Smeg ER12550EU инструкция обслуживания

Contents 18 1. INSTRUCTION S FOR SAF E AND PROP ER USE _______________ 19 2. POSIT IONING OF HOB ____________________________________ 21 3. ELECT RICAL CON NECTIO N _______________________________ 22 4. GAS CO NNECTION _______________________________________ 23 5. ADAPTAT ION TO DIFFER ENT TYPES O F GAS ________________ 25 6. FINAL O PERATIO NS ___[...]

Introduction 19 1. INSTR UCTIONS FOR SAFE AND PR OPER USE THIS MAN UAL I S AN INTEGR AL PART O F THE APPLIAN CE AN D THEREFOR E MUS T BE KEPT IN ITS ENT IRETY AND IN AN AC CESSIBL E PLACE FOR THE W HOLE WOR KING L IFE OF TH E COO KING HOB. WE ADVISE READIN G THIS M ANU AL AND ALL THE IN STRU CTIONS THERE IN BEFORE U SING TH E COOKIN G HOB. AL SO KE[...]

Introduction 20 THE IDE NTIFICATION PLAT E, WITH TECHNI CAL DATA, SERIA L NUMBER AND M ARKIN G IS C LEARL Y VISI BLE UND ER TH E CASIN G. THE PLATE ON THE CAS ING MUST NOT BE REMOVED. BEFORE C ONNECT ING THE D EVICE, M AKE SURE TH AT IT H AS BEEN REGULAT ED FOR TH E TYP E OF GA S THAT W ILL FEED I T, CH ECKING THE LABE L UNDER THE CASING. DO NOT PU[...]

Instructions for th e installer 21 2. POSITIONING OF HO B The followi ng operation r equir es building and/or carpen try work s o must be carried out by a compete nt trade sman. Installation can be c arried out on var ious materi als such as masonry , metal, sol id wood or plastic laminate d wood a s long as they ar e heat resistant (T 90°C). 2.1.[...]

Instructions for th e installer 22 3. ELECTRICAL CONNECTION Make sure t hat the vol tage an d capacity of t he power line co nform to the data shown on the p late located under th e casing. Do not remove this plate for any re ason. The plug on the end of the s upply cab le and the wall s ocket m ust be the same type and conform to the curr ent elec[...]

Instructions for th e installer 23 4. GAS CONNECTION Connectio n to the gas mains may be made with a rigid copper pipe or with a flexible pi pe and conf orming to t he provis ions defin ed by sta ndard regulations in force . To facilitate connectio n, fitting A on the rear of th e appliance m ay be adjusted l aterally. F or this p urpose, u ndo the[...]

Instructions for th e installer 24 4.1 Con nection to LPG Use a pre ssure regula tor and m ake the conn ection to t he ta nk accordi ng to the provision s of standards regulations in force. M ake sure that feed pressure co nforms to t he lev els show n in the t able in p aragrap h “5.2 Regulation for LPG”. 4.2 Ventilation of rooms The hob may b[...]

Instructions for th e installer 25 5. AD APT A TION T O DIFFERENT TYPES OF GAS Before performin g any cleaning or mai ntenance work, detach the appliance from the electrical sock et. The hob has been in spected for G 20 (2H) natural gas at a pressure of 20 mbar. For functi oning with other ty pes of gas the no zzles m ust be replaced and the primar[...]

Instructions for th e installer 26 5.2 Regulat ion for L PG Loosen screw A and push support B a ll the way. Us e a double he ad wrench to remov e nozzle C and ass emble the suit able one, followin g the instruct ions indicated i n the reference ch arts, with respe ct to the type of gas to us e. Th e scre wing torq ue of the n ozzl e shou ld ne ver [...]

Instructions for th e installer 27 5.3 Regulation for natural gas The hob has been in spected for G 20 (2H) natural gas at a pressure of 20 mbar. To allow t he unit to work wit h this t ype of ga s, perform the same operations de scribe d in paragraph “5. 2 Regulati on for LPG”, but choo se the nozzle s and regula te the primary air for natural[...]

Instructions for th e installer 28 6. FINAL OPERA TIONS Having carri ed out the above adju stments, reassem ble the applian ce following, b ackwards, the i nstruction s in paragraph “5.1 R emoving the hob”. 6.1 Regulat ion of min imum fo r natural g as Replace the component s on the burner and slide the knobs o n the gas ta p pins. Light the bu[...]

Instructions for th e installer 29 6.3 Arrangement of burners on hob BURNERS 1. Auxiliar y 2. Triple crown 3. Double crown 6.4 Lubrication of gas taps After a while, the gas tap may becom e hard to turn or lock. If this happens, it has to b e cleaned inside an d re-greased. This must be done by a quali fied technician.[...]

Instructions for th e user 30 7. USING THE HOB Make sure that th e flame-baffl e crowns, the cap s and the grid have b een assembled corre ctly. Grid A (supplied) sho uld be used for "woks" (Chinese p ots). Adapter B (su pplied) is to be used f or small vessels. 7.1 Ignition of the burners with safety device For each knob the correspon di[...]

Instructions for th e user 31 7.3 Diameter of containers BURNERS 1. Auxiliar y 2. Triple crown 3. Double crown Ø min. and max. (in cm) 7-18 22-26 12-34 8. CLEANING AND MAINTENANCE Before any intervention, disconnect the power supply of the device. 8.1 Cleaning Clean the cooking to p regularly e very time you us e it, obvi ously after i t has coole[...]

Instructions for th e user 32 8.2 Cleaning of cooking hob components Grids, caps , flame cap crowns and burner s can be removed for ea se of cleani ng. Wash t hem in warm water using a non-abrasi ve deterge nt, taking care to remove all tough s pots. Before rem ounting, allow the compone nts to fully dry o ut . 8.2.1 Ignition plugs and safety devic[...]