher 115 3 Stapling Precautions Important ❒ Stapling can be done only with the option al finisher installed. ❖ Staple printing will be canceled under the following conditions: • If the number of pages to staple exceeds maximum. • If a paper size that cannot be stapled is selected. • If a paper type that cannot be sta[...]

Other Print Operations 116 3 Punch With the optional Finisher SR3030 or Bo oklet Finisher SR3020 installed, holes can be punched into printed ou tput. Punch Position The specified punch position varies depe nding on paper feed and print data ori- entation. The follo wing table shows punc h positions: Note ❒ Punch positions will vary slightly from[...]

Printing with the Finisher 117 3 Punching Precautions Follow these precautions when using the punch function. Important ❒ To use this function , the optional Finisher S R3030 or Booklet Finisher SR3020 must be installed on the printer. ❖ Punch printing will be cancele d under the following conditions: • When a paper type that cann ot be punch[...]

Other Print Operations 118 3 Collate When printing multiple do cuments such as handouts for meetings, you can sep- arate sets into order. This function is known as “Collate”. Collate stores data transmitted from a computer to the printe r memory or hard disk drive. The fol- lowing are the three types of Collate: Important ❒ If Auto Continue o[...]

Printing with the Finisher 119 3 Rotating Collate Every other print set is rotated by 90 degrees. Important ❒ The Rotating Collate function requires two paper trays containing same size paper but in differ ent orientations. ❒ If the output tray has shift function, Sh ift Collate will be a pplied even if Ro- tating Collate is selected. ❖ When [...]

Other Print Operations 120 3 Shift Collate The optional finisher is re quired for thi s function. The finisher shift tr ay move s backward or forward when a job or set is output, causing the next to shift , so you can separate them. AEU018S[...]

Covers 121 3 Covers Using this function, you can in sert cover and back sheets fed from a di fferent tray to that of the main paper, an d print on them. Important ❒ To use this function, Collate must be set. Rotating Col late cannot be set. ❒ The cover sheets should be the same size and orientation as the body of the paper. ❖ Cover sheet Prin[...]

Other Print Operations 122 3 •B l a n k • When printing on e side • When printing bot h sides ❖ Front and Back Cover Sheet Prints the first and last page of the do cument as the cover and back cover pages. • Print on one side Prints on one side of the cover sheets only, even when duplex printing is selected. • Back cover page face insid[...]

Covers 123 3 • Cover sheet printed on one side, ba ck cover page face inside, and the number of pages is even • Cover sheet printed on one side, ba ck cover page face inside, and the number of pages is odd You can not print on th e outside of back cover page. •B l a n k • When printing on e side • When printing bot h sides AEV038S 1 AGP00[...]

Other Print Operations 124 3 Note ❒ If “Auto Tray Select” is set as the paper feed tray for the bo dy pap er, the paper w i l l b e d e l i v e r e d f r o m a t r a y c o n t a i n i n g p a p e r i n t h e K orientation. There- fore, if the cove r paper i s set to the L orientation, the orie ntation of cover and body will be different. Refe[...]

Chaptering 125 3 Chaptering The specified page is printed on the same side as the first page, like a book. Also, you can insert chapte r slip sheets before specifie d pages, and select whether or not to print on the slip sheet s. No slip sheets The specified page is always printed on the same side as the first page. Note ❒ This function is only v[...]

Other Print Operations 126 3 Inserting chapter slip sheets Insert chapter slip sheets before the specified pa ge. •P r i n t Prints on the chap ter slip sheets. When duplex printing is selected, both sides of the slip sheets are printed on. •B l a n k Note ❒ Up to 20 pages can be specified as th e front pages of chapters using the printer dri[...]

Slip Sheet 127 3 Slip Sheet ❖ Inserting a slip sheet between each page •P r i n t •B l a n k ❖ Inserting a slip sheet be tween OHP transparencies •P r i n t •B l a n k Note ❒ Collate cannot be set wh en using slip sheets. ❒ When the duplex printing or cover printing i s s e t , y o u c a n n o t insert slip sheets. ❒ The slip she [...]

128 4. Direct Printing from a Digital Camera (PictBridge) What is PictBridge? You can connect a PictBridge -compatible digital camera to this machine using a USB cable. This allows yo u to print photographs take n using t he digital ca mera directly by operating the digital camera. Before you can use this function, the machine requires the foll owi[...]

Direct Printing from a Di gital Camera (PictBridge) 129 4 PictBridge Printing Follow the procedure below to start Pi ctBridge printing on this machine. Important ❒ Do not disconnect the USB cable while da ta is being sent. If you do, printing will fail. ❒ The USB host interface boar d is suppl ied with a USB cable and a hook onto which you can [...]

PictBridge Printing 130 4 F The machine receives settings from the digital camera and starts printing. Note ❒ Since printing conditions are specified on the digital camera, specifiable parameters depend on the particular digital camera. For detai ls, see your digital camera's manual. ❒ Some digital cameras require settings fo r manual Pict[...]

Direct Printing from a Di gital Camera (PictBridge) 131 4 What Can Be Done on This Machine This machine can perfo rm the following functions using it s PictBridge featu re. The settings av ailable for th ese functions are as follows: • Single image printing • Selected image printing • All image printing • Index printing • Trimming • Dat[...]

What Can Be Done on This Machine 132 4 Index Printing ❖ A3 (297 × 420) ❖ A4 (210 × 497) ❖ A5 (148 × 210) ❖ Letter (8 1 / 2 × 11) ❖ B4 (257 × 367) Note ❒ Index printouts vary depend ing on the orientation of the paper placed on the specified size tray. ❒ Depending on the digital camera, a form feed ma y be inserted after one set o[...]

Direct Printing from a Di gital Camera (PictBridge) 133 4 Trimming Use this function to print only the inside of the trimming area specified on the digital camera. *1 -- Trimming area Date and File Name Printing Use this function to print the date and/or file name under the image. In the above figure, “aaaaa” indicates th e file name and “bbb[...]

What Can Be Done on This Machine 134 4 Paper Size Use this function to print on paper with the size specified on the digital camera. Note ❒ Specify Undefined Size for the 2L (5” × 7”), 100 mm × 150 mm, 4” × 6”, 8” × 10”, A6, B5, and B6 sizes. Paper size name Actual size 2L (5” × 7”) 178 mm × 127 mm (5 in. × 7 in.) Postcard [...]

Direct Printing from a Di gital Camera (PictBridge) 135 4 Image Print Size Use this function to print images with the size specified on the digital camera. -- indicates the image size specified on the camera. You can specify the following image print sizes: ❖ Fixed size •3 . 2 5 ” × 2.5” • 5” × 2.5” • 6” × 4” • 7” × 5”[...]

What Can Be Done on This Machine 136 4 Multi-Image-Layout Use this function to print multiple images on the specified paper. The number of images that can be pri nted on one page are as follows: The number and arrangement of images that can be specified are as follows: Paper size Number of images that can be specified 2L (5” × 7”) 2, 4, 8, 9 P[...]

Direct Printing from a Di gital Camera (PictBridge) 137 4 Note ❒ A form feed may be inserted between images depending on the digital cam- era in use. ❒ Printing in the specified way may not be possible depending on the specifica- tion for the number of imag es to be printed. Printing Quality Use this function to print images at the selected pri[...]

What Can Be Done on This Machine 138 4 Form Printing Use this function to print images in a predetermined layout format. Camera Memo Printing Use this function to prin t text data togeth er with an image if it is attached to the image. AGZ009S[...]

Direct Printing from a Di gital Camera (PictBridge) 139 4 Exiting PictBridge Follow the procedure below to quit the PictBridge mode. Important ❒ Do not disconnect the USB cable w hile da ta is being sent to the machine. If you do, printing will fail. A Check the display panel of this machine is displaying the “Ready” state. B Disconnect the U[...]

Other Reference Information 140 4 Other Reference Information For further details about prin ting on this machine, see th e following: Reference Fore details about paper size, paper type , or tray settings, see General Settin gs Guide.[...]

Direct Printing from a Di gital Camera (PictBridge) 141 4[...]

142 5. Saving and Printing Using the Document Server Accessing the Document Server The Document Server enables you to store documents on the machine's hard disk, allowing you to edit and print them as necessary. Important ❒ Applications with their own drivers, su ch as PageM aker, do not support this function. Note ❒ When you use the Docum[...]

Saving and Printing Using the Document Server 143 5[...]

144 6. The Functions and Settings of the Machine Mainframe Network Guide, PostScript 3 Sup plement, and UNIX Supplement cover all mod- els, and explain all necessary functions and se ttings. Th is chapter de scribes the functions and settings used for configuring the model you are using. Reference For details about functions and setting items, see [...]

The Functions and Settings of the Machine 145 6 List of the Setting Items Web Image Monitor The following table s show Web Image Monitor items t hat can be viewed or mod- ified depending on the select ed mode on the Web browser. Select one of the following mode s to log on Web Image Monitor: • User mode: logged on as a user • Administrator mode[...]

List of the Setting Items 146 6 ❖ Document Server •D o c u m e n t S e r v e r ❖ Fax Received File • Fax Received File ❖ Printer: Print Jobs •P r i n t J o b L i s t ❖ Job •J o b L i s t •P r i n t e r •F a x H i s t o r y •D o c u m e n t S e r v e r User mode Administrator mode Read/Modify Rea d/Modify User mode Administrato[...]

The Functions and Settings of the Machine 147 6 ❖ Address Book • Address List ❖ Configuration • Device Settings •P r i n t e r Menu User mode Administrator mode Address Book None Read/Modify Menu User mode Administrator mode System Read Read/Modify Paper Read Read/Modify Date/Time Read Read/Modify Timer Read Read/Modify Logs None Read/Mod[...]

List of the Setting Items 148 6 •F a x •I n t e r f a c e • Network •S e c u r i t y Menu User mode Administrator mode Environment Setting s None Read/Modify Send / Reception Settings None Read/Modify IP-Fax Settings None Read/Modify IP-Fax Gateway Settings None Read/Modify Parameter Settings None Read/Modify Menu User mode Administrator mo[...]

The Functions and Settings of the Machine 149 6 •R C G a t e •W e b p a g e • Extended Feature Settings Note ❒ Some items are not displayed depe nding on the security settings. telnet The following telnet can be used with the machine: access, appletalk, authfree, autonet, bonjour (rendezvous), btconfig, device- name, dhcp, diprint, dns, dom[...]

List of the Setting Items 150 6 Settings that can be used with PostScript 3 The following PostScript 3 settings can be used with the machine: Note ❒ Depending on a type of printer driver s, different items may be displayed. Settings Selectable Items Collate: Off, On Dithering: Auto, Phot ographic, Text, User Setting Duplex: O ff, Open to Left, Op[...]

The Functions and Settings of the Machine 151 6[...]

152 7. Appendix Specifications This section contains the machine's elec trical and hardware specificati ons, in- cluding information about its options. Component Specifications Resolution 600 × 600 dpi Printing speed Type 1: • Color: 35 ppm • B&W: 35 ppm Type 2: • Color: 40 ppm • B&W: 45 ppm (A4 K , 8 1 / 2 × 11 K plain paper[...]

Appendix 153 7 Note ❒ When using MacOS, use only the standa rd USB Inte rface. The optional USB interface board is not su pported. ❒ When using the USB Interface (Standard) with Mac OS 10.3.3, USB2.0 is sup- ported. ❒ When using the USB Interface (Standard) with Windows Me, install USB Printing Support. Windows Me on ly supports USB 1.1 speed[...]

Specifications 154 7 ❖ Required cable: 1394 interface cable (6 pin × 4 pin, 6 pin × 6 pin) Note ❒ You cannot plug devices togeth er to create loops. ❒ Do not use cable that is more than 4.5 meters in length. ❖ Data transfer speed: Maximum 400 Mbps ❖ Connectable number of devices on a bus: Maximum 63 ❖ Allowed cable hops on a bus: Maxi[...]

Appendix 155 7 ❖ Transmittable distance: 1 Mbps 400 m 2 Mbps 270 m 5.5 Mbps 200 m 11 Mbps 140 m Note ❒ These figures are a guideline for outdoo r use. In general, the transmittable distance indoors is 10 - 100 m, depending on e nvironment. ❖ Transmission mode: Ad hoc, and infrastructure mode Bluetooth Interface Unit Type 3245 ❖ Supported Pr[...]

156 INDEX B Bluetooth Interface Unit Type 3245 , 155 Bypass tray , 12 Custom size paper using the control panel , 14 setting the paper size using the control panel , 13 C Canceling a job Windows , 107 Changing the order of jobs , 6 Chaptering , 125 Checking Job History , 7 Checking jobs in the print queue , 5 Collate , 118 Control panel hold print [...]

157 EN USA B224-7507 O OHP Transparencies printing, bypass tray , 15 Operating system , 152 Options , 153 P PageMaker , 55 PDF Direct Print , 73 PictBridge , 128 Camera Memo Printing , 138 Color Matching , 137 Date and File Name Printing , 133 Exiting PictBridge , 13 9 Form Printing , 138 Image Print Size , 135 Index Print ing , 13 2 MultiImageLayo[...]

Note to users in the United States of Americ a Note: This equipment has been tested and fo und to comply wi th th e limits for a Class B digital device , pursu- ant to Part 15 of the FCC R ules. These limits ar e designe d to provide reasonable protection against harmful interference in a resid ential installation. Th is equipment generates, uses a[...]

Operating Instructions Printer Reference EN USA B224-7507[...]